[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen master] xen/ppc: Add OPAL API definition header file



commit c99f57a783be85557790f21b0a972d58281a5d87
Author:     Shawn Anastasio <sanastasio@xxxxxxxxxxxxxxxxxxxxx>
AuthorDate: Tue Aug 8 09:39:37 2023 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Aug 8 09:39:37 2023 +0200

    xen/ppc: Add OPAL API definition header file
    
    OPAL (OpenPower Abstraction Layer) is the interface exposed by firmware
    on PowerNV (bare metal) systems. Import Linux's header definining the
    API and related information.
    
    From Linux commit 5321d1b1afb9a17302c6cec79f0cbf823eb0d3fc
    
    Signed-off-by: Shawn Anastasio <sanastasio@xxxxxxxxxxxxxxxxxxxxx>
    Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 xen/arch/ppc/include/asm/opal-api.h | 1190 +++++++++++++++++++++++++++++++++++
 1 file changed, 1190 insertions(+)

diff --git a/xen/arch/ppc/include/asm/opal-api.h 
b/xen/arch/ppc/include/asm/opal-api.h
new file mode 100644
index 0000000000..8790246f48
--- /dev/null
+++ b/xen/arch/ppc/include/asm/opal-api.h
@@ -0,0 +1,1190 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OPAL API definitions.
+ *
+ * Copyright 2011-2015 IBM Corp.
+ */
+
+#ifndef __OPAL_API_H
+#define __OPAL_API_H
+
+/****** OPAL APIs ******/
+
+/* Return codes */
+#define OPAL_SUCCESS           0
+#define OPAL_PARAMETER         -1
+#define OPAL_BUSY              -2
+#define OPAL_PARTIAL           -3
+#define OPAL_CONSTRAINED       -4
+#define OPAL_CLOSED            -5
+#define OPAL_HARDWARE          -6
+#define OPAL_UNSUPPORTED       -7
+#define OPAL_PERMISSION                -8
+#define OPAL_NO_MEM            -9
+#define OPAL_RESOURCE          -10
+#define OPAL_INTERNAL_ERROR    -11
+#define OPAL_BUSY_EVENT                -12
+#define OPAL_HARDWARE_FROZEN   -13
+#define OPAL_WRONG_STATE       -14
+#define OPAL_ASYNC_COMPLETION  -15
+#define OPAL_EMPTY             -16
+#define OPAL_I2C_TIMEOUT       -17
+#define OPAL_I2C_INVALID_CMD   -18
+#define OPAL_I2C_LBUS_PARITY   -19
+#define OPAL_I2C_BKEND_OVERRUN -20
+#define OPAL_I2C_BKEND_ACCESS  -21
+#define OPAL_I2C_ARBT_LOST     -22
+#define OPAL_I2C_NACK_RCVD     -23
+#define OPAL_I2C_STOP_ERR      -24
+#define OPAL_XIVE_PROVISIONING -31
+#define OPAL_XIVE_FREE_ACTIVE  -32
+#define OPAL_TIMEOUT           -33
+
+/* API Tokens (in r0) */
+#define OPAL_INVALID_CALL                     -1
+#define OPAL_TEST                              0
+#define OPAL_CONSOLE_WRITE                     1
+#define OPAL_CONSOLE_READ                      2
+#define OPAL_RTC_READ                          3
+#define OPAL_RTC_WRITE                         4
+#define OPAL_CEC_POWER_DOWN                    5
+#define OPAL_CEC_REBOOT                                6
+#define OPAL_READ_NVRAM                                7
+#define OPAL_WRITE_NVRAM                       8
+#define OPAL_HANDLE_INTERRUPT                  9
+#define OPAL_POLL_EVENTS                       10
+#define OPAL_PCI_SET_HUB_TCE_MEMORY            11
+#define OPAL_PCI_SET_PHB_TCE_MEMORY            12
+#define OPAL_PCI_CONFIG_READ_BYTE              13
+#define OPAL_PCI_CONFIG_READ_HALF_WORD         14
+#define OPAL_PCI_CONFIG_READ_WORD              15
+#define OPAL_PCI_CONFIG_WRITE_BYTE             16
+#define OPAL_PCI_CONFIG_WRITE_HALF_WORD                17
+#define OPAL_PCI_CONFIG_WRITE_WORD             18
+#define OPAL_SET_XIVE                          19
+#define OPAL_GET_XIVE                          20
+#define OPAL_GET_COMPLETION_TOKEN_STATUS       21 /* obsolete */
+#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER   22
+#define OPAL_PCI_EEH_FREEZE_STATUS             23
+#define OPAL_PCI_SHPC                          24
+#define OPAL_CONSOLE_WRITE_BUFFER_SPACE                25
+#define OPAL_PCI_EEH_FREEZE_CLEAR              26
+#define OPAL_PCI_PHB_MMIO_ENABLE               27
+#define OPAL_PCI_SET_PHB_MEM_WINDOW            28
+#define OPAL_PCI_MAP_PE_MMIO_WINDOW            29
+#define OPAL_PCI_SET_PHB_TABLE_MEMORY          30
+#define OPAL_PCI_SET_PE                                31
+#define OPAL_PCI_SET_PELTV                     32
+#define OPAL_PCI_SET_MVE                       33
+#define OPAL_PCI_SET_MVE_ENABLE                        34
+#define OPAL_PCI_GET_XIVE_REISSUE              35
+#define OPAL_PCI_SET_XIVE_REISSUE              36
+#define OPAL_PCI_SET_XIVE_PE                   37
+#define OPAL_GET_XIVE_SOURCE                   38
+#define OPAL_GET_MSI_32                                39
+#define OPAL_GET_MSI_64                                40
+#define OPAL_START_CPU                         41
+#define OPAL_QUERY_CPU_STATUS                  42
+#define OPAL_WRITE_OPPANEL                     43 /* unimplemented */
+#define OPAL_PCI_MAP_PE_DMA_WINDOW             44
+#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL                45
+#define OPAL_PCI_RESET                         49
+#define OPAL_PCI_GET_HUB_DIAG_DATA             50
+#define OPAL_PCI_GET_PHB_DIAG_DATA             51
+#define OPAL_PCI_FENCE_PHB                     52
+#define OPAL_PCI_REINIT                                53
+#define OPAL_PCI_MASK_PE_ERROR                 54
+#define OPAL_SET_SLOT_LED_STATUS               55
+#define OPAL_GET_EPOW_STATUS                   56
+#define OPAL_SET_SYSTEM_ATTENTION_LED          57
+#define OPAL_RESERVED1                         58
+#define OPAL_RESERVED2                         59
+#define OPAL_PCI_NEXT_ERROR                    60
+#define OPAL_PCI_EEH_FREEZE_STATUS2            61
+#define OPAL_PCI_POLL                          62
+#define OPAL_PCI_MSI_EOI                       63
+#define OPAL_PCI_GET_PHB_DIAG_DATA2            64
+#define OPAL_XSCOM_READ                                65
+#define OPAL_XSCOM_WRITE                       66
+#define OPAL_LPC_READ                          67
+#define OPAL_LPC_WRITE                         68
+#define OPAL_RETURN_CPU                                69
+#define OPAL_REINIT_CPUS                       70
+#define OPAL_ELOG_READ                         71
+#define OPAL_ELOG_WRITE                                72
+#define OPAL_ELOG_ACK                          73
+#define OPAL_ELOG_RESEND                       74
+#define OPAL_ELOG_SIZE                         75
+#define OPAL_FLASH_VALIDATE                    76
+#define OPAL_FLASH_MANAGE                      77
+#define OPAL_FLASH_UPDATE                      78
+#define OPAL_RESYNC_TIMEBASE                   79
+#define OPAL_CHECK_TOKEN                       80
+#define OPAL_DUMP_INIT                         81
+#define OPAL_DUMP_INFO                         82
+#define OPAL_DUMP_READ                         83
+#define OPAL_DUMP_ACK                          84
+#define OPAL_GET_MSG                           85
+#define OPAL_CHECK_ASYNC_COMPLETION            86
+#define OPAL_SYNC_HOST_REBOOT                  87
+#define OPAL_SENSOR_READ                       88
+#define OPAL_GET_PARAM                         89
+#define OPAL_SET_PARAM                         90
+#define OPAL_DUMP_RESEND                       91
+#define OPAL_ELOG_SEND                         92      /* Deprecated */
+#define OPAL_PCI_SET_PHB_CAPI_MODE             93
+#define OPAL_DUMP_INFO2                                94
+#define OPAL_WRITE_OPPANEL_ASYNC               95
+#define OPAL_PCI_ERR_INJECT                    96
+#define OPAL_PCI_EEH_FREEZE_SET                        97
+#define OPAL_HANDLE_HMI                                98
+#define OPAL_CONFIG_CPU_IDLE_STATE             99
+#define OPAL_SLW_SET_REG                       100
+#define OPAL_REGISTER_DUMP_REGION              101
+#define OPAL_UNREGISTER_DUMP_REGION            102
+#define OPAL_WRITE_TPO                         103
+#define OPAL_READ_TPO                          104
+#define OPAL_GET_DPO_STATUS                    105
+#define OPAL_OLD_I2C_REQUEST                   106     /* Deprecated */
+#define OPAL_IPMI_SEND                         107
+#define OPAL_IPMI_RECV                         108
+#define OPAL_I2C_REQUEST                       109
+#define OPAL_FLASH_READ                                110
+#define OPAL_FLASH_WRITE                       111
+#define OPAL_FLASH_ERASE                       112
+#define OPAL_PRD_MSG                           113
+#define OPAL_LEDS_GET_INDICATOR                        114
+#define OPAL_LEDS_SET_INDICATOR                        115
+#define OPAL_CEC_REBOOT2                       116
+#define OPAL_CONSOLE_FLUSH                     117
+#define OPAL_GET_DEVICE_TREE                   118
+#define OPAL_PCI_GET_PRESENCE_STATE            119
+#define OPAL_PCI_GET_POWER_STATE               120
+#define OPAL_PCI_SET_POWER_STATE               121
+#define OPAL_INT_GET_XIRR                      122
+#define        OPAL_INT_SET_CPPR                       123
+#define OPAL_INT_EOI                           124
+#define OPAL_INT_SET_MFRR                      125
+#define OPAL_PCI_TCE_KILL                      126
+#define OPAL_NMMU_SET_PTCR                     127
+#define OPAL_XIVE_RESET                                128
+#define OPAL_XIVE_GET_IRQ_INFO                 129
+#define OPAL_XIVE_GET_IRQ_CONFIG               130
+#define OPAL_XIVE_SET_IRQ_CONFIG               131
+#define OPAL_XIVE_GET_QUEUE_INFO               132
+#define OPAL_XIVE_SET_QUEUE_INFO               133
+#define OPAL_XIVE_DONATE_PAGE                  134
+#define OPAL_XIVE_ALLOCATE_VP_BLOCK            135
+#define OPAL_XIVE_FREE_VP_BLOCK                        136
+#define OPAL_XIVE_GET_VP_INFO                  137
+#define OPAL_XIVE_SET_VP_INFO                  138
+#define OPAL_XIVE_ALLOCATE_IRQ                 139
+#define OPAL_XIVE_FREE_IRQ                     140
+#define OPAL_XIVE_SYNC                         141
+#define OPAL_XIVE_DUMP                         142
+#define OPAL_XIVE_GET_QUEUE_STATE              143
+#define OPAL_XIVE_SET_QUEUE_STATE              144
+#define OPAL_SIGNAL_SYSTEM_RESET               145
+#define OPAL_NPU_INIT_CONTEXT                  146
+#define OPAL_NPU_DESTROY_CONTEXT               147
+#define OPAL_NPU_MAP_LPAR                      148
+#define OPAL_IMC_COUNTERS_INIT                 149
+#define OPAL_IMC_COUNTERS_START                        150
+#define OPAL_IMC_COUNTERS_STOP                 151
+#define OPAL_GET_POWERCAP                      152
+#define OPAL_SET_POWERCAP                      153
+#define OPAL_GET_POWER_SHIFT_RATIO             154
+#define OPAL_SET_POWER_SHIFT_RATIO             155
+#define OPAL_SENSOR_GROUP_CLEAR                        156
+#define OPAL_PCI_SET_P2P                       157
+#define OPAL_QUIESCE                           158
+#define OPAL_NPU_SPA_SETUP                     159
+#define OPAL_NPU_SPA_CLEAR_CACHE               160
+#define OPAL_NPU_TL_SET                                161
+#define OPAL_SENSOR_READ_U64                   162
+#define OPAL_SENSOR_GROUP_ENABLE               163
+#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR           164
+#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR           165
+#define OPAL_HANDLE_HMI2                       166
+#define        OPAL_NX_COPROC_INIT                     167
+#define OPAL_XIVE_GET_VP_STATE                 170
+#define OPAL_MPIPL_UPDATE                      173
+#define OPAL_MPIPL_REGISTER_TAG                        174
+#define OPAL_MPIPL_QUERY_TAG                   175
+#define OPAL_SECVAR_GET                                176
+#define OPAL_SECVAR_GET_NEXT                   177
+#define OPAL_SECVAR_ENQUEUE_UPDATE             178
+#define OPAL_LAST                              178
+
+#define QUIESCE_HOLD                   1 /* Spin all calls at entry */
+#define QUIESCE_REJECT                 2 /* Fail all calls with OPAL_BUSY */
+#define QUIESCE_LOCK_BREAK             3 /* Set to ignore locks. */
+#define QUIESCE_RESUME                 4 /* Un-quiesce */
+#define QUIESCE_RESUME_FAST_REBOOT     5 /* Un-quiesce, fast reboot */
+
+/* Device tree flags */
+
+/*
+ * Flags set in power-mgmt nodes in device tree describing
+ * idle states that are supported in the platform.
+ */
+
+#define OPAL_PM_TIMEBASE_STOP          0x00000002
+#define OPAL_PM_LOSE_HYP_CONTEXT       0x00002000
+#define OPAL_PM_LOSE_FULL_CONTEXT      0x00004000
+#define OPAL_PM_NAP_ENABLED            0x00010000
+#define OPAL_PM_SLEEP_ENABLED          0x00020000
+#define OPAL_PM_WINKLE_ENABLED         0x00040000
+#define OPAL_PM_SLEEP_ENABLED_ER1      0x00080000 /* with workaround */
+#define OPAL_PM_STOP_INST_FAST         0x00100000
+#define OPAL_PM_STOP_INST_DEEP         0x00200000
+
+/*
+ * OPAL_CONFIG_CPU_IDLE_STATE parameters
+ */
+#define OPAL_CONFIG_IDLE_FASTSLEEP     1
+#define OPAL_CONFIG_IDLE_UNDO          0
+#define OPAL_CONFIG_IDLE_APPLY         1
+
+#ifndef __ASSEMBLY__
+
+#include <xen/types.h>
+
+/* Other enums */
+enum OpalFreezeState {
+       OPAL_EEH_STOPPED_NOT_FROZEN = 0,
+       OPAL_EEH_STOPPED_MMIO_FREEZE = 1,
+       OPAL_EEH_STOPPED_DMA_FREEZE = 2,
+       OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3,
+       OPAL_EEH_STOPPED_RESET = 4,
+       OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5,
+       OPAL_EEH_STOPPED_PERM_UNAVAIL = 6
+};
+
+enum OpalEehFreezeActionToken {
+       OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1,
+       OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2,
+       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3,
+
+       OPAL_EEH_ACTION_SET_FREEZE_MMIO = 1,
+       OPAL_EEH_ACTION_SET_FREEZE_DMA  = 2,
+       OPAL_EEH_ACTION_SET_FREEZE_ALL  = 3
+};
+
+enum OpalPciStatusToken {
+       OPAL_EEH_NO_ERROR       = 0,
+       OPAL_EEH_IOC_ERROR      = 1,
+       OPAL_EEH_PHB_ERROR      = 2,
+       OPAL_EEH_PE_ERROR       = 3,
+       OPAL_EEH_PE_MMIO_ERROR  = 4,
+       OPAL_EEH_PE_DMA_ERROR   = 5
+};
+
+enum OpalPciErrorSeverity {
+       OPAL_EEH_SEV_NO_ERROR   = 0,
+       OPAL_EEH_SEV_IOC_DEAD   = 1,
+       OPAL_EEH_SEV_PHB_DEAD   = 2,
+       OPAL_EEH_SEV_PHB_FENCED = 3,
+       OPAL_EEH_SEV_PE_ER      = 4,
+       OPAL_EEH_SEV_INF        = 5
+};
+
+enum OpalErrinjectType {
+       OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR        = 0,
+       OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64      = 1,
+};
+
+enum OpalErrinjectFunc {
+       /* IOA bus specific errors */
+       OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR    = 0,
+       OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_DATA    = 1,
+       OPAL_ERR_INJECT_FUNC_IOA_LD_IO_ADDR     = 2,
+       OPAL_ERR_INJECT_FUNC_IOA_LD_IO_DATA     = 3,
+       OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_ADDR    = 4,
+       OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_DATA    = 5,
+       OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_ADDR    = 6,
+       OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_DATA    = 7,
+       OPAL_ERR_INJECT_FUNC_IOA_ST_IO_ADDR     = 8,
+       OPAL_ERR_INJECT_FUNC_IOA_ST_IO_DATA     = 9,
+       OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_ADDR    = 10,
+       OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_DATA    = 11,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_ADDR    = 12,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_DATA    = 13,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_MASTER  = 14,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_TARGET  = 15,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_ADDR    = 16,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_DATA    = 17,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_MASTER  = 18,
+       OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET  = 19,
+};
+
+enum OpalMmioWindowType {
+       OPAL_M32_WINDOW_TYPE = 1,
+       OPAL_M64_WINDOW_TYPE = 2,
+       OPAL_IO_WINDOW_TYPE  = 3
+};
+
+enum OpalExceptionHandler {
+       OPAL_MACHINE_CHECK_HANDLER          = 1,
+       OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2,
+       OPAL_SOFTPATCH_HANDLER              = 3
+};
+
+enum OpalPendingState {
+       OPAL_EVENT_OPAL_INTERNAL   = 0x1,
+       OPAL_EVENT_NVRAM           = 0x2,
+       OPAL_EVENT_RTC             = 0x4,
+       OPAL_EVENT_CONSOLE_OUTPUT  = 0x8,
+       OPAL_EVENT_CONSOLE_INPUT   = 0x10,
+       OPAL_EVENT_ERROR_LOG_AVAIL = 0x20,
+       OPAL_EVENT_ERROR_LOG       = 0x40,
+       OPAL_EVENT_EPOW            = 0x80,
+       OPAL_EVENT_LED_STATUS      = 0x100,
+       OPAL_EVENT_PCI_ERROR       = 0x200,
+       OPAL_EVENT_DUMP_AVAIL      = 0x400,
+       OPAL_EVENT_MSG_PENDING     = 0x800,
+};
+
+enum OpalThreadStatus {
+       OPAL_THREAD_INACTIVE = 0x0,
+       OPAL_THREAD_STARTED = 0x1,
+       OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */
+};
+
+enum OpalPciBusCompare {
+       OpalPciBusAny   = 0,    /* Any bus number match */
+       OpalPciBus3Bits = 2,    /* Match top 3 bits of bus number */
+       OpalPciBus4Bits = 3,    /* Match top 4 bits of bus number */
+       OpalPciBus5Bits = 4,    /* Match top 5 bits of bus number */
+       OpalPciBus6Bits = 5,    /* Match top 6 bits of bus number */
+       OpalPciBus7Bits = 6,    /* Match top 7 bits of bus number */
+       OpalPciBusAll   = 7,    /* Match bus number exactly */
+};
+
+enum OpalDeviceCompare {
+       OPAL_IGNORE_RID_DEVICE_NUMBER = 0,
+       OPAL_COMPARE_RID_DEVICE_NUMBER = 1
+};
+
+enum OpalFuncCompare {
+       OPAL_IGNORE_RID_FUNCTION_NUMBER = 0,
+       OPAL_COMPARE_RID_FUNCTION_NUMBER = 1
+};
+
+enum OpalPeAction {
+       OPAL_UNMAP_PE = 0,
+       OPAL_MAP_PE = 1
+};
+
+enum OpalPeltvAction {
+       OPAL_REMOVE_PE_FROM_DOMAIN = 0,
+       OPAL_ADD_PE_TO_DOMAIN = 1
+};
+
+enum OpalMveEnableAction {
+       OPAL_DISABLE_MVE = 0,
+       OPAL_ENABLE_MVE = 1
+};
+
+enum OpalM64Action {
+       OPAL_DISABLE_M64 = 0,
+       OPAL_ENABLE_M64_SPLIT = 1,
+       OPAL_ENABLE_M64_NON_SPLIT = 2
+};
+
+enum OpalPciResetScope {
+       OPAL_RESET_PHB_COMPLETE         = 1,
+       OPAL_RESET_PCI_LINK             = 2,
+       OPAL_RESET_PHB_ERROR            = 3,
+       OPAL_RESET_PCI_HOT              = 4,
+       OPAL_RESET_PCI_FUNDAMENTAL      = 5,
+       OPAL_RESET_PCI_IODA_TABLE       = 6
+};
+
+enum OpalPciReinitScope {
+       /*
+        * Note: we chose values that do not overlap
+        * OpalPciResetScope as OPAL v2 used the same
+        * enum for both
+        */
+       OPAL_REINIT_PCI_DEV = 1000
+};
+
+enum OpalPciResetState {
+       OPAL_DEASSERT_RESET = 0,
+       OPAL_ASSERT_RESET   = 1
+};
+
+enum OpalPciSlotPresence {
+       OPAL_PCI_SLOT_EMPTY     = 0,
+       OPAL_PCI_SLOT_PRESENT   = 1
+};
+
+enum OpalPciSlotPower {
+       OPAL_PCI_SLOT_POWER_OFF = 0,
+       OPAL_PCI_SLOT_POWER_ON  = 1,
+       OPAL_PCI_SLOT_OFFLINE   = 2,
+       OPAL_PCI_SLOT_ONLINE    = 3
+};
+
+enum OpalSlotLedType {
+       OPAL_SLOT_LED_TYPE_ID = 0,      /* IDENTIFY LED */
+       OPAL_SLOT_LED_TYPE_FAULT = 1,   /* FAULT LED */
+       OPAL_SLOT_LED_TYPE_ATTN = 2,    /* System Attention LED */
+       OPAL_SLOT_LED_TYPE_MAX = 3
+};
+
+enum OpalSlotLedState {
+       OPAL_SLOT_LED_STATE_OFF = 0,    /* LED is OFF */
+       OPAL_SLOT_LED_STATE_ON = 1      /* LED is ON */
+};
+
+/*
+ * Address cycle types for LPC accesses. These also correspond
+ * to the content of the first cell of the "reg" property for
+ * device nodes on the LPC bus
+ */
+enum OpalLPCAddressType {
+       OPAL_LPC_MEM    = 0,
+       OPAL_LPC_IO     = 1,
+       OPAL_LPC_FW     = 2,
+};
+
+enum opal_msg_type {
+       OPAL_MSG_ASYNC_COMP     = 0,    /* params[0] = token, params[1] = rc,
+                                        * additional params function-specific
+                                        */
+       OPAL_MSG_MEM_ERR        = 1,
+       OPAL_MSG_EPOW           = 2,
+       OPAL_MSG_SHUTDOWN       = 3,    /* params[0] = 1 reboot, 0 shutdown */
+       OPAL_MSG_HMI_EVT        = 4,
+       OPAL_MSG_DPO            = 5,
+       OPAL_MSG_PRD            = 6,
+       OPAL_MSG_OCC            = 7,
+       OPAL_MSG_PRD2           = 8,
+       OPAL_MSG_TYPE_MAX,
+};
+
+struct opal_msg {
+       __be32 msg_type;
+       __be32 reserved;
+       __be64 params[8];
+};
+
+/* System parameter permission */
+enum OpalSysparamPerm {
+       OPAL_SYSPARAM_READ  = 0x1,
+       OPAL_SYSPARAM_WRITE = 0x2,
+       OPAL_SYSPARAM_RW    = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE),
+};
+
+enum {
+       OPAL_IPMI_MSG_FORMAT_VERSION_1 = 1,
+};
+
+struct opal_ipmi_msg {
+       uint8_t version;
+       uint8_t netfn;
+       uint8_t cmd;
+       uint8_t data[];
+};
+
+/* FSP memory errors handling */
+enum OpalMemErr_Version {
+       OpalMemErr_V1 = 1,
+};
+
+enum OpalMemErrType {
+       OPAL_MEM_ERR_TYPE_RESILIENCE    = 0,
+       OPAL_MEM_ERR_TYPE_DYN_DALLOC,
+};
+
+/* Memory Reilience error type */
+enum OpalMemErr_ResilErrType {
+       OPAL_MEM_RESILIENCE_CE          = 0,
+       OPAL_MEM_RESILIENCE_UE,
+       OPAL_MEM_RESILIENCE_UE_SCRUB,
+};
+
+/* Dynamic Memory Deallocation type */
+enum OpalMemErr_DynErrType {
+       OPAL_MEM_DYNAMIC_DEALLOC        = 0,
+};
+
+struct OpalMemoryErrorData {
+       enum OpalMemErr_Version version:8;      /* 0x00 */
+       enum OpalMemErrType     type:8;         /* 0x01 */
+       __be16                  flags;          /* 0x02 */
+       uint8_t                 reserved_1[4];  /* 0x04 */
+
+       union {
+               /* Memory Resilience corrected/uncorrected error info */
+               struct {
+                       enum OpalMemErr_ResilErrType    resil_err_type:8;
+                       uint8_t                         reserved_1[7];
+                       __be64                          physical_address_start;
+                       __be64                          physical_address_end;
+               } resilience;
+               /* Dynamic memory deallocation error info */
+               struct {
+                       enum OpalMemErr_DynErrType      dyn_err_type:8;
+                       uint8_t                         reserved_1[7];
+                       __be64                          physical_address_start;
+                       __be64                          physical_address_end;
+               } dyn_dealloc;
+       } u;
+};
+
+/* HMI interrupt event */
+enum OpalHMI_Version {
+       OpalHMIEvt_V1 = 1,
+       OpalHMIEvt_V2 = 2,
+};
+
+enum OpalHMI_Severity {
+       OpalHMI_SEV_NO_ERROR = 0,
+       OpalHMI_SEV_WARNING = 1,
+       OpalHMI_SEV_ERROR_SYNC = 2,
+       OpalHMI_SEV_FATAL = 3,
+};
+
+enum OpalHMI_Disposition {
+       OpalHMI_DISPOSITION_RECOVERED = 0,
+       OpalHMI_DISPOSITION_NOT_RECOVERED = 1,
+};
+
+enum OpalHMI_ErrType {
+       OpalHMI_ERROR_MALFUNC_ALERT     = 0,
+       OpalHMI_ERROR_PROC_RECOV_DONE,
+       OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN,
+       OpalHMI_ERROR_PROC_RECOV_MASKED,
+       OpalHMI_ERROR_TFAC,
+       OpalHMI_ERROR_TFMR_PARITY,
+       OpalHMI_ERROR_HA_OVERFLOW_WARN,
+       OpalHMI_ERROR_XSCOM_FAIL,
+       OpalHMI_ERROR_XSCOM_DONE,
+       OpalHMI_ERROR_SCOM_FIR,
+       OpalHMI_ERROR_DEBUG_TRIG_FIR,
+       OpalHMI_ERROR_HYP_RESOURCE,
+       OpalHMI_ERROR_CAPP_RECOVERY,
+};
+
+enum OpalHMI_XstopType {
+       CHECKSTOP_TYPE_UNKNOWN  =       0,
+       CHECKSTOP_TYPE_CORE     =       1,
+       CHECKSTOP_TYPE_NX       =       2,
+       CHECKSTOP_TYPE_NPU      =       3
+};
+
+enum OpalHMI_CoreXstopReason {
+       CORE_CHECKSTOP_IFU_REGFILE              = 0x00000001,
+       CORE_CHECKSTOP_IFU_LOGIC                = 0x00000002,
+       CORE_CHECKSTOP_PC_DURING_RECOV          = 0x00000004,
+       CORE_CHECKSTOP_ISU_REGFILE              = 0x00000008,
+       CORE_CHECKSTOP_ISU_LOGIC                = 0x00000010,
+       CORE_CHECKSTOP_FXU_LOGIC                = 0x00000020,
+       CORE_CHECKSTOP_VSU_LOGIC                = 0x00000040,
+       CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE   = 0x00000080,
+       CORE_CHECKSTOP_LSU_REGFILE              = 0x00000100,
+       CORE_CHECKSTOP_PC_FWD_PROGRESS          = 0x00000200,
+       CORE_CHECKSTOP_LSU_LOGIC                = 0x00000400,
+       CORE_CHECKSTOP_PC_LOGIC                 = 0x00000800,
+       CORE_CHECKSTOP_PC_HYP_RESOURCE          = 0x00001000,
+       CORE_CHECKSTOP_PC_HANG_RECOV_FAILED     = 0x00002000,
+       CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED    = 0x00004000,
+       CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ    = 0x00008000,
+       CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ      = 0x00010000,
+};
+
+enum OpalHMI_NestAccelXstopReason {
+       NX_CHECKSTOP_SHM_INVAL_STATE_ERR        = 0x00000001,
+       NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1      = 0x00000002,
+       NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2      = 0x00000004,
+       NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR    = 0x00000008,
+       NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR    = 0x00000010,
+       NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR    = 0x00000020,
+       NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR    = 0x00000040,
+       NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR    = 0x00000080,
+       NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR    = 0x00000100,
+       NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR    = 0x00000200,
+       NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR    = 0x00000400,
+       NX_CHECKSTOP_DMA_CRB_UE                 = 0x00000800,
+       NX_CHECKSTOP_DMA_CRB_SUE                = 0x00001000,
+       NX_CHECKSTOP_PBI_ISN_UE                 = 0x00002000,
+};
+
+struct OpalHMIEvent {
+       uint8_t         version;        /* 0x00 */
+       uint8_t         severity;       /* 0x01 */
+       uint8_t         type;           /* 0x02 */
+       uint8_t         disposition;    /* 0x03 */
+       uint8_t         reserved_1[4];  /* 0x04 */
+
+       __be64          hmer;
+       /* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
+       __be64          tfmr;
+
+       /* version 2 and later */
+       union {
+               /*
+                * checkstop info (Core/NX).
+                * Valid for OpalHMI_ERROR_MALFUNC_ALERT.
+                */
+               struct {
+                       uint8_t xstop_type;     /* enum OpalHMI_XstopType */
+                       uint8_t reserved_1[3];
+                       __be32  xstop_reason;
+                       union {
+                               __be32 pir;     /* for CHECKSTOP_TYPE_CORE */
+                               __be32 chip_id; /* for CHECKSTOP_TYPE_NX */
+                       } u;
+               } xstop_error;
+       } u;
+};
+
+/* OPAL_HANDLE_HMI2 out_flags */
+enum {
+       OPAL_HMI_FLAGS_TB_RESYNC        = (1ull << 0), /* Timebase has been 
resynced */
+       OPAL_HMI_FLAGS_DEC_LOST         = (1ull << 1), /* DEC lost, needs to be 
reprogrammed */
+       OPAL_HMI_FLAGS_HDEC_LOST        = (1ull << 2), /* HDEC lost, needs to 
be reprogrammed */
+       OPAL_HMI_FLAGS_TOD_TB_FAIL      = (1ull << 3), /* TOD/TB recovery 
failed. */
+       OPAL_HMI_FLAGS_NEW_EVENT        = (1ull << 63), /* An event has been 
created */
+};
+
+enum {
+       OPAL_P7IOC_DIAG_TYPE_NONE       = 0,
+       OPAL_P7IOC_DIAG_TYPE_RGC        = 1,
+       OPAL_P7IOC_DIAG_TYPE_BI         = 2,
+       OPAL_P7IOC_DIAG_TYPE_CI         = 3,
+       OPAL_P7IOC_DIAG_TYPE_MISC       = 4,
+       OPAL_P7IOC_DIAG_TYPE_I2C        = 5,
+       OPAL_P7IOC_DIAG_TYPE_LAST       = 6
+};
+
+struct OpalIoP7IOCErrorData {
+       __be16 type;
+
+       /* GEM */
+       __be64 gemXfir;
+       __be64 gemRfir;
+       __be64 gemRirqfir;
+       __be64 gemMask;
+       __be64 gemRwof;
+
+       /* LEM */
+       __be64 lemFir;
+       __be64 lemErrMask;
+       __be64 lemAction0;
+       __be64 lemAction1;
+       __be64 lemWof;
+
+       union {
+               struct OpalIoP7IOCRgcErrorData {
+                       __be64 rgcStatus;       /* 3E1C10 */
+                       __be64 rgcLdcp;         /* 3E1C18 */
+               }rgc;
+               struct OpalIoP7IOCBiErrorData {
+                       __be64 biLdcp0;         /* 3C0100, 3C0118 */
+                       __be64 biLdcp1;         /* 3C0108, 3C0120 */
+                       __be64 biLdcp2;         /* 3C0110, 3C0128 */
+                       __be64 biFenceStatus;   /* 3C0130, 3C0130 */
+
+                       uint8_t biDownbound;    /* BI Downbound or Upbound */
+               }bi;
+               struct OpalIoP7IOCCiErrorData {
+                       __be64 ciPortStatus;    /* 3Dn008 */
+                       __be64 ciPortLdcp;      /* 3Dn010 */
+
+                       uint8_t ciPort;         /* Index of CI port: 0/1 */
+               }ci;
+       };
+};
+
+/**
+ * This structure defines the overlay which will be used to store PHB error
+ * data upon request.
+ */
+enum {
+       OPAL_PHB_ERROR_DATA_VERSION_1 = 1,
+};
+
+enum {
+       OPAL_PHB_ERROR_DATA_TYPE_P7IOC = 1,
+       OPAL_PHB_ERROR_DATA_TYPE_PHB3 = 2,
+       OPAL_PHB_ERROR_DATA_TYPE_PHB4 = 3
+};
+
+enum {
+       OPAL_P7IOC_NUM_PEST_REGS = 128,
+       OPAL_PHB3_NUM_PEST_REGS = 256,
+       OPAL_PHB4_NUM_PEST_REGS = 512
+};
+
+struct OpalIoPhbErrorCommon {
+       __be32 version;
+       __be32 ioType;
+       __be32 len;
+};
+
+struct OpalIoP7IOCPhbErrorData {
+       struct OpalIoPhbErrorCommon common;
+
+       __be32 brdgCtl;
+
+       // P7IOC utl regs
+       __be32 portStatusReg;
+       __be32 rootCmplxStatus;
+       __be32 busAgentStatus;
+
+       // P7IOC cfg regs
+       __be32 deviceStatus;
+       __be32 slotStatus;
+       __be32 linkStatus;
+       __be32 devCmdStatus;
+       __be32 devSecStatus;
+
+       // cfg AER regs
+       __be32 rootErrorStatus;
+       __be32 uncorrErrorStatus;
+       __be32 corrErrorStatus;
+       __be32 tlpHdr1;
+       __be32 tlpHdr2;
+       __be32 tlpHdr3;
+       __be32 tlpHdr4;
+       __be32 sourceId;
+
+       __be32 rsv3;
+
+       // Record data about the call to allocate a buffer.
+       __be64 errorClass;
+       __be64 correlator;
+
+       //P7IOC MMIO Error Regs
+       __be64 p7iocPlssr;                // n120
+       __be64 p7iocCsr;                  // n110
+       __be64 lemFir;                    // nC00
+       __be64 lemErrorMask;              // nC18
+       __be64 lemWOF;                    // nC40
+       __be64 phbErrorStatus;            // nC80
+       __be64 phbFirstErrorStatus;       // nC88
+       __be64 phbErrorLog0;              // nCC0
+       __be64 phbErrorLog1;              // nCC8
+       __be64 mmioErrorStatus;           // nD00
+       __be64 mmioFirstErrorStatus;      // nD08
+       __be64 mmioErrorLog0;             // nD40
+       __be64 mmioErrorLog1;             // nD48
+       __be64 dma0ErrorStatus;           // nD80
+       __be64 dma0FirstErrorStatus;      // nD88
+       __be64 dma0ErrorLog0;             // nDC0
+       __be64 dma0ErrorLog1;             // nDC8
+       __be64 dma1ErrorStatus;           // nE00
+       __be64 dma1FirstErrorStatus;      // nE08
+       __be64 dma1ErrorLog0;             // nE40
+       __be64 dma1ErrorLog1;             // nE48
+       __be64 pestA[OPAL_P7IOC_NUM_PEST_REGS];
+       __be64 pestB[OPAL_P7IOC_NUM_PEST_REGS];
+};
+
+struct OpalIoPhb3ErrorData {
+       struct OpalIoPhbErrorCommon common;
+
+       __be32 brdgCtl;
+
+       /* PHB3 UTL regs */
+       __be32 portStatusReg;
+       __be32 rootCmplxStatus;
+       __be32 busAgentStatus;
+
+       /* PHB3 cfg regs */
+       __be32 deviceStatus;
+       __be32 slotStatus;
+       __be32 linkStatus;
+       __be32 devCmdStatus;
+       __be32 devSecStatus;
+
+       /* cfg AER regs */
+       __be32 rootErrorStatus;
+       __be32 uncorrErrorStatus;
+       __be32 corrErrorStatus;
+       __be32 tlpHdr1;
+       __be32 tlpHdr2;
+       __be32 tlpHdr3;
+       __be32 tlpHdr4;
+       __be32 sourceId;
+
+       __be32 rsv3;
+
+       /* Record data about the call to allocate a buffer */
+       __be64 errorClass;
+       __be64 correlator;
+
+       /* PHB3 MMIO Error Regs */
+       __be64 nFir;                    /* 000 */
+       __be64 nFirMask;                /* 003 */
+       __be64 nFirWOF;         /* 008 */
+       __be64 phbPlssr;                /* 120 */
+       __be64 phbCsr;          /* 110 */
+       __be64 lemFir;          /* C00 */
+       __be64 lemErrorMask;            /* C18 */
+       __be64 lemWOF;          /* C40 */
+       __be64 phbErrorStatus;  /* C80 */
+       __be64 phbFirstErrorStatus;     /* C88 */
+       __be64 phbErrorLog0;            /* CC0 */
+       __be64 phbErrorLog1;            /* CC8 */
+       __be64 mmioErrorStatus; /* D00 */
+       __be64 mmioFirstErrorStatus;    /* D08 */
+       __be64 mmioErrorLog0;           /* D40 */
+       __be64 mmioErrorLog1;           /* D48 */
+       __be64 dma0ErrorStatus; /* D80 */
+       __be64 dma0FirstErrorStatus;    /* D88 */
+       __be64 dma0ErrorLog0;           /* DC0 */
+       __be64 dma0ErrorLog1;           /* DC8 */
+       __be64 dma1ErrorStatus; /* E00 */
+       __be64 dma1FirstErrorStatus;    /* E08 */
+       __be64 dma1ErrorLog0;           /* E40 */
+       __be64 dma1ErrorLog1;           /* E48 */
+       __be64 pestA[OPAL_PHB3_NUM_PEST_REGS];
+       __be64 pestB[OPAL_PHB3_NUM_PEST_REGS];
+};
+
+struct OpalIoPhb4ErrorData {
+       struct OpalIoPhbErrorCommon common;
+
+       __be32 brdgCtl;
+
+       /* PHB4 cfg regs */
+       __be32 deviceStatus;
+       __be32 slotStatus;
+       __be32 linkStatus;
+       __be32 devCmdStatus;
+       __be32 devSecStatus;
+
+       /* cfg AER regs */
+       __be32 rootErrorStatus;
+       __be32 uncorrErrorStatus;
+       __be32 corrErrorStatus;
+       __be32 tlpHdr1;
+       __be32 tlpHdr2;
+       __be32 tlpHdr3;
+       __be32 tlpHdr4;
+       __be32 sourceId;
+
+       /* PHB4 ETU Error Regs */
+       __be64 nFir;                            /* 000 */
+       __be64 nFirMask;                        /* 003 */
+       __be64 nFirWOF;                         /* 008 */
+       __be64 phbPlssr;                        /* 120 */
+       __be64 phbCsr;                          /* 110 */
+       __be64 lemFir;                          /* C00 */
+       __be64 lemErrorMask;                    /* C18 */
+       __be64 lemWOF;                          /* C40 */
+       __be64 phbErrorStatus;                  /* C80 */
+       __be64 phbFirstErrorStatus;             /* C88 */
+       __be64 phbErrorLog0;                    /* CC0 */
+       __be64 phbErrorLog1;                    /* CC8 */
+       __be64 phbTxeErrorStatus;               /* D00 */
+       __be64 phbTxeFirstErrorStatus;          /* D08 */
+       __be64 phbTxeErrorLog0;                 /* D40 */
+       __be64 phbTxeErrorLog1;                 /* D48 */
+       __be64 phbRxeArbErrorStatus;            /* D80 */
+       __be64 phbRxeArbFirstErrorStatus;       /* D88 */
+       __be64 phbRxeArbErrorLog0;              /* DC0 */
+       __be64 phbRxeArbErrorLog1;              /* DC8 */
+       __be64 phbRxeMrgErrorStatus;            /* E00 */
+       __be64 phbRxeMrgFirstErrorStatus;       /* E08 */
+       __be64 phbRxeMrgErrorLog0;              /* E40 */
+       __be64 phbRxeMrgErrorLog1;              /* E48 */
+       __be64 phbRxeTceErrorStatus;            /* E80 */
+       __be64 phbRxeTceFirstErrorStatus;       /* E88 */
+       __be64 phbRxeTceErrorLog0;              /* EC0 */
+       __be64 phbRxeTceErrorLog1;              /* EC8 */
+
+       /* PHB4 REGB Error Regs */
+       __be64 phbPblErrorStatus;               /* 1900 */
+       __be64 phbPblFirstErrorStatus;          /* 1908 */
+       __be64 phbPblErrorLog0;                 /* 1940 */
+       __be64 phbPblErrorLog1;                 /* 1948 */
+       __be64 phbPcieDlpErrorLog1;             /* 1AA0 */
+       __be64 phbPcieDlpErrorLog2;             /* 1AA8 */
+       __be64 phbPcieDlpErrorStatus;           /* 1AB0 */
+       __be64 phbRegbErrorStatus;              /* 1C00 */
+       __be64 phbRegbFirstErrorStatus;         /* 1C08 */
+       __be64 phbRegbErrorLog0;                /* 1C40 */
+       __be64 phbRegbErrorLog1;                /* 1C48 */
+
+       __be64 pestA[OPAL_PHB4_NUM_PEST_REGS];
+       __be64 pestB[OPAL_PHB4_NUM_PEST_REGS];
+};
+
+enum {
+       OPAL_REINIT_CPUS_HILE_BE        = (1 << 0),
+       OPAL_REINIT_CPUS_HILE_LE        = (1 << 1),
+
+       /* These two define the base MMU mode of the host on P9
+        *
+        * On P9 Nimbus DD2.0 and Cumlus (and later), KVM can still
+        * create hash guests in "radix" mode with care (full core
+        * switch only).
+        */
+       OPAL_REINIT_CPUS_MMU_HASH       = (1 << 2),
+       OPAL_REINIT_CPUS_MMU_RADIX      = (1 << 3),
+
+       OPAL_REINIT_CPUS_TM_SUSPEND_DISABLED = (1 << 4),
+};
+
+typedef struct oppanel_line {
+       __be64 line;
+       __be64 line_len;
+} oppanel_line_t;
+
+enum opal_prd_msg_type {
+       OPAL_PRD_MSG_TYPE_INIT = 0,     /* HBRT --> OPAL */
+       OPAL_PRD_MSG_TYPE_FINI,         /* HBRT/kernel --> OPAL */
+       OPAL_PRD_MSG_TYPE_ATTN,         /* HBRT <-- OPAL */
+       OPAL_PRD_MSG_TYPE_ATTN_ACK,     /* HBRT --> OPAL */
+       OPAL_PRD_MSG_TYPE_OCC_ERROR,    /* HBRT <-- OPAL */
+       OPAL_PRD_MSG_TYPE_OCC_RESET,    /* HBRT <-- OPAL */
+};
+
+struct opal_prd_msg_header {
+       uint8_t         type;
+       uint8_t         pad[1];
+       __be16          size;
+};
+
+struct opal_prd_msg;
+
+#define OCC_RESET                       0
+#define OCC_LOAD                        1
+#define OCC_THROTTLE                    2
+#define OCC_MAX_THROTTLE_STATUS         5
+
+struct opal_occ_msg {
+       __be64 type;
+       __be64 chip;
+       __be64 throttle_status;
+};
+
+/*
+ * SG entries
+ *
+ * WARNING: The current implementation requires each entry
+ * to represent a block that is 4k aligned *and* each block
+ * size except the last one in the list to be as well.
+ */
+struct opal_sg_entry {
+       __be64 data;
+       __be64 length;
+};
+
+/*
+ * Candidate image SG list.
+ *
+ * length = VER | length
+ */
+struct opal_sg_list {
+       __be64 length;
+       __be64 next;
+       struct opal_sg_entry entry[];
+};
+
+/*
+ * Dump region ID range usable by the OS
+ */
+#define OPAL_DUMP_REGION_HOST_START            0x80
+#define OPAL_DUMP_REGION_LOG_BUF               0x80
+#define OPAL_DUMP_REGION_HOST_END              0xFF
+
+/* CAPI modes for PHB */
+enum {
+       OPAL_PHB_CAPI_MODE_PCIE         = 0,
+       OPAL_PHB_CAPI_MODE_CAPI         = 1,
+       OPAL_PHB_CAPI_MODE_SNOOP_OFF    = 2,
+       OPAL_PHB_CAPI_MODE_SNOOP_ON     = 3,
+       OPAL_PHB_CAPI_MODE_DMA          = 4,
+       OPAL_PHB_CAPI_MODE_DMA_TVT1     = 5,
+};
+
+/* OPAL I2C request */
+struct opal_i2c_request {
+       uint8_t type;
+#define OPAL_I2C_RAW_READ      0
+#define OPAL_I2C_RAW_WRITE     1
+#define OPAL_I2C_SM_READ       2
+#define OPAL_I2C_SM_WRITE      3
+       uint8_t flags;
+#define OPAL_I2C_ADDR_10       0x01    /* Not supported yet */
+       uint8_t subaddr_sz;             /* Max 4 */
+       uint8_t reserved;
+       __be16 addr;                    /* 7 or 10 bit address */
+       __be16 reserved2;
+       __be32 subaddr;         /* Sub-address if any */
+       __be32 size;                    /* Data size */
+       __be64 buffer_ra;               /* Buffer real address */
+};
+
+/*
+ * EPOW status sharing (OPAL and the host)
+ *
+ * The host will pass on OPAL, a buffer of length OPAL_SYSEPOW_MAX
+ * with individual elements being 16 bits wide to fetch the system
+ * wide EPOW status. Each element in the buffer will contain the
+ * EPOW status in it's bit representation for a particular EPOW sub
+ * class as defined here. So multiple detailed EPOW status bits
+ * specific for any sub class can be represented in a single buffer
+ * element as it's bit representation.
+ */
+
+/* System EPOW type */
+enum OpalSysEpow {
+       OPAL_SYSEPOW_POWER      = 0,    /* Power EPOW */
+       OPAL_SYSEPOW_TEMP       = 1,    /* Temperature EPOW */
+       OPAL_SYSEPOW_COOLING    = 2,    /* Cooling EPOW */
+       OPAL_SYSEPOW_MAX        = 3,    /* Max EPOW categories */
+};
+
+/* Power EPOW */
+enum OpalSysPower {
+       OPAL_SYSPOWER_UPS       = 0x0001, /* System on UPS power */
+       OPAL_SYSPOWER_CHNG      = 0x0002, /* System power config change */
+       OPAL_SYSPOWER_FAIL      = 0x0004, /* System impending power failure */
+       OPAL_SYSPOWER_INCL      = 0x0008, /* System incomplete power */
+};
+
+/* Temperature EPOW */
+enum OpalSysTemp {
+       OPAL_SYSTEMP_AMB        = 0x0001, /* System over ambient temperature */
+       OPAL_SYSTEMP_INT        = 0x0002, /* System over internal temperature */
+       OPAL_SYSTEMP_HMD        = 0x0004, /* System over ambient humidity */
+};
+
+/* Cooling EPOW */
+enum OpalSysCooling {
+       OPAL_SYSCOOL_INSF       = 0x0001, /* System insufficient cooling */
+};
+
+/* Argument to OPAL_CEC_REBOOT2() */
+enum {
+       OPAL_REBOOT_NORMAL              = 0,
+       OPAL_REBOOT_PLATFORM_ERROR      = 1,
+       OPAL_REBOOT_FULL_IPL            = 2,
+       OPAL_REBOOT_MPIPL               = 3,
+       OPAL_REBOOT_FAST                = 4,
+};
+
+/* Argument to OPAL_PCI_TCE_KILL */
+enum {
+       OPAL_PCI_TCE_KILL_PAGES,
+       OPAL_PCI_TCE_KILL_PE,
+       OPAL_PCI_TCE_KILL_ALL,
+};
+
+/* The xive operation mode indicates the active "API" and
+ * corresponds to the "mode" parameter of the opal_xive_reset()
+ * call
+ */
+enum {
+       OPAL_XIVE_MODE_EMU      = 0,
+       OPAL_XIVE_MODE_EXPL     = 1,
+};
+
+/* Flags for OPAL_XIVE_GET_IRQ_INFO */
+enum {
+       OPAL_XIVE_IRQ_TRIGGER_PAGE      = 0x00000001,
+       OPAL_XIVE_IRQ_STORE_EOI         = 0x00000002,
+       OPAL_XIVE_IRQ_LSI               = 0x00000004,
+       OPAL_XIVE_IRQ_SHIFT_BUG         = 0x00000008, /* P9 DD1.0 workaround */
+       OPAL_XIVE_IRQ_MASK_VIA_FW       = 0x00000010, /* P9 DD1.0 workaround */
+       OPAL_XIVE_IRQ_EOI_VIA_FW        = 0x00000020, /* P9 DD1.0 workaround */
+       OPAL_XIVE_IRQ_STORE_EOI2        = 0x00000040,
+};
+
+/* Flags for OPAL_XIVE_GET/SET_QUEUE_INFO */
+enum {
+       OPAL_XIVE_EQ_ENABLED            = 0x00000001,
+       OPAL_XIVE_EQ_ALWAYS_NOTIFY      = 0x00000002,
+       OPAL_XIVE_EQ_ESCALATE           = 0x00000004,
+};
+
+/* Flags for OPAL_XIVE_GET/SET_VP_INFO */
+enum {
+       OPAL_XIVE_VP_ENABLED            = 0x00000001,
+       OPAL_XIVE_VP_SINGLE_ESCALATION  = 0x00000002,
+};
+
+/* "Any chip" replacement for chip ID for allocation functions */
+enum {
+       OPAL_XIVE_ANY_CHIP              = 0xffffffff,
+};
+
+/* Xive sync options */
+enum {
+       /* This bits are cumulative, arg is a girq */
+       XIVE_SYNC_EAS                   = 0x00000001, /* Sync irq source */
+       XIVE_SYNC_QUEUE                 = 0x00000002, /* Sync irq target */
+};
+
+/* Dump options */
+enum {
+       XIVE_DUMP_TM_HYP        = 0,
+       XIVE_DUMP_TM_POOL       = 1,
+       XIVE_DUMP_TM_OS         = 2,
+       XIVE_DUMP_TM_USER       = 3,
+       XIVE_DUMP_VP            = 4,
+       XIVE_DUMP_EMU_STATE     = 5,
+};
+
+/* "type" argument options for OPAL_IMC_COUNTERS_* calls */
+enum {
+       OPAL_IMC_COUNTERS_NEST = 1,
+       OPAL_IMC_COUNTERS_CORE = 2,
+       OPAL_IMC_COUNTERS_TRACE = 3,
+};
+
+
+/* PCI p2p descriptor */
+#define OPAL_PCI_P2P_ENABLE            0x1
+#define OPAL_PCI_P2P_LOAD              0x2
+#define OPAL_PCI_P2P_STORE             0x4
+
+/* MPIPL update operations */
+enum opal_mpipl_ops {
+       OPAL_MPIPL_ADD_RANGE                    = 0,
+       OPAL_MPIPL_REMOVE_RANGE                 = 1,
+       OPAL_MPIPL_REMOVE_ALL                   = 2,
+       OPAL_MPIPL_FREE_PRESERVED_MEMORY        = 3,
+};
+
+/* Tag will point to various metadata area. Kernel will
+ * use tag to get metadata value.
+ */
+enum opal_mpipl_tags {
+       OPAL_MPIPL_TAG_CPU      = 0,
+       OPAL_MPIPL_TAG_OPAL     = 1,
+       OPAL_MPIPL_TAG_KERNEL   = 2,
+       OPAL_MPIPL_TAG_BOOT_MEM = 3,
+};
+
+/* Preserved memory details */
+struct opal_mpipl_region {
+       __be64  src;
+       __be64  dest;
+       __be64  size;
+};
+
+/* Structure version */
+#define OPAL_MPIPL_VERSION             0x01
+
+struct opal_mpipl_fadump {
+       uint8_t version;
+       uint8_t reserved[7];
+       __be32  crashing_pir;   /* OPAL crashing CPU PIR */
+       __be32  cpu_data_version;
+       __be32  cpu_data_size;
+       __be32  region_cnt;
+       struct  opal_mpipl_region region[];
+} __packed;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __OPAL_API_H */
--
generated by git-patchbot for /home/xen/git/xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.