[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen master] xen/arm: Fold mmu_init_secondary_cpu() to head.S
commit ea59db96a41a80d923678a782842ffe269ab7ff5 Author: Henry Wang <Henry.Wang@xxxxxxx> AuthorDate: Thu Nov 16 22:50:27 2023 +0800 Commit: Julien Grall <jgrall@xxxxxxxxxx> CommitDate: Mon Nov 20 19:07:45 2023 +0000 xen/arm: Fold mmu_init_secondary_cpu() to head.S Currently mmu_init_secondary_cpu() only enforces the page table should not contain mapping that are both Writable and eXecutables after boot. To ease the arch/arm/mm.c split work, fold this function to head.S. For arm32, the WXN bit cannot be set early because at the point when the MMU is enabled, the page-tables may still contain mapping which are writable and executable. Therefore, introduce an assembly macro pt_enforce_wxn. The macro is called before secondary CPUs jumping into the C world. For arm64, set the SCTLR_Axx_ELx_WXN flag right when the MMU is enabled. This would avoid the extra TLB flush and SCTLR dance. Signed-off-by: Henry Wang <Henry.Wang@xxxxxxx> Co-authored-by: Julien Grall <jgrall@xxxxxxxxxx> Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx> Reviewed-by: Julien Grall <jgrall@xxxxxxxxxx> Signed-off-by: Julien Grall <jgrall@xxxxxxxxxx> --- xen/arch/arm/arm32/head.S | 20 ++++++++++++++++++++ xen/arch/arm/arm64/mmu/head.S | 19 ++++++++++++------- xen/arch/arm/include/asm/mm.h | 2 -- xen/arch/arm/mm.c | 6 ------ xen/arch/arm/smpboot.c | 2 -- 5 files changed, 32 insertions(+), 17 deletions(-) diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S index bbbdf7daf8..2c235fb34c 100644 --- a/xen/arch/arm/arm32/head.S +++ b/xen/arch/arm/arm32/head.S @@ -83,6 +83,25 @@ isb .endm +/* + * Enforce Xen page-tables do not contain mapping that are both + * Writable and eXecutables. + * + * This should be called on each secondary CPU. + */ +.macro pt_enforce_wxn tmp + mrc CP32(\tmp, HSCTLR) + orr \tmp, \tmp, #SCTLR_Axx_ELx_WXN + dsb + mcr CP32(\tmp, HSCTLR) + /* + * The TLBs may cache SCTLR_EL2.WXN. So ensure it is synchronized + * before flushing the TLBs. + */ + isb + flush_xen_tlb_local \tmp +.endm + /* * Common register usage in this file: * r0 - @@ -249,6 +268,7 @@ secondary_switched: dsb isb flush_xen_tlb_local r0 + pt_enforce_wxn r0 #ifdef CONFIG_EARLY_PRINTK /* Use a virtual address to access the UART. */ diff --git a/xen/arch/arm/arm64/mmu/head.S b/xen/arch/arm/arm64/mmu/head.S index 412b28e649..10774f30e4 100644 --- a/xen/arch/arm/arm64/mmu/head.S +++ b/xen/arch/arm/arm64/mmu/head.S @@ -269,11 +269,13 @@ ENDPROC(create_page_tables) * * Inputs: * x0 : Physical address of the page tables. + * x1 : Extra flags of the SCTLR. * - * Clobbers x0 - x4 + * Clobbers x0 - x5 */ enable_mmu: mov x4, x0 + mov x5, x1 PRINT("- Turning on paging -\r\n") /* @@ -289,6 +291,7 @@ enable_mmu: mrs x0, SCTLR_EL2 orr x0, x0, #SCTLR_Axx_ELx_M /* Enable MMU */ orr x0, x0, #SCTLR_Axx_ELx_C /* Enable D-cache */ + orr x0, x0, x5 /* Enable extra flags */ dsb sy /* Flush PTE writes and finish reads */ msr SCTLR_EL2, x0 /* now paging is enabled */ isb /* Now, flush the icache */ @@ -303,16 +306,17 @@ ENDPROC(enable_mmu) * Inputs: * lr : Virtual address to return to. * - * Clobbers x0 - x5 + * Clobbers x0 - x6 */ ENTRY(enable_secondary_cpu_mm) - mov x5, lr + mov x6, lr load_paddr x0, init_ttbr ldr x0, [x0] + mov x1, #SCTLR_Axx_ELx_WXN /* Enable WxN from the start */ bl enable_mmu - mov lr, x5 + mov lr, x6 /* Return to the virtual address requested by the caller. */ ret @@ -326,14 +330,15 @@ ENDPROC(enable_secondary_cpu_mm) * Inputs: * lr : Virtual address to return to. * - * Clobbers x0 - x5 + * Clobbers x0 - x6 */ ENTRY(enable_boot_cpu_mm) - mov x5, lr + mov x6, lr bl create_page_tables load_paddr x0, boot_pgtable + mov x1, #0 /* No extra SCTLR flags */ bl enable_mmu /* @@ -343,7 +348,7 @@ ENTRY(enable_boot_cpu_mm) ldr x0, =1f br x0 1: - mov lr, x5 + mov lr, x6 /* * The 1:1 map may clash with other parts of the Xen virtual memory * layout. As it is not used anymore, remove it completely to diff --git a/xen/arch/arm/include/asm/mm.h b/xen/arch/arm/include/asm/mm.h index d25e59f828..163d22ecd3 100644 --- a/xen/arch/arm/include/asm/mm.h +++ b/xen/arch/arm/include/asm/mm.h @@ -214,8 +214,6 @@ extern void remove_early_mappings(void); /* Allocate and initialise pagetables for a secondary CPU. Sets init_ttbr to the * new page table */ extern int init_secondary_pagetables(int cpu); -/* Switch secondary CPUS to its own pagetables and finalise MMU setup */ -extern void mmu_init_secondary_cpu(void); /* * For Arm32, set up the direct-mapped xenheap: up to 1GB of contiguous, * always-mapped memory. Base must be 32MB aligned and size a multiple of 32MB. diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c index b7eb3a6e08..923a90925c 100644 --- a/xen/arch/arm/mm.c +++ b/xen/arch/arm/mm.c @@ -326,12 +326,6 @@ void __init setup_pagetables(unsigned long boot_phys_offset) #endif } -/* MMU setup for secondary CPUS (which already have paging enabled) */ -void mmu_init_secondary_cpu(void) -{ - xen_pt_enforce_wnx(); -} - #ifdef CONFIG_ARM_32 /* * Set up the direct-mapped xenheap: diff --git a/xen/arch/arm/smpboot.c b/xen/arch/arm/smpboot.c index 5533aed455..1cf6e50a85 100644 --- a/xen/arch/arm/smpboot.c +++ b/xen/arch/arm/smpboot.c @@ -361,8 +361,6 @@ void start_secondary(void) */ update_system_features(¤t_cpu_data); - mmu_init_secondary_cpu(); - gic_init_secondary_cpu(); set_current(idle_vcpu[cpuid]); -- generated by git-patchbot for /home/xen/git/xen.git#master
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |