[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen master] xen/Kconfig: Drop the final remnants of ---help---



commit f95cd010cbf0914154a0c2775c979d9158b1a3cb
Author:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
AuthorDate: Thu May 2 18:35:09 2024 +0100
Commit:     Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
CommitDate: Fri May 3 16:27:39 2024 +0100

    xen/Kconfig: Drop the final remnants of ---help---
    
    We deprecated the use of ---help--- a while ago, but a lot of new content
    copy&pastes bad examples.  Convert the remaining instances, and update
    Kconfig's parser to no longer recongise it.
    
    This now causes builds to fail with:
    
      Kconfig.debug:8: syntax error
      Kconfig.debug:7: unknown statement "---help---"
    
    which short circuits one common piece of churn in new content.
    
    No functional change.
    
    Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
    Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
    Release-acked-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
---
 xen/Kconfig                     |  2 +-
 xen/Kconfig.debug               | 28 ++++++++++++------------
 xen/arch/arm/Kconfig            |  8 +++----
 xen/arch/arm/platforms/Kconfig  | 12 +++++------
 xen/arch/x86/Kconfig            | 32 +++++++++++++--------------
 xen/common/Kconfig              | 48 ++++++++++++++++++++---------------------
 xen/common/sched/Kconfig        | 10 ++++-----
 xen/drivers/passthrough/Kconfig |  8 +++----
 xen/drivers/video/Kconfig       |  2 +-
 xen/tools/kconfig/lexer.l       |  2 +-
 10 files changed, 76 insertions(+), 76 deletions(-)

diff --git a/xen/Kconfig b/xen/Kconfig
index 1e1b041fd5..e459cdac0c 100644
--- a/xen/Kconfig
+++ b/xen/Kconfig
@@ -84,7 +84,7 @@ config UNSUPPORTED
 config LTO
        bool "Link Time Optimisation"
        depends on BROKEN
-       ---help---
+       help
          Enable Link Time Optimisation.
 
          If unsure, say N.
diff --git a/xen/Kconfig.debug b/xen/Kconfig.debug
index fa81853e93..61b24ac552 100644
--- a/xen/Kconfig.debug
+++ b/xen/Kconfig.debug
@@ -4,7 +4,7 @@ menu "Debugging Options"
 config DEBUG
        bool "Developer Checks"
        default y
-       ---help---
+       help
          If you say Y here this will enable developer checks such as asserts
          and extra printks. This option is intended for development purposes
          only, and not for production use.
@@ -17,14 +17,14 @@ config GDBSX
        bool "Guest debugging with gdbsx"
        depends on X86
        default y
-       ---help---
+       help
          If you want to enable support for debugging guests from dom0 via
          gdbsx then say Y.
 
 config FRAME_POINTER
        bool "Compile Xen with frame pointers"
        default DEBUG
-       ---help---
+       help
          If you say Y here the resulting Xen will be slightly larger and
          maybe slower, but it gives very useful debugging information
          in case of any Xen bugs.
@@ -33,7 +33,7 @@ config COVERAGE
        bool "Code coverage support"
        depends on !LIVEPATCH
        select SUPPRESS_DUPLICATE_SYMBOL_WARNINGS if !ENFORCE_UNIQUE_SYMBOLS
-       ---help---
+       help
          Enable code coverage support.
 
          If unsure, say N here.
@@ -41,7 +41,7 @@ config COVERAGE
 config DEBUG_LOCK_PROFILE
        bool "Lock Profiling"
        select DEBUG_LOCKS
-       ---help---
+       help
          Lock profiling allows you to see how often locks are taken and 
blocked.
          You can use serial console to print (and reset) using 'l' and 'L'
          respectively, or the 'xenlockprof' tool.
@@ -49,13 +49,13 @@ config DEBUG_LOCK_PROFILE
 config DEBUG_LOCKS
        bool "Lock debugging"
        default DEBUG
-       ---help---
+       help
          Enable debugging features of lock handling.  Some additional
          checks will be performed when acquiring and releasing locks.
 
 config PERF_COUNTERS
        bool "Performance Counters"
-       ---help---
+       help
          Enables software performance counters that allows you to analyze
          bottlenecks in the system.  To access this data you can use serial
          console to print (and reset) using 'p' and 'P' respectively, or
@@ -64,21 +64,21 @@ config PERF_COUNTERS
 config PERF_ARRAYS
        bool "Performance Counter Array Histograms"
        depends on PERF_COUNTERS
-       ---help---
+       help
          Enables software performance counter array histograms.
 
 
 config VERBOSE_DEBUG
        bool "Verbose debug messages"
        default DEBUG
-       ---help---
+       help
          Guest output from HYPERVISOR_console_io and hypervisor parsing
          ELF images (dom0) will be logged in the Xen ring buffer.
 
 config DEVICE_TREE_DEBUG
        bool "Device tree debug messages"
        depends on HAS_DEVICE_TREE
-       ---help---
+       help
          Device tree parsing and DOM0 device tree building messages are
          logged in the Xen ring buffer.
          If unsure, say N here.
@@ -86,14 +86,14 @@ config DEVICE_TREE_DEBUG
 config SCRUB_DEBUG
        bool "Page scrubbing test"
        default DEBUG
-       ---help---
+       help
          Verify that pages that need to be scrubbed before being allocated to
          a guest are indeed scrubbed.
 
 config UBSAN
        bool "Undefined behaviour sanitizer"
        depends on HAS_UBSAN
-       ---help---
+       help
          Enable undefined behaviour sanitizer. It uses compiler to insert code
          snippets so that undefined behaviours in C are detected during 
runtime.
          This requires a UBSAN capable compiler and it is a debug only feature.
@@ -109,7 +109,7 @@ config UBSAN_FATAL
 
 config DEBUG_TRACE
        bool "Debug trace support"
-       ---help---
+       help
          Debug trace enables to record debug trace messages which are printed
          either directly to the console or are printed to console in case of
          a system crash.
@@ -117,7 +117,7 @@ config DEBUG_TRACE
 config XMEM_POOL_POISON
        bool "Poison free xenpool blocks"
        default DEBUG
-       ---help---
+       help
          Poison free blocks with 0xAA bytes and verify them when a block is
          allocated in order to spot use-after-free issues.
 
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index f8139a773a..21d03d9f44 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -67,7 +67,7 @@ source "arch/Kconfig"
 config ACPI
        bool "ACPI (Advanced Configuration and Power Interface) Support 
(UNSUPPORTED)" if UNSUPPORTED
        depends on ARM_64 && ARM_EFI
-       ---help---
+       help
 
          Advanced Configuration and Power Interface (ACPI) support for Xen is
          an alternative to device tree on ARM64. This requires UEFI.
@@ -102,7 +102,7 @@ config GICV3
        depends on !NEW_VGIC
        default n if ARM_32
        default y if ARM_64
-       ---help---
+       help
 
          Driver for the ARM Generic Interrupt Controller v3.
          If unsure, use the default setting.
@@ -132,7 +132,7 @@ config HVM
 config NEW_VGIC
        bool "Use new VGIC implementation"
        select GICV2
-       ---help---
+       help
 
        This is an alternative implementation of the ARM GIC interrupt
        controller emulation, based on the Linux/KVM VGIC. It has a better
@@ -147,7 +147,7 @@ config NEW_VGIC
 config SBSA_VUART_CONSOLE
        bool "Emulated SBSA UART console support"
        default y
-       ---help---
+       help
          Allows a guest to use SBSA Generic UART as a console. The
          SBSA Generic UART implements a subset of ARM PL011 UART.
 
diff --git a/xen/arch/arm/platforms/Kconfig b/xen/arch/arm/platforms/Kconfig
index c93a6b2756..76f7e76b1b 100644
--- a/xen/arch/arm/platforms/Kconfig
+++ b/xen/arch/arm/platforms/Kconfig
@@ -1,14 +1,14 @@
 choice
        prompt "Platform Support"
        default ALL_PLAT
-       ---help---
+       help
        Choose which hardware platform to enable in Xen.
 
        If unsure, choose ALL_PLAT.
 
 config ALL_PLAT
        bool "All Platforms"
-       ---help---
+       help
        Enable support for all available hardware platforms. It doesn't
        automatically select any of the related drivers.
 
@@ -17,7 +17,7 @@ config QEMU
        depends on ARM_64
        select GICV3
        select HAS_PL011
-       ---help---
+       help
        Enable all the required drivers for QEMU aarch64 virt emulated
        machine.
 
@@ -26,7 +26,7 @@ config RCAR3
        depends on ARM_64
        select HAS_SCIF
        select IPMMU_VMSA
-       ---help---
+       help
        Enable all the required drivers for Renesas RCar3
 
 config MPSOC
@@ -34,12 +34,12 @@ config MPSOC
        depends on ARM_64
        select HAS_CADENCE_UART
        select ARM_SMMU
-       ---help---
+       help
        Enable all the required drivers for Xilinx Ultrascale+ MPSoC
 
 config NO_PLAT
        bool "No Platforms"
-       ---help---
+       help
        Do not enable specific support for any platform.
 
 endchoice
diff --git a/xen/arch/x86/Kconfig b/xen/arch/x86/Kconfig
index 2b6248774d..7e03e4bc55 100644
--- a/xen/arch/x86/Kconfig
+++ b/xen/arch/x86/Kconfig
@@ -58,7 +58,7 @@ source "arch/Kconfig"
 config PV
        def_bool y
        prompt "PV support"
-       ---help---
+       help
          Interfaces to support PV domains. These require guest kernel support
          to run as a PV guest, but don't require any specific hardware support.
 
@@ -71,7 +71,7 @@ config PV32
        depends on PV
        default PV_SHIM
        select COMPAT
-       ---help---
+       help
          The 32bit PV ABI uses Ring1, an area of the x86 architecture which
          was deprecated and mostly removed in the AMD64 spec.  As a result,
          it occasionally conflicts with newer x86 hardware features, causing
@@ -90,7 +90,7 @@ config PV_LINEAR_PT
        bool "Support for PV linear pagetables"
        depends on PV
        default y
-       ---help---
+       help
          Linear pagetables (also called "recursive pagetables") refers
          to the practice of a guest operating system having pagetable
          entries pointing to other pagetables of the same level (i.e.,
@@ -113,7 +113,7 @@ config HVM
        select COMPAT
        select IOREQ_SERVER
        select MEM_ACCESS_ALWAYS_ON
-       ---help---
+       help
          Interfaces to support HVM domains.  HVM domains require hardware
          virtualisation extensions (e.g. Intel VT-x, AMD SVM), but can boot
          guests which have no specific Xen knowledge.
@@ -126,7 +126,7 @@ config XEN_SHSTK
        bool "Supervisor Shadow Stacks"
        depends on HAS_AS_CET_SS
        default y
-       ---help---
+       help
          Control-flow Enforcement Technology (CET) is a set of features in
          hardware designed to combat Return-oriented Programming (ROP, also
          call/jump COP/JOP) attacks.  Shadow Stacks are one CET feature
@@ -152,7 +152,7 @@ config SHADOW_PAGING
        bool "Shadow Paging"
        default !PV_SHIM_EXCLUSIVE
        depends on PV || HVM
-       ---help---
+       help
 
           Shadow paging is a software alternative to hardware paging support
           (Intel EPT, AMD NPT).
@@ -171,7 +171,7 @@ config SHADOW_PAGING
 config BIGMEM
        bool "big memory support"
        default n
-       ---help---
+       help
          Allows Xen to support up to 123Tb of memory.
 
          This requires enlarging struct page_info as well as shrinking
@@ -183,7 +183,7 @@ config HVM_FEP
        bool "HVM Forced Emulation Prefix support (UNSUPPORTED)" if UNSUPPORTED
        default DEBUG
        depends on HVM
-       ---help---
+       help
 
          Compiles in a feature that allows HVM guest to arbitrarily
          exercise the instruction emulator.
@@ -203,7 +203,7 @@ config TBOOT
        depends on UNSUPPORTED
        default !PV_SHIM_EXCLUSIVE
        select CRYPTO
-       ---help---
+       help
          Allows support for Trusted Boot using the Intel(R) Trusted Execution
          Technology (TXT)
 
@@ -213,14 +213,14 @@ choice
        prompt "Alignment of Xen image"
        default XEN_ALIGN_2M if PV_SHIM_EXCLUSIVE
        default XEN_ALIGN_DEFAULT
-       ---help---
+       help
          Specify alignment for Xen image.
 
          If unsure, choose "default".
 
 config XEN_ALIGN_DEFAULT
        bool "Default alignment"
-       ---help---
+       help
          Pick alignment according to build variants.
 
          For EFI build the default alignment is 2M. For ELF build
@@ -281,7 +281,7 @@ config GUEST
 config XEN_GUEST
        bool "Xen Guest"
        select GUEST
-       ---help---
+       help
          Support for Xen detecting when it is running under Xen.
 
          If unsure, say N.
@@ -290,7 +290,7 @@ config PVH_GUEST
        def_bool y
        prompt "PVH Guest"
        depends on XEN_GUEST
-       ---help---
+       help
          Support booting using the PVH ABI.
 
          If unsure, say Y.
@@ -299,7 +299,7 @@ config PV_SHIM
        def_bool y
        prompt "PV Shim"
        depends on PV && XEN_GUEST
-       ---help---
+       help
          Build Xen with a mode which acts as a shim to allow PV guest to run
          in an HVM/PVH container. This mode can only be enabled with command
          line option.
@@ -309,7 +309,7 @@ config PV_SHIM
 config PV_SHIM_EXCLUSIVE
        bool "PV Shim Exclusive"
        depends on PV_SHIM
-       ---help---
+       help
          Build Xen in a way which unconditionally assumes PV_SHIM mode.  This
          option is only intended for use when building a dedicated PV Shim
          firmware, and will not function correctly in other scenarios.
@@ -321,7 +321,7 @@ if !PV_SHIM_EXCLUSIVE
 config HYPERV_GUEST
        bool "Hyper-V Guest"
        select GUEST
-       ---help---
+       help
          Support for Xen detecting when it is running under Hyper-V.
 
          If unsure, say N.
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index cff3166ff9..565ceda741 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -15,7 +15,7 @@ config CORE_PARKING
 config GRANT_TABLE
        bool "Grant table support" if EXPERT
        default y
-       ---help---
+       help
          Grant table provides a generic mechanism to memory sharing
          between domains. This shared memory interface underpins the
          split device drivers for block and network IO in a classic
@@ -90,7 +90,7 @@ config MEM_ACCESS
        def_bool MEM_ACCESS_ALWAYS_ON
        prompt "Memory Access and VM events" if !MEM_ACCESS_ALWAYS_ON
        depends on HVM
-       ---help---
+       help
 
          Framework to configure memory access types for guests and receive
          related events in userspace.
@@ -133,7 +133,7 @@ config INDIRECT_THUNK
 config SPECULATIVE_HARDEN_ARRAY
        bool "Speculative Array Hardening"
        default y
-       ---help---
+       help
          Contemporary processors may use speculative execution as a
          performance optimisation, but this can potentially be abused by an
          attacker to leak data via speculative sidechannels.
@@ -154,7 +154,7 @@ config SPECULATIVE_HARDEN_BRANCH
        bool "Speculative Branch Hardening"
        default y
        depends on X86
-        ---help---
+        help
          Contemporary processors may use speculative execution as a
          performance optimisation, but this can potentially be abused by an
          attacker to leak data via speculative sidechannels.
@@ -228,7 +228,7 @@ config DIT_DEFAULT
 config HYPFS
        bool "Hypervisor file system support"
        default y
-       ---help---
+       help
          Support Xen hypervisor file system. This file system is used to
          present various hypervisor internal data to dom0 and in some
          cases to allow modifying settings. Disabling the support will
@@ -241,7 +241,7 @@ config HYPFS_CONFIG
        bool "Provide hypervisor .config via hypfs entry"
        default y
        depends on HYPFS
-       ---help---
+       help
          When enabled the contents of the .config file used to build the
          hypervisor are provided via the hypfs entry /buildinfo/config.
 
@@ -252,7 +252,7 @@ config IOREQ_SERVER
        bool "IOREQ support (EXPERT)" if EXPERT && !X86
        default X86
        depends on HVM
-       ---help---
+       help
          Enables generic mechanism for providing emulated devices to the 
guests.
 
          If unsure, say N.
@@ -261,7 +261,7 @@ config KEXEC
        bool "kexec support"
        default y
        depends on HAS_KEXEC
-       ---help---
+       help
          Allows a running Xen hypervisor to be replaced with another OS
          without rebooting. This is primarily used to execute a crash
          environment to collect information on a Xen hypervisor or dom0 crash.
@@ -270,7 +270,7 @@ config KEXEC
 
 config EFI_SET_VIRTUAL_ADDRESS_MAP
     bool "EFI: call SetVirtualAddressMap()" if EXPERT
-    ---help---
+    help
       Call EFI SetVirtualAddressMap() runtime service to setup memory map for
       further runtime services. According to UEFI spec, it isn't strictly
       necessary, but many UEFI implementations misbehave when this call is
@@ -292,7 +292,7 @@ config XENOPROF
 config XSM
        bool "Xen Security Modules support"
        default ARM
-       ---help---
+       help
          Enables the security framework known as Xen Security Modules which
          allows administrators fine-grained control over a Xen domain and
          its capabilities by defining permissible interactions between domains,
@@ -305,7 +305,7 @@ config XSM_FLASK
        def_bool y
        prompt "FLux Advanced Security Kernel support"
        depends on XSM
-       ---help---
+       help
          Enables FLASK (FLux Advanced Security Kernel) as the access control
          mechanism used by the XSM framework.  This provides a mandatory access
          control framework by which security enforcement, isolation, and
@@ -318,7 +318,7 @@ config XSM_FLASK_AVC_STATS
        def_bool y
        prompt "Maintain statistics on the FLASK access vector cache" if EXPERT
        depends on XSM_FLASK
-       ---help---
+       help
          Maintain counters on the access vector cache that can be viewed using
          the FLASK_AVC_CACHESTATS sub-op of the xsm_op hypercall.  Disabling
          this will save a tiny amount of memory and time to update the stats.
@@ -329,7 +329,7 @@ config XSM_FLASK_POLICY
        bool "Compile Xen with a built-in FLASK security policy"
        default y if "$(XEN_HAS_CHECKPOLICY)" = "y"
        depends on XSM_FLASK
-       ---help---
+       help
          This includes a default XSM policy in the hypervisor so that the
          bootloader does not need to load a policy to get sane behavior from an
          XSM-enabled hypervisor.  If this is disabled, a policy must be
@@ -345,7 +345,7 @@ config XSM_SILO
        def_bool y
        prompt "SILO support"
        depends on XSM
-       ---help---
+       help
          Enables SILO as the access control mechanism used by the XSM 
framework.
          This is not the default module, add boot parameter xsm=silo to choose
          it. This will deny any unmediated communication channels (grant tables
@@ -372,7 +372,7 @@ config LATE_HWDOM
        bool "Dedicated hardware domain"
        default n
        depends on XSM && X86
-       ---help---
+       help
          Allows the creation of a dedicated hardware domain distinct from
          domain 0 that manages devices without needing access to other
          privileged functionality such as the ability to manage domains.
@@ -390,7 +390,7 @@ config LATE_HWDOM
 
 config ARGO
        bool "Argo: hypervisor-mediated interdomain communication 
(UNSUPPORTED)" if UNSUPPORTED
-       ---help---
+       help
          Enables a hypercall for domains to ask the hypervisor to perform
          data transfer of messages between domains.
 
@@ -417,7 +417,7 @@ config LIVEPATCH
        default X86
        depends on "$(XEN_HAS_BUILD_ID)" = "y"
        select CC_SPLIT_SECTIONS
-       ---help---
+       help
          Allows a running Xen hypervisor to be dynamically patched using
          binary patches without rebooting. This is primarily used to binarily
          patch in the field an hypervisor with XSA fixes.
@@ -428,7 +428,7 @@ config FAST_SYMBOL_LOOKUP
        bool "Fast symbol lookup (bigger binary)"
        default y
        depends on LIVEPATCH
-       ---help---
+       help
          When searching for symbol addresses we can use the built-in system
          that is optimized for searching symbols using addresses as the key.
          However using it for the inverse (find address using the symbol name)
@@ -440,7 +440,7 @@ config FAST_SYMBOL_LOOKUP
 config ENFORCE_UNIQUE_SYMBOLS
        bool "Enforce unique symbols"
        default LIVEPATCH
-       ---help---
+       help
          Multiple symbols with the same name aren't generally a problem
          unless livepatching is to be used.
 
@@ -454,7 +454,7 @@ config ENFORCE_UNIQUE_SYMBOLS
 config SUPPRESS_DUPLICATE_SYMBOL_WARNINGS
        bool "Suppress duplicate symbol warnings"
        depends on !ENFORCE_UNIQUE_SYMBOLS
-       ---help---
+       help
          Multiple symbols with the same name aren't generally a problem
          unless Live patching is to be used, so these warnings can be
          suppressed by enabling this option.  Certain other options (known
@@ -464,7 +464,7 @@ config SUPPRESS_DUPLICATE_SYMBOL_WARNINGS
 config CMDLINE
        string "Built-in hypervisor command string" if EXPERT
        default ""
-       ---help---
+       help
          Enter arguments here that should be compiled into the hypervisor
          image and used at boot time. When the system boots, this string
          will be parsed prior to the bootloader command line. So if a
@@ -475,7 +475,7 @@ config CMDLINE_OVERRIDE
        bool "Built-in command line overrides bootloader arguments"
        default n
        depends on CMDLINE != ""
-       ---help---
+       help
          Set this option to 'Y' to have the hypervisor ignore the bootloader
          command line, and use ONLY the built-in command line.
 
@@ -485,7 +485,7 @@ config CMDLINE_OVERRIDE
 config DOM0_MEM
        string "Default value for dom0_mem boot parameter"
        default ""
-       ---help---
+       help
          Sets a default value for dom0_mem, e.g. "512M".
          The specified string will be used for the dom0_mem parameter in
          case it was not specified on the command line.
@@ -507,7 +507,7 @@ config DTB_FILE
 config TRACEBUFFER
        bool "Enable tracing infrastructure" if EXPERT
        default y
-       ---help---
+       help
          Enable tracing infrastructure and pre-defined tracepoints within Xen.
          This will allow live information about Xen's execution and performance
          to be collected at run time for debugging or performance analysis.
diff --git a/xen/common/sched/Kconfig b/xen/common/sched/Kconfig
index b2ef0c99a3..18ca1ce7ab 100644
--- a/xen/common/sched/Kconfig
+++ b/xen/common/sched/Kconfig
@@ -4,20 +4,20 @@ menu "Schedulers"
 config SCHED_CREDIT
        bool "Credit scheduler support"
        default y
-       ---help---
+       help
          The traditional credit scheduler is a general purpose scheduler.
 
 config SCHED_CREDIT2
        bool "Credit2 scheduler support"
        default y
-       ---help---
+       help
          The credit2 scheduler is a general purpose scheduler that is
          optimized for lower latency and higher VM density.
 
 config SCHED_RTDS
        bool "RTDS scheduler support (UNSUPPORTED)" if UNSUPPORTED
        default DEBUG
-       ---help---
+       help
          The RTDS scheduler is a soft and firm real-time scheduler for
          multicore, targeted for embedded, automotive, graphics and gaming
          in the cloud, and general low-latency workloads.
@@ -25,14 +25,14 @@ config SCHED_RTDS
 config SCHED_ARINC653
        bool "ARINC653 scheduler support (UNSUPPORTED)" if UNSUPPORTED
        default DEBUG
-       ---help---
+       help
          The ARINC653 scheduler is a hard real-time scheduler for single
          cores, targeted for avionics, drones, and medical devices.
 
 config SCHED_NULL
        bool "Null scheduler support (UNSUPPORTED)" if UNSUPPORTED
        default PV_SHIM || DEBUG
-       ---help---
+       help
          The null scheduler is a static, zero overhead scheduler,
          for when there always are less vCPUs than pCPUs, typically
          in embedded or HPC scenarios.
diff --git a/xen/drivers/passthrough/Kconfig b/xen/drivers/passthrough/Kconfig
index 864fcf3b0c..78edd80536 100644
--- a/xen/drivers/passthrough/Kconfig
+++ b/xen/drivers/passthrough/Kconfig
@@ -6,7 +6,7 @@ if ARM
 config ARM_SMMU
        bool "ARM SMMUv1 and v2 driver"
        default y
-       ---help---
+       help
          Support for implementations of the ARM System MMU architecture
          versions 1 and 2.
 
@@ -16,7 +16,7 @@ config ARM_SMMU
 config ARM_SMMU_V3
        bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support" if EXPERT
        depends on ARM_64 && (!ACPI || BROKEN)
-       ---help---
+       help
         Support for implementations of the ARM System MMU architecture
         version 3. Driver is in experimental stage and should not be used in
         production.
@@ -27,7 +27,7 @@ config ARM_SMMU_V3
 config IPMMU_VMSA
        bool "Renesas IPMMU-VMSA found in R-Car Gen3/Gen4 SoCs"
        depends on ARM_64
-       ---help---
+       help
          Support for implementations of the Renesas IPMMU-VMSA found
          in R-Car Gen3/Gen4 SoCs.
 
@@ -68,7 +68,7 @@ choice
        prompt "IOMMU device quarantining default behavior"
        depends on HAS_PCI
        default IOMMU_QUARANTINE_BASIC
-       ---help---
+       help
          When a PCI device is assigned to an untrusted domain, it is possible
          for that domain to program the device to DMA to an arbitrary address.
          The IOMMU is used to protect the host from malicious DMA by making
diff --git a/xen/drivers/video/Kconfig b/xen/drivers/video/Kconfig
index 41ca503cc9..245030beea 100644
--- a/xen/drivers/video/Kconfig
+++ b/xen/drivers/video/Kconfig
@@ -7,7 +7,7 @@ config VGA
        select VIDEO
        depends on X86
        default y if !PV_SHIM_EXCLUSIVE
-       ---help---
+       help
          Enable VGA output for the Xen hypervisor.
 
          If unsure, say Y.
diff --git a/xen/tools/kconfig/lexer.l b/xen/tools/kconfig/lexer.l
index 6354c905b0..4b7339ff4c 100644
--- a/xen/tools/kconfig/lexer.l
+++ b/xen/tools/kconfig/lexer.l
@@ -105,7 +105,7 @@ n   [A-Za-z0-9_-]
 "endchoice"            return T_ENDCHOICE;
 "endif"                        return T_ENDIF;
 "endmenu"              return T_ENDMENU;
-"help"|"---help---"    return T_HELP;
+"help"                 return T_HELP;
 "hex"                  return T_HEX;
 "if"                   return T_IF;
 "imply"                        return T_IMPLY;
--
generated by git-patchbot for /home/xen/git/xen.git#master



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.