__ __ _ _ ___ ___ ____ \ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___|___ \ _ __ _ __ ___ \ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| __) |__| '_ \| '__/ _ \ / \ __/ | | | |__ _| |_| | |_| |__| | | (__ / __/|__| |_) | | | __/ /_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|_____| | .__/|_| \___| |_| (XEN) Xen version 4.0.0-rc2-pre (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Thu Jan 21 08:45:35 CET 2010 (XEN) Latest ChangeSet: Thu Jan 21 11:27:11 2010 +0000 20836:cec57fd4565e (XEN) Command line: dom0_mem=512M com1=115200,8n1 console=com1 loglvl=all loglvl_guest=all iommu_inclusive_mapping=1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) EDID info not retrieved because of reasons unknown (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e800 (usable) (XEN) 000000000009e800 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007ee70000 (usable) (XEN) 000000007ee70000 - 000000007ee7e000 (ACPI data) (XEN) 000000007ee7e000 - 000000007eed0000 (ACPI NVS) (XEN) 000000007eed0000 - 000000007ef00000 (reserved) (XEN) 00000000fed00000 - 00000000fed01100 (reserved) (XEN) 00000000fed02000 - 00000000fed14c00 (reserved) (XEN) 00000000fed20000 - 00000000fed40000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) System RAM: 1999MB (2047104kB) (XEN) ACPI: RSDP 000FB080, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT 7EE70100, 0064 (r1 A_M_I_ OEMXSDT 5000927 MSFT 97) (XEN) ACPI: FACP 7EE70290, 00F4 (r3 A_M_I_ OEMFACP 5000927 MSFT 97) (XEN) ACPI: DSDT 7EE70440, 841F (r1 A1065 A1065000 0 INTL 20060113) (XEN) ACPI: FACS 7EE7E000, 0040 (XEN) ACPI: APIC 7EE70390, 006C (r1 A_M_I_ OEMAPIC 5000927 MSFT 97) (XEN) ACPI: MCFG 7EE70400, 003C (r1 A_M_I_ OEMMCFG 5000927 MSFT 97) (XEN) ACPI: OEMB 7EE7E040, 0089 (r1 A_M_I_ AMI_OEM 5000927 MSFT 97) (XEN) ACPI: HPET 7EE78860, 0038 (r1 A_M_I_ OEMHPET 5000927 MSFT 97) (XEN) ACPI: GSCI 7EE7E0D0, 2024 (r1 A_M_I_ GMCHSCI 5000927 MSFT 97) (XEN) ACPI: DMAR 7EE80100, 0138 (r1 AMI OEMDMAR 1 MSFT 97) (XEN) ACPI: SSDT 7EE811B0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-000000007ee70000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[7ee7e00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) (XEN) Processor #2 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) (XEN) Processor #3 7:7 APIC version 20 (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) [VT-D]dmar.c:586: Host address width 36 (XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed90000 (XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0 (XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed92000 (XEN) [VT-D]dmar.c:326: endpoint: 0:3.0 (XEN) [VT-D]dmar.c:595: found ACPI_DMAR_DRHD: (XEN) [VT-D]dmar.c:374: dmaru->address = fed93000 (XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL (XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0 (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1 (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2 (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7 (XEN) [VT-D]dmar.c:490: RMRR region: base_addr ed000 end_address effff (XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:425: RMRR address range not in reserved memory base = 7f000000 end = 7effffff; iommu_inclusive_mapp ing=1 parameter may be needed. (XEN) [VT-D]dmar.c:599: found ACPI_DMAR_RMRR: (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0 (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1 (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2 (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2 (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7 (XEN) [VT-D]dmar.c:490: RMRR region: base_addr 7eee0000 end_address 7eeeffff (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: Not using MMCONFIG. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2666.419 MHz processor. (XEN) Initing memory sharing. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU0 has no CMCI support (XEN) [VT-D]iommu.c:1062: drhd->address = fed92000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff57000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed90000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff56000 (XEN) [VT-D]iommu.c:1062: drhd->address = fed93000 (XEN) [VT-D]iommu.c:1063: iommu->reg = ffff82c3fff55000 (XEN) Intel VT-d Snoop Control not supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation not supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) HVM: ASIDs disabled. (XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Booting processor 2/2 eip 8c000 (XEN) Initializing CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 2 (XEN) HVM: ASIDs disabled. (XEN) xsave_init: cpu2: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU2 has no CMCI support (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Booting processor 3/3 eip 8c000 (XEN) Initializing CPU#3 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 3072K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 3 (XEN) HVM: ASIDs disabled. (XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU3 has no CMCI support (XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) [VT-D]iommc:1306:d32767 doin_context_mappi:PCI: bdf = 0:0. (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:0.0: no extended config (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:3.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:19.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:19.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.1 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.1: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.2 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.2: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1a.7 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.7: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1b.0: no extended config (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1c.0: no extended config (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1c.4: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.1: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.2: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.7: no extended config (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1e.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.2: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 0:1f.3 (XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.3: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:1:0.0: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 1:0.1 (XEN) [VT-D]mmconfig-shared.c:460: next cap:1:0.1: no extended config (XEN) [VT-D]iommu.c:1299:d32767 domain_context_mapping:PCIe: bdf = 2:0.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:2:0.0: no extended config (XEN) [VT-D]iommu.c:1306:d32767 domain_context_mapping:PCI: bdf = 4:3.0 (XEN) [VT-D]mmconfig-shared.c:460: next cap:4:3.0: no extended config (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff57000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff56000 (XEN) [VT-D]iommu.c:684: iommu_enable_translation: iommu->reg = ffff82c3fff55000 (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x90c000 (XEN) elf_parse_binary: phdr: paddr=0x190c000 memsz=0x121fb8 (XEN) elf_parse_binary: phdr: paddr=0x1a2e000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x1a2f000 memsz=0x158e0 (XEN) elf_parse_binary: phdr: paddr=0x1a448e0 memsz=0x1b2720 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1bf7000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81a44ae0 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff81bf7000 (XEN) virt_entry = 0xffffffff81a44ae0 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1bf7000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000074000000->0000000078000000 (114688 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81bf7000 (XEN) Init. ramdisk: ffffffff81bf7000->ffffffff822a6a00 (XEN) Phys-Mach map: ffffffff822a7000->ffffffff823a7000 (XEN) Start info: ffffffff823a7000->ffffffff823a74b4 (XEN) Page tables: ffffffff823a8000->ffffffff823bf000 (XEN) Boot stack: ffffffff823bf000->ffffffff823c0000 (XEN) TOTAL: ffffffff80000000->ffffffff82800000 (XEN) ENTRY ADDRESS: ffffffff81a44ae0 (XEN) Dom0 has maximum 4 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8190c000 (XEN) elf_load_binary: phdr 1 at 0xffffffff8190c000 -> 0xffffffff81a2dfb8 (XEN) elf_load_binary: phdr 2 at 0xffffffff81a2e000 -> 0xffffffff81a2e888 (XEN) elf_load_binary: phdr 3 at 0xffffffff81a2f000 -> 0xffffffff81a448e0 (XEN) elf_load_binary: phdr 4 at 0xffffffff81a448e0 -> 0xffffffff81aca000 (XEN) Scrubbing Free RAM: ..............done. (XEN) Xen trace buffers: disabled (XEN) tmem: initialized comp=0 global-lock=0 (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 156kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.6 (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Thu Jan 21 10:04:50 CET 2010 [ 0.000000] Command line: root=/dev/sda1 ro earlyprintk=xen console=hvc0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 20000-7ee70 [ 0.000000] xen_release_chunk: looking at area pfn 7ef00-fec00 [ 0.000000] xen_release_chunk: looking at area pfn fec01-fed00 [ 0.000000] xen_release_chunk: looking at area pfn fed15-fed20 [ 0.000000] xen_release_chunk: looking at area pfn fed40-fee00 [ 0.000000] xen_release_chunk: looking at area pfn fee01-ffe00 [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] Xen: 000000000009e800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] Xen: 000000007ee70000 - 000000007ee7e000 (ACPI data) [ 0.000000] Xen: 000000007ee7e000 - 000000007eed0000 (ACPI NVS) [ 0.000000] Xen: 000000007eed0000 - 000000007ef00000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fed00000 - 00000000fed01100 (reserved) [ 0.000000] Xen: 00000000fed02000 - 00000000fed14c00 (reserved) [ 0.000000] Xen: 00000000fed20000 - 00000000fed40000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] console [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] modified: 000000007ee70000 - 000000007ee7e000 (ACPI data) [ 0.000000] modified: 000000007ee7e000 - 000000007eed0000 (ACPI NVS) [ 0.000000] modified: 000000007eed0000 - 000000007ef00000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed01100 (reserved) [ 0.000000] modified: 00000000fed02000 - 00000000fed14c00 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed40000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] RAMDISK: 01bf7000 - 022a6a00 [ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000007ee70100 00064 (v01 A_M_I_ OEMXSDT 05000927 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ee70290 000F4 (v03 A_M_I_ OEMFACP 05000927 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ee70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 000000007ee7e000 00040 [ 0.000000] ACPI: APIC 000000007ee70390 0006C (v01 A_M_I_ OEMAPIC 05000927 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ee70400 0003C (v01 A_M_I_ OEMMCFG 05000927 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ee7e040 00089 (v01 A_M_I_ AMI_OEM 05000927 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007ee78860 00038 (v01 A_M_I_ OEMHPET 05000927 MSFT 00000097) [ 0.000000] ACPI: GSCI 000000007ee7e0d0 02024 (v01 A_M_I_ GMCHSCI 05000927 MSFT 00000097) [ 0.000000] ACPI: 000000007ee80100 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000007ee811b0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [00023a8000 - 00023bf000] XEN PAGETABLES ==> [00023a8000 - 00023bf000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001bd66f4] TEXT DATA BSS ==> [0001000000 - 0001bd66f4] [ 0.000000] #4 [0001bf7000 - 00022a6a00] RAMDISK ==> [0001bf7000 - 00022a6a00] [ 0.000000] #5 [00022a7000 - 00023a8000] XEN START INFO ==> [00022a7000 - 00023a8000] [ 0.000000] #6 [0001bd7000 - 0001bd7298] BRK ==> [0001bd7000 - 0001bd7298] [ 0.000000] #7 [0000100000 - 00001e8000] PGTABLE ==> [0000100000 - 00001e8000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=00010900 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 (XEN) ioapic_guest_write: new_entry=00010900 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1431: dom0: pirq 0 or irq 3 already mapped (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=00010900 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:1431: dom0: pirq 0 or irq 5 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 6 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 7 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 8 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 9 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 10 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 11 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 12 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 13 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 14 already mapped (XEN) irq.c:1431: dom0: pirq 0 or irq 15 already mapped (XEN) allocated vector for irq:16 (XEN) irq.c:1431: dom0: pirq 0 or irq 16 already mapped (XEN) allocated vector for irq:17 (XEN) irq.c:1431: dom0: pirq 0 or irq 17 already mapped (XEN) allocated vector for irq:18 (XEN) irq.c:1431: dom0: pirq 0 or irq 18 already mapped (XEN) allocated vector for irq:19 (XEN) irq.c:1431: dom0: pirq 0 or irq 19 already mapped (XEN) allocated vector for irq:20 (XEN) irq.c:1431: dom0: pirq 0 or irq 20 already mapped (XEN) allocated vector for irq:21 (XEN) irq.c:1431: dom0: pirq 0 or irq 21 already mapped (XEN) allocated vector for irq:22 (XEN) irq.c:1431: dom0: pirq 0 or irq 22 already mapped (XEN) allocated vector for irq:23 (XEN) irq.c:1431: dom0: pirq 0 or irq 23 already mapped [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7ef00000 (gap: 7ef00000:7fd00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocated 22 4k pages, static data 88288 bytes [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128931 [ 0.000000] Kernel command line: root=/dev/sda1 ro earlyprintk=xen console=hvc0 [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) [ 0.000000] Placing 64MB Xen software IO TLB between ffff880002ec0000 - ffff880006ec0000 [ 0.000000] Xen software IO TLB at phys 0x2ec0000 - 0x6ec0000 [ 0.000000] Memory: 427780k/524288k available (6256k kernel code, 456k absent, 95356k reserved, 4167k data, 568k init ) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 (XEN) ioapic_guest_write: new_entry=00000900 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! [ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=00000904 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! [ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 [ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 [ 0.000000] Detected 2666.418 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console handover: boot [xenboot0] -> real [hvc0] [ 0.000999] installing Xen timer for CPU 0 [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.83 BogoMIPS (lpj=2666418) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys freezer [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only. [ 0.000999] SMP alternatives: switching to UP code [ 0.001256] ACPI: Core revision 20090521 [ 0.014695] installing Xen timer for CPU 1 [ 0.014739] SMP alternatives: switching to SMP code [ 0.000008] Initializing CPU#1 [ 0.000046] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000048] CPU: L2 cache: 3072K [ 0.000051] CPU: Physical Processor ID: 0 [ 0.000053] CPU: Processor Core ID: 1 [ 0.000055] mce: CPU supports 6 MCE banks [ 0.015157] installing Xen timer for CPU 2 [ 0.000018] Initializing CPU#2 [ 0.000071] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000073] CPU: L2 cache: 3072K [ 0.000076] CPU: Physical Processor ID: 0 [ 0.000078] CPU: Processor Core ID: 2 [ 0.000081] mce: CPU supports 6 MCE banks [ 0.015412] installing Xen timer for CPU 3 [ 0.000008] Initializing CPU#3 [ 0.000044] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000046] CPU: L2 cache: 3072K [ 0.000050] CPU: Physical Processor ID: 0 [ 0.000051] CPU: Processor Core ID: 3 [ 0.000054] mce: CPU supports 6 MCE banks [ 0.015581] Brought up 4 CPUs [ 0.016158] Booting paravirtualized kernel on Xen [ 0.016158] Xen version: 4.0.0-rc2-pre (preserve-AD) (dom0) [ 0.016158] Grant tables using version 2 layout. [ 0.016158] Grant table initialized [ 0.016158] Time: 7:58:55 Date: 01/25/10 [ 0.016158] NET: Registered protocol family 16 [ 0.016185] xenbus_probe_init ok [ 0.017032] ACPI: bus type pci registered [ 0.017057] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.017057] PCI: Not using MMCONFIG. [ 0.0057] PCI: Using configuration type 1 for base access [ 0.029231] bio: create slab at 0 [ 0.046830] ACPI: Interpreter enabled [ 0.046840] ACPI: (supports S0 S1 S3 S4 S5) [ 0.046880] ACPI: Using IOAPIC for interrupt routing [ 0.046941] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.050434] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.099984] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.113155] ACPI Warning: Incorrect checksum in table [OEMB] - 93, should be 8A 20090521 tbutils-246 [ 0.114151] ACPI Warning: Incorrect checksum in table [ ] - 96, should be DA 20090521 tbutils-246 [ 0.114356] ACPI: No dock devices found. [ 0.114541] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.114596] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.114596] pci 0000:00:01.0: PME# disabled [ 0.114596] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.114596] pci 0000:00:03.0: PME# disabled [ 0.115213] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.115222] pci 0000:00:19.0: PME# disabled [ 0.115857] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.115866] pci 0000:00:1a.7: PME# disabled [ 0.115982] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.115982] pci 0000:00:1b.0: PME# disabled [ 0.116087] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.116095] pci 0000:00:1c.0: PME# disabled [ 0.116223] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.116231] pci 0000:00:1c.4: PME# disabled [ 0.116875] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.116884] pci 0000:00:1d.7: PME# disabled [ 0.117205] pci 0000:00:1f.2: PME# supported from D3hot [ 0.117213] pci 0000:00:1f.2: PME# disabled [ 0.117982] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.117982] pci 0000:02:00.0: PME# disabled [ 0.118238] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot [ 0.118247] pci 0000:04:03.0: PME# disabled [ 0.118335] pci 0000:00:1e.0: transparent bridge (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:19.0 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.2 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1b.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.4 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 01:00.0 (XEN) PCI add device 01:00.1 (XEN) PCI add device 02:00.0 (XEN) PCI add device 04:03.0 [ 0.142083] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.142228] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.142370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.143099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.143241] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.143383] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.143529] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.143677] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.144036] xenbus_probe_backend_init bus registered ok [ 0.144036] xenbus_probe_frontend_init bus registered ok [ 0.144036] xen_balloon: Initialising balloon driver with page order 0. [ 0.144095] SCSI subsystem initialized [ 0.145034] usbcore: registered new interface driver usbfs [ 0.145034] usbcore: registered new interface driver hub [ 0.145034] usbcore: registered new device driver usb [ 0.145034] PCI: Using ACPI for IRQ routing [ 0.145126] IO APIC resources couldn't be allocated. [ 0.164041] cfg80211: Using static regulatory domain info [ 0.164041] cfg80211: Regulatory domain: US [ 0.164041] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.164041] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.164041] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.164041] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.164041] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.164041] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.164041] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.164051] cfg80211: Calling CRDA for country: US [ 0.164079] NetLabel: Initializing [ 0.164079] NetLabel: domain hash size = 128 [ 0.164079] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.164079] NetLabel: unlabeled traffic allowed by default [ 0.171022] pnp: PnP ACPI init [ 0.171038] ACPI: bus type pnp registered [ 0.171614] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.171622] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.171796] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.171803] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.172604] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.172611] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.174604] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.174611] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 (XEN) io_apic.c:2291: (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 (XEN) ioapic_guest_write: new_entry=00000904 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! [ 0.175041] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.175048] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.175240] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.175247] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.176541] pnp: PnP ACPI: found 18 devices [ 0.176546] ACPI: ACPI bus type pnp unregistered [ 0.176558] system 00:01: iomem ra[ 1.037088] ata2: SATA link down (SStatus 0 SControl 300) [ 1.047454] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 1.353087] ata3: SATA link down (SStatus 0 SControl 300) [ 1.669140] ata4: SATA link down (SStatus 0 SControl 300) [ 1.985140] ata5: SATA link down (SStatus 0 SControl 300) [ 2.301141] ata6: SATA link down (SStatus 0 SControl 300) [ 2.312227] Freeing unused kernel memory: 568k freed [ 2.312413] Write protecting the kernel read-only data: 9228k Loading, please wait... Couldnt get a file descriptor referring to the console KDGKBMODE: Bad file descriptor loadkeys: error reading keyboard mode Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... kinit: name_to_dev_t(/dev/sda5) = dev(8,5) kinit: trying to resume from /dev/sda5 [ 3.012833] PM: Starting manual resume from disk kinit: No resume image, doing normal boot... resume: libgcrypt version: 1.4.1 done. [ 3.083339] kjournald starting. Commit interval 5 seconds [ 3.083368] EXT3-fs: mounted filesystem with writeback data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.24: No such file or directory INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd[ 4.553991] udevd version 125 started . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Setting the system clock. Activating swap...[ 6.979264] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k done. Checking root file system...fsck 1.41.3 (12-Oct-2008) /dev/sda1: clean, 1168912/4685824 files, 12405005/18729774 blocks done. [ 7.243893] EXT3 FS on sda1, internal journal Setting the system clock. Cleaning up ifupdown.... Loading kernel modules...done. Checking file systems...fsck 1.41.3 (12-Oct-2008) done. Setting kernel variables (/etc/sysctl.conf)...done. Mounting local filesystems...done. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...done. Initializing IP Masquerading...done. Loading IP Masquerade kernel modules...done. Setting sensors limits[ 9.897393] ADDRCONF(NETDEV_UP): eth1: link is not ready . Setting console screen modes and fonts. INIT: Entering runlevel: 2 Starting enhanced syslogd: rsyslogd. Starting ACPI services.... Starting system message bus: dbus. [ 11.596951] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 11.596965] 0000:00:19.0: eth1: 10/100 speed: disabling TSO [ 11.597100] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Starting OpenBSD Secure Shell server: sshd. Starting MTA: exim4. Your system does not have the CPU extensions required to use KVM. Not doing anything. failed! Setting sysfs variables.... RTNETLINK answers: File exists [ 16.359849] xenbus_probe wake_waiting [ 16.359875] xenbus_probe wake_waiting [ 16.360196] XENBUS: Unable to read cpu state [ 16.360405] XENBUS: Unable to read cpu state [ 16.360556] XENBUS: Unable to read cpu state [ 16.360705] XENBUS: Unable to read cpu state [ 16.360968] xenbus_probe_devices backend [ 16.361147] xenbus_probe_devices failed xenbus_directory [ 16.361153] backend_probe_and_watch devices probed ok [ 16.362268] backend_probe_and_watch watch add ok ok [ 16.362275] backend_probe_and_watch all done [ 16.362281] xenbus_probe_devices device [ 16.362423] xenbus_probe_devices failed xenbus_directory [ 16.362428] frontend_probe_and_watch devices probed ok [ 16.362556] frontend_probe_and_watch watch add ok ok [ 16.362561] frontend_probe_and_watch all done RTNETLINK answers: File exists Restoring Xen domains: linhvm An error occurred while restoring domain linhvm: Error: not a valid guest state file: config size read ! winhvm An error occurred while restoring domain winhvm: Error: not a valid guest state file: config size read ! [done]. Starting Hardware abstraction layer: hald. Starting deferred execution scheduler: atd. Starting periodic command scheduler: crond. Debian GNU/Linux 5.0 xentest hvc0 xentest login: