|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [qemu-xen staging-4.19] hw/ide/ahci: PxCI should not get cleared when ERR_STAT is set
commit f7cca09987983644d054fc4f4feb8414dcd624c5
Author: Niklas Cassel <niklas.cassel@xxxxxxx>
AuthorDate: Fri Jun 9 16:08:42 2023 +0200
Commit: Michael Tokarev <mjt@xxxxxxxxxx>
CommitDate: Sun Sep 10 19:39:58 2023 +0300
hw/ide/ahci: PxCI should not get cleared when ERR_STAT is set
For NCQ, PxCI is cleared on command queued successfully.
For non-NCQ, PxCI is cleared on command completed successfully.
Successfully means ERR_STAT, BUSY and DRQ are all cleared.
A command that has ERR_STAT set, does not get to clear PxCI.
See AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and RegFIS:ClearCI,
and 5.3.16.5 ERR:FatalTaskfile.
In the case of non-NCQ commands, not clearing PxCI is needed in order
for host software to be able to see which command slot that failed.
Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxx>
Message-id: 20230609140844.202795-7-nks@xxxxxxxxxxx
Signed-off-by: John Snow <jsnow@xxxxxxxxxx>
(cherry picked from commit 1a16ce64fda11bdf50f0c4ab5d9fdde72c1383a2)
Signed-off-by: Michael Tokarev <mjt@xxxxxxxxxx>
---
hw/ide/ahci.c | 7 ++-
tests/qtest/libqos/ahci.c | 106 ++++++++++++++++++++++++++++++++++------------
tests/qtest/libqos/ahci.h | 8 ++--
3 files changed, 88 insertions(+), 33 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index a93a1878de..a7b487ff33 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -1523,7 +1523,8 @@ static void ahci_clear_cmd_issue(AHCIDevice *ad, uint8_t
slot)
{
IDEState *ide_state = &ad->port.ifs[0];
- if (!(ide_state->status & (BUSY_STAT | DRQ_STAT))) {
+ if (!(ide_state->status & ERR_STAT) &&
+ !(ide_state->status & (BUSY_STAT | DRQ_STAT))) {
ad->port_regs.cmd_issue &= ~(1 << slot);
}
}
@@ -1532,6 +1533,7 @@ static void ahci_clear_cmd_issue(AHCIDevice *ad, uint8_t
slot)
static void ahci_cmd_done(const IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
+ IDEState *ide_state = &ad->port.ifs[0];
trace_ahci_cmd_done(ad->hba, ad->port_no);
@@ -1548,7 +1550,8 @@ static void ahci_cmd_done(const IDEDMA *dma)
*/
ahci_write_fis_d2h(ad, true);
- if (ad->port_regs.cmd_issue && !ad->check_bh) {
+ if (!(ide_state->status & ERR_STAT) &&
+ ad->port_regs.cmd_issue && !ad->check_bh) {
ad->check_bh = qemu_bh_new_guarded(ahci_check_cmd_bh, ad,
&ad->mem_reentrancy_guard);
qemu_bh_schedule(ad->check_bh);
diff --git a/tests/qtest/libqos/ahci.c b/tests/qtest/libqos/ahci.c
index f53f12aa99..a2c94c6e06 100644
--- a/tests/qtest/libqos/ahci.c
+++ b/tests/qtest/libqos/ahci.c
@@ -404,57 +404,110 @@ void ahci_port_clear(AHCIQState *ahci, uint8_t port)
/**
* Check a port for errors.
*/
-void ahci_port_check_error(AHCIQState *ahci, uint8_t port,
- uint32_t imask, uint8_t emask)
+void ahci_port_check_error(AHCIQState *ahci, AHCICommand *cmd)
{
+ uint8_t port = cmd->port;
uint32_t reg;
- /* The upper 9 bits of the IS register all indicate errors. */
- reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
- reg &= ~imask;
- reg >>= 23;
- g_assert_cmphex(reg, ==, 0);
+ /* If expecting TF error, ensure that TFES is set. */
+ if (cmd->errors) {
+ reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
+ ASSERT_BIT_SET(reg, AHCI_PX_IS_TFES);
+ } else {
+ /* The upper 9 bits of the IS register all indicate errors. */
+ reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
+ reg &= ~cmd->interrupts;
+ reg >>= 23;
+ g_assert_cmphex(reg, ==, 0);
+ }
- /* The Sata Error Register should be empty. */
+ /* The Sata Error Register should be empty, even when expecting TF error.
*/
reg = ahci_px_rreg(ahci, port, AHCI_PX_SERR);
g_assert_cmphex(reg, ==, 0);
+ /* If expecting TF error, and TFES was set, perform error recovery
+ * (see AHCI 1.3 section 6.2.2.1) such that we can send new commands. */
+ if (cmd->errors) {
+ /* This will clear PxCI. */
+ ahci_px_clr(ahci, port, AHCI_PX_CMD, AHCI_PX_CMD_ST);
+
+ /* The port has 500ms to disengage. */
+ usleep(500000);
+ reg = ahci_px_rreg(ahci, port, AHCI_PX_CMD);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR);
+
+ /* Clear PxIS. */
+ reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
+ ahci_px_wreg(ahci, port, AHCI_PX_IS, reg);
+
+ /* Check if we need to perform a COMRESET.
+ * Not implemented right now, as there is no reason why our QEMU model
+ * should need a COMRESET when expecting TF error. */
+ reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_BSY | AHCI_PX_TFD_STS_DRQ);
+
+ /* Enable issuing new commands. */
+ ahci_px_set(ahci, port, AHCI_PX_CMD, AHCI_PX_CMD_ST);
+ }
+
/* The TFD also has two error sections. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
- if (!emask) {
+ if (!cmd->errors) {
ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_ERR);
} else {
ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_ERR);
}
- ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR & (~emask << 8));
- ASSERT_BIT_SET(reg, AHCI_PX_TFD_ERR & (emask << 8));
+ ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR & (~cmd->errors << 8));
+ ASSERT_BIT_SET(reg, AHCI_PX_TFD_ERR & (cmd->errors << 8));
}
-void ahci_port_check_interrupts(AHCIQState *ahci, uint8_t port,
- uint32_t intr_mask)
+void ahci_port_check_interrupts(AHCIQState *ahci, AHCICommand *cmd)
{
+ uint8_t port = cmd->port;
uint32_t reg;
+ /* If we expect errors, error handling in ahci_port_check_error() will
+ * already have cleared PxIS, so in that case this function cannot verify
+ * and clear expected interrupts. */
+ if (cmd->errors) {
+ return;
+ }
+
/* Check for expected interrupts */
reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
- ASSERT_BIT_SET(reg, intr_mask);
+ ASSERT_BIT_SET(reg, cmd->interrupts);
/* Clear expected interrupts and assert all interrupts now cleared. */
- ahci_px_wreg(ahci, port, AHCI_PX_IS, intr_mask);
+ ahci_px_wreg(ahci, port, AHCI_PX_IS, cmd->interrupts);
g_assert_cmphex(ahci_px_rreg(ahci, port, AHCI_PX_IS), ==, 0);
}
-void ahci_port_check_nonbusy(AHCIQState *ahci, uint8_t port, uint8_t slot)
+void ahci_port_check_nonbusy(AHCIQState *ahci, AHCICommand *cmd)
{
+ uint8_t slot = cmd->slot;
+ uint8_t port = cmd->port;
uint32_t reg;
- /* Assert that the command slot is no longer busy (NCQ) */
+ /* For NCQ command with error PxSACT bit should still be set.
+ * For NCQ command without error, PxSACT bit should be cleared.
+ * For non-NCQ command, PxSACT bit should always be cleared. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_SACT);
- ASSERT_BIT_CLEAR(reg, (1 << slot));
+ if (cmd->props->ncq && cmd->errors) {
+ ASSERT_BIT_SET(reg, (1 << slot));
+ } else {
+ ASSERT_BIT_CLEAR(reg, (1 << slot));
+ }
- /* Non-NCQ */
+ /* For non-NCQ command with error, PxCI bit should still be set.
+ * For non-NCQ command without error, PxCI bit should be cleared.
+ * For NCQ command without error, PxCI bit should be cleared.
+ * For NCQ command with error, PxCI bit may or may not be cleared. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_CI);
- ASSERT_BIT_CLEAR(reg, (1 << slot));
+ if (!cmd->props->ncq && cmd->errors) {
+ ASSERT_BIT_SET(reg, (1 << slot));
+ } else if (!cmd->errors) {
+ ASSERT_BIT_CLEAR(reg, (1 << slot));
+ }
/* And assert that we are generally not busy. */
reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
@@ -1207,9 +1260,10 @@ void ahci_command_wait(AHCIQState *ahci, AHCICommand
*cmd)
#define RSET(REG, MASK) (BITSET(ahci_px_rreg(ahci, cmd->port, (REG)), (MASK)))
- while (RSET(AHCI_PX_TFD, AHCI_PX_TFD_STS_BSY) ||
- RSET(AHCI_PX_CI, 1 << cmd->slot) ||
- (cmd->props->ncq && RSET(AHCI_PX_SACT, 1 << cmd->slot))) {
+ while (!RSET(AHCI_PX_TFD, AHCI_PX_TFD_STS_ERR) &&
+ (RSET(AHCI_PX_TFD, AHCI_PX_TFD_STS_BSY) ||
+ RSET(AHCI_PX_CI, 1 << cmd->slot) ||
+ (cmd->props->ncq && RSET(AHCI_PX_SACT, 1 << cmd->slot)))) {
usleep(50);
}
@@ -1226,9 +1280,9 @@ void ahci_command_verify(AHCIQState *ahci, AHCICommand
*cmd)
uint8_t slot = cmd->slot;
uint8_t port = cmd->port;
- ahci_port_check_error(ahci, port, cmd->interrupts, cmd->errors);
- ahci_port_check_interrupts(ahci, port, cmd->interrupts);
- ahci_port_check_nonbusy(ahci, port, slot);
+ ahci_port_check_nonbusy(ahci, cmd);
+ ahci_port_check_error(ahci, cmd);
+ ahci_port_check_interrupts(ahci, cmd);
ahci_port_check_cmd_sanity(ahci, cmd);
if (cmd->interrupts & AHCI_PX_IS_DHRS) {
ahci_port_check_d2h_sanity(ahci, port, slot);
diff --git a/tests/qtest/libqos/ahci.h b/tests/qtest/libqos/ahci.h
index 88835b6228..48017864bf 100644
--- a/tests/qtest/libqos/ahci.h
+++ b/tests/qtest/libqos/ahci.h
@@ -590,11 +590,9 @@ void ahci_set_command_header(AHCIQState *ahci, uint8_t
port,
void ahci_destroy_command(AHCIQState *ahci, uint8_t port, uint8_t slot);
/* AHCI sanity check routines */
-void ahci_port_check_error(AHCIQState *ahci, uint8_t port,
- uint32_t imask, uint8_t emask);
-void ahci_port_check_interrupts(AHCIQState *ahci, uint8_t port,
- uint32_t intr_mask);
-void ahci_port_check_nonbusy(AHCIQState *ahci, uint8_t port, uint8_t slot);
+void ahci_port_check_error(AHCIQState *ahci, AHCICommand *cmd);
+void ahci_port_check_interrupts(AHCIQState *ahci, AHCICommand *cmd);
+void ahci_port_check_nonbusy(AHCIQState *ahci, AHCICommand *cmd);
void ahci_port_check_d2h_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot);
void ahci_port_check_pio_sanity(AHCIQState *ahci, AHCICommand *cmd);
void ahci_port_check_cmd_sanity(AHCIQState *ahci, AHCICommand *cmd);
--
generated by git-patchbot for /home/xen/git/qemu-xen.git#staging-4.19
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |