[ 0.000000] Linux version 2.6.22-14-server (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 22:09:15 GMT 2007 (Ubuntu 2.6.22-14.46-server) [ 0.000000] Command line: root=/dev/disk/by-id/scsi-SATA_Hitachi_HDS7216_PVD301Z9R3DSTK-part6 resume=/dev/sda5 splash=silent showopts console=ttyS0,115200 debug verbose [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000defafe00 (usable) [ 0.000000] BIOS-e820: 00000000defafe00 - 00000000defb1ea0 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000defb1ea0 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved) [ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000011c000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 913327) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1163264) 2 entries of 3200 used [ 0.000000] end_pfn_map = 1163264 [ 0.000000] DMI 2.5 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000E5C10 checksum 0 [ 0.000000] ACPI: RSDP 000E5C10, 0014 (r0 COMPAQ) [ 0.000000] ACPI: RSDT DEFC1E40, 0044 (r1 HPQOEM SLIC-BPC 20070718 0) [ 0.000000] ACPI: FACP DEFC1EE8, 0074 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: DSDT DEFC2427, A370 (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E) [ 0.000000] ACPI: FACS DEFC1E00, 0040 [ 0.000000] ACPI: APIC DEFC1F5C, 0084 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: ASF! DEFC1FE0, 0063 (r32 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: MCFG DEFC2043, 003C (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: TCPA DEFC207F, 0032 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: SLIC DEFC20B1, 0176 (r1 HPQOEM SLIC-BPC 1 0) [ 0.000000] ACPI: HPET DEFC2227, 0038 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] ACPI: DMAR DEFC225F, 0198 (r1 COMPAQ BEARLAKE 1 0) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000011c000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 913327) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1163264) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000011c000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1163264 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 913327 [ 0.000000] 0: 1048576 -> 1163264 [ 0.000000] On node 0 totalpages: 1027918 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1245 pages reserved [ 0.000000] DMA zone: 2698 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 894951 pages, LIFO batch:31 [ 0.000000] Normal zone: 1568 pages used for memmap [ 0.000000] Normal zone: 113120 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000defaf000 - 00000000defb0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000defb0000 - 00000000defb1000 [ 0.000000] swsusp: Registered nosave memory region: 00000000defb1000 - 00000000defb2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000defb2000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f4000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f4000000 - 00000000f8000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed40000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed40000 - 00000000fed45000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fed45000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:14000000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 42120 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 1010769 [ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-SATA_Hitachi_HDS7216_PVD301Z9R3DSTK-part6 resume=/dev/sda5 splash=silent showopts console=ttyS0,115200 debug verbose [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 16.902813] time.c: Detected 2660.000 MHz processor. [ 16.903796] Console: colour VGA+ 80x25 [ 17.498583] Checking aperture... [ 17.501791] Calgary: detecting Calgary via BIOS EBDA area [ 17.507157] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 17.513906] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 17.563261] Placing software IO TLB between 0x1054000 - 0x5054000 [ 17.608387] Memory: 3973860k/4653056k available (2295k kernel code, 137812k reserved, 1238k data, 308k init) [ 17.618201] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 17.773041] Calibrating delay using timer specific routine.. 5322.89 BogoMIPS (lpj=26614494) [ 17.781457] Security Framework v1.0.0 initialized [ 17.786138] SELinux: Disabled at boot. [ 17.790206] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 17.800361] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 17.808806] Mount-cache hash table entries: 256 [ 17.813433] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.818112] CPU: L2 cache: 4096K [ 17.821316] CPU 0/0 -> Node 0 [ 17.824273] using mwait in idle threads. [ 17.828165] CPU: Physical Processor ID: 0 [ 17.832145] CPU: Processor Core ID: 0 [ 17.835788] CPU0: Thermal monitoring enabled (TM2) [ 17.840551] SMP alternatives: switching to UP code [ 17.845510] Early unpacking initramfs... done [ 17.942116] ACPI: Core revision 20070126 [ 17.946062] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.058344] Using local APIC timer interrupts. [ 18.100260] result 20781236 [ 18.103033] Detected 20.781 MHz APIC timer. [ 18.112230] SMP alternatives: switching to SMP code [ 18.117129] Booting processor 1/2 APIC 0x1 [ 18.131749] Initializing CPU#1 [ 18.281762] Calibrating delay using timer specific routine.. 5319.96 BogoMIPS (lpj=26599843) [ 18.281768] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.281769] CPU: L2 cache: 4096K [ 18.281771] CPU 1/1 -> Node 0 [ 18.281772] CPU: Physical Processor ID: 0 [ 18.281773] CPU: Processor Core ID: 1 [ 18.281778] CPU1: Thermal monitoring enabled (TM2) [ 18.282170] Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b [ 18.282257] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 18.351608] Brought up 2 CPUs [ 18.400263] migration_cost=11 [ 18.403405] NET: Registered protocol family 16 [ 18.407883] ACPI: bus type pci registered [ 18.411871] PCI: Using configuration type 1 [ 18.417157] ACPI: EC: Look up EC in DSDT [ 18.423153] ACPI: Interpreter enabled [ 18.426792] ACPI: (supports S0 S3 S4 S5) [ 18.430746] ACPI: Using IOAPIC for interrupt routing [ 18.440008] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.444777] PCI: Probing PCI hardware (bus 00) [ 18.450105] PCI: Transparent bridge - 0000:00:1e.0 [ 18.454917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.461041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] [ 18.467439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT] [ 18.473841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 18.500365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 18.507299] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) [ 18.514230] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 18.521141] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) [ 18.528069] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 18.534991] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) [ 18.541901] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) [ 18.548812] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 18.556881] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.562511] pnp: PnP ACPI init [ 18.565550] ACPI: bus type pnp registered [ 18.571903] pnp: PnP ACPI: found 18 devices [ 18.576058] ACPI: ACPI bus type pnp unregistered [ 18.580677] PCI: Using ACPI for IRQ routing [ 18.584834] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.593108] NET: Registered protocol family 8 [ 18.597436] NET: Registered protocol family 20 [ 18.601857] NetLabel: Initializing [ 18.605235] NetLabel: domain hash size = 128 [ 18.609562] NetLabel: protocols = UNLABELED CIPSOv4 [ 18.614505] NetLabel: unlabeled traffic allowed by default [ 18.620045] PCI-GART: No AMD northbridge found. [ 18.624550] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 18.629702] hpet0: 4 64-bit timers, 14318180 Hz [ 18.635235] pnp: 00:0f: ioport range 0x400-0x41f has been reserved [ 18.640864] Time: tsc clocksource has been installed. [ 18.646396] pnp: 00:0f: ioport range 0x420-0x43f has been reserved [ 18.652539] pnp: 00:0f: ioport range 0x440-0x45f has been reserved [ 18.658680] pnp: 00:0f: ioport range 0x460-0x47f has been reserved [ 18.664822] pnp: 00:0f: ioport range 0x480-0x48f has been reserved [ 18.670965] pnp: 00:0f: ioport range 0xf800-0xf81f has been reserved [ 18.677279] pnp: 00:0f: ioport range 0xf820-0xf83f has been reserved [ 18.683594] pnp: 00:0f: ioport range 0xf840-0xf85f has been reserved [ 18.689909] pnp: 00:10: ioport range 0x4d0-0x4d1 has been reserved [ 18.696054] pnp: 00:11: iomem range 0x0-0x9ffff could not be reserved [ 18.702453] pnp: 00:11: iomem range 0x100000-0xdfffffff could not be reserved [ 18.709543] pnp: 00:11: iomem range 0xe4000-0xfffff could not be reserved [ 18.716290] pnp: 00:11: iomem range 0xfec01000-0xfecfffff could not be reserved [ 18.723730] PCI: Bridge: 0000:00:1c.0 [ 18.727368] IO window: disabled. [ 18.730749] MEM window: disabled. [ 18.734214] PREFETCH window: disabled. [ 18.738111] PCI: Bridge: 0000:00:1c.1 [ 18.741750] IO window: 1000-1fff [ 18.745129] MEM window: f0200000-f02fffff [ 18.749285] PREFETCH window: f0300000-f03fffff [ 18.753874] PCI: Bridge: 0000:00:1e.0 [ 18.757511] IO window: disabled. [ 18.760891] MEM window: disabled. [ 18.764356] PREFETCH window: disabled. [ 18.768265] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.774506] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 18.781867] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.788100] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.794334] NET: Registered protocol family 2 [ 18.890475] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.898660] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 18.913306] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 18.920649] TCP: Hash tables configured (established 524288 bind 65536) [ 18.927221] TCP reno registered [ 18.970310] checking if image is initramfs... it is [ 19.157391] Freeing initrd memory: 2907k freed [ 19.162721] audit: initializing netlink socket (disabled) [ 19.168099] audit(1193132751.600:1): initialized [ 19.174075] VFS: Disk quotas dquot_6.5.1 [ 19.178005] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.184469] io scheduler noop registered [ 19.188366] io scheduler anticipatory registered [ 19.192971] io scheduler deadline registered (default) [ 19.198133] io scheduler cfq registered [ 19.201952] Boot video device is 0000:00:02.0 [ 19.209309] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 19.215570] assign_interrupt_mode Found MSI capability [ 19.220678] Allocate Port Service[0000:00:1c.0:pcie00] [ 19.225808] Allocate Port Service[0000:00:1c.0:pcie02] [ 19.230971] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 19.237226] assign_interrupt_mode Found MSI capability [ 19.242360] Allocate Port Service[0000:00:1c.1:pcie00] [ 19.247482] Allocate Port Service[0000:00:1c.1:pcie02] [ 19.265973] Real Time Clock Driver v1.12ac [ 19.270182] hpet_resources: 0xfed00000 is busy [ 19.274625] Linux agpgart interface v0.102 (c) Dave Jones [ 19.280019] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.287806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.293901] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.300255] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.305930] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 19.311601] ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 19.319005] 0000:00:03.3: ttyS2 at I/O 0x2248 (irq = 17) is a 16550A [ 19.325732] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.333434] input: Macintosh mouse button emulation as /class/input/input0 [ 19.340340] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 19.350667] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.355601] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.360732] mice: PS/2 mouse device common for all mice [ 19.366009] TCP cubic registered [ 19.369255] NET: Registered protocol family 1 [ 19.373630] swsusp: Resume From Partition /dev/sda5 [ 19.378479] PM: Checking swsusp image. [ 19.382216] swsusp: Error -6 check for resume file [ 19.386975] PM: Resume from disk failed. [ 19.391211] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.400986] Freeing unused kernel memory: 308k freed [ 19.421835] input: AT Translated Set 2 keyboard as /class/input/input1 [ 19.853592] SCSI subsystem initialized [ 19.864452] libata version 2.21 loaded. [ 19.874806] ata_piix 0000:00:1f.2: version 2.11 [ 19.879317] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 19.884487] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18 [ 19.891868] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 19.899235] scsi0 : ata_piix [ 19.902647] scsi1 : ata_piix [ 19.905561] ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000121f0 irq 14 [ 19.915760] ata2: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000121f8 irq 15 [ 20.097760] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABDA, max UDMA/100 [ 20.104679] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 20.147714] ata1.00: configured for UDMA/100 [ 20.647488] ata2.00: ATAPI: ATAPI DVD A DH16A1L, KH39, max UDMA/100 [ 20.847399] ata2.00: configured for UDMA/100 [ 20.851694] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 [ 20.861534] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 20.868631] sd 0:0:0:0: [sda] Write Protect is off [ 20.873390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.878419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.887446] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 20.894539] sd 0:0:0:0: [sda] Write Protect is off [ 20.899300] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.904326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.913318] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 20.955958] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.961705] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A1L KH39 PQ: 0 ANSI: 5 [ 20.969781] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] [ 20.983203] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.988508] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 20.995400] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 21.002839] Uniform CD-ROM driver Revision: 3.20 [ 21.007451] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 21.127255] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 18 (level, low) -> IRQ 18 [ 21.134698] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 21.141011] scsi2 : ata_piix [ 21.143969] scsi3 : ata_piix [ 21.146851] ata3: SATA max UDMA/133 cmd 0x0000000000012260 ctl 0x0000000000012282 bmdma 0x0000000000012210 irq 18 [ 21.157107] ata4: SATA max UDMA/133 cmd 0x0000000000012268 ctl 0x0000000000012286 bmdma 0x0000000000012218 irq 18 [ 21.510857] ACPI: SSDT DEFCD42B, 03AC (r1 COMPAQ CPU_TM2 1 MSFT 100000E) [ 21.518480] ACPI: SSDT DEFCD2AF, 017C (r1 COMPAQ CST 1 MSFT 100000E) [ 21.526068] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 21.531032] ACPI: Processor [CPU0] (supports 8 throttling states) [ 21.537254] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 21.542218] ACPI: Processor [CPU1] (supports 8 throttling states) [ 21.548300] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 21.557920] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 21.572825] Marking TSC unstable due to possible TSC halt in C2 [ 21.578710] Time: hpet clocksource has been installed. [ 21.684056] kjournald starting. Commit interval 5 seconds [ 21.684267] EXT3 FS on sda6, internal journal [ 21.684269] EXT3-fs: mounted filesystem with ordered data mode. [ 22.658230] Adding 2104472k swap on /dev/disk/by-id/scsi-SATA_Hitachi_HDS7216_PVD301Z9R3DSTK-part5. Priority:-1 extents:1 across:2104472k [ 23.277189] parport_pc 00:07: reported by Plug and Play ACPI [ 23.282866] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 23.369625] lp0: using parport0 (interrupt-driven). [ 24.010128] usbcore: registered new interface driver usbfs [ 24.015595] usbcore: registered new interface driver hub [ 24.020894] usbcore: registered new device driver usb [ 24.037131] USB Universal Host Controller Interface driver v3.0 [ 24.043109] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 24.050505] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 24.056732] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 24.062177] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 24.069562] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120 [ 24.075378] usb usb1: configuration #1 chosen from 1 choice [ 24.080949] hub 1-0:1.0: USB hub found [ 24.084680] hub 1-0:1.0: 2 ports detected [ 24.159704] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 24.166107] Copyright (c) 1999-2006 Intel Corporation. [ 24.197081] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 24.204553] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 24.210810] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 24.216028] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 24.223508] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140 [ 24.229308] usb usb2: configuration #1 chosen from 1 choice [ 24.234966] hub 2-0:1.0: USB hub found [ 24.238757] hub 2-0:1.0: 2 ports detected [ 24.346680] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 24.354049] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 24.360279] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.365494] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 24.372870] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160 [ 24.378654] usb usb3: configuration #1 chosen from 1 choice [ 24.384207] hub 3-0:1.0: USB hub found [ 24.387936] hub 3-0:1.0: 2 ports detected [ 24.496311] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 24.503740] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 24.509971] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 24.515179] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 24.522610] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180 [ 24.528464] usb usb4: configuration #1 chosen from 1 choice [ 24.534016] hub 4-0:1.0: USB hub found [ 24.537745] hub 4-0:1.0: 2 ports detected [ 24.645922] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 24.653402] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.659684] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.664945] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 24.672315] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021a0 [ 24.678144] usb usb5: configuration #1 chosen from 1 choice [ 24.683752] hub 5-0:1.0: USB hub found [ 24.687539] hub 5-0:1.0: 2 ports detected [ 24.795597] ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 24.802971] PCI: Setting latency timer of device 0000:30:00.0 to 64 [ 24.888064] e1000: 0000:30:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:17:3e:52:66 [ 24.997491] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 25.004464] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 25.012780] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 25.019019] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 25.024243] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 25.031629] ehci_hcd 0000:00:1a.7: debug port 1 [ 25.036135] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 25.043317] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf01a6000 [ 25.052829] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.060355] usb usb6: configuration #1 chosen from 1 choice [ 25.065918] hub 6-0:1.0: USB hub found [ 25.069647] hub 6-0:1.0: 4 ports detected [ 25.174591] agpgart: Detected an Intel Q35 Chipset. [ 25.180770] agpgart: Detected 6140K stolen memory. [ 25.198602] agpgart: AGP aperture is 256M @ 0xe0000000 [ 25.206229] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 25.214217] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 25.220451] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 25.225677] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 25.233050] ehci_hcd 0000:00:1d.7: debug port 1 [ 25.237554] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 25.244737] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf01a6400 [ 25.254225] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.261729] usb usb7: configuration #1 chosen from 1 choice [ 25.267285] hub 7-0:1.0: USB hub found [ 25.271011] hub 7-0:1.0: 6 ports detected [ 25.581321] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx [ 26.008440] loop: module loaded [ 28.511120] input: Power Button (FF) as /class/input/input2 [ 28.516686] ACPI: Power Button (FF) [PWRF] [ 28.520840] input: Power Button (CM) as /class/input/input3 [ 28.526602] ACPI: Power Button (CM) [PBTN] [ 29.274710] e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 29.283541] e1000: eth1: e1000_watchdog: 10/100 speed: disabling TSO [ 29.438758] NET: Registered protocol family 17 [ 50.012036] audit(1193157983.661:2): audit_pid=4347 old=0 by auid=4294967295 [ 51.794263] IA-32 Microcode Update Driver: v1.14a [ 51.941359] NET: Registered protocol family 10 [ 51.945843] lo: Disabled Privacy Extensions [ 62.680548] eth1: no IPv6 routers present