[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[xen staging-4.19] blkif: reconcile protocol specification with in-use implementations



commit 933416b13966a3fa2a37b1f645c23afbd8fb6d09
Author:     Roger Pau Monné <roger.pau@xxxxxxxxxx>
AuthorDate: Tue Sep 24 14:43:50 2024 +0200
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Sep 24 14:43:50 2024 +0200

    blkif: reconcile protocol specification with in-use implementations
    
    Current blkif implementations (both backends and frontends) have all slight
    differences about how they handle the 'sector-size' xenstore node, and how
    other fields are derived from this value or hardcoded to be expressed in 
units
    of 512 bytes.
    
    To give some context, this is an excerpt of how different implementations 
use
    the value in 'sector-size' as the base unit for to other fields rather than
    just to set the logical sector size of the block device:
    
                            â?? sectors xenbus node â?? requests sector_number 
â?? requests {first,last}_sect
    
â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??
    FreeBSD blk{front,back} â??     sector-size     â??      sector-size       
â??           512
    
â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??
    Linux blk{front,back}   â??         512         â??          512           
â??           512
    
â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??
    QEMU blkback            â??     sector-size     â??      sector-size       
â??       sector-size
    
â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??
    Windows blkfront        â??     sector-size     â??      sector-size       
â??       sector-size
    
â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â?¼â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??â??
    MiniOS                  â??     sector-size     â??          512           
â??           512
    
    An attempt was made by 67e1c050e36b in order to change the base units of the
    request fields and the xenstore 'sectors' node.  That however only lead to 
more
    confusion, as the specification now clearly diverged from the reference
    implementation in Linux.  Such change was only implemented for QEMU Qdisk
    and Windows PV blkfront.
    
    Partially revert to the state before 67e1c050e36b while adjusting the
    documentation for 'sectors' to match what it used to be previous to
    2fa701e5346d:
    
     * Declare 'feature-large-sector-size' deprecated.  Frontends should not 
expose
       the node, backends should not make decisions based on its presence.
    
     * Clarify that 'sectors' xenstore node and the requests fields are always 
in
       512-byte units, like it was previous to 2fa701e5346d and 67e1c050e36b.
    
    All base units for the fields used in the protocol are 512-byte based, the
    xenbus 'sector-size' field is only used to signal the logic block size.  
When
    'sector-size' is greater than 512, blkfront implementations must make sure 
that
    the offsets and sizes (despite being expressed in 512-byte units) are 
aligned
    to the logical block size specified in 'sector-size', otherwise the backend
    will fail to process the requests.
    
    This will require changes to some of the frontends and backends in order to
    properly support 'sector-size' nodes greater than 512.
    
    Fixes: 2fa701e5346d ('blkif.h: Provide more complete documentation of the 
blkif interface')
    Fixes: 67e1c050e36b ('public/io/blkif.h: try to fix the semantics of sector 
based quantities')
    Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Reviewed-by: Juergen Gross <jgross@xxxxxxxx>
    Reviewed-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
    master commit: 221f2748e8dabe8361b8cdfcffbeab9102c4c899
    master date: 2024-09-12 14:04:56 +0200
---
 xen/include/public/io/blkif.h | 52 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 39 insertions(+), 13 deletions(-)

diff --git a/xen/include/public/io/blkif.h b/xen/include/public/io/blkif.h
index 22f1eef0c0..9b00d633d3 100644
--- a/xen/include/public/io/blkif.h
+++ b/xen/include/public/io/blkif.h
@@ -237,12 +237,16 @@
  * sector-size
  *      Values:         <uint32_t>
  *
- *      The logical block size, in bytes, of the underlying storage. This
- *      must be a power of two with a minimum value of 512.
+ *      The logical block size, in bytes, of the underlying storage. This must
+ *      be a power of two with a minimum value of 512.  The sector size should
+ *      only be used for request segment length and alignment.
  *
- *      NOTE: Because of implementation bugs in some frontends this must be
- *            set to 512, unless the frontend advertizes a non-zero value
- *            in its "feature-large-sector-size" xenbus node. (See below).
+ *      When exposing a device that uses a logical sector size of 4096, the
+ *      only difference xenstore wise will be that 'sector-size' (and possibly
+ *      'physical-sector-size' if supported by the backend) will be 4096, but
+ *      the 'sectors' node will still be calculated using 512 byte units.  The
+ *      sector base units in the ring requests fields will all be 512 byte
+ *      based despite the logical sector size exposed in 'sector-size'.
  *
  * physical-sector-size
  *      Values:         <uint32_t>
@@ -254,9 +258,9 @@
  * sectors
  *      Values:         <uint64_t>
  *
- *      The size of the backend device, expressed in units of "sector-size".
- *      The product of "sector-size" and "sectors" must also be an integer
- *      multiple of "physical-sector-size", if that node is present.
+ *      The size of the backend device, expressed in units of 512b.  The
+ *      product of "sectors" * 512 must also be an integer multiple of
+ *      "physical-sector-size", if that node is present.
  *
  *****************************************************************************
  *                            Frontend XenBus Nodes
@@ -338,6 +342,7 @@
  * feature-large-sector-size
  *      Values:         0/1 (boolean)
  *      Default Value:  0
+ *      Notes:          DEPRECATED, 12
  *
  *      A value of "1" indicates that the frontend will correctly supply and
  *      interpret all sector-based quantities in terms of the "sector-size"
@@ -411,6 +416,11 @@
  *(10) The discard-secure property may be present and will be set to 1 if the
  *     backing device supports secure discard.
  *(11) Only used by Linux and NetBSD.
+ *(12) Possibly only ever implemented by the QEMU Qdisk backend and the Windows
+ *     PV block frontend.  Other backends and frontends supported 'sector-size'
+ *     values greater than 512 before such feature was added.  Frontends should
+ *     not expose this node, neither should backends make any decisions based
+ *     on it being exposed by the frontend.
  */
 
 /*
@@ -619,11 +629,14 @@
 #define BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST 8
 
 /*
- * NB. 'first_sect' and 'last_sect' in blkif_request_segment, as well as
- * 'sector_number' in blkif_request, blkif_request_discard and
- * blkif_request_indirect are sector-based quantities. See the description
- * of the "feature-large-sector-size" frontend xenbus node above for
- * more information.
+ * NB. 'first_sect' and 'last_sect' in blkif_request_segment are all in units
+ * of 512 bytes, despite the 'sector-size' xenstore node possibly having a
+ * value greater than 512.
+ *
+ * The value in 'first_sect' and 'last_sect' fields must be setup so that the
+ * resulting segment offset and size is aligned to the logical sector size
+ * reported by the 'sector-size' xenstore node, see 'Backend Device Properties'
+ * section.
  */
 struct blkif_request_segment {
     grant_ref_t gref;        /* reference to I/O buffer frame        */
@@ -634,6 +647,10 @@ struct blkif_request_segment {
 
 /*
  * Starting ring element for any I/O request.
+ *
+ * The 'sector_number' field is in units of 512b, despite the value of the
+ * 'sector-size' xenstore node.  Note however that the offset in
+ * 'sector_number' must be aligned to 'sector-size'.
  */
 struct blkif_request {
     uint8_t        operation;    /* BLKIF_OP_???                         */
@@ -648,6 +665,10 @@ typedef struct blkif_request blkif_request_t;
 /*
  * Cast to this structure when blkif_request.operation == BLKIF_OP_DISCARD
  * sizeof(struct blkif_request_discard) <= sizeof(struct blkif_request)
+ *
+ * The 'sector_number' field is in units of 512b, despite the value of the
+ * 'sector-size' xenstore node.  Note however that the offset in
+ * 'sector_number' must be aligned to 'sector-size'.
  */
 struct blkif_request_discard {
     uint8_t        operation;    /* BLKIF_OP_DISCARD                     */
@@ -660,6 +681,11 @@ struct blkif_request_discard {
 };
 typedef struct blkif_request_discard blkif_request_discard_t;
 
+/*
+ * The 'sector_number' field is in units of 512b, despite the value of the
+ * 'sector-size' xenstore node.  Note however that the offset in
+ * 'sector_number' must be aligned to 'sector-size'.
+ */
 struct blkif_request_indirect {
     uint8_t        operation;    /* BLKIF_OP_INDIRECT                    */
     uint8_t        indirect_op;  /* BLKIF_OP_{READ/WRITE}                */
--
generated by git-patchbot for /home/xen/git/xen.git#staging-4.19



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.