[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [qemu-xen staging-4.18] hw/i2c/aspeed: Fix TXBUF transmission start position error
commit c2ec46c694a176a2ced6d8b62f0ec40569f4a83d Author: Hang Yu <francis_yuu@xxxxxxxxxxxxxx> AuthorDate: Sat Aug 12 14:52:29 2023 +0800 Commit: Michael Tokarev <mjt@xxxxxxxxxx> CommitDate: Sun Sep 10 19:40:11 2023 +0300 hw/i2c/aspeed: Fix TXBUF transmission start position error According to the ast2600 datasheet and the linux aspeed i2c driver, the TXBUF transmission start position should be TXBUF[0] instead of TXBUF[1],so the arg pool_start is useless,and the address is not included in TXBUF.So even if Tx Count equals zero,there is at least 1 byte data needs to be transmitted,and M_TX_CMD should not be cleared at this condition.The driver url is: https://github.com/AspeedTech-BMC/linux/blob/aspeed-master-v5.15/drivers/i2c/busses/i2c-ast2600.c Signed-off-by: Hang Yu <francis_yuu@xxxxxxxxxxxxxx> Fixes: 6054fc73e8f4 ("aspeed/i2c: Add support for pool buffer transfers") Reviewed-by: Cédric Le Goater <clg@xxxxxxxx> Signed-off-by: Cédric Le Goater <clg@xxxxxxxx> (cherry picked from commit 961faf3ddbd8ffcdf776bbcf88af0bc97218114a) Signed-off-by: Michael Tokarev <mjt@xxxxxxxxxx> --- hw/i2c/aspeed_i2c.c | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index e485d8bfb8..44905d7899 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -226,7 +226,7 @@ static int aspeed_i2c_dma_read(AspeedI2CBus *bus, uint8_t *data) return 0; } -static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) +static int aspeed_i2c_bus_send(AspeedI2CBus *bus) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); int ret = -1; @@ -239,7 +239,7 @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) TX_COUNT) + 1; if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) { - for (i = pool_start; i < pool_tx_count; i++) { + for (i = 0; i < pool_tx_count; i++) { uint8_t *pool_base = aic->bus_pool_base(bus); trace_aspeed_i2c_bus_send("BUF", i + 1, pool_tx_count, @@ -273,7 +273,7 @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) } SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, TX_DMA_EN, 0); } else { - trace_aspeed_i2c_bus_send("BYTE", pool_start, 1, + trace_aspeed_i2c_bus_send("BYTE", 0, 1, bus->regs[reg_byte_buf]); ret = i2c_send(bus->bus, bus->regs[reg_byte_buf]); } @@ -446,10 +446,8 @@ static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus) */ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { - uint8_t pool_start = 0; uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus); uint32_t reg_cmd = aspeed_i2c_bus_cmd_offset(bus); - uint32_t reg_pool_ctrl = aspeed_i2c_bus_pool_ctrl_offset(bus); uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus); if (!aspeed_i2c_check_sram(bus)) { @@ -483,27 +481,11 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_START_CMD, 0); - /* - * The START command is also a TX command, as the slave - * address is sent on the bus. Drop the TX flag if nothing - * else needs to be sent in this sequence. - */ - if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) { - if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT) - == 0) { - SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0); - } else { - /* - * Increase the start index in the TX pool buffer to - * skip the address byte. - */ - pool_start++; - } - } else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN)) { + if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_DMA_EN)) { if (bus->regs[reg_dma_len] == 0) { SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0); } - } else { + } else if (!SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) { SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0); } @@ -520,7 +502,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, M_TX_CMD)) { aspeed_i2c_set_state(bus, I2CD_MTXD); - if (aspeed_i2c_bus_send(bus, pool_start)) { + if (aspeed_i2c_bus_send(bus)) { SHARED_ARRAY_FIELD_DP32(bus->regs, reg_intr_sts, TX_NAK, 1); i2c_end_transfer(bus->bus); } else { -- generated by git-patchbot for /home/xen/git/qemu-xen.git#staging-4.18
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |