|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen master] xen/riscv: imsic_init() implementation
commit c9bd8b322ecbb486bc4487ee54c260ace9965f25
Author: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
AuthorDate: Wed Jul 9 10:57:15 2025 +0200
Commit: Jan Beulich <jbeulich@xxxxxxxx>
CommitDate: Wed Jul 9 10:57:15 2025 +0200
xen/riscv: imsic_init() implementation
imsic_init() is introduced to parse device tree node, which has the
following
bindings [2], and based on the parsed information update IMSIC configuration
which is stored in imsic_cfg.
The following helpers are introduces for imsic_init() usage:
- imsic_parse_node() parses IMSIC node from DTS
- imsic_get_parent_hartid() returns the hart ( CPU ) ID of the given
device
tree node.
This patch is based on the code from [1].
Since Microchip originally developed imsic.{c,h}, an internal discussion
with
them led to the decision to use the MIT license.
[1]
https://gitlab.com/xen-project/people/olkur/xen/-/commit/0b1a94f2bc3bb1a81cd26bb75f0bf578f84cb4d4
[2]
https://elixir.bootlin.com/linux/v6.12/source/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
Co-developed-by: Romain Caritey <Romain.Caritey@xxxxxxxxxxxxx>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
---
xen/arch/riscv/Makefile | 1 +
xen/arch/riscv/imsic.c | 369 +++++++++++++++++++++++++++++++++++++
xen/arch/riscv/include/asm/imsic.h | 55 ++++++
xen/arch/riscv/include/asm/smp.h | 13 ++
4 files changed, 438 insertions(+)
diff --git a/xen/arch/riscv/Makefile b/xen/arch/riscv/Makefile
index a1c145c506..e2b8aa42c8 100644
--- a/xen/arch/riscv/Makefile
+++ b/xen/arch/riscv/Makefile
@@ -2,6 +2,7 @@ obj-y += aplic.o
obj-y += cpufeature.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += entry.o
+obj-y += imsic.o
obj-y += intc.o
obj-y += irq.o
obj-y += mm.o
diff --git a/xen/arch/riscv/imsic.c b/xen/arch/riscv/imsic.c
new file mode 100644
index 0000000000..63f4233035
--- /dev/null
+++ b/xen/arch/riscv/imsic.c
@@ -0,0 +1,369 @@
+/* SPDX-License-Identifier: MIT */
+
+/*
+ * xen/arch/riscv/imsic.c
+ *
+ * RISC-V Incoming MSI Controller support
+ *
+ * (c) Microchip Technology Inc.
+ * (c) Vates
+ */
+
+#include <xen/bitops.h>
+#include <xen/const.h>
+#include <xen/cpumask.h>
+#include <xen/device_tree.h>
+#include <xen/errno.h>
+#include <xen/init.h>
+#include <xen/macros.h>
+#include <xen/smp.h>
+#include <xen/spinlock.h>
+#include <xen/xvmalloc.h>
+
+#include <asm/imsic.h>
+
+#define IMSIC_HART_SIZE(guest_bits) (BIT(guest_bits, U) * IMSIC_MMIO_PAGE_SZ)
+
+struct imsic_mmios {
+ paddr_t base_addr;
+ unsigned long size;
+};
+
+static struct imsic_config imsic_cfg;
+
+/* Callers aren't intended to changed imsic_cfg so return const. */
+const struct imsic_config *imsic_get_config(void)
+{
+ return &imsic_cfg;
+}
+
+static int __init imsic_get_parent_hartid(const struct dt_device_node *node,
+ unsigned int index,
+ unsigned long *hartid)
+{
+ int res;
+ struct dt_phandle_args args;
+
+ res = dt_parse_phandle_with_args(node, "interrupts-extended",
+ "#interrupt-cells", index, &args);
+ if ( !res )
+ res = dt_processor_hartid(args.np->parent, hartid);
+
+ return res;
+}
+
+/*
+ * Parses IMSIC DT node.
+ *
+ * Returns 0 if initialization is successful, a negative value on failure,
+ * or IRQ_M_EXT if the IMSIC node corresponds to a machine-mode IMSIC,
+ * which should be ignored by the hypervisor.
+ */
+static int imsic_parse_node(const struct dt_device_node *node,
+ unsigned int *nr_parent_irqs,
+ unsigned int *nr_mmios)
+{
+ int rc;
+ unsigned int tmp;
+ paddr_t base_addr;
+ uint32_t *irq_range;
+
+ *nr_parent_irqs = dt_number_of_irq(node);
+ if ( !*nr_parent_irqs )
+ panic("%s: irq_num can't be 0. Check %s node\n", __func__,
+ dt_node_full_name(node));
+
+ irq_range = xvzalloc_array(uint32_t, *nr_parent_irqs * 2);
+ if ( !irq_range )
+ panic("%s: irq_range[] allocation failed\n", __func__);
+
+ if ( (rc = dt_property_read_u32_array(node, "interrupts-extended",
+ irq_range, *nr_parent_irqs * 2)) )
+ panic("%s: unable to find interrupt-extended in %s node: %d\n",
+ __func__, dt_node_full_name(node), rc);
+
+ /* Check that interrupts-extended property is well-formed. */
+ for ( unsigned int i = 2; i < (*nr_parent_irqs * 2); i += 2 )
+ {
+ if ( irq_range[i + 1] != irq_range[1] )
+ panic("%s: mode[%u] != %u\n", __func__, i + 1, irq_range[1]);
+ }
+
+ if ( irq_range[1] == IRQ_M_EXT )
+ {
+ /* Machine mode imsic node, ignore it. */
+ xvfree(irq_range);
+
+ return IRQ_M_EXT;
+ }
+
+ xvfree(irq_range);
+
+ if ( !dt_property_read_u32(node, "riscv,guest-index-bits",
+ &imsic_cfg.guest_index_bits) )
+ imsic_cfg.guest_index_bits = 0;
+ tmp = BITS_PER_LONG - IMSIC_MMIO_PAGE_SHIFT;
+ if ( tmp < imsic_cfg.guest_index_bits )
+ {
+ printk(XENLOG_ERR "%s: guest index bits too big\n",
+ dt_node_name(node));
+ return -ENOENT;
+ }
+
+ /* Find number of HART index bits */
+ if ( !dt_property_read_u32(node, "riscv,hart-index-bits",
+ &imsic_cfg.hart_index_bits) )
+ /* Assume default value */
+ imsic_cfg.hart_index_bits = fls(*nr_parent_irqs - 1);
+ tmp -= imsic_cfg.guest_index_bits;
+ if ( tmp < imsic_cfg.hart_index_bits )
+ {
+ printk(XENLOG_ERR "%s: HART index bits too big\n",
+ dt_node_name(node));
+ return -ENOENT;
+ }
+
+ /* Find number of group index bits */
+ if ( !dt_property_read_u32(node, "riscv,group-index-bits",
+ &imsic_cfg.group_index_bits) )
+ imsic_cfg.group_index_bits = 0;
+ tmp -= imsic_cfg.hart_index_bits;
+ if ( tmp < imsic_cfg.group_index_bits )
+ {
+ printk(XENLOG_ERR "%s: group index bits too big\n",
+ dt_node_name(node));
+ return -ENOENT;
+ }
+
+ /* Find first bit position of group index */
+ tmp = IMSIC_MMIO_PAGE_SHIFT * 2;
+ if ( !dt_property_read_u32(node, "riscv,group-index-shift",
+ &imsic_cfg.group_index_shift) )
+ imsic_cfg.group_index_shift = tmp;
+ if ( imsic_cfg.group_index_shift < tmp )
+ {
+ printk(XENLOG_ERR "%s: group index shift too small\n",
+ dt_node_name(node));
+ return -ENOENT;
+ }
+ tmp = imsic_cfg.group_index_bits + imsic_cfg.group_index_shift - 1;
+ if ( tmp >= BITS_PER_LONG )
+ {
+ printk(XENLOG_ERR "%s: group index shift too big\n",
+ dt_node_name(node));
+ return -ENOENT;
+ }
+
+ /* Find number of interrupt identities */
+ if ( !dt_property_read_u32(node, "riscv,num-ids", &imsic_cfg.nr_ids) )
+ {
+ printk(XENLOG_ERR "%s: number of interrupt identities not found\n",
+ node->name);
+ return -ENOENT;
+ }
+
+ if ( (imsic_cfg.nr_ids < IMSIC_MIN_ID) ||
+ (imsic_cfg.nr_ids > IMSIC_MAX_ID) )
+ {
+ printk(XENLOG_ERR "%s: invalid number of interrupt identities\n",
+ node->name);
+ return -ENOENT;
+ }
+
+ /* Compute base address */
+ *nr_mmios = 0;
+ rc = dt_device_get_address(node, *nr_mmios, &base_addr, NULL);
+ if ( rc )
+ {
+ printk(XENLOG_ERR "%s: first MMIO resource not found: %d\n",
+ dt_node_name(node), rc);
+ return rc;
+ }
+
+ imsic_cfg.base_addr = base_addr;
+ imsic_cfg.base_addr &= ~(BIT(imsic_cfg.guest_index_bits +
+ imsic_cfg.hart_index_bits +
+ IMSIC_MMIO_PAGE_SHIFT, UL) - 1);
+ imsic_cfg.base_addr &= ~((BIT(imsic_cfg.group_index_bits, UL) - 1) <<
+ imsic_cfg.group_index_shift);
+
+ /* Find number of MMIO register sets */
+ do {
+ ++*nr_mmios;
+ } while ( !dt_device_get_address(node, *nr_mmios, &base_addr, NULL) );
+
+ return 0;
+}
+
+/*
+ * Initialize the imsic_cfg structure based on the IMSIC DT node.
+ *
+ * Returns 0 if initialization is successful, a negative value on failure,
+ * or IRQ_M_EXT if the IMSIC node corresponds to a machine-mode IMSIC,
+ * which should be ignored by the hypervisor.
+ */
+int __init imsic_init(const struct dt_device_node *node)
+{
+ int rc;
+ unsigned long reloff, hartid;
+ unsigned int nr_parent_irqs, index, nr_handlers = 0;
+ paddr_t base_addr;
+ unsigned int nr_mmios;
+ struct imsic_mmios *mmios;
+ struct imsic_msi *msi = NULL;
+
+ /* Parse IMSIC node */
+ rc = imsic_parse_node(node, &nr_parent_irqs, &nr_mmios);
+ /*
+ * If machine mode imsic node => ignore it.
+ * If rc < 0 => parsing of IMSIC DT node failed.
+ */
+ if ( (rc == IRQ_M_EXT) || (rc < 0) )
+ return rc;
+
+ /* Allocate MMIO resource array */
+ mmios = xvzalloc_array(struct imsic_mmios, nr_mmios);
+ if ( !mmios )
+ {
+ rc = -ENOMEM;
+ goto imsic_init_err;
+ }
+
+ msi = xvzalloc_array(struct imsic_msi, nr_parent_irqs);
+ if ( !msi )
+ {
+ rc = -ENOMEM;
+ goto imsic_init_err;
+ }
+
+ /* Check MMIO register sets */
+ for ( unsigned int i = 0; i < nr_mmios; i++ )
+ {
+ unsigned int guest_bits = imsic_cfg.guest_index_bits;
+ unsigned long expected_mmio_size =
+ IMSIC_HART_SIZE(guest_bits) * nr_parent_irqs;
+
+ rc = dt_device_get_address(node, i, &mmios[i].base_addr,
+ &mmios[i].size);
+ if ( rc )
+ {
+ printk(XENLOG_ERR "%s: unable to parse MMIO regset %u\n",
+ node->name, i);
+ goto imsic_init_err;
+ }
+
+ base_addr = mmios[i].base_addr;
+ base_addr &= ~(BIT(guest_bits +
+ imsic_cfg.hart_index_bits +
+ IMSIC_MMIO_PAGE_SHIFT, UL) - 1);
+ base_addr &= ~((BIT(imsic_cfg.group_index_bits, UL) - 1) <<
+ imsic_cfg.group_index_shift);
+ if ( base_addr != imsic_cfg.base_addr )
+ {
+ rc = -EINVAL;
+ printk(XENLOG_ERR "%s: address mismatch for regset %u\n",
+ node->name, i);
+ goto imsic_init_err;
+ }
+
+ if ( mmios[i].size != expected_mmio_size )
+ {
+ rc = -EINVAL;
+ printk(XENLOG_ERR "%s: IMSIC MMIO size is incorrect %ld, expected
MMIO size: %ld\n",
+ node->name, mmios[i].size, expected_mmio_size);
+ goto imsic_init_err;
+ }
+ }
+
+ /* Configure handlers for target CPUs */
+ for ( unsigned int i = 0; i < nr_parent_irqs; i++ )
+ {
+ unsigned int cpu;
+
+ rc = imsic_get_parent_hartid(node, i, &hartid);
+ if ( rc )
+ {
+ printk(XENLOG_WARNING "%s: cpu ID for parent irq%u not found\n",
+ node->name, i);
+ continue;
+ }
+
+ cpu = hartid_to_cpuid(hartid);
+
+ /*
+ * If .base_addr is not 0, it indicates that the CPU has already been
+ * found.
+ * In this case, skip re-initialization to avoid duplicate setup.
+ * Also, print a warning message to signal that the DTS should be
+ * reviewed for possible duplication.
+ */
+ if ( msi[cpu].base_addr )
+ {
+ printk("%s: cpu%u is found twice in interrupts-extended prop\n",
+ node->name, cpu);
+ continue;
+ }
+
+ if ( cpu >= num_possible_cpus() )
+ {
+ printk(XENLOG_WARNING "%s: unsupported hart ID=%#lx for parent
irq%u\n",
+ node->name, hartid, i);
+ continue;
+ }
+
+ /* Find MMIO location of MSI page */
+ reloff = i * IMSIC_HART_SIZE(imsic_cfg.guest_index_bits);
+ for ( index = 0; index < nr_mmios; index++ )
+ {
+ if ( reloff < mmios[index].size )
+ break;
+
+ /*
+ * MMIO region size may not be aligned to
+ * IMSIC_HART_SIZE(guest_index_bits) if
+ * holes are present.
+ */
+ reloff -= ROUNDUP(mmios[index].size,
+ IMSIC_HART_SIZE(imsic_cfg.guest_index_bits));
+ }
+
+ if ( index == nr_mmios )
+ {
+ printk(XENLOG_WARNING "%s: MMIO not found for parent irq%u\n",
+ node->name, i);
+ continue;
+ }
+
+ if ( !IS_ALIGNED(mmios[cpu].base_addr + reloff,
+ IMSIC_MMIO_PAGE_SZ) )
+ {
+ printk(XENLOG_WARNING "%s: MMIO address %#lx is not aligned on a
page\n",
+ node->name, msi[cpu].base_addr + reloff);
+ continue;
+ }
+
+ msi[cpu].base_addr = mmios[index].base_addr;
+ msi[cpu].offset = reloff;
+
+ nr_handlers++;
+ }
+
+ if ( !nr_handlers )
+ {
+ printk(XENLOG_ERR "%s: No CPU handlers found\n", node->name);
+ rc = -ENODEV;
+ goto imsic_init_err;
+ }
+
+ imsic_cfg.msi = msi;
+
+ xvfree(mmios);
+
+ return 0;
+
+ imsic_init_err:
+ xvfree(mmios);
+ xvfree(msi);
+
+ return rc;
+}
diff --git a/xen/arch/riscv/include/asm/imsic.h
b/xen/arch/riscv/include/asm/imsic.h
new file mode 100644
index 0000000000..9cd12365b1
--- /dev/null
+++ b/xen/arch/riscv/include/asm/imsic.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: MIT */
+
+/*
+ * xen/arch/riscv/include/asm/imsic.h
+ *
+ * RISC-V Incoming MSI Controller support
+ *
+ * (c) Microchip Technology Inc.
+ */
+
+#ifndef ASM_RISCV_IMSIC_H
+#define ASM_RISCV_IMSIC_H
+
+#include <xen/types.h>
+
+#define IMSIC_MMIO_PAGE_SHIFT 12
+#define IMSIC_MMIO_PAGE_SZ (1UL << IMSIC_MMIO_PAGE_SHIFT)
+
+#define IMSIC_MIN_ID 63
+#define IMSIC_MAX_ID 2047
+
+struct imsic_msi {
+ paddr_t base_addr;
+ unsigned long offset;
+};
+
+struct imsic_config {
+ /* Base address */
+ paddr_t base_addr;
+
+ /* Bits representing Guest index, HART index, and Group index */
+ unsigned int guest_index_bits;
+ unsigned int hart_index_bits;
+ unsigned int group_index_bits;
+ unsigned int group_index_shift;
+
+ /* IMSIC phandle */
+ unsigned int phandle;
+
+ /* Number of parent irq */
+ unsigned int nr_parent_irqs;
+
+ /* Number off interrupt identities */
+ unsigned int nr_ids;
+
+ /* MSI */
+ const struct imsic_msi *msi;
+};
+
+struct dt_device_node;
+int imsic_init(const struct dt_device_node *node);
+
+const struct imsic_config *imsic_get_config(void);
+
+#endif /* ASM_RISCV_IMSIC_H */
diff --git a/xen/arch/riscv/include/asm/smp.h b/xen/arch/riscv/include/asm/smp.h
index eb58b6576b..5dbacf1f9d 100644
--- a/xen/arch/riscv/include/asm/smp.h
+++ b/xen/arch/riscv/include/asm/smp.h
@@ -3,6 +3,7 @@
#define ASM__RISCV__SMP_H
#include <xen/cpumask.h>
+#include <xen/macros.h>
#include <xen/percpu.h>
#include <asm/current.h>
@@ -18,6 +19,18 @@ static inline unsigned long cpuid_to_hartid(unsigned long
cpuid)
return pcpu_info[cpuid].hart_id;
}
+static inline unsigned int hartid_to_cpuid(unsigned long hartid)
+{
+ for ( unsigned int cpu = 0; cpu < ARRAY_SIZE(pcpu_info); cpu++ )
+ {
+ if ( hartid == cpuid_to_hartid(cpu) )
+ return cpu;
+ }
+
+ /* hartid isn't valid for some reason */
+ return NR_CPUS;
+}
+
static inline void set_cpuid_to_hartid(unsigned long cpuid,
unsigned long hartid)
{
--
generated by git-patchbot for /home/xen/git/xen.git#master
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |