|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen master] xen/arm: domain_build.c: Use hwdom instead of dom0 where applicable
commit 65a22113b966e813101ba0bc96ae88d835589fb1
Author: Michal Orzel <michal.orzel@xxxxxxx>
AuthorDate: Tue Nov 3 17:46:24 2026 +0100
Commit: Michal Orzel <michal.orzel@xxxxxxx>
CommitDate: Wed Nov 4 17:13:57 2026 +0100
xen/arm: domain_build.c: Use hwdom instead of dom0 where applicable
Since commit 52cb53f1816a ("xen/arm: dom0less hwdom construction"),
construct_hwdom() and the helpers it relies on (allocate_memory_11(),
prepare_dtb_hwdom(), handle_node(), find_gnttab_region(), etc.) are used
not only for the regular dom0 but also for a hardware domain created by
dom0less. Many comments and names on this path still refer to dom0, which
is misleading.
No functional change other than the panic messages.
Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx>
Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>
---
xen/arch/arm/domain_build.c | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 1ee1f1f6a7..606e85818e 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -100,7 +100,7 @@ int __init parse_arch_dom0_param(const char *s, const char
*e)
#endif
/*
- * Amount of extra space required to dom0's device tree. This covers
+ * Amount of extra space required to hwdom's device tree. This covers
* nodes generated by Xen, which are not directly copied from the host DTB.
* It is calculated as:
* - Space for /hypervisor node (128 bytes).
@@ -111,15 +111,15 @@ int __init parse_arch_dom0_param(const char *s, const
char *e)
* plus the appendage to the main /memory node (NR_SHMEM_BANKS * (160 + 16)
* bytes). This overhead is dropped when CONFIG_STATIC_SHM is disabled.
*/
-#define DOM0_FDT_EXTRA_SIZE (128 + sizeof(struct fdt_reserve_entry) + \
- (NR_MEM_BANKS * 16) + \
- (IS_ENABLED(CONFIG_STATIC_SHM) ? \
- (NR_SHMEM_BANKS * (160 + 16)) : 0))
+#define HWDOM_FDT_EXTRA_SIZE (128 + sizeof(struct fdt_reserve_entry) + \
+ (NR_MEM_BANKS * 16) + \
+ (IS_ENABLED(CONFIG_STATIC_SHM) ? \
+ (NR_SHMEM_BANKS * (160 + 16)) : 0))
paddr_t __init hwdom_get_fdt_alloc_size(void)
{
if ( acpi_disabled )
- return fdt_totalsize(device_tree_flattened) + DOM0_FDT_EXTRA_SIZE;
+ return fdt_totalsize(device_tree_flattened) + HWDOM_FDT_EXTRA_SIZE;
return ACPI_DOM0_FDT_MIN_SIZE;
}
@@ -175,7 +175,7 @@ static bool __init insert_11_bank(struct domain *d,
res = guest_physmap_add_page(d, _gfn(mfn_x(smfn)), smfn, order);
if ( res )
- panic("Failed map pages to DOM0: %d\n", res);
+ panic("Failed map pages to %pd: %d\n", d, res);
kinfo->unassigned_mem -= size;
@@ -245,19 +245,19 @@ fail:
*
* Requirements:
*
- * 1. The dom0 kernel should be loaded within the first 128MB of RAM. This
+ * 1. The hwdom kernel should be loaded within the first 128MB of RAM. This
* is necessary at least for Linux zImage kernels, which are all we
* support today.
- * 2. We want to put the dom0 kernel, ramdisk and DTB in the same
+ * 2. We want to put the hwdom kernel, ramdisk and DTB in the same
* bank. Partly this is just easier for us to deal with, but also
* the ramdisk and DTB must be placed within a certain proximity of
* the kernel within RAM.
- * 3. For dom0 we want to place as much of the RAM as we reasonably can
+ * 3. For hwdom we want to place as much of the RAM as we reasonably can
* below 4GB, so that it can be used by non-LPAE enabled kernels (32-bit).
- * 4. Some devices assigned to dom0 can only do 32-bit DMA access or
+ * 4. Some devices assigned to hwdom can only do 32-bit DMA access or
* even be more restricted. We want to allocate as much of the RAM
* as we reasonably can that can be accessed from all the devices..
- * 5. For 32-bit dom0 the kernel must be located below 4GB.
+ * 5. For 32-bit hwdom the kernel must be located below 4GB.
* 6. We want to have a few largers banks rather than many smaller ones.
*
* For the first two requirements we need to make sure that the lowest
@@ -293,7 +293,7 @@ fail:
* to be allocated in the low mem. Then for subsequent allocation, we
* initially allocate memory only from low mem. Once that runs out out
* (as described above) we allow higher allocations and continue until
- * that runs out (or we have allocated sufficient dom0 memory).
+ * that runs out (or we have allocated sufficient hwdom memory).
*/
static void __init allocate_memory_11(struct domain *d,
struct kernel_info *kinfo)
@@ -311,7 +311,7 @@ static void __init allocate_memory_11(struct domain *d,
unsigned int bits;
/*
- * TODO: Implement memory bank allocation when DOM0 is not direct
+ * TODO: Implement memory bank allocation when hwdom is not direct
* mapped
*/
BUG_ON(!is_domain_direct_mapped(d));
@@ -409,8 +409,8 @@ static void __init allocate_memory_11(struct domain *d,
if ( kinfo->unassigned_mem )
/* Don't want format this as PRIpaddr (16 digit hex) */
- panic("Failed to allocate requested dom0 memory. %ldMB unallocated\n",
- (unsigned long)kinfo->unassigned_mem >> 20);
+ panic("Failed to allocate requested %pd memory. %ldMB unallocated\n",
+ d, (unsigned long)kinfo->unassigned_mem >> 20);
for( i = 0; i < mem->nr_banks; i++ )
{
@@ -516,7 +516,7 @@ static int __init write_properties(struct domain *d, struct
kernel_info *kinfo,
* * remove bootargs, linux,uefi-system-table,
* linux,uefi-mmap-start, linux,uefi-mmap-size,
* linux,uefi-mmap-desc-size, and linux,uefi-mmap-desc-ver
- * (since EFI boot is not currently supported in dom0).
+ * (since EFI boot is not currently supported in hwdom).
*/
if ( dt_node_path_is_equal(node, "/chosen") )
{
@@ -1544,7 +1544,7 @@ static int __init handle_node(struct domain *d, struct
kernel_info *kinfo,
/*
* Even if the IOMMU device is not used by Xen, it should not be
- * passthrough to DOM0
+ * passthrough to hwdom.
*/
if ( device_get_class(node) == DEVICE_IOMMU )
{
@@ -1695,7 +1695,7 @@ static int __init prepare_dtb_hwdom(struct domain *d,
struct kernel_info *kinfo)
kinfo->phandle_intc = dt_interrupt_controller->phandle;
fdt = device_tree_flattened;
- new_size = fdt_totalsize(fdt) + DOM0_FDT_EXTRA_SIZE;
+ new_size = fdt_totalsize(fdt) + HWDOM_FDT_EXTRA_SIZE;
kinfo->fdt = xmalloc_bytes(new_size);
if ( kinfo->fdt == NULL )
return -ENOMEM;
@@ -1764,7 +1764,7 @@ static void __init find_gnttab_region(struct domain *d,
gnttab_resource_max_frames(d, XENMEM_resource_grant_table_id_shared);
/*
- * The region used by Xen on the memory will never be mapped in DOM0
+ * The region used by Xen on the memory will never be mapped in hwdom
* memory layout. Therefore it can be used for the grant table.
*
* Only use the text section as it's always present and will contain
@@ -1776,7 +1776,7 @@ static void __init find_gnttab_region(struct domain *d,
#ifdef CONFIG_ARM_32
/*
- * The gnttab region must be under 4GB in order to work with DOM0
+ * The gnttab region must be under 4GB in order to work with hwdom
* using short page table.
* In practice it's always the case because Xen is always located
* below 4GB, but be safe.
@@ -1941,7 +1941,7 @@ int __init construct_hwdom(struct kernel_info *kinfo,
return rc;
}
- /* Map extra GIC MMIO, irqs and other hw stuffs to dom0. */
+ /* Map extra GIC MMIO, irqs and other hw stuffs to hwdom */
rc = gic_map_hwdom_extra_mappings(d);
if ( rc < 0 )
return rc;
--
generated by git-patchbot for /home/xen/git/xen.git#master
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |