|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen staging] xen/riscv: introduce atomic.h
commit 3cd46d4ec8b9fa6b05c823e1f48cb6dc6a837e78
Author: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
AuthorDate: Fri May 17 15:54:55 2024 +0200
Commit: Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Thu May 23 10:12:12 2024 +0200
xen/riscv: introduce atomic.h
Initially the patch was introduced by Bobby, who takes the header from
Linux kernel.
The following changes were done on top of Bobby's changes:
- atomic##prefix##_*xchg_*(atomic##prefix##_t *v, c_t n) were updated
to use__*xchg_generic()
- drop casts in write_atomic() as they are unnecessary
- drop introduction of WRITE_ONCE() and READ_ONCE().
Xen provides ACCESS_ONCE()
- remove zero-length array access in read_atomic()
- drop defines similar to pattern:
#define atomic_add_return_relaxed atomic_add_return_relaxed
- move not RISC-V specific functions to asm-generic/atomics-ops.h
- drop atomic##prefix##_{cmp}xchg_{release, aquire, release}() as they
are not used in Xen.
- update the defintion of atomic##prefix##_{cmp}xchg according to
{cmp}xchg() implementation in Xen.
- some ATOMIC_OP() macros were updated:
- drop size argument for ATOMIC_OP which defines atomic##prefix##_xchg()
and atomic##prefix##_cmpxchg().
- drop c_op argument for ATOMIC_OPS which defines ATOMIC_OPS(and, and),
ATOMIC_OPS( or, or), ATOMIC_OPS(xor, xor), ATOMIC_OPS(add, add, +),
ATOMIC_OPS(sub, add, -) as c_op is always "+" for them.
- drop "" from definition of __atomic_{acquire/release"}_fence.
The current implementation is the same with 8e86f0b409a4
("arm64: atomics: fix use of acquire + release for full barrier
semantics") [1].
RISC-V could combine acquire and release into the SC
instructions and it could reduce a fence instruction to gain better
performance. Here is related description from RISC-V ISA 10.2
Load-Reserved/Store-Conditional Instructions:
- .aq: The LR/SC sequence can be given acquire semantics by
setting the aq bit on the LR instruction.
- .rl: The LR/SC sequence can be given release semantics by
setting the rl bit on the SC instruction.
- .aqrl: Setting the aq bit on the LR instruction, and setting
both the aq and the rl bit on the SC instruction makes
the LR/SC sequence sequentially consistent, meaning that
it cannot be reordered with earlier or later memory
operations from the same hart.
Software should not set the rl bit on an LR instruction unless
the aq bit is also set, nor should software set the aq bit on an
SC instruction unless the rl bit is also set. LR.rl and SC.aq
instructions are not guaranteed to provide any stronger ordering
than those with both bits clear, but may result in lower
performance.
Also, I way of transforming ".rl + full barrier" to ".aqrl" was approved
by (the author of the RVWMO spec) [2]
[1]
https://patchwork.kernel.org/project/linux-arm-kernel/patch/1391516953-14541-1-git-send-email-will.deacon@xxxxxxx/
[2]
https://lore.kernel.org/linux-riscv/41e01514-74ca-84f2-f5cc-2645c444fd8e@xxxxxxxxxx/
Signed-off-by: Bobby Eshleman <bobbyeshleman@xxxxxxxxx>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
---
xen/arch/riscv/include/asm/atomic.h | 280 +++++++++++++++++++++++++++++++++++
xen/include/asm-generic/atomic-ops.h | 97 ++++++++++++
2 files changed, 377 insertions(+)
diff --git a/xen/arch/riscv/include/asm/atomic.h
b/xen/arch/riscv/include/asm/atomic.h
new file mode 100644
index 0000000000..31b91a79c8
--- /dev/null
+++ b/xen/arch/riscv/include/asm/atomic.h
@@ -0,0 +1,280 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Taken and modified from Linux.
+ *
+ * The following changes were done:
+ * - * atomic##prefix##_*xchg_*(atomic##prefix##_t *v, c_t n) were updated
+ * to use__*xchg_generic()
+ * - drop casts in write_atomic() as they are unnecessary
+ * - drop introduction of WRITE_ONCE() and READ_ONCE().
+ * Xen provides ACCESS_ONCE()
+ * - remove zero-length array access in read_atomic()
+ * - drop defines similar to pattern
+ * #define atomic_add_return_relaxed atomic_add_return_relaxed
+ * - move not RISC-V specific functions to asm-generic/atomics-ops.h
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ * Copyright (C) 2024 Vates SAS
+ */
+
+#ifndef _ASM_RISCV_ATOMIC_H
+#define _ASM_RISCV_ATOMIC_H
+
+#include <xen/atomic.h>
+
+#include <asm/cmpxchg.h>
+#include <asm/fence.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+void __bad_atomic_size(void);
+
+/*
+ * Legacy from Linux kernel. For some reason they wanted to have ordered
+ * read/write access. Thereby read* is used instead of read*_cpu()
+ */
+static always_inline void read_atomic_size(const volatile void *p,
+ void *res,
+ unsigned int size)
+{
+ switch ( size )
+ {
+ case 1: *(uint8_t *)res = readb(p); break;
+ case 2: *(uint16_t *)res = readw(p); break;
+ case 4: *(uint32_t *)res = readl(p); break;
+#ifndef CONFIG_RISCV_32
+ case 8: *(uint32_t *)res = readq(p); break;
+#endif
+ default: __bad_atomic_size(); break;
+ }
+}
+
+#define read_atomic(p) ({ \
+ union { typeof(*(p)) val; char c[sizeof(*(p))]; } x_; \
+ read_atomic_size(p, x_.c, sizeof(*(p))); \
+ x_.val; \
+})
+
+static always_inline void _write_atomic(volatile void *p,
+ unsigned long x, unsigned int size)
+{
+ switch ( size )
+ {
+ case 1: writeb(x, p); break;
+ case 2: writew(x, p); break;
+ case 4: writel(x, p); break;
+#ifndef CONFIG_RISCV_32
+ case 8: writeq(x, p); break;
+#endif
+ default: __bad_atomic_size(); break;
+ }
+}
+
+#define write_atomic(p, x) \
+({ \
+ typeof(*(p)) x_ = (x); \
+ _write_atomic(p, x_, sizeof(*(p))); \
+})
+
+static always_inline void _add_sized(volatile void *p,
+ unsigned long x, unsigned int size)
+{
+ switch ( size )
+ {
+ case 1:
+ {
+ volatile uint8_t *ptr = p;
+ write_atomic(ptr, read_atomic(ptr) + x);
+ break;
+ }
+ case 2:
+ {
+ volatile uint16_t *ptr = p;
+ write_atomic(ptr, read_atomic(ptr) + x);
+ break;
+ }
+ case 4:
+ {
+ volatile uint32_t *ptr = p;
+ write_atomic(ptr, read_atomic(ptr) + x);
+ break;
+ }
+#ifndef CONFIG_RISCV_32
+ case 8:
+ {
+ volatile uint64_t *ptr = p;
+ write_atomic(ptr, read_atomic(ptr) + x);
+ break;
+ }
+#endif
+ default: __bad_atomic_size(); break;
+ }
+}
+
+#define add_sized(p, x) \
+({ \
+ typeof(*(p)) x_ = (x); \
+ _add_sized(p, x_, sizeof(*(p))); \
+})
+
+#define __atomic_acquire_fence() \
+ asm volatile ( RISCV_ACQUIRE_BARRIER ::: "memory" )
+
+#define __atomic_release_fence() \
+ asm volatile ( RISCV_RELEASE_BARRIER ::: "memory" )
+
+/*
+ * First, the atomic ops that have no ordering constraints and therefor don't
+ * have the AQ or RL bits set. These don't return anything, so there's only
+ * one version to worry about.
+ */
+#define ATOMIC_OP(op, asm_op, unary_op, asm_type, c_type, prefix) \
+static inline \
+void atomic##prefix##_##op(c_type i, atomic##prefix##_t *v) \
+{ \
+ asm volatile ( \
+ " amo" #asm_op "." #asm_type " zero, %1, %0" \
+ : "+A" (v->counter) \
+ : "r" (unary_op i) \
+ : "memory" ); \
+} \
+
+/*
+ * Only CONFIG_GENERIC_ATOMIC64=y was ported to Xen that is the reason why
+ * last argument for ATOMIC_OP isn't used.
+ */
+#define ATOMIC_OPS(op, asm_op, unary_op) \
+ ATOMIC_OP (op, asm_op, unary_op, w, int, )
+
+ATOMIC_OPS(add, add, +)
+ATOMIC_OPS(sub, add, -)
+ATOMIC_OPS(and, and, +)
+ATOMIC_OPS( or, or, +)
+ATOMIC_OPS(xor, xor, +)
+
+#undef ATOMIC_OP
+#undef ATOMIC_OPS
+
+#include <asm-generic/atomic-ops.h>
+
+/*
+ * Atomic ops that have ordered variant.
+ * There's two flavors of these: the arithmatic ops have both fetch and return
+ * versions, while the logical ops only have fetch versions.
+ */
+#define ATOMIC_FETCH_OP(op, asm_op, unary_op, asm_type, c_type, prefix) \
+static inline \
+c_type atomic##prefix##_fetch_##op(c_type i, atomic##prefix##_t *v) \
+{ \
+ register c_type ret; \
+ asm volatile ( \
+ " amo" #asm_op "." #asm_type ".aqrl %1, %2, %0" \
+ : "+A" (v->counter), "=r" (ret) \
+ : "r" (unary_op i) \
+ : "memory" ); \
+ return ret; \
+}
+
+#define ATOMIC_OP_RETURN(op, asm_op, c_op, unary_op, asm_type, c_type, prefix)
\
+static inline \
+c_type atomic##prefix##_##op##_return(c_type i, atomic##prefix##_t *v) \
+{ \
+ return atomic##prefix##_fetch_##op(i, v) c_op (unary_op i); \
+}
+
+/*
+ * Only CONFIG_GENERIC_ATOMIC64=y was ported to Xen that is the reason why
+ * last argument of ATOMIC_FETCH_OP, ATOMIC_OP_RETURN isn't used.
+ */
+#define ATOMIC_OPS(op, asm_op, unary_op) \
+ ATOMIC_FETCH_OP( op, asm_op, unary_op, w, int, ) \
+ ATOMIC_OP_RETURN(op, asm_op, +, unary_op, w, int, )
+
+ATOMIC_OPS(add, add, +)
+ATOMIC_OPS(sub, add, -)
+
+#undef ATOMIC_OPS
+
+#define ATOMIC_OPS(op, asm_op) \
+ ATOMIC_FETCH_OP(op, asm_op, +, w, int, )
+
+ATOMIC_OPS(and, and)
+ATOMIC_OPS( or, or)
+ATOMIC_OPS(xor, xor)
+
+#undef ATOMIC_OPS
+
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+
+/* This is required to provide a full barrier on success. */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int prev, rc;
+
+ asm volatile (
+ "0: lr.w %[p], %[c]\n"
+ " beq %[p], %[u], 1f\n"
+ " add %[rc], %[p], %[a]\n"
+ " sc.w.aqrl %[rc], %[rc], %[c]\n"
+ " bnez %[rc], 0b\n"
+ "1:\n"
+ : [p] "=&r" (prev), [rc] "=&r" (rc), [c] "+A" (v->counter)
+ : [a] "r" (a), [u] "r" (u)
+ : "memory");
+ return prev;
+}
+
+static inline int atomic_sub_if_positive(atomic_t *v, int offset)
+{
+ int prev, rc;
+
+ asm volatile (
+ "0: lr.w %[p], %[c]\n"
+ " sub %[rc], %[p], %[o]\n"
+ " bltz %[rc], 1f\n"
+ " sc.w.aqrl %[rc], %[rc], %[c]\n"
+ " bnez %[rc], 0b\n"
+ "1:\n"
+ : [p] "=&r" (prev), [rc] "=&r" (rc), [c] "+A" (v->counter)
+ : [o] "r" (offset)
+ : "memory" );
+ return prev - offset;
+}
+
+/*
+ * atomic_{cmp,}xchg is required to have exactly the same ordering semantics as
+ * {cmp,}xchg and the operations that return.
+ */
+#define ATOMIC_OP(c_t, prefix) \
+static inline \
+c_t atomic##prefix##_xchg(atomic##prefix##_t *v, c_t n) \
+{ \
+ return __xchg(&v->counter, n, sizeof(c_t)); \
+} \
+static inline \
+c_t atomic##prefix##_cmpxchg(atomic##prefix##_t *v, c_t o, c_t n) \
+{ \
+ return __cmpxchg(&v->counter, o, n, sizeof(c_t)); \
+}
+
+#define ATOMIC_OPS() \
+ ATOMIC_OP(int, )
+
+ATOMIC_OPS()
+
+#undef ATOMIC_OPS
+#undef ATOMIC_OP
+
+#endif /* _ASM_RISCV_ATOMIC_H */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/include/asm-generic/atomic-ops.h
b/xen/include/asm-generic/atomic-ops.h
new file mode 100644
index 0000000000..98dd907942
--- /dev/null
+++ b/xen/include/asm-generic/atomic-ops.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * The header provides default implementations for every xen/atomic.h-provided
+ * forward inline declaration that can be synthesized from other atomic
+ * functions or being created from scratch.
+ */
+#ifndef _ASM_GENERIC_ATOMIC_OPS_H_
+#define _ASM_GENERIC_ATOMIC_OPS_H_
+
+#include <xen/atomic.h>
+#include <xen/lib.h>
+
+#ifndef ATOMIC_READ
+static inline int atomic_read(const atomic_t *v)
+{
+ return ACCESS_ONCE(v->counter);
+}
+#endif
+
+#ifndef _ATOMIC_READ
+static inline int _atomic_read(atomic_t v)
+{
+ return v.counter;
+}
+#endif
+
+#ifndef ATOMIC_SET
+static inline void atomic_set(atomic_t *v, int i)
+{
+ ACCESS_ONCE(v->counter) = i;
+}
+#endif
+
+#ifndef _ATOMIC_SET
+static inline void _atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+}
+#endif
+
+#ifndef ATOMIC_SUB_AND_TEST
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+ return atomic_sub_return(i, v) == 0;
+}
+#endif
+
+#ifndef ATOMIC_INC_AND_TEST
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+ return atomic_add_return(1, v) == 0;
+}
+#endif
+
+#ifndef ATOMIC_INC
+static inline void atomic_inc(atomic_t *v)
+{
+ atomic_add(1, v);
+}
+#endif
+
+#ifndef ATOMIC_INC_RETURN
+static inline int atomic_inc_return(atomic_t *v)
+{
+ return atomic_add_return(1, v);
+}
+#endif
+
+#ifndef ATOMIC_DEC
+static inline void atomic_dec(atomic_t *v)
+{
+ atomic_sub(1, v);
+}
+#endif
+
+#ifndef ATOMIC_DEC_RETURN
+static inline int atomic_dec_return(atomic_t *v)
+{
+ return atomic_sub_return(1, v);
+}
+#endif
+
+#ifndef ATOMIC_DEC_AND_TEST
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+ return atomic_sub_return(1, v) == 0;
+}
+#endif
+
+#ifndef ATOMIC_ADD_NEGATIVE
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+ return atomic_add_return(i, v) < 0;
+}
+#endif
+
+#endif /* _ASM_GENERIC_ATOMIC_OPS_H_ */
--
generated by git-patchbot for /home/xen/git/xen.git#staging
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |