[xen stable-4.19] x86/io-apic: fix directed EOI when using AMD-Vi interrupt remapping

[patchbot@xxxxxxx]

commit c86ec8e156db497c674a3a8d40cbcec8c3f68629
Author:     Roger Pau Monné <roger.pau@xxxxxxxxxx>
AuthorDate: Tue Nov 12 13:42:16 2024 +0100
Commit:     Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Tue Nov 12 13:42:16 2024 +0100

    x86/io-apic: fix directed EOI when using AMD-Vi interrupt remapping
    
    When using AMD-Vi interrupt remapping the vector field in the IO-APIC RTE is
    repurposed to contain part of the offset into the remapping table.  
Previous to
    2ca9fbd739b8 Xen had logic so that the offset into the interrupt remapping
    table would match the vector.  Such logic was mandatory for end of 
interrupt to
    work, since the vector field (even when not containing a vector) is used by 
the
    IO-APIC to find for which pin the EOI must be performed.
    
    A simple solution wold be to read the IO-APIC RTE each time an EOI is to be
    performed, so the raw value of the vector field can be obtained.  However
    that's likely to perform poorly.  Instead introduce a cache to store the
    EOI handles when using interrupt remapping, so that the IO-APIC driver can
    translate pins into EOI handles without having to read the IO-APIC RTE 
entry.
    Note that to simplify the logic such cache is used unconditionally when
    interrupt remapping is enabled, even if strictly it would only be required
    for AMD-Vi.
    
    Reported-by: Willi Junga <xenproject@xxxxxx>
    Suggested-by: David Woodhouse <dwmw@xxxxxxxxxxxx>
    Fixes: 2ca9fbd739b8 ('AMD IOMMU: allocate IRTE entries instead of using a 
static mapping')
    Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
    Tested-by: Marek Marczykowski-Górecki <marmarek@xxxxxxxxxxxxxxxxxxxxxx>
    Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
    master commit: 86001b3970fea4536048607ea6e12541736c48e1
    master date: 2024-11-05 10:36:53 +0000
---
 xen/arch/x86/io_apic.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 70 insertions(+), 5 deletions(-)

diff --git a/xen/arch/x86/io_apic.c b/xen/arch/x86/io_apic.c
index d2a313c4ac..44bfb3de8e 100644
--- a/xen/arch/x86/io_apic.c
+++ b/xen/arch/x86/io_apic.c
@@ -71,6 +71,24 @@ static int apic_pin_2_gsi_irq(int apic, int pin);
 
 static vmask_t *__read_mostly vector_map[MAX_IO_APICS];
 
+/*
+ * Store the EOI handle when using interrupt remapping.
+ *
+ * If using AMD-Vi interrupt remapping the IO-APIC redirection entry remapped
+ * format repurposes the vector field to store the offset into the Interrupt
+ * Remap table.  This breaks directed EOI, as the CPU vector no longer matches
+ * the contents of the RTE vector field.  Add a translation cache so that
+ * directed EOI uses the value in the RTE vector field when interrupt remapping
+ * is enabled.
+ *
+ * Intel VT-d Xen code still stores the CPU vector in the RTE vector field when
+ * using the remapped format, but use the translation cache uniformly in order
+ * to avoid extra logic to differentiate between VT-d and AMD-Vi.
+ *
+ * The matrix is accessed as [#io-apic][#pin].
+ */
+static uint8_t **__ro_after_init io_apic_pin_eoi;
+
 static void share_vector_maps(unsigned int src, unsigned int dst)
 {
     unsigned int pin;
@@ -273,6 +291,17 @@ void __ioapic_write_entry(
     {
         __io_apic_write(apic, 0x11 + 2 * pin, eu.w2);
         __io_apic_write(apic, 0x10 + 2 * pin, eu.w1);
+        /*
+         * Might be called before io_apic_pin_eoi is allocated.  Entry will be
+         * initialized to the RTE value once the cache is allocated.
+         *
+         * The vector field is only cached for raw RTE writes when using IR.
+         * In that case the vector field might have been repurposed to store
+         * something different than the CPU vector, and hence need to be cached
+         * for performing EOI.
+         */
+        if ( io_apic_pin_eoi )
+            io_apic_pin_eoi[apic][pin] = e.vector;
     }
     else
         iommu_update_ire_from_apic(apic, pin, e.raw);
@@ -288,18 +317,36 @@ static void ioapic_write_entry(
     spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-/* EOI an IO-APIC entry.  Vector may be -1, indicating that it should be
+/*
+ * EOI an IO-APIC entry.  Vector may be -1, indicating that it should be
  * worked out using the pin.  This function expects that the ioapic_lock is
  * being held, and interrupts are disabled (or there is a good reason not
  * to), and that if both pin and vector are passed, that they refer to the
- * same redirection entry in the IO-APIC. */
+ * same redirection entry in the IO-APIC.
+ *
+ * If using Interrupt Remapping the vector is always ignored because the RTE
+ * remapping format might have repurposed the vector field and a cached value
+ * of the EOI handle to use is obtained based on the provided apic and pin
+ * values.
+ */
 static void __io_apic_eoi(unsigned int apic, unsigned int vector, unsigned int 
pin)
 {
     /* Prefer the use of the EOI register if available */
     if ( ioapic_has_eoi_reg(apic) )
     {
-        /* If vector is unknown, read it from the IO-APIC */
-        if ( vector == IRQ_VECTOR_UNASSIGNED )
+        if ( io_apic_pin_eoi )
+            /*
+             * If the EOI handle is cached use it. When using AMD-Vi IR the CPU
+             * vector no longer matches the vector field in the RTE, because
+             * the RTE remapping format repurposes the field.
+             *
+             * The value in the RTE vector field must always be used to signal
+             * which RTE to EOI, hence use the cached value which always
+             * mirrors the contents of the raw RTE vector field.
+             */
+            vector = io_apic_pin_eoi[apic][pin];
+        else if ( vector == IRQ_VECTOR_UNASSIGNED )
+             /* If vector is unknown, read it from the IO-APIC */
             vector = __ioapic_read_entry(apic, pin, true).vector;
 
         *(IO_APIC_BASE(apic)+16) = vector;
@@ -1298,12 +1345,30 @@ void __init enable_IO_APIC(void)
             vector_map[apic] = vector_map[0];
     }
 
+    if ( iommu_intremap != iommu_intremap_off )
+    {
+        io_apic_pin_eoi = xmalloc_array(typeof(*io_apic_pin_eoi), nr_ioapics);
+        BUG_ON(!io_apic_pin_eoi);
+    }
+
     for(apic = 0; apic < nr_ioapics; apic++) {
         int pin;
-        /* See if any of the pins is in ExtINT mode */
+
+        if ( io_apic_pin_eoi )
+        {
+            io_apic_pin_eoi[apic] = xmalloc_array(typeof(**io_apic_pin_eoi),
+                                                  nr_ioapic_entries[apic]);
+            BUG_ON(!io_apic_pin_eoi[apic]);
+        }
+
+        /* See if any of the pins is in ExtINT mode and cache EOI handle */
         for (pin = 0; pin < nr_ioapic_entries[apic]; pin++) {
             struct IO_APIC_route_entry entry = ioapic_read_entry(apic, pin, 
false);
 
+            if ( io_apic_pin_eoi )
+                io_apic_pin_eoi[apic][pin] =
+                    ioapic_read_entry(apic, pin, true).vector;
+
             /* If the interrupt line is enabled and in ExtInt mode
              * I have found the pin where the i8259 is connected.
              */
--
generated by git-patchbot for /home/xen/git/xen.git#stable-4.19