__ __ _ ____ \ \/ /___ _ __ / | |___ \ \ // _ \ '_ \ | | __) | / \ __/ | | | | |_ / __/ /_/\_\___|_| |_| |_(_)_____| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 1.2 (root@local) (gcc version 2.95.3 20010315 (release)) Mon Feb 16 10:01:46 CET 2004 Initialised all memory on a 1023MB machine Reading BIOS drive-info tables at 0xfef6f and 0xfef6f CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU caps: afebfbff 00000000 00000000 00000000 found SMP MP-table at 000f07b0 Memory Reservation 0xf07b0, 4096 bytes Memory Reservation 0xf03a0, 4096 bytes Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 I/O APIC #4 Version 17 at 0xFEC00000. I/O APIC #5 Version 17 at 0xFEC01000. I/O APIC #6 Version 17 at 0xFEC02000. Enabling APIC mode: Flat.Using 3 I/O APICs Processors: 1 Initialising domains Initialising schedulers Initializing CPU#0 Detected 2665.961 MHz processor. CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU caps: afebfbff 00000000 00000000 00000000 CPU0 booted enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 6 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 6 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 4-0, 4-3, 4-5, 4-10, 4-12, 5-0, 5-4, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 6-0, 6-1, 6-2, 6-3, 6-4, 6-5, 6-6, 6-7, 6-8, 6-9, 6-10, 6-11, 6-12, 6-13, 6-14, 6-15 not connected. ..TIMER: vector=0x41 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 16. number of IO-APIC #4 registers: 16. number of IO-APIC #5 registers: 16. number of IO-APIC #6 registers: 16. testing the IO APIC....................... IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 41 01 0FF 0F 0 0 0 0 0 1 1 49 02 001 01 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 0FF 0F 0 0 0 0 0 1 1 51 05 000 00 1 0 0 0 0 0 0 00 06 0FF 0F 0 0 0 0 0 1 1 59 07 0FF 0F 0 0 0 0 0 1 1 61 08 0FF 0F 0 0 0 0 0 1 1 69 09 0FF 0F 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 0FF 0F 1 1 0 1 0 1 1 79 0c 000 00 1 0 0 0 0 0 0 00 0d 0FF 0F 0 0 0 0 0 1 1 81 0e 0FF 0F 0 0 0 0 0 1 1 89 0f 0FF 0F 0 0 0 0 0 1 1 91 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 1 1 0 1 0 1 1 99 02 0FF 0F 1 1 0 1 0 1 1 A1 03 0FF 0F 1 1 0 1 0 1 1 A9 04 000 00 1 0 0 0 0 0 0 00 05 0FF 0F 1 1 0 1 0 1 1 B1 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 06000000 ....... : arbitration: 06 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ11 -> 0:11 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ21 -> 1:5 .................................... done. Using local APIC timer interrupts. Calibrating APIC timer for CPU0... ..... CPU speed is 2666.1966 MHz. ..... Bus speed is 133.3097 MHz. ..... bus_scale = 0x00008883 ACT: Initialising Accurate timers Time init: .... System Time: 20000540ns .... cpu_freq: 00000000:9EE759C0 .... scale: 00000001:8019FC95 .... Wall Clock: 1076922763s 0us Start schedulers PCI: PCI BIOS revision 2.10 entry at 0xf17b0, last bus=0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 PCI: Using IRQ router ServerWorks [1166/0203] at 00:0f.0 PCI->APIC IRQ transform: (B0,I3,P0) -> 18 PCI->APIC IRQ transform: (B0,I4,P0) -> 19 PCI->APIC IRQ transform: (B0,I6,P0) -> 21 PCI->APIC IRQ transform: (B0,I9,P0) -> 17 PCI->APIC IRQ transform: (B0,I15,P0) -> 11 Intel(R) PRO/1000 Network Driver - version 5.2.16 Copyright (c) 1999-2003 Intel Corporation. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:06.0: 3Com PCI 3c905C Tornado at 0xd400. Vers LK1.1.16 tg3.c:v2.3 (November 5, 2003) eth1: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:08:02:f7:c1:fa Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device 79, VID=1166, DID=0213 PCI_IDE: chipset revision 160 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio hdc: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver (1.1.2 Feb 16 2004 10:02:09) scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 Vendor: COMPAQ Model: BD03695CC8 Rev: HPB6 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) Vendor: MAXTOR Model: ATLAS10K4_36WLS Rev: DFV0 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) Vendor: MAXTOR Model: ATLAS10K4_36WLS Rev: DFV0 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:2): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) scsi0:A:0:0: Tagged Queuing enabled. Depth 253 scsi0:A:1:0: Tagged Queuing enabled. Depth 253 scsi0:A:2:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0 SCSI device sda: 71132000 512-byte hdwr sectors (36420 MB) SCSI device sdb: 71833096 512-byte hdwr sectors (36779 MB) SCSI device sdc: 71833096 512-byte hdwr sectors (36779 MB) Device eth0 opened and ready for use. DOM0: Guest OS virtual load address is c0000000 DOM0: xen_console_init DOM0: Linux version 2.4.24-xeno (root@xen) (gcc version 2.95.3 20010315 (release)) #1 Mon Feb 16 10:06:56 CET 2004 DOM0: On node 0 totalpages: 32768 DOM0: zone(0): 4096 pages. DOM0: zone(1): 28672 pages. DOM0: zone(2): 0 pages. DOM0: Kernel command line: (hd0,0)/xenolinux.gz root=/dev/sda3 console=tty0 console=xencons0 DOM0: Initializing CPU#0 DOM0: Xen reported: 2665.961 MHz processor. DOM0: Console: colour VGA+ 80x25 DOM0: Linux version 2.4.24-xeno (root@xen) (gcc version 2.95.3 20010315 (release)) #1 Mon Feb 16 10:06:56 CET 2004 DOM0: On node 0 totalpages: 32768 DOM0: zone(0): 4096 pages. DOM0: zone(1): 28672 pages. DOM0: zone(2): 0 pages. DOM0: Kernel command line: (hd0,0)/xenolinux.gz root=/dev/sda3 console=tty0 console=xencons0 DOM0: Initializing CPU#0 DOM0: Xen reported: 2665.961 MHz processor. DOM0: Console: colour VGA+ 80x25 DOM0: Calibrating delay loop... 23540.53 BogoMIPS DOM0: Memory: 127972k/131072k available (937k kernel code, 3100k reserved, 235k data, 32k init, 0k highmem) DOM0: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) DOM0: Inode cache hash table entries: 8192 (order: 4, 65536 bytes) DOM0: Mount cache hash table entries: 512 (order: 0, 4096 bytes) DOM0: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) DOM0: Page-cache hash table entries: 32768 (order: 5, 131072 bytes) DOM0: CPU: L1 I cache: 12K, L1 D cache: 8K DOM0: CPU: L2 cache: 512K DOM0: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 DOM0: POSIX conformance testing by UNIFIX DOM0: Linux NET4.0 for Linux 2.4 DOM0: Based upon Swansea University Computer Society NET3.039 DOM0: Initializing RT netlink socket DOM0: Starting kswapd DOM0: Journalled Block Device driver loaded DOM0: Xeno console successfully installed DOM0: Successfully installed virtual firewall/router interface DOM0: Starting Xeno Balloon driver DOM0: pty: 256 Unix98 ptys configured DOM0: Partition check: DOM0: sda: sda1 sda2 sda3 sda4 DOM0: sdb: sdb1 DOM0: sdc: unknown partition table DOM0: Skipping partition check on cdrom /dev/hdc DOM0: NET4: Linux TCP/IP 1.0 for NET4.0 DOM0: IP Protocols: ICMP, UDP, TCP DOM0: IP: routing cache hash table of 1024 buckets, 8Kbytes DOM0: TCP: Hash tables configured (established 8192 bind 8192) DOM0: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. DOM0: root_device_name = sda3 DOM0: kjournald starting. Commit interval 5 seconds DOM0: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal DOM0: EXT3-fs: recovery complete. DOM0: EXT3-fs: mounted filesystem with ordered data mode. DOM0: VFS: Mounted root (ext3 filesystem). DOM0: Freeing unused kernel memory: 32k freed DOM0: INIT: version 2.82 booting DOM0: System Boot Control: Running /etc/init.d/boot DOM0: Mounting /proc filesystem7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: Mounting /dev/pts7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hmodprobe: modprobe: Can't locate module block-major-9 DOM0: [m[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel DOM0: /etc/init.d/boot.d/S04boot.lvm: line 28: [: =: unary operator expected DOM0: [m[?25hActivating swap-devices in /etc/fstab... DOM0: Adding Swap: 530136k swap-space (priority 42) DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel DOM0: /etc/init.d/boot.d/S05boot.localfs: line 58: [: =: unary operator expected DOM0: Checking file systems... DOM0: fsck 1.34 (25-Jul-2003) DOM0: /dev/sda3: clean, 94267/788704 files, 367491/1574370 blocks DOM0: /dev/sda1: recovering journal DOM0: /dev/sda1: clean, 50/10040 files, 18034/40128 blocks DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hEXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal DOM0: Setting up /lib/modules/2.4.24-xeno7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: Mounting local file systems... DOM0: proc on /proc type proc (rw) DOM0: devpts on /dev/pts type devpts (rw,mode=0620,gid=5) DOM0: kjournald starting. Commit interval 5 seconds DOM0: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal DOM0: EXT3-fs: mounted filesystem with ordered data mode. DOM0: /dev/sda1 on /boot type ext3 (rw) DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25h[m[?25h[m[?25hActivating remaining swap-devices in /etc/fstab... DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hMounting shared memory FS on /dev/shm[80C[10D[1;32mdone[m DOM0: Loading required kernel modules DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hRestore device permissions7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hSetting up the CMOS clock7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hSetting up timezone data7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hSetting scheduling timeslices 7[?25l[80C[10D[1munused[m8[?25h DOM0: Setting up hostname 'xen'7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: Setting up loopback interface 7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hEnabling syn flood protection[80C[10D[1;32mdone[m DOM0: Disabling IP forwarding7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: Creating /var/log/boot.msg DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel DOM0: /etc/init.d/boot.d/S11boot.klog: line 40: test: =: unary operator expected DOM0: [m[?25hSystem Boot Control: The system has been [80C[10D[1msetup[m DOM0: Skipped features: [80C[17D[1;33mboot.sched[m DOM0: System Boot Control: Running /etc/init.d/boot.local DOM0: ip_tables: (C) 2000-2002 Netfilter core team DOM0: ip_conntrack version 2.1 (1024 buckets, 8192 max) - 292 bytes per conntrack DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hINIT: Entering runlevel: 3 DOM0: Master Resource Control: previous runlevel: N, switching to runlevel: [80C[10D[1m3[m DOM0: Initializing random number generator7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hSetting up network interfaces: DOM0: lo 7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: eth0 IP/Netmask: 10.0.0.2 / 255.255.255.0 7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hStarting syslog services7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hStarting CRON daemon7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: Starting SSH daemon7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: [m[?25hLoading keymap qwertz/croat.map.gz DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hNo bios found at: 0xc0000 DOM0: v_bios: No such file or directory DOM0: Loading compose table latin1.add7[?25l[80C[10D[1;32mdone[m8[?25h DOM0: Stop Unicode mode DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hLoading console font lat1-16.psfu -m none (B DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25h[m[?25hMaster Resource Control: runlevel 3 has been [80C[10D[1mreached[m Killing domain 1 Releasing task 1 Killing domain 2 Releasing task 2 Killing domain 3 Releasing task 3 DOM4: xen_console_init DOM4: Linux version 2.4.24-xeno (root@xen) (gcc version 2.95.3 20010315 (release)) #1 Mon Feb 16 10:06:56 CET 2004 DOM4: On node 0 totalpages: 16384 DOM4: zone(0): 4096 pages. DOM4: zone(1): 12288 pages. DOM4: zone(2): 0 pages. DOM4: Kernel command line: root=/dev/sda1 VMID=1 DOM4: Initializing CPU#0 DOM4: Xen reported: 2665.961 MHz processor. DOM4: Calibrating delay loop... 10643.04 BogoMIPS DOM4: Memory: 63276k/65536k available (937k kernel code, 2260k reserved, 235k data, 32k init, 0k highmem) DOM4: Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) DOM4: Inode cache hash table entries: 4096 (order: 3, 32768 bytes) DOM4: Mount cache hash table entries: 512 (order: 0, 4096 bytes) DOM4: Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) DOM4: Page-cache hash table entries: 16384 (order: 4, 65536 bytes) DOM4: CPU: L1 I cache: 12K, L1 D cache: 8K DOM4: CPU: L2 cache: 512K DOM4: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 DOM4: POSIX conformance testing by UNIFIX DOM4: Linux NET4.0 for Linux 2.4 DOM4: Based upon Swansea University Computer Society NET3.039 DOM4: Initializing RT netlink socket DOM4: Starting kswapd DOM4: Journalled Block Device driver loaded DOM4: Xeno console successfully installed DOM4: Starting Xeno Balloon driver DOM4: pty: 256 Unix98 ptys configured DOM4: NET4: Linux TCP/IP 1.0 for NET4.0 DOM4: IP Protocols: ICMP, UDP, TCP DOM4: IP: routing cache hash table of 512 buckets, 4Kbytes DOM4: TCP: Hash tables configured (established 4096 bind 4096) DOM4: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. DOM4: root_device_name = sda1 DOM4: kjournald starting. Commit interval 5 seconds DOM4: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal DOM4: EXT3-fs: recovery complete. DOM4: EXT3-fs: mounted filesystem with ordered data mode. DOM4: VFS: Mounted root (ext3 filesystem). DOM4: Freeing unused kernel memory: 32k freed DOM4: INIT: version 2.82 booting DOM4: System Boot Control: Running /etc/init.d/boot DOM4: Mounting /proc filesystem7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: Mounting /dev/pts7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hmodprobe: modprobe: Can't locate module block-major-9 DOM4: [m[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel DOM4: /etc/init.d/boot.d/S04boot.lvm: line 28: [: =: unary operator expected DOM4: [m[?25hActivating swap-devices in /etc/fstab... DOM4: Adding Swap: 131064k swap-space (priority 42) DOM4: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel DOM4: /etc/init.d/boot.d/S05boot.localfs: line 58: [: =: unary operator expected DOM4: Checking file systems... DOM4: fsck 1.34 (25-Jul-2003) DOM4: /dev/sda1: clean, 94221/524288 files, 359010/1048576 blocks DOM4: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hEXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal DOM4: Mounting local file systems... DOM4: proc on /proc type proc (rw) DOM4: devpts on /dev/pts type devpts (rw,mode=0620,gid=5) DOM4: nothing was mounted DOM4: 7[?25l[1A[80C[10D[1;32mdone[m8[?25h[m[?25h[m[?25hActivating remaining swap-devices in /etc/fstab... DOM4: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hMounting shared memory FS on /dev/shm[80C[10D[1;32mdone[m DOM4: Loading required kernel modules DOM4: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hRestore device permissions7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hSetting up the CMOS clockmodprobe: modprobe: Can't locate module char-major-4 DOM4: hwclock is unable to get I/O port access: the iopl(3) call failed. DOM4: modprobe: modprobe: Can't locate module char-major-4 DOM4: hwclock is unable to get I/O port access: the iopl(3) call failed. DOM4: 7[?25l[80C[10D[1;31mfailed[m8[?25h DOM4: [m[?25hSetting up timezone data7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hSetting scheduling timeslices 7[?25l[80C[10D[1munused[m8[?25h DOM4: Setting up hostname 'xen'7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: Setting up loopback interface 7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hEnabling syn flood protection[80C[10D[1;32mdone[m DOM4: Disabling IP forwarding7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: Creating /var/log/boot.msg DOM4: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel DOM4: /etc/init.d/boot.d/S11boot.klog: line 40: test: =: unary operator expected DOM4: modprobe: modprobe: Can't locate module char-major-4 DOM4: open(/dev/tty1): No such device DOM4: [m[?25hSystem Boot Control: The system has been [80C[10D[1msetup[m DOM4: Skipped features: [80C[17D[1;33mboot.sched[m DOM4: System Boot Control: Running /etc/init.d/boot.local DOM4: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hINIT: Entering runlevel: 3 DOM4: Master Resource Control: previous runlevel: N, switching to runlevel: [80C[10D[1m3[m DOM4: Initializing random number generator7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hSetting up network interfaces: DOM4: lo 7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: eth0 IP/Netmask: 10.0.0.4 / 255.255.255.0 7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hStarting syslog servicesmodprobe: modprobe: Can't locate module char-major-4 DOM4: 7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hStarting CRON daemon7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: Starting SSH daemon7[?25l[80C[10D[1;32mdone[m8[?25h DOM4: [m[?25hMaster Resource Control: runlevel 3 has been [80C[10D[1mreached[m DOM4: INIT: no more processes left in this runlevel DOM4: Kernel panic: Failed mmu update: c013eea0, 1 Killing domain 4 Releasing task 4