Script started on Fri Feb 19 15:16:45 2010 .zshenv - rev 10 .zshrc - rev 10 .dircolors - rev 3  2010-02-19 15:16:45 dev=pts/3 ret=0 hist=114 [root@scatha]#  ~ !!cucu --line /dev/ttyS0 --speed 19200 Connected. __ __ _____ _ _ ____ \ \/ /___ _ __ |___ /| || | |___ \ \ // _ \ '_ \ |_ \| || |_ __) | / \ __/ | | | ___) |__ _| / __/ /_/\_\___|_| |_| |____(_) |_|(_)_____| (XEN) Xen version 3.4.2 (@localdomain) (gcc version 3.4.6) Thu Jan 21 19:00:29 EST 2010 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Command line: dom0_vcpus_pin loglvl=all guest_loglvl=all sync_console console_to_ring com1=19200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007ec00000 (usable) (XEN) 000000007ec00000 - 000000007ed4b000 (ACPI NVS) (XEN) 000000007ed4b000 - 000000007fea2000 (usable) (XEN) 000000007fea2000 - 000000007fee9000 (ACPI NVS) (XEN) 000000007fee9000 - 000000007feed000 (usable) (XEN) 000000007feed000 - 000000007feff000 (ACPI data) (XEN) 000000007feff000 - 000000007ff00000 (usable) (XEN) System RAM: 2044MB (2094060kB) (XEN) ACPI: RSDP 000FE020, 0014 (r0 INTEL ) (XEN) ACPI: RSDT 7FEFDE48, 004C (r1 INTEL D975XBX 518 MSFT 1000013) (XEN) ACPI: FACP 7FEFCF10, 0074 (r1 INTEL D975XBX 518 MSFT 1000013) (XEN) ACPI: DSDT 7FEF8010, 3E80 (r1 INTEL D975XBX 518 MSFT 1000013) (XEN) ACPI: FACS 7FEDFC40, 0040 (XEN) ACPI: APIC 7FEFCE10, 0078 (r1 INTEL D975XBX 518 MSFT 1000013) (XEN) ACPI: WDDT 7FEF7F90, 0040 (r1 INTEL D975XBX 518 MSFT 1000013) (XEN) ACPI: MCFG 7FEF7F10, 003C (r1 INTEL D975XBX 518 MSFT 1000013) (XEN) ACPI: ASF! 7FEFCD10, 00A6 (r32 INTEL D975XBX 518 MSFT 1000013) (XEN) ACPI: SSDT 7FEFDC10, 01BC (r1 INTEL CpuPm 518 MSFT 1000013) (XEN) ACPI: SSDT 7FEFDA10, 0175 (r1 INTEL Cpu0Ist 518 MSFT 1000013) (XEN) ACPI: SSDT 7FEFD810, 0175 (r1 INTEL Cpu1Ist 518 MSFT 1000013) (XEN) ACPI: SSDT 7FEFD610, 0175 (r1 INTEL Cpu2Ist 518 MSFT 1000013) (XEN) ACPI: SSDT 7FEFD410, 0175 (r1 INTEL Cpu3Ist 518 MSFT 1000013) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-000000007ff00000 (XEN) Xen heap: 9MB (9768kB) (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fe680 (XEN) DMI 2.3 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[7fedfc4c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2400.160 MHz processor. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 4096K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - MSR direct-access bitmap (XEN) HVM: VMX enabled (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU0 has no CMCI support (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 (XEN) Booting processor 1/1 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 4096K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) mce_init: init bank1 (XEN) mce_init: init bank2 (XEN) mce_init: init bank4 (XEN) mce_init: init bank5 (XEN) CPU1: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 3.579MHz ACPI PM Timer (XEN) Brought up 2 CPUs (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) I/O virtualisation disabled (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x400000 -> 0xa55000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (476456 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0400000->c0a55000 (XEN) Init. ramdisk: c0a55000->c0e68200 (XEN) Phys-Mach map: c0e69000->c10424a0 (XEN) Start info: c1043000->c104347c (XEN) Page tables: c1044000->c1053000 (XEN) Boot stack: c1053000->c1054000 (XEN) TOTAL: c0000000->c1400000 (XEN) ENTRY ADDRESS: c0817000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 124kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) io_apic.c:2126: (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1 (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900 (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! (XEN) io_apic.c:2126: (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900 (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0 (XEN) ioapic_guest_write: old_entry=00010900, new_entry=000009f0 (XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ! (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo 6 hi 0 (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo 6 hi 0 (XEN) mce_intel.c:935:d0 MCE: rd MCG_STATUS lo 0 hi 0 (XEN) mce_intel.c:981:d0 MCE: rd MC0_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC1_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC2_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC3_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC4_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC5_STATUS (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo 6 hi 0 (XEN) mce_intel.c:901:d0 MCE: wr MC1_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC2_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC3_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC4_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC5_STATUS 0 (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo 6 hi 0 (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo 6 hi 0 (XEN) mce_intel.c:935:d0 MCE: rd MCG_STATUS lo 0 hi 0 (XEN) mce_intel.c:981:d0 MCE: rd MC0_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC1_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC2_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC3_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC4_STATUS (XEN) mce_intel.c:981:d0 MCE: rd MC5_STATUS (XEN) mce_intel.c:940:d0 MCE: rdmsr MCG_CAP lo 6 hi 0 (XEN) mce_intel.c:901:d0 MCE: wr MC1_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC2_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC3_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC4_STATUS 0 (XEN) mce_intel.c:901:d0 MCE: wr MC5_STATUS 0 [ 0.388030] xenbus_probe_init ok (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:1b.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.4 (XEN) PCI add device 00:1c.5 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.3 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.1 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 01:00.0 (XEN) PCI add device 04:00.0 (XEN) PCI add device 05:00.0 (XEN) PCI add device 05:02.0 (XEN) PCI add device 05:04.0 (XEN) PCI add device 05:05.0 [ 0.457023] xenbus_probe_backend_init bus registered ok [ 0.457981] xenbus_probe_frontend_init bus registered ok [ 0.460224] IO APIC resources couldn't be allocated. [ 0.524460] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.525005] pciback 0000:05:02.0: BAR 6: address space collision on of device [0xfff80000-0xffffffff] (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: (XEN) _PPC: 0 (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=2 (XEN) State0: 2394MHz 89000mW 10us 10us 0x928 0x928 (XEN) State1: 1596MHz 56960mW 10us 10us 0x61b 0x61b (XEN) _PSD: num_entries=5 rev=0 domain=1 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 0 initialization completed (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: (XEN) _PPC: 0 (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=2 (XEN) State0: 2394MHz 89000mW 10us 10us 0x928 0x928 (XEN) State1: 1596MHz 56960mW 10us 10us 0x61b 0x61b (XEN) _PSD: num_entries=5 rev=0 domain=2 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 1 initialization completed [ 1.709348] registering netback (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=23, old_irq=23, new_irq=23 (XEN) ioapic_guest_write: old_entry=0000a9d0, new_entry=0001a9d0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! Red Hat nash version 5.0.32 starting (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=18, old_irq=18, new_irq=18 (XEN) ioapic_guest_write: old_entry=0000a9c0, new_entry=0001a9c0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19 (XEN) ioapic_guest_write: old_entry=0000a9d8, new_entry=0001a9d8 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 6 logical volume(s) in volume group "VolGroup00" now active INIT: version 2.86 booting Welcome to Sim/Stim Linux Press 'I' to enter interactive startup. Setting clock (utc): Fri Feb 19 15:20:29 UTC 2010 [ OK ] Starting udev: (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19 (XEN) ioapic_guest_write: old_entry=0000a9d8, new_entry=0001a9d8 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=16, old_irq=16, new_irq=16 (XEN) ioapic_guest_write: old_entry=0000a990, new_entry=0001a990 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! udevd-event[1598]: wait_for_sysfs: waiting for '/sys/devices/platform/parport_pc.956/bus' failed udevd-event[1599]: wait_for_sysfs: waiting for '/sys/devices/platform/parport_pc.888/bus' failed udevd-event[1600]: wait_for_sysfs: waiting for '/sys/devices/platform/parport_pc.632/bus' failed [ OK ] Setting hostname melkor: [ OK ] mdadm: No arrays found in config file Setting up Logical Volume Management: 6 logical volume(s) in volume group "VolGroup00" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 /dev/VolGroup00/LogVol00: clean, 156891/1310720 files, 1421215/2621440 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 63/26208 files, 54573/104420 blocks [/sbin/fsck.ext3 (1) -- /opt] fsck.ext3 -a /dev/VolGroup00/LogVol01 /dev/VolGroup00/LogVol01: clean, 40768/1310720 files, 956540/2621440 blocks [/sbin/fsck.ext3 (1) -- /scrap] fsck.ext3 -a /dev/VolGroup00/LogVol03 /dev/VolGroup00/LogVol03: clean, 72141/1310720 files, 1338997/2621440 blocks [/sbin/fsck.ext3 (1) -- /vm] fsck.ext3 -a /dev/VolGroup00/LogVol02 /dev/VolGroup00/LogVol02: clean, 24/131072 files, 14855/262144 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting readahead_early: Starting background readahead: [ OK ] [ OK ] FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.31.6-mdl4/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko): No such device Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting mdmonitor: [ OK ] Starting RPC idmapd: [ OK ] Mounting other filesystems: [ OK ] Binding to the NIS domain: [ OK ] Listening for an NIS domain server. Starting automount: [ OK ] Starting smartd: [ OK ] Starting acpi daemon: [ OK ] Starting sshd:WARNING: initlog is deprecated and will be removed in a future release [ OK ] ntpd: Synchronizing with time server: [ OK ] Starting ntpd: [ OK ] Starting UPS monitoring:[ OK ] Starting MySQL. SUCCESS! Starting /usr/local/sbin/xinetd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting httpd: [ OK ] Starting crond: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting system message bus: [ OK ] Starting xend: [ 41.618822] Bridge firewalling registered Nothing to flush. [ 51.207965] xenbus_probe wake_waiting [ 51.229613] xenbus_probe wake_waiting [ 51.261440] XENBUS: Unable to read cpu state [ 51.287502] XENBUS: Unable to read cpu state [ 51.315202] xenbus_probe_devices backend [ 51.533329] xenbus_probe_devices failed xenbus_directory [ 51.534017] backend_probe_and_watch devices probed ok [ 51.595685] backend_probe_and_watch watch add ok ok [ 51.596197] backend_probe_and_watch all done [ 51.596197] xenbus_probe_devices device [ 51.674577] xenbus_probe_devices failed xenbus_directory [ 51.675526] frontend_probe_and_watch devices probed ok [ 51.737815] frontend_probe_and_watch watch add ok ok [ 51.738767] frontend_probe_and_watch all done [ OK ] Starting HAL daemon: [ OK ] Initializing managerd: [ OK ] Starting PowerChute Network Shutdown agent: [ OK ] Starting cups: [ OK ] cups: started scheduler. [ OK ] Initializing xenautoblockd: PowerChute network shutdown Copyright 2000 American Power Conversion [ OK ] I am now going to start my domU with the PCI card [ 120.770730] pciback 0000:05:02.0: enabling permissive mode configuration space accesses! [ 120.771007] pciback 0000:05:02.0: permissive mode is potentially unsafe! [ 121.136995] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. (XEN) io_apic.c:2139: (XEN) ioapic_guest_write: apic=0, pin=18, old_irq=18, new_irq=18 (XEN) ioapic_guest_write: old_entry=0000a9c0, new_entry=0001a9c0 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! (XEN) irq.c:683:d1 Cannot bind IRQ 18 to guest. Will not share with others. (XEN) irq.c:683:d1 Cannot bind IRQ 18 to guest. Will not share with others. I am now about to access the PCI card... [ 216.913086] irq 18: nobody cared (try booting with the "irqpoll" option) [ 216.914080] Pid: 0, comm: swapper Not tainted 2.6.31.6-mdl4 #1 [ 216.914080] Call Trace: [ 216.914080] [] __report_bad_irq+0x2e/0x6f [ 216.914080] [] note_interrupt+0xf5/0x14d [ 216.914080] [] handle_level_irq+0x78/0xae [ 216.914080] [] ? handle_level_irq+0x0/0xae [ 216.914080] [] ? xen_evtchn_do_upcall+0xc0/0x13f [ 216.914080] [] ? xen_do_upcall+0x7/0xc [ 216.914080] [] ? xen_safe_halt+0x12/0x1f [ 216.914080] [] ? xen_idle+0x27/0x38 [ 216.914080] [] ? cpu_idle+0x49/0x62 [ 216.914080] [] ? rest_init+0x53/0x55 [ 216.914080] [] ? start_kernel+0x2c8/0x2cd [ 216.914080] [] ? i386_start_kernel+0x70/0x77 [ 216.914080] [] ? xen_start_kernel+0x53e/0x546 [ 216.914080] handlers: [ 216.914080] [] (usb_hcd_irq+0x0/0x6a) [ 216.914080] Disabling IRQ #18 [ 248.701091] ata1: lost interrupt (Status 0x51) [ 249.704058] ------------[ cut here ]------------ [ 249.705030] WARNING: at net/sched/sch_generic.c:246 dev_watchdog+0xb9/0x10f() [ 249.705030] Hardware name: [ 249.705030] Modules linked in: xt_physdev bridge stp ipv6 autofs4 sunrpc video output sbs sbshc pci_slot lp firewire_ohci firewire_core crc_itu_t sg snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_seq_dummy snd_seq_oss he nouveau snd_seq_midi_event snd_seq snd_seq_device sr_mod atm ttm cdrom snd_pcm_oss e1000e snd_mixer_oss drm_kms_helper drm serio_raw i2c_i801 snd_pcm i2c_algo_bit i2c_core ata_generic snd_timer pata_acpi snd pcspkr soundcore snd_page_alloc i82975x_edac edac_core parport_pc parport dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod ext3 mbcache jbd sata_sil ahci ata_piix libata sd_mod scsi_mod [ 249.705030] Pid: 0, comm: swapper Not tainted 2.6.31.6-mdl4 #1 [ 249.705030] Call Trace: [ 249.705030] [] warn_slowpath_common+0x65/0x7c [ 249.705030] [] ? dev_watchdog+0xb9/0x10f [ 249.705030] [] warn_slowpath_fmt+0x24/0x27 [ 249.705030] [] dev_watchdog+0xb9/0x10f [ 249.705030] [] ? __xen_spin_lock+0xcb/0xdf [ 249.705030] [] ? rh_timer_func+0x0/0xa [ 249.705030] [] ? xen_spin_lock+0xa/0xc [ 249.705030] [] ? dev_watchdog+0x0/0x10f [ 249.705030] [] run_timer_softirq+0x14e/0x1b2 [ 249.705030] [] __do_softirq+0xac/0x154 [ 249.705030] [] ? __do_softirq+0x0/0x154 [ 249.705030] [] ? irq_exit+0x29/0x57 [ 249.705030] [] ? xen_evtchn_do_upcall+0x12e/0x13f [ 249.705030] [] ? xen_do_upcall+0x7/0xc [ 249.705030] [] ? hypercall_page+0x3a7/0x1005 [ 250.600447] [] ? xen_safe_halt+0x12/0x1f [ 250.600447] [] ? xen_idle+0x27/0x38 [ 250.600447] [] ? cpu_idle+0x49/0x62 [ 250.600447] [] ? rest_init+0x53/0x55 [ 250.600447] [] ? start_kernel+0x2c8/0x2cd [ 250.600447] [] ? i386_start_kernel+0x70/0x77 [ 250.600447] [] ? xen_start_kernel+0x53e/0x546 [ 250.600447] ---[ end trace f21c48881c094d9b ]--- [ 253.727129] ata1.00: qc timeout (cmd 0xa0) [ 253.728052] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 253.728052] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 253.728052] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 253.728052] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) [ 253.728052] ata1.00: status: { DRDY ERR } [ 259.101111] ata1.00: qc timeout (cmd 0xa0) [ 259.102052] ata1.00: TEST_UNIT_READY failed (err_mask=0x5) [ 264.318113] ata1.00: qc timeout (cmd 0xa0) [ 264.319052] ata1.00: TEST_UNIT_READY failed (err_mask=0x5) [ 264.375008] ata1.00: limiting speed to UDMA/33:PIO3 [ 269.535111] ata1.00: qc timeout (cmd 0xa0) [ 269.559008] ata1.00: TEST_UNIT_READY failed (err_mask=0x5) [ 269.559008] ata1.00: disabled ho d[ 277.701083] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen [ 277.702035] ata4.00: cmd 61/08:00:d8:9c:3e/00:00:01:00:00/40 tag 0 ncq 4096 out [ 277.702035] res 40/00:00:e0:b5:23/00:00:00:00:00/40 Emask 0x4 (timeout) [ 277.702035] ata4.00: status: { DRDY } e [ 283.156131] ata4.00: qc timeout (cmd 0xec) [ 283.157095] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 283.157095] ata4.00: revalidation failed (errno=-5) ~. Disconnected.  2010-02-19 15:25:28 dev=pts/3 ret=0 hist=114 [root@scatha]#  ~   2010-02-19 15:25:28 dev=pts/3 ret=0 hist=114 [root@scatha]#  ~ eexit Script done on Fri Feb 19 15:25:30 2010