|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen master] arm: Drop deprecated early printk platform options
commit 4e1a3337455ea82f05b46fa467106ce6ec71c102
Author: Michal Orzel <michal.orzel@xxxxxxx>
AuthorDate: Fri Sep 13 08:15:29 2024 +0200
Commit: Julien Grall <julien@xxxxxxx>
CommitDate: Mon Sep 16 21:54:27 2024 +0100
arm: Drop deprecated early printk platform options
The predefined configurations for early printk have been deprecated for
a sufficient amount of time. Let's finally remove them.
Note:
In order not to lose these predefined configurations, I wrote a wiki
page: https://wiki.xenproject.org/wiki/Xen_on_ARM_Early_Printk
Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx>
Reviewed-by: Bertrand Marquis <bertrand.marquis@xxxxxxx>
---
docs/misc/arm/early-printk.txt | 4 --
xen/arch/arm/Kconfig.debug | 155 +++--------------------------------------
2 files changed, 9 insertions(+), 150 deletions(-)
diff --git a/docs/misc/arm/early-printk.txt b/docs/misc/arm/early-printk.txt
index bc2d65aa2e..e6b9124a38 100644
--- a/docs/misc/arm/early-printk.txt
+++ b/docs/misc/arm/early-printk.txt
@@ -35,8 +35,4 @@ Other options depends on the driver selected:
- For all other uarts there are no additional options.
-As a convenience it is also possible to select from a list of
-predefined configurations available in the list of choice for "Early
-printk" for specific platform.
-
By default early printk is disabled.
diff --git a/xen/arch/arm/Kconfig.debug b/xen/arch/arm/Kconfig.debug
index eec860e88e..2fa0acd2a3 100644
--- a/xen/arch/arm/Kconfig.debug
+++ b/xen/arch/arm/Kconfig.debug
@@ -13,177 +13,67 @@ choice
Choose one of the UART drivers for early printk, then you'll
have to specify the parameters, like the base address.
- Deprecated: Alternatively, there are platform specific options
- which will have default values for the various parameters. But
- such option will soon be removed.
-
config EARLY_UART_CHOICE_8250
select EARLY_UART_8250
bool "Early printk via 8250 UART"
help
Say Y here if you wish the early printk to direct their
- output to a 8250 UART. You can use this option to
- provide the parameters for the 8250 UART rather than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a 8250 UART.
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will soon be removed.
config EARLY_UART_CHOICE_CADENCE
select EARLY_UART_CADENCE
depends on ARM_64
bool "Early printk via Cadence UART"
help
Say Y here if you wish the early printk to direct their
- output to a Cadence UART. You can use this option to
- provide the parameters for the Cadence UART rather than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a Cadence UART.
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will soon be removed.
config EARLY_UART_CHOICE_EXYNOS4210
select EARLY_UART_EXYNOS4210
depends on ARM_32
bool "Early printk via Exynos4210 UART"
help
Say Y here if you wish the early printk to direct their
- output to a Exynos 4210 UART. You can use this option to
- provide the parameters for the Exynos 4210 UART rather
than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a Exynos 4210 UART.
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will soon be removed.
config EARLY_UART_CHOICE_IMX_LPUART
select EARLY_UART_IMX_LPUART
depends on ARM_64
bool "Early printk via i.MX LPUART"
help
Say Y here if you wish the early printk to direct their
- output to a i.MX LPUART. You can use this option to
- provide the parameters for the i.MX LPUART rather than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a i.MX LPUART.
+
config EARLY_UART_CHOICE_MESON
select EARLY_UART_MESON
depends on ARM_64
bool "Early printk via MESON UART"
help
Say Y here if you wish the early printk to direct their
- output to a MESON UART. You can use this option to
- provide the parameters for the MESON UART rather than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a MESON UART.
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will soon be removed.
config EARLY_UART_CHOICE_MVEBU
select EARLY_UART_MVEBU
depends on ARM_64
bool "Early printk via MVEBU UART"
help
Say Y here if you wish the early printk to direct their
- output to a MVEBU UART. You can use this option to
- provide the parameters for the MVEBU UART rather than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a MVEBU UART.
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will soon be removed.
config EARLY_UART_CHOICE_PL011
select EARLY_UART_PL011
bool "Early printk via PL011 UART"
help
Say Y here if you wish the early printk to direct their
- output to a PL011 UART. You can use this option to
- provide the parameters for the PL011 UART rather than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a PL011 UART.
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will soon be removed.
config EARLY_UART_CHOICE_SCIF
select EARLY_UART_SCIF
bool "Early printk via SCIF UART"
help
Say Y here if you wish the early printk to direct their
- output to a SCIF UART. You can use this option to
- provide the parameters for the SCIF UART rather than
- selecting one of the platform specific options below if
- you know the parameters for the port.
+ output to a SCIF UART.
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will soon be removed.
-
- config EARLY_PRINTK_BRCM
- bool "Early printk with 8250 on Broadcom 7445D0 boards with A15
processors"
- select EARLY_UART_8250
- config EARLY_PRINTK_DRA7
- bool "Early printk with 8250 on DRA7 platform"
- select EARLY_UART_8250
- config EARLY_PRINTK_EXYNOS5250
- bool "Early printk with the second UART on Exynos5250"
- select EARLY_UART_EXYNOS4210
- depends on ARM_32
- config EARLY_PRINTK_FASTMODEL
- bool "Early printk with pl011 on ARM Fastmodel software
emulators"
- select EARLY_UART_PL011
- config EARLY_PRINTK_HIKEY960
- bool "Early printk with pl011 with Hikey 960"
- select EARLY_UART_PL011
- config EARLY_PRINTK_JUNO
- bool "Early printk with pl011 on Juno platform"
- select EARLY_UART_PL011
- config EARLY_PRINTK_LAGER
- bool "Early printk with SCIF0 on Renesas Lager board (R-Car H2
processor)"
- select EARLY_UART_SCIF
- config EARLY_PRINTK_MIDWAY
- bool "Early printk with pl011 on Calxeda Midway processors"
- select EARLY_UART_PL011
- config EARLY_PRINTK_MVEBU
- bool "Early printk with MVEBU for Marvell Armada 3700 SoCs"
- select EARLY_UART_MVEBU
- depends on ARM_64
- config EARLY_PRINTK_OMAP5432
- bool "Early printk with UART3 on TI OMAP5432 processors"
- select EARLY_UART_8250
- config EARLY_PRINTK_RCAR3
- bool "Early printk with SCIF2 on Renesas R-Car Gen3 processors"
- select EARLY_UART_SCIF
- config EARLY_PRINTK_SEATTLE
- bool "Early printk with pl011 for AMD Seattle processor"
- select EARLY_UART_PL011
- config EARLY_PRINTK_SUN6I
- bool "Early printk with 8250 on Allwinner A31 processors"
- select EARLY_UART_8250
- config EARLY_PRINTK_SUN7I
- bool "Early printk with 8250 on Allwinner A20 processors"
- select EARLY_UART_8250
- config EARLY_PRINTK_THUNDERX
- bool "Early printk with pl011 for Cavium ThunderX processor"
- select EARLY_UART_PL011
- depends on ARM_64
- config EARLY_PRINTK_VEXPRESS
- bool "Early printk with pl011 for versatile express"
- select EARLY_UART_PL011
- config EARLY_PRINTK_XGENE_MCDIVITT
- bool "Early printk with 820 on Xgene mcdivitt platform"
- select EARLY_UART_8250
- config EARLY_PRINTK_XGENE_STORM
- bool "Early printk with 820 on Xgene storm platform"
- select EARLY_UART_8250
- config EARLY_PRINTK_ZYNQMP
- bool "Early printk with Cadence UART for Xilinx ZynqMP SoCs"
- select EARLY_UART_CADENCE
- depends on ARM_64
endchoice
@@ -219,25 +109,6 @@ config EARLY_UART_BASE_ADDRESS
depends on EARLY_PRINTK
hex "Early printk, physical base address of debug UART"
range 0x0 0xffffffff if ARM_32
- default 0xF040AB00 if EARLY_PRINTK_BRCM
- default 0x4806A000 if EARLY_PRINTK_DRA7
- default 0x1c090000 if EARLY_PRINTK_FASTMODEL
- default 0x12c20000 if EARLY_PRINTK_EXYNOS5250
- default 0xfff32000 if EARLY_PRINTK_HIKEY960
- default 0x7ff80000 if EARLY_PRINTK_JUNO
- default 0xe6e60000 if EARLY_PRINTK_LAGER
- default 0xfff36000 if EARLY_PRINTK_MIDWAY
- default 0xd0012000 if EARLY_PRINTK_MVEBU
- default 0x48020000 if EARLY_PRINTK_OMAP5432
- default 0xe6e88000 if EARLY_PRINTK_RCAR3
- default 0xe1010000 if EARLY_PRINTK_SEATTLE
- default 0x01c28000 if EARLY_PRINTK_SUN6I
- default 0x01c28000 if EARLY_PRINTK_SUN7I
- default 0x87e024000000 if EARLY_PRINTK_THUNDERX
- default 0x1c090000 if EARLY_PRINTK_VEXPRESS
- default 0x1c021000 if EARLY_PRINTK_XGENE_MCDIVITT
- default 0x1c020000 if EARLY_PRINTK_XGENE_STORM
- default 0xff000000 if EARLY_PRINTK_ZYNQMP
config EARLY_UART_PL011_BAUD_RATE
depends on EARLY_UART_PL011
@@ -250,7 +121,6 @@ config EARLY_UART_PL011_BAUD_RATE
not try to initialize the UART, so that bootloader or firmware
settings can be used for maximum compatibility.
- default 115200 if EARLY_PRINTK_FASTMODEL
default 0
config EARLY_UART_PL011_MMIO32
@@ -274,13 +144,6 @@ config EARLY_UART_8250_REG_SHIFT
Default to 0.
- default 2 if EARLY_PRINTK_BRCM
- default 2 if EARLY_PRINTK_DRA7
- default 2 if EARLY_PRINTK_OMAP5432
- default 2 if EARLY_PRINTK_SUN6I
- default 2 if EARLY_PRINTK_SUN7I
- default 2 if EARLY_PRINTK_XGENE_MCDIVITT
- default 2 if EARLY_PRINTK_XGENE_STORM
default 0
choice EARLY_UART_SCIF_VERSION
--
generated by git-patchbot for /home/xen/git/xen.git#master
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |