domid: 3 config qemu network with xen bridge for tap3.0 xenbr0 Using file /home/thomas/vmimg/winxp.bin in read-write mode Using file /mnt/Setups/WinXPwSP2/winxpwsp2.iso in read-only mode Watching /local/domain/0/device-model/3/logdirty/cmd Watching /local/domain/0/device-model/3/command char device redirected to /dev/pts/1 qemu_map_cache_init nr_buckets = 10000 size 4194304 shared page at pfn feffd buffered io page at pfn feffb Guest uuid = a8596335-a56b-3299-f6df-174499b9283a Time offset set 0 Register xen platform. Done register platform. platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt): read error xs_read(): vncpasswd get error. /vm/a8596335-a56b-3299-f6df-174499b9283a/vncpasswd. medium change watch on `hdc' (index: 1): /mnt/Setups/WinXPwSP2/winxpwsp2.iso I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 Log-dirty: no command yet. I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 xs_read(/local/domain/3/log-throttling): read error qemu: ignoring not-understood drive `/local/domain/3/log-throttling' medium change watch on `/local/domain/3/log-throttling' - unknown device, ignored dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 01:00.0 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x1:0x0.0x0 pt_register_regions: IO region registered (size=0x01000000 base_addr=0xf6000000) pt_register_regions: IO region registered (size=0x10000000 base_addr=0xe000000c) pt_register_regions: IO region registered (size=0x01000000 base_addr=0xf5000004) pt_register_regions: IO region registered (size=0x00000080 base_addr=0x0000ac01) pt_register_regions: Expansion ROM registered (size=0x00020000 base_addr=0xf7ae0002) gfx_claim_vga_cycle: bridge for bus 10, previous bridge control is 2 gfx_claim_vga_cycle: bus=0x0, dev=0x1e, func=0x0 gfx_claim_vga_cycle: bridge for bus 10, updated bridge control is 2 gfx_claim_vga_cycle: bridge for bus 1, previous bridge control is 1a gfx_claim_vga_cycle: bus=0x0, dev=0x3, func=0x0 gfx_claim_vga_cycle: bridge for bus 1, updated bridge control is 1a gfx_claim_vga_cycle: previous igd control is d1 gfx_claim_vga_cycle: updated igd control is d3 pt_msi_setup: msi mapped with pirq 37 pci_intx: intx=1 register_real_device: Real physical device 01:00.0 registered successfuly! IRQ type = MSI-INTx dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 00:1a.0 ... register_real_device: Enable MSI translation via per device option register_real_device: Disable power management pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x1a.0x0 pt_register_regions: IO region registered (size=0x00000400 base_addr=0xf4ffe000) pci_intx: intx=1 register_real_device: Real physical device 00:1a.0 registered successfuly! IRQ type = INTx pt_bar_reg_read: first read BARs of gfx pt_iomem_map: e_phys=f6000000 maddr=f6000000 type=0 len=16777216 index=0 first_map=1 pt_bar_reg_read: first read BARs of gfx pt_iomem_map: e_phys=e0000000 maddr=e0000000 type=8 len=268435456 index=1 first_map=1 pt_bar_reg_read: first read BARs of gfx pt_bar_reg_read: first read BARs of gfx pt_iomem_map: e_phys=f5000000 maddr=f5000000 type=0 len=16777216 index=3 first_map=1 pt_bar_reg_read: first read BARs of gfx pt_bar_reg_read: first read BARs of gfx pt_ioport_map: e_phys=ac00 pio_base=ac00 len=128 index=5 first_map=1 pt_iomem_map: e_phys=f1000000 maddr=f4ffe000 type=0 len=4096 index=0 first_map=1 platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state. pt_iomem_map: e_phys=ffffffff maddr=f6000000 type=0 len=16777216 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=e0000000 type=8 len=268435456 index=1 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f5000000 type=0 len=16777216 index=3 first_map=0 pt_ioport_map: e_phys=ffff pio_base=ac00 len=128 index=5 first_map=0 pt_iomem_map: e_phys=f6000000 maddr=f6000000 type=0 len=16777216 index=0 first_map=0 pt_iomem_map: e_phys=e0000000 maddr=e0000000 type=8 len=268435456 index=1 first_map=0 pt_iomem_map: e_phys=f5000000 maddr=f5000000 type=0 len=16777216 index=3 first_map=0 pt_ioport_map: e_phys=ac00 pio_base=ac00 len=128 index=5 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f4ffe000 type=0 len=4096 index=0 first_map=0 pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:06.0][Offset:30h][Length:4] pt_iomem_map: e_phys=f1000000 maddr=f4ffe000 type=0 len=4096 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f4ffe000 type=0 len=4096 index=0 first_map=0 pt_iomem_map: e_phys=f1000000 maddr=f4ffe000 type=0 len=4096 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f6000000 type=0 len=16777216 index=0 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=e0000000 type=8 len=268435456 index=1 first_map=0 pt_iomem_map: e_phys=ffffffff maddr=f5000000 type=0 len=16777216 index=3 first_map=0 pt_ioport_map: e_phys=ffff pio_base=ac00 len=128 index=5 first_map=0 pt_iomem_map: e_phys=f6000000 maddr=f6000000 type=0 len=16777216 index=0 first_map=0 pt_iomem_map: e_phys=e0000000 maddr=e0000000 type=8 len=268435456 index=1 first_map=0 pt_iomem_map: e_phys=f5000000 maddr=f5000000 type=0 len=16777216 index=3 first_map=0 pt_ioport_map: e_phys=ac00 pio_base=ac00 len=128 index=5 first_map=0