[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[qemu-xen staging-4.19] hw/i2c/aspeed: Fix TXBUF transmission start position error



commit c2ec46c694a176a2ced6d8b62f0ec40569f4a83d
Author:     Hang Yu <francis_yuu@xxxxxxxxxxxxxx>
AuthorDate: Sat Aug 12 14:52:29 2023 +0800
Commit:     Michael Tokarev <mjt@xxxxxxxxxx>
CommitDate: Sun Sep 10 19:40:11 2023 +0300

    hw/i2c/aspeed: Fix TXBUF transmission start position error
    
    According to the ast2600 datasheet and the linux aspeed i2c driver,
    the TXBUF transmission start position should be TXBUF[0] instead
    of TXBUF[1],so the arg pool_start is useless,and the address is not
    included in TXBUF.So even if Tx Count equals zero,there is at least
    1 byte data needs to be transmitted,and M_TX_CMD should not be cleared
    at this condition.The driver url is:
    
https://github.com/AspeedTech-BMC/linux/blob/aspeed-master-v5.15/drivers/i2c/busses/i2c-ast2600.c
    
    Signed-off-by: Hang Yu <francis_yuu@xxxxxxxxxxxxxx>
    Fixes: 6054fc73e8f4 ("aspeed/i2c: Add support for pool buffer transfers")
    Reviewed-by: Cédric Le Goater <clg@xxxxxxxx>
    Signed-off-by: Cédric Le Goater <clg@xxxxxxxx>
    (cherry picked from commit 961faf3ddbd8ffcdf776bbcf88af0bc97218114a)
    Signed-off-by: Michael Tokarev <mjt@xxxxxxxxxx>
---
 hw/i2c/aspeed_i2c.c | 30 ++++++------------------------
 1 file changed, 6 insertions(+), 24 deletions(-)

diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index e485d8bfb8..44905d7899 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -226,7 +226,7 @@ static int aspeed_i2c_dma_read(AspeedI2CBus *bus, uint8_t 
*data)
     return 0;
 }
 
-static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start)
+static int aspeed_i2c_bus_send(AspeedI2CBus *bus)
 {
     AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller);
     int ret = -1;
@@ -239,7 +239,7 @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t 
pool_start)
                                                 TX_COUNT) + 1;
 
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
-        for (i = pool_start; i < pool_tx_count; i++) {
+        for (i = 0; i < pool_tx_count; i++) {
             uint8_t *pool_base = aic->bus_pool_base(bus);
 
             trace_aspeed_i2c_bus_send("BUF", i + 1, pool_tx_count,
@@ -273,7 +273,7 @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t 
pool_start)
         }
         SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, TX_DMA_EN, 0);
     } else {
-        trace_aspeed_i2c_bus_send("BYTE", pool_start, 1,
+        trace_aspeed_i2c_bus_send("BYTE", 0, 1,
                                   bus->regs[reg_byte_buf]);
         ret = i2c_send(bus->bus, bus->regs[reg_byte_buf]);
     }
@@ -446,10 +446,8 @@ static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus)
  */
 static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value)
 {
-    uint8_t pool_start = 0;
     uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus);
     uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus);
-    uint32_t reg_pool_ctrl = aspeed_i2c_bus_pool_ctrl_offset(bus);
     uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
 
     if (!aspeed_i2c_check_sram(bus)) {
@@ -483,27 +481,11 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, 
uint64_t value)
 
         SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_START_CMD, 0);
 
-        /*
-         * The START command is also a TX command, as the slave
-         * address is sent on the bus. Drop the TX flag if nothing
-         * else needs to be sent in this sequence.
-         */
-        if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
-            if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT)
-                == 0) {
-                SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
-            } else {
-                /*
-                 * Increase the start index in the TX pool buffer to
-                 * skip the address byte.
-                 */
-                pool_start++;
-            }
-        } else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN)) {
+        if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN)) {
             if (bus->regs[reg_dma_len] == 0) {
                 SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
             }
-        } else {
+        } else if (!SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
             SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
         }
 
@@ -520,7 +502,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, 
uint64_t value)
 
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_TX_CMD)) {
         aspeed_i2c_set_state(bus, I2CD_MTXD);
-        if (aspeed_i2c_bus_send(bus, pool_start)) {
+        if (aspeed_i2c_bus_send(bus)) {
             SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, TX_NAK, 1);
             i2c_end_transfer(bus->bus);
         } else {
--
generated by git-patchbot for /home/xen/git/qemu-xen.git#staging-4.19



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.