[xen master] xen/arm64: head: only use the macro load_paddr() in the MMU code

[patchbot@xxxxxxx]

commit 046f13a2b3b4f66a10cc395d45bcf8dc6793f537
Author:     Julien Grall <julien@xxxxxxx>
AuthorDate: Tue Oct 17 13:52:19 2023 +0100
Commit:     Julien Grall <jgrall@xxxxxxxxxx>
CommitDate: Thu Nov 16 14:03:19 2023 +0000

    xen/arm64: head: only use the macro load_paddr() in the MMU code
    
    The macro load_paddr() requires to know the offset between the
    physical location of Xen and the virtual location.
    
    When using the MPU, x20 will always be 0. Rather than wasting
    a register for a compile-time constant value, it would be best if
    we can avoid using load_paddr() altogether in the common head.S code.
    
    The current use of load_paddr() are equivalent to adr_l() because
    the MMU is off.
    
    All the use of load_paddr() in arm64/head.S are now replaced with
    adr_l(). With that, load_paddr() can now be moved in arm64/mmu/head.S.
    
    For now, x20 is still unconditionally set. But this could change
    in the future if needed.
    
    Signed-off-by: Julien Grall <julien@xxxxxxx>
    Reviewed-by: Michal Orzel <michal.orzel@xxxxxxx>
---
 xen/arch/arm/arm64/head.S               | 4 ++--
 xen/arch/arm/arm64/mmu/head.S           | 6 ++++++
 xen/arch/arm/include/asm/arm64/macros.h | 6 ------
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 4ad85dcf58..8dbd3300d8 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -259,7 +259,7 @@ real_start_efi:
 
         /* Using the DTB in the .dtb section? */
 .ifnes CONFIG_DTB_FILE,""
-        load_paddr x21, _sdtb
+        adr_l x21, _sdtb
 .endif
 
         /* Initialize the UART if earlyprintk has been enabled. */
@@ -301,7 +301,7 @@ GLOBAL(init_secondary)
         bic   x24, x0, x13           /* Mask out flags to get CPU ID */
 
         /* Wait here until __cpu_up is ready to handle the CPU */
-        load_paddr x0, smp_up_cpu
+        adr_l x0, smp_up_cpu
         dsb   sy
 2:      ldr   x1, [x0]
         cmp   x1, x24
diff --git a/xen/arch/arm/arm64/mmu/head.S b/xen/arch/arm/arm64/mmu/head.S
index 88075ef083..412b28e649 100644
--- a/xen/arch/arm/arm64/mmu/head.S
+++ b/xen/arch/arm/arm64/mmu/head.S
@@ -19,6 +19,12 @@
 #define XEN_FIRST_SLOT      first_table_offset(XEN_VIRT_START)
 #define XEN_SECOND_SLOT     second_table_offset(XEN_VIRT_START)
 
+/* Load the physical address of a symbol into xb */
+.macro load_paddr xb, sym
+        ldr \xb, =\sym
+        add \xb, \xb, x20
+.endm
+
 /*
  * Flush local TLBs
  *
diff --git a/xen/arch/arm/include/asm/arm64/macros.h 
b/xen/arch/arm/include/asm/arm64/macros.h
index 99c401fcaf..fb9a060249 100644
--- a/xen/arch/arm/include/asm/arm64/macros.h
+++ b/xen/arch/arm/include/asm/arm64/macros.h
@@ -62,12 +62,6 @@
         add  \dst, \dst, :lo12:\sym
 .endm
 
-/* Load the physical address of a symbol into xb */
-.macro load_paddr xb, sym
-        ldr \xb, =\sym
-        add \xb, \xb, x20
-.endm
-
 /*
  * Register aliases.
  */
--
generated by git-patchbot for /home/xen/git/xen.git#master