[xen master] xen/ppc: Ensure ELF sections' physical load addresses start at 0x0

[patchbot@xxxxxxx]

commit 97b90f9bf2e5c93e0f61c927fa2bc8a56a213faa
Author:     Shawn Anastasio <sanastasio@xxxxxxxxxxxxxxxxxxxxx>
AuthorDate: Thu Mar 21 09:49:20 2024 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Thu Mar 21 09:49:20 2024 +0100

    xen/ppc: Ensure ELF sections' physical load addresses start at 0x0
    
    Some boot mechanisms, including the new linux file_load kexec systemcall
    used by system firmware v2.10 on RaptorCS systems will try to honor the
    physical address field of the ELF LOAD section header, which will fail
    when the address is based off of XEN_VIRT_START (0xc000000000000000).
    
    To ensure that the physical address of the LOAD section header starts at
    0x0, move x86's DECL_SECTION macro to xen.lds.h and use it to declare
    all sections.
    
    Signed-off-by: Shawn Anastasio <sanastasio@xxxxxxxxxxxxxxxxxxxxx>
    Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
 xen/arch/ppc/xen.lds.S    | 27 +++++++++++++++------------
 xen/arch/x86/xen.lds.S    |  6 +-----
 xen/include/xen/xen.lds.h | 10 ++++++++++
 3 files changed, 26 insertions(+), 17 deletions(-)

diff --git a/xen/arch/ppc/xen.lds.S b/xen/arch/ppc/xen.lds.S
index 05b6db2728..8840a00446 100644
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -4,6 +4,9 @@
 OUTPUT_ARCH(powerpc:common64)
 ENTRY(start)
 
+/* Used by the DECL_SECTION() macro to calculate physical load addresses */
+#define __XEN_VIRT_START XEN_VIRT_START
+
 PHDRS
 {
     text PT_LOAD ;
@@ -17,7 +20,7 @@ SECTIONS
     . = XEN_VIRT_START;
     _start = .;
 
-    .text : {
+    DECL_SECTION(.text) {
         _stext = .;            /* Text section */
         *(.text.header)
 
@@ -40,7 +43,7 @@ SECTIONS
     } :text
 
     . = ALIGN(PAGE_SIZE);
-    .rodata : {
+    DECL_SECTION(.rodata) {
         _srodata = .;          /* Read-only data */
         /* Bug frames table */
         __start_bug_frames = .;
@@ -64,7 +67,7 @@ SECTIONS
 
     #if defined(BUILD_ID)
     . = ALIGN(4);
-    .note.gnu.build-id : {
+    DECL_SECTION(.note.gnu.build-id) {
         __note_gnu_build_id_start = .;
         *(.note.gnu.build-id)
         __note_gnu_build_id_end = .;
@@ -73,19 +76,19 @@ SECTIONS
     _erodata = .;                /* End of read-only data */
 
     . = ALIGN(PAGE_SIZE);
-    .data.ro_after_init : {
+    DECL_SECTION(.data.ro_after_init) {
         __ro_after_init_start = .;
         *(.data.ro_after_init)
         . = ALIGN(PAGE_SIZE);
         __ro_after_init_end = .;
     } :text
 
-    .data.read_mostly : {
+    DECL_SECTION(.data.read_mostly) {
         *(.data.read_mostly)
     } :text
 
     . = ALIGN(PAGE_SIZE);
-    .data : {                    /* Data */
+    DECL_SECTION(.data) {                    /* Data */
         *(.data.page_aligned)
         . = ALIGN(8);
         __start_schedulers_array = .;
@@ -100,7 +103,7 @@ SECTIONS
 
     . = ALIGN(PAGE_SIZE);             /* Init code and data */
     __init_begin = .;
-    .init.text : {
+    DECL_SECTION(.init.text) {
         _sinittext = .;
         *(.init.text)
         _einittext = .;
@@ -108,7 +111,7 @@ SECTIONS
     } :text
 
     . = ALIGN(PAGE_SIZE);
-    .init.data : {
+    DECL_SECTION(init.data) {
         *(.init.rodata)
         *(.init.rodata.*)
 
@@ -137,18 +140,18 @@ SECTIONS
         __ctors_end = .;
     } :text
 
-    .got : {
+    DECL_SECTION(.got) {
         *(.got .toc)
     } :text
 
-    .got.plt : {
+    DECL_SECTION(.got.plt) {
         *(.got.plt)
     } :text
 
     . = ALIGN(POINTER_ALIGN);
     __init_end = .;
 
-    .bss : {                     /* BSS */
+    DECL_SECTION(.bss) {                     /* BSS */
         __bss_start = .;
         *(.bss.stack_aligned)
         *(.bss.page_aligned)
@@ -168,7 +171,7 @@ SECTIONS
     _end = . ;
 
     /* Section for the device tree blob (if any). */
-    .dtb : { *(.dtb) } :text
+    DECL_SECTION(.dtb) { *(.dtb) } :text
 
     DWARF2_DEBUG_SECTIONS
 
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index 8930e14fc4..1ef6645128 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -12,6 +12,7 @@
 
 #define FORMAT "pei-x86-64"
 #undef __XEN_VIRT_START
+#undef DECL_SECTION
 #define __XEN_VIRT_START __image_base__
 #define DECL_SECTION(x) x :
 
@@ -20,11 +21,6 @@ ENTRY(efi_start)
 #else /* !EFI */
 
 #define FORMAT "elf64-x86-64"
-#ifdef CONFIG_LD_IS_GNU
-# define DECL_SECTION(x) x : AT(ADDR(#x) - __XEN_VIRT_START)
-#else
-# define DECL_SECTION(x) x : AT(ADDR(x) - __XEN_VIRT_START)
-#endif
 
 ENTRY(start_pa)
 
diff --git a/xen/include/xen/xen.lds.h b/xen/include/xen/xen.lds.h
index 06b7110837..be90f5ca0f 100644
--- a/xen/include/xen/xen.lds.h
+++ b/xen/include/xen/xen.lds.h
@@ -5,6 +5,16 @@
  * Common macros to be used in architecture specific linker scripts.
  */
 
+/*
+ * Declare a section whose load address is based at PA 0 rather than
+ * Xen's virtual base address.
+ */
+#ifdef CONFIG_LD_IS_GNU
+# define DECL_SECTION(x) x : AT(ADDR(#x) - __XEN_VIRT_START)
+#else
+# define DECL_SECTION(x) x : AT(ADDR(x) - __XEN_VIRT_START)
+#endif
+
 /*
  * To avoid any confusion, please note that the EFI macro does not correspond
  * to EFI support and is used when linking a native EFI (i.e. PE/COFF) binary,
--
generated by git-patchbot for /home/xen/git/xen.git#master