[1] xen_console_init
[1] Linux version 2.4.25-xeno (iap10@xxxxxxxxxxxxxxxxxxxxxx) (gcc version
3.2.2
20030222 (Red Hat Linux 3.2.2-5)) #2 Thu Mar 4 18:59:57 GMT 2004
[1] On node 0 totalpages: 4096
[1] zone(0): 4096 pages.
[1] zone(1): 0 pages.
[1] zone(2): 0 pages.
[1] Kernel command line:
ip=169.254.1.1:169.254.1.0:155.99.182.1:255.255.254.0::eth0:on
root=/dev/hda11 ro 4 VMID=1
[1] Initializing CPU#0
[1] Xen reported: 2392.066 MHz processor.
[1] Calibrating delay loop... 9542.04 BogoMIPS
[1] Memory: 14352k/16384k available (1284k kernel code, 2032k reserved,
244k data, 60k init, 0k highmem)
[1] Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
[1] Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
[1] Mount cache hash table entries: 512 (order: 0, 4096 bytes)
[1] Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
[1] Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
[1] CPU: L1 I cache: 12K, L1 D cache: 8K
[1] CPU: L2 cache: 512K
[1] CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[1] POSIX conformance testing by UNIFIX
[1] Linux NET4.0 for Linux 2.4
[1] Based upon Swansea University Computer Society NET3.039
[1] Initializing RT netlink socket
[1] Starting kswapd
[1] Journalled Block Device driver loaded
[1] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[1] Xeno console successfully installed
[1] Starting Xeno Balloon driver
[1] pty: 256 Unix98 ptys configured
[1] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[1] loop: loaded (max 8 devices)
[1] NET4: Linux TCP/IP 1.0 for NET4.0
[1] IP Protocols: ICMP, UDP, TCP
[1] IP: routing cache hash table of 512 buckets, 4Kbytes
[1] TCP: Hash tables configured (established 1024 bind 2048)
[1] IP-Config: Gateway not on directly connected network.
[1] ip_conntrack version 2.1 (128 buckets, 1024 max) - 292 bytes per
conntrack
[1] ip_tables: (C) 2000-2002 Netfilter core team
[1] NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
[1] root_device_name = hda11
[1] kjournald starting.  Commit interval 5 seconds
[1] EXT3-fs: mounted filesystem with ordered data mode.
[1] VFS: Mounted root (ext3 filesystem) readonly.
[1] Freeing unused kernel memory: 60k freed
[1] INIT: version 2.84 booting
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 39: /dev/tty1: No such device
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 39: /dev/tty2: No such device
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 39: /dev/tty3: No such device
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 39: /dev/tty4: No such device
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 39: /dev/tty5: No such device
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 39: /dev/tty6: No such device
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 43: /dev/tty7: No such device
[1] modprobe: modprobe: Can't locate module char-major-4
[1] /etc/rc.d/rc.sysinit: line 44: /dev/tty8: No such device
[1] Welcome to Red Hat Linux
[1] Press 'I' to enter interactive startup.
[1] Mounting proc filesystem:  [  OK  ]
[1] Configuring kernel parameters:  [  OK  ]
[1] modprobe: modprobe: Can't locate module char-major-10-135
[1] modprobe: modprobe: Can't locate module char-major-4
[1] hwclock is unable to get I/O port access:  the iopl(3) call failed.
[1] Setting clock  (localtime): Sat Apr 10 21:52:58 MDT 2004 [  OK  ]
[1] Setting hostname localhost.localdomain:  [  OK  ]
[1] modprobe: Can't locate module usbcore
[1] Initializing USB controller (usb-uhci):  modprobe: Can't locate module
usb-uhci
[1] [FAILED]
[1] Your system appears to have shut down uncleanly
[1] Press Y within 5 seconds to force file system integrity check...Press
Y within 4 seconds to force file system integrity check...Press Y within 3
seconds to
force file system integrity check...Press Y with
[1] k...Press Y within 1 seconds to force file system integrity check...
[1] Checking root filesystem
[1] /12: clean, 147097/768544 files, 704782/1536207 blocks
[1] [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda11
[1] [  OK  ]
[1] Remounting root filesystem in read-write mode:  [  OK  ]
[1] Activating swap partitions:  swapon: /dev/hda13: No such device or
address
[1] [FAILED]
[1] Finding module dependencies:  [  OK  ]
[1] Checking filesystems
[1] Checking all file systems.
[1] [  OK  ]
[1] Mounting local filesystems:  [  OK  ]
[1] Enabling local filesystem quotas:  [  OK  ]
[1] swapon: /dev/hda13: No such device or address
[1] Enabling swap space:  [  OK  ]
[1] INIT: Entering runlevel: 4
[1] Entering non-interactive startup
[1] Setting network parameters:  [  OK  ]
[1] Bringing up loopback interface:  [  OK  ]
[1] Bringing up interface eth0:  [  OK  ]
[1] Starting system logger: [  OK  ]
[1] Starting kernel logger: [  OK  ]
[1] Starting portmapper: [  OK  ]
[1] Starting NFS statd: [  OK  ]
[1] Initializing random number generator:  [  OK  ]
[1] Starting pcmcia:  [  OK  ]
[1] Mounting other filesystems:  [  OK  ]
[1] Starting automount: No Mountpoints Defined[  OK  ]
[1] Starting sshd:[  OK  ]
[1] Starting xinetd: [  OK  ]
[1] Starting sendmail: [  OK  ]
[1] Starting sm-client: [  OK  ]
[1] Starting crond: [  OK  ]
[1] Starting cups: [  OK  ]
[1] Starting xfs: [  OK  ]
[1] Starting anacron: [  OK  ]
[1] Starting atd: [  OK  ]
[1] INIT: no more processes left in this runlevel