root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/xen.gz console=com1 com1=115200,8n1 iommu=no-qinval loglvl=all lo glvl_guest=all ro [Multiboot-elf, <0x100000:0x13b768:0x8e898>, shtab=0x2ca078, entry=0x100000] module /boot/vmlinuz-2.6.18.8-xenkci ro root=LABEL=/ console=ttyS0,115200,8n1 pciback.hide=(04:00.0)(04:00.1) pciback.verbose_request=1 [Multiboot-module @ 0x2cb000, 0x76f7d8 bytes] module /boot/initrd-2.6.18-xenkci.img [Multiboot-module @ 0xa3b000, 0x443600 bytes] __ __ _____ _ _ _ _ _ \ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___ \ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ / \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/ /_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___| (XEN) Xen version 3.4-unstable (root@localdomain) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) Fri Apr 3 14:20:00 EDT 2009 (XEN) Latest ChangeSet: Mon Mar 30 16:48:26 2009 +0100 19433:d5ddc782bc49 (XEN) Command line: console=com1 com1=115200,8n1 iommu=no-qinval loglvl=all loglvl_guest=all ro (XEN) Video information: (XEN) No VGA detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009a800 (usable) (XEN) 000000000009a800 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007f7b0000 (usable) (XEN) 000000007f7b0000 - 000000007f7be000 (ACPI data) (XEN) 000000007f7be000 - 000000007f7d0000 (ACPI NVS) (XEN) 000000007f7d0000 - 000000007f7e0000 (reserved) (XEN) 000000007f7ed000 - 0000000080000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffb00000 - 0000000100000000 (reserved) (XEN) System RAM: 2039MB (2088232kB) (XEN) ACPI: RSDP 000FA6B0, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT 7F7B0100, 005C (r1 031209 XSDT0910 20090312 MSFT 97) (XEN) ACPI: FACP 7F7B0290, 00F4 (r4 031209 FACP0910 20090312 MSFT 97) (XEN) ACPI: DSDT 7F7B04B0, 4FFD (r2 5007_ 5007_115 115 INTL 20051117) (XEN) ACPI: FACS 7F7BE000, 0040 (XEN) ACPI: APIC 7F7B0390, 008C (r2 031209 APIC0910 20090312 MSFT 97) (XEN) ACPI: MCFG 7F7B0470, 003C (r1 031209 OEMMCFG 20090312 MSFT 97) (XEN) ACPI: OEMB 7F7BE040, 0072 (r1 031209 OEMB0910 20090312 MSFT 97) (XEN) ACPI: HPET 7F7BA4B0, 0038 (r1 031209 OEMHPET 20090312 MSFT 97) (XEN) ACPI: DMAR 7F7BE0C0, 00F8 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: SSDT 7F7BFC10, 0363 (r1 DpgPmm CpuPm 12 INTL 20051117) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000007f7b0000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[7f7be00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) (XEN) Processor #1 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) (XEN) Processor #3 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) (XEN) Processor #5 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) (XEN) Processor #7 7:10 APIC version 21 (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0xffffffff base: 0xfed00000 (XEN) [VT-D]dmar.c:485: Host address width 39 (XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:349: dmaru->address = fbffe000 (XEN) [VT-D]dmar.c:306: found IOAPIC: bdf = f0:1f.7 (XEN) [VT-D]dmar.c:358: found INCLUDE_ALL (XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7 (XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2 (XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7 (XEN) [VT-D]dmar.c:502: found ACPI_DMAR_ATSR (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:3.0 sec = 5 sub = 5 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:4.0 sec = 6 sub = 6 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:5.0 sec = 3 sub = 3 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:7.0 sec = 8 sub = 8 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:8.0 sec = 7 sub = 7 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:9.0 sec = 4 sub = 4 (XEN) [VT-D]dmar.c:287: found bridge: bdf = 0:a.0 sec = 2 sub = 2 (XEN) Intel VT-d DMAR tables have been parsed. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2128.038 MHz processor. (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) VMX: EPT is available. (XEN) VMX: VPID is available. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU0 (XEN) CMCI: CPU0 owner_map[6c], no_cmci_map[93] (XEN) CPU0: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 1/2 eip 8c000 (XEN) Initializing CPU#1 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU1 (XEN) CMCI: CPU1 owner_map[2c], no_cmci_map[93] (XEN) CPU1: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 2/4 eip 8c000 (XEN) Initializing CPU#2 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU2 (XEN) CMCI: CPU2 owner_map[2c], no_cmci_map[93] (XEN) CPU2: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 3/6 eip 8c000 (XEN) Initializing CPU#3 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU3 (XEN) CMCI: CPU3 owner_map[2c], no_cmci_map[93] (XEN) CPU3: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 4/1 eip 8c000 (XEN) Initializing CPU#4 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#4. (XEN) CPU4: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU4 (XEN) CMCI: CPU4 owner_map[0], no_cmci_map[93] (XEN) CPU4: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 5/3 eip 8c000 (XEN) Initializing CPU#5 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#5. (XEN) CPU5: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU5 (XEN) CMCI: CPU5 owner_map[0], no_cmci_map[93] (XEN) CPU5: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 6/5 eip 8c000 (XEN) Initializing CPU#6 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#6. (XEN) CPU6: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU6 (XEN) CMCI: CPU6 owner_map[0], no_cmci_map[93] (XEN) CPU6: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Booting processor 7/7 eip 8c000 (XEN) Initializing CPU#7 (XEN) , L1 D cache: 32K (XEN) CPU: Physical Processor ID: 0 (XEN) Intel machine check reporting enabled on CPU#7. (XEN) CPU7: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU7 (XEN) CMCI: CPU7 owner_map[0], no_cmci_map[93] (XEN) CPU7: Intel(R) Xeon(R) CPU L5518 @ 2.13GHz stepping 05 (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 8 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) Brought up 8 CPUs (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) [VT-D]iommu.c:1789:d32767 Interrupt Remapping disabled since Queued Invalidation isn't supported or enabled. (XEN) Intel VT-d Snoop Control supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation not supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) HPET: 4 timers in total, 0 timers will be used for broadcast (XEN) HPET broadcast init failed, turn to PIT broadcast. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:0.0 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:14.0 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:14.1 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:14.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:14.3 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.0 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.1 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.2 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.3 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.4 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.5 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.6 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 0:16.7 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1f.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1f.3 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 2:0.0 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 2:0.1 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 3:0.0 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 3:0.1 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 4:0.0 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 4:0.1 (XEN) [VT-D]iommu.c:1230:d32767 domain_context_mapping:PCIe: bdf = 6:0.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:0.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:0.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:2.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:2.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:2.4 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:2.5 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:3.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:3.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:3.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:3.4 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:4.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:4.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:4.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:4.3 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:5.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:5.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:5.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:5.3 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:6.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:6.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:6.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = fe:6.3 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]iommu.c:1237:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]iommu.c:620: iommu_enable_translation: iommu->reg = ffff828bfff57000 (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x295be0 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80496000 memsz=0x92928 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80529000 memsz=0xc08 (XEN) elf_parse_binary: phdr: paddr=0xffffffff8052a000 memsz=0xcf90c (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff805f990c (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000 (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kend = 0xffffffff805f990c (XEN) virt_entry = 0xffffffff80200000 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805f990c (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000007b000000->000000007c000000 (478343 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff805f990c (XEN) Init. ramdisk: ffffffff805fa000->ffffffff80a3d600 (XEN) Phys-Mach map: ffffffff80a3e000->ffffffff80dec438 (XEN) Start info: ffffffff80ded000->ffffffff80ded4b4 (XEN) Page tables: ffffffff80dee000->ffffffff80df9000 (XEN) Boot stack: ffffffff80df9000->ffffffff80dfa000 (XEN) TOTAL: ffffffff80000000->ffffffff81000000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 8 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff80495be0 (XEN) elf_load_binary: phdr 1 at 0xffffffff80496000 -> 0xffffffff80528928 (XEN) elf_load_binary: phdr 2 at 0xffffffff80529000 -> 0xffffffff80529c08 (XEN) elf_load_binary: phdr 3 at 0xffffffff8052a000 -> 0xffffffff80565108 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 132kB init memory. kernel direct mapping tables up to 76487000 @ dfa000-11b0000 Bootdata ok (command line is ro root=LABEL=/ console=ttyS0,115200,8n1 pciback.hide=(04:00.0)(04:00.1) pciback.verbose_request=1) Linux version 2.6.18.8-xenkci (root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #3 SMP Fri Apr 3 14:18:07 EDT 2009 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000076487000 (usable) DMI present. >>> ERROR: Invalid checksum ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists. Total pages: 477864 Kernel command line: ro root=LABEL=/ console=ttyS0,115200,8n1 pciback.hide=(04:00.0)(04:00.1) pciback.verbose_request=1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2128.038 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: ffff8800032bc000 - ffff8800034bc000 Address size: 22 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 1881268k/1937948k available (2206k kernel code, 48180k reserved, 945k data, 180k init) Calibrating delay using timer specific routine.. 4257.40 BogoMIPS (lpj=21287001) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 SMP alternatives: switching to SMP code Initializing CPU#1 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Initializing CPU#2 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Initializing CPU#3 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Initializing CPU#4 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Initializing CPU#5 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Initializing CPU#6 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Brought up 8 CPUs Initializing CPU#7 , L1 D cache: 32K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 migration_cost=20 checking if image is initramfs... it is Freeing initrd memory: 4365k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 12 *14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *6 7 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! pnp: PnP ACPI: found 15 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0c: ioport range 0xa00-0xa1f has been reserved (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:04.0 (XEN) PCI add device 00:05.0 (XEN) PCI add device 00:07.0 (XEN) PCI add device 00:08.0 (XEN) PCI add device 00:09.0 (XEN) PCI add device 00:0a.0 (XEN) PCI add device 00:14.0 (XEN) PCI add device 00:14.1 (XEN) PCI add device 00:14.2 (XEN) PCI add device 00:14.3 (XEN) PCI add device 00:16.0 (XEN) PCI add device 00:16.1 (XEN) PCI add device 00:16.2 (XEN) PCI add device 00:16.3 (XEN) PCI add device 00:16.4 (XEN) PCI add device 00:16.5 (XEN) PCI add device 00:16.6 (XEN) PCI add device 00:16.7 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 06:00.0 (XEN) PCI add device 03:00.0 (XEN) PCI add device 03:00.1 (XEN) PCI add device 04:00.0 pciback 0000:04:00.0: seizing device (XEN) PCI add device 04:00.1 pciback 0000:04:00.1: seizing device (XEN) PCI add device 02:00.0 (XEN) PCI add device 02:00.1 PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: e000-efff MEM window: fbc00000-fbefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: c000-cfff MEM window: disabled. PREFETCH window: faf00000-faffffff PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:08.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:09.0 IO window: d000-dfff MEM window: fba00000-fbbfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: b000-bfff MEM window: fb700000-fb8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a-xen audit: initializing netlink socket (disabled) audit(1239094683.001:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2 Copyright (c) 2008 Intel Corporation. (XEN) PCI add device 02:00.0 GSI 16 sharing vector 0x98 and IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:a0:a5:62:85:88 igb 0000:02:00.0: eth0: PBA No: 000001-004 igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s) (XEN) PCI add device 02:00.1 GSI 17 sharing vector 0xD0 and IRQ 17 ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17 igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:a0:a5:62:85:89 igb 0000:02:00.1: eth1: PBA No: 000001-004 igb 0000:02:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s) ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.56.5-NAPI Copyright (c) 1999-2008 Intel Corporation. Xen virtual console successfully installed as xvc0 Event-channel device installed. netfront: Initialising virtual ethernet driver. ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt for device 0000:04:00.1 disabled ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt for device 0000:04:00.0 disabled Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 180k freed Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. input: AT Translated Set 2 keyboard as /class/input/input0 Creating block device nodes. Loading usbcore.ko module usbcore: registered new driver usbfs usbcore: registered new driver hub Loading ehci-hcd.ko module (XEN) PCI add device 00:1d.7 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfb9d6000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Loading ohci-hcd.ko module Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 (XEN) PCI add device 00:1d.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ac00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected (XEN) PCI add device 00:1d.1 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000a880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected (XEN) PCI add device 00:1d.2 GSI 18 sharing vector 0x49 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading scsi_transport_sas.ko module Loading mptbase.ko module Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Loading mptscsih.ko module Loading mptsas.ko module Fusion MPT SAS Host driver 3.04.01 (XEN) PCI add device 06:00.0 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 mptbase: Initiating ioc0 bringup ioc0: SAS1064E: Capabilities={Initiator} scsi0 : ioc0: LSISAS1064E, FwRev=011b0000h, Ports=1, MaxQ=277, IRQ=16 Vendor: SEAGATE Model: ST9146802SS Rev: 0003 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 286749488 512-byte hdwr sectors (146816 MB) sda: Write Protect is off SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 286749488 512-byte hdwr sectors (146816 MB) sda: Write Protect is off SCSI device sda: drive cache: write back w/ FUA sda: sda1 sda2 sda3 < sda5 > sd 0:0:0:0: Attached scsi disk sda Loading libata.ko module Loading ahci.ko module (XEN) PCI add device 00:1f.2 GSI 19 sharing vector 0x51 and IRQ 19 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000022100 ctl 0x0 bmdma 0x0 irq 243 ata2: SATA max UDMA/133 cmd 0xFFFFC20000022180 ctl 0x0 bmdma 0x0 irq 243 ata3: SATA max UDMA/133 cmd 0xFFFFC20000022200 ctl 0x0 bmdma 0x0 irq 243 ata4: SATA max UDMA/133 cmd 0xFFFFC20000022280 ctl 0x0 bmdma 0x0 irq 243 ata5: SATA max UDMA/133 cmd 0xFFFFC20000022300 ctl 0x0 bmdma 0x0 irq 243 ata6: SATA max UDMA/133 cmd 0xFFFFC20000022380 ctl 0x0 bmdma 0x0 irq 243 scsi1 : ahci ata1: SATA link down (SStatus 0 SControl 300) scsi2 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi6 : ahci ata6: SATA link down (SStatus 0 SControl 300) Loading usb-storage.ko module Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. Waiting for driver initialization. Loading ide-disk.ko module Loading aacraid.ko module Adaptec aacraid driver (1.1-5[2409]-mh2) Waiting for driver initialization. Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting Welcome to CentOS release 5.3 (Final) Press 'I' to enter interactive startup. Setting clock (localtime): Tue Apr 7 08:58:50 EDT 2009 [ OK ] Starting udev: (XEN) PCI add device 00:1f.3 [ OK ] Loading default keymap (us): [ OK ] Setting hostname localhost.localdomain: [ OK ] (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: (XEN) _PPC: 0 (XEN) cpu1 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu0== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54585186609] (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 0 initialization completed (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: (XEN) _PPC: 0 (XEN) cpu2 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu1== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54587928266] (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) adding CPU 1 (XEN) Set CPU acpi_id(3) cpuid(2) Px State info: (XEN) _PPC: 0 (XEN) cpu3 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu2== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54589552649] (XEN) Set CPU acpi_id(3) cpuid(2) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) adding CPU 2 (XEN) Set CPU acpi_id(4) cpuid(3) Px State info: (XEN) _PPC: 0 (XEN) cpu4 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu3== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54591172523] (XEN) Set CPU acpi_id(4) cpuid(3) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) adding CPU 3 (XEN) Set CPU acpi_id(5) cpuid(4) Px State info: (XEN) _PPC: 0 (XEN) cpu5 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu4== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54592795045] (XEN) Set CPU acpi_id(5) cpuid(4) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) adding CPU 4 (XEN) Set CPU acpi_id(6) cpuid(5) Px State info: (XEN) _PPC: 0 (XEN) cpu6 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu5== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54594413224] (XEN) Set CPU acpi_id(6) cpuid(5) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) adding CPU 5 (XEN) Set CPU acpi_id(7) cpuid(6) Px State info: (XEN) _PPC: 0 (XEN) cpu7 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu6== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54596029552] (XEN) Set CPU acpi_id(7) cpuid(6) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) adding CPU 6 (XEN) Set CPU acpi_id(8) cpuid(7) Px State info: (XEN) _PPC: 0 (XEN) cpu8 cx acpi info: (XEN) count = 3 (XEN) flags: bm_cntl[1], bm_chk[1], has_cst[1], (XEN) pwr_setup_done[1], bm_rld_set[0] (XEN) states[0]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x0 (XEN) type = 1 (XEN) latency = 1 (XEN) power = 1000 (XEN) dp(@0x0000000000000000) (XEN) states[1]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x10 (XEN) type = 2 (XEN) latency = 17 (XEN) power = 500 (XEN) dp(@0x0000000000000000) (XEN) states[2]: (XEN) reg.space_id = 0x7f (XEN) reg.bit_width = 0x1 (XEN) reg.bit_offset = 0x2 (XEN) reg.access_size = 0x1 (XEN) reg.address = 0x20 (XEN) type = 3 (XEN) latency = 17 (XEN) power = 350 (XEN) dp(@0x0000000000000000) (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) MWAIT leaf not supported by cpuid (XEN) ==cpu7== (XEN) active state: C-1 (XEN) max_cstate: C7 (XEN) states: (XEN) C1: type[C1] latency[000] usage[00000000] duration[0] (XEN) C0: usage[00000000] duration[54597670530] (XEN) Set CPU acpi_id(8) cpuid(7) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=6 (XEN) State0: 2134MHz 70000mW 10us 10us 0x11 0x11 (XEN) State1: 2133MHz 60000mW 10us 10us 0x10 0x10 (XEN) State2: 2000MHz 49000mW 10us 10us 0xf 0xf (XEN) State3: 1867MHz 41000mW 10us 10us 0xe 0xe (XEN) State4: 1733MHz 34000mW 10us 10us 0xd 0xd (XEN) State5: 1600MHz 28000mW 10us 10us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=8 (XEN) _PPC: 0 (XEN) adding CPU 7 No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /: clean, 250960/2560864 files, 1945012/2560351 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Applying Intel CPU microcode update: FATAL: Module microcode not found. ERROR: Module microcode does not exist in /proc/modules Starting background readahead: [ OK ] Checking for hardware changes [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth2: Determining IP information for eth2... done. [ OK ] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Starting system message bus: [ OK ] [ OK ] Bluetooth services:[ OK ] Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: [ OK ] Starting autofs: Loading autofs4: [ OK ] Starting automount: [ OK ] [ OK ] Starting acpi daemon: [ OK ] Starting sshd: [ OK ] Starting cups: [ OK ] Starting xinetd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting libvirtd daemon: [ OK ] Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: Bridge firewalling registered ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack [ OK ] Starting xend: FATAL: Module blkbk not found. FATAL: Module blktap not found. FATAL: Module netbk not found. FATAL: Module netloop not found. [ OK ] Starting Cluster Module - cluster monitor: Setting verbosity level to LogBasic [ OK ] Starting oddjobd: [ OK ] Starting ricci: [ OK ] Starting smartd: [ OK ] CentOS release 5.3 (Final) Kernel 2.6.18.8-xenkci on an x86_64 localhost.localdomain login: