[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.15 (root@thomas-server) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #4 SMP Fri Jun 18 11:48:33 CEST 2010 [ 0.000000] Command line: nopat root=/dev/sdc2 ro console=tty0 xen-pciback.hide=(00:1a.0)(00:1b.0)(01:00.0) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn e0000-f4010: 81936 pages freed [ 0.000000] released 81936 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] Xen: 000000000009fc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000dfe70000 (usable) [ 0.000000] Xen: 00000000dfe70000 - 00000000dfe88000 (ACPI data) [ 0.000000] Xen: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS) [ 0.000000] Xen: 00000000dfedc000 - 00000000e0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] PAT support disabled. [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfe70 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfe70000 (usable) [ 0.000000] modified: 00000000dfe70000 - 00000000dfe88000 (ACPI data) [ 0.000000] modified: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS) [ 0.000000] modified: 00000000dfedc000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe70000 [ 0.000000] 0000000000 - 00dfe70000 page 4k [ 0.000000] kernel direct mapping tables up to dfe70000 @ 100000-805000 [ 0.000000] RAMDISK: 01a52000 - 0f248200 [ 0.000000] ACPI: RSDP 00000000000fb920 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000dfe70100 0006C (v01 052110 XSDT1101 20100521 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dfe70290 000F4 (v03 052110 FACP1101 20100521 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dfe704a0 0EEF9 (v01 A1511 A1511001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000dfe88000 00040 [ 0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 052110 APIC1101 20100521 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 052110 OEMMCFG 20100521 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 052110 OEMB1101 20100521 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dfe7f3a0 00038 (v01 052110 OEMHPET 20100521 MSFT 00000097) [ 0.000000] ACPI: 00000000dfe880c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: ASPT 00000000dfe7f640 00034 (v06 052110 PerfTune 20100521 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000dfe7f680 000B0 (v01 052110 OEMOSFR 20100521 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000dfe8ac00 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000dfe70000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000dfe70000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000014fff] [ 0.000000] bootmap [0000000000015000 - 0000000000030fcf] pages 1c [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00dfe70000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000f9eb000 - 000fa6c000] XEN PAGETABLES ==> [000f9eb000 - 000fa6c000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001a318a4] TEXT DATA BSS ==> [0001000000 - 0001a318a4] [ 0.000000] #4 [0001a52000 - 000f248200] RAMDISK ==> [0001a52000 - 000f248200] [ 0.000000] #5 [000f249000 - 000f9eb000] XEN START INFO ==> [000f249000 - 000f9eb000] [ 0.000000] #6 [0001a32000 - 0001a322c0] BRK ==> [0001a32000 - 0001a322c0] [ 0.000000] #7 [0000100000 - 0000781000] PGTABLE ==> [0000100000 - 0000781000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfe70 [ 0.000000] On node 0 totalpages: 916991 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1668 pages reserved [ 0.000000] DMA zone: 2259 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12483 pages used for memmap [ 0.000000] DMA32 zone: 900525 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1-rc3-pre (preserve-AD) (dom0) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fa8b000 s91416 r8192 d23272 u122880 [ 0.000000] pcpu-alloc: s91416 r8192 d23272 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.211216] trying to map vcpu_info 0 at ffff88000fa96020, mfn 10fa96, offset 32 [ 0.211219] cpu 0 using vcpu_info at ffff88000fa96020 [ 0.211221] trying to map vcpu_info 1 at ffff88000fab4020, mfn 10fab4, offset 32 [ 0.211223] cpu 1 using vcpu_info at ffff88000fab4020 [ 0.211225] trying to map vcpu_info 2 at ffff88000fad2020, mfn 10fad2, offset 32 [ 0.211227] cpu 2 using vcpu_info at ffff88000fad2020 [ 0.211229] trying to map vcpu_info 3 at ffff88000faf0020, mfn 10faf0, offset 32 [ 0.211231] cpu 3 using vcpu_info at ffff88000faf0020 [ 0.211233] trying to map vcpu_info 4 at ffff88000fb0e020, mfn 10fb0e, offset 32 [ 0.211235] cpu 4 using vcpu_info at ffff88000fb0e020 [ 0.211237] trying to map vcpu_info 5 at ffff88000fb2c020, mfn 10fb2c, offset 32 [ 0.211239] cpu 5 using vcpu_info at ffff88000fb2c020 [ 0.211240] trying to map vcpu_info 6 at ffff88000fb4a020, mfn 10fb4a, offset 32 [ 0.211243] cpu 6 using vcpu_info at ffff88000fb4a020 [ 0.211244] trying to map vcpu_info 7 at ffff88000fb68020, mfn 10fb68, offset 32 [ 0.211247] cpu 7 using vcpu_info at ffff88000fb68020 [ 0.211248] Xen: using vcpu_info placement [ 0.211252] Built 1 zonelists in Node order, mobility grouping on. Total pages: 902784 [ 0.211254] Policy zone: DMA32 [ 0.211256] Kernel command line: nopat root=/dev/sdc2 ro console=tty0 xen-pciback.hide=(00:1a.0)(00:1b.0)(01:00.0) [ 0.211279] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.211637] Initializing CPU#0 [ 0.217427] DMA: Placing 64MB software IO TLB between ffff880012f88000 - ffff880016f88000 [ 0.217432] DMA: software IO TLB at phys 0x12f88000 - 0x16f88000 [ 0.217434] xen_swiotlb_fixup: buf=ffff880012f88000 size=67108864 [ 0.239169] xen_swiotlb_fixup: buf=ffff880016fe8000 size=32768 [ 0.250138] Memory: 3303980k/3668416k available (5478k kernel code, 452k absent, 363984k reserved, 2953k data, 892k init) [ 0.250161] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.250186] Hierarchical RCU implementation. [ 0.250193] NR_IRQS:4352 nr_irqs:2304 [ 0.250269] xen: --> irq=0 [ 0.250276] xen: --> irq=1 [ 0.250282] xen: --> irq=2 [ 0.250287] xen: --> irq=3 [ 0.250292] xen: --> irq=4 [ 0.250297] xen: --> irq=5 [ 0.250301] xen: --> irq=6 [ 0.250306] xen: --> irq=7 [ 0.250317] xen: --> irq=8 [ 0.250321] xen: --> irq=9 [ 0.250326] xen: --> irq=10 [ 0.250331] xen: --> irq=11 [ 0.250336] xen: --> irq=12 [ 0.250341] xen: --> irq=13 [ 0.250346] xen: --> irq=14 [ 0.250351] xen: --> irq=15 [ 0.250365] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.250367] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.250370] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.250372] xen: registering gsi 9 triggering 0 polarity 0 [ 0.250374] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.250375] xen: --> irq=9 [ 0.250382] xen: acpi sci 9 [ 0.251451] Console: colour VGA+ 80x25 [ 0.257420] console [tty0] enabled [ 0.263001] allocated 36700160 bytes of page_cgroup [ 0.263054] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.263148] Xen: using vcpuop timer interface [ 0.263144] installing Xen timer for CPU 0 [ 0.263199] alloc irq_desc for 2303 on node 0 [ 0.263203] alloc kstat_irqs on node 0 [ 0.263218] Detected 2808.774 MHz processor. [ 0.263268] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.54 BogoMIPS (lpj=28087740) [ 0.263373] Security Framework initialized [ 0.263420] SELinux: Disabled at boot. [ 0.264173] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.265188] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.265707] Mount-cache hash table entries: 256 [ 0.265859] Initializing cgroup subsys ns [ 0.265906] Initializing cgroup subsys cpuacct [ 0.265953] Initializing cgroup subsys memory [ 0.266003] Initializing cgroup subsys devices [ 0.266048] Initializing cgroup subsys freezer [ 0.266094] Initializing cgroup subsys net_cls [ 0.266166] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.266236] CPU: L2 cache: 256K [ 0.266279] CPU: L3 cache: 8192K [ 0.266324] CPU 0/0x0 -> Node 0 [ 0.266368] CPU: Unsupported number of siblings 16 [ 0.266403] mce: CPU supports 9 MCE banks [ 0.266502] Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only. [ 0.266623] SMP alternatives: switching to UP code [ 0.302197] ACPI: Core revision 20090903 [ 0.422257] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.422307] ftrace: allocating 21630 entries in 85 pages [ 0.427431] alloc irq_desc for 2302 on node 0 [ 0.427433] alloc kstat_irqs on node 0 [ 0.427439] cpu 0 spinlock event irq 2302 [ 0.427486] alloc irq_desc for 2301 on node 0 [ 0.427488] alloc kstat_irqs on node 0 [ 0.427492] alloc irq_desc for 2300 on node 0 [ 0.427494] alloc kstat_irqs on node 0 [ 0.427498] alloc irq_desc for 2299 on node 0 [ 0.427500] alloc kstat_irqs on node 0 [ 0.427505] alloc irq_desc for 2298 on node 0 [ 0.427507] alloc kstat_irqs on node 0 [ 0.427662] installing Xen timer for CPU 1 [ 0.427709] alloc irq_desc for 2297 on node 0 [ 0.427711] alloc kstat_irqs on node 0 [ 0.427716] alloc irq_desc for 2296 on node 0 [ 0.427718] alloc kstat_irqs on node 0 [ 0.427722] cpu 1 spinlock event irq 2296 [ 0.427786] SMP alternatives: switching to SMP code [ 0.460903] alloc irq_desc for 2295 on node 0 [ 0.460905] alloc kstat_irqs on node 0 [ 0.460917] alloc irq_desc for 2294 on node 0 [ 0.460919] alloc kstat_irqs on node 0 [ 0.460923] alloc irq_desc for 2293 on node 0 [ 0.460925] alloc kstat_irqs on node 0 [ 0.460931] alloc irq_desc for 2292 on node 0 [ 0.460933] alloc kstat_irqs on node 0 [ 0.000007] Initializing CPU#1 [ 0.000041] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000043] CPU: L2 cache: 256K [ 0.000045] CPU: L3 cache: 8192K [ 0.000048] CPU 1/0x0 -> Node 0 [ 0.000049] CPU: Unsupported number of siblings 16 [ 0.461080] installing Xen timer for CPU 2 [ 0.461379] alloc irq_desc for 2291 on node 0 [ 0.461381] alloc kstat_irqs on node 0 [ 0.461385] alloc irq_desc for 2290 on node 0 [ 0.461387] alloc kstat_irqs on node 0 [ 0.461391] cpu 2 spinlock event irq 2290 [ 0.461452] alloc irq_desc for 2289 on node 0 [ 0.461453] alloc kstat_irqs on node 0 [ 0.461458] alloc irq_desc for 2288 on node 0 [ 0.461460] alloc kstat_irqs on node 0 [ 0.461464] alloc irq_desc for 2287 on node 0 [ 0.461466] alloc kstat_irqs on node 0 [ 0.461470] alloc irq_desc for 2286 on node 0 [ 0.461471] alloc kstat_irqs on node 0 [ 0.000006] Initializing CPU#2 [ 0.000038] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000040] CPU: L2 cache: 256K [ 0.000041] CPU: L3 cache: 8192K [ 0.000044] CPU 2/0x0 -> Node 0 [ 0.000046] CPU: Unsupported number of siblings 16 [ 0.461605] installing Xen timer for CPU 3 [ 0.462448] alloc irq_desc for 2285 on node 0 [ 0.462450] alloc kstat_irqs on node 0 [ 0.462455] alloc irq_desc for 2284 on node 0 [ 0.462457] alloc kstat_irqs on node 0 [ 0.462461] cpu 3 spinlock event irq 2284 [ 0.462520] alloc irq_desc for 2283 on node 0 [ 0.462522] alloc kstat_irqs on node 0 [ 0.462527] alloc irq_desc for 2282 on node 0 [ 0.462529] alloc kstat_irqs on node 0 [ 0.462533] alloc irq_desc for 2281 on node 0 [ 0.462535] alloc kstat_irqs on node 0 [ 0.462539] alloc irq_desc for 2280 on node 0 [ 0.462540] alloc kstat_irqs on node 0 [ 0.000006] Initializing CPU#3 [ 0.000037] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000039] CPU: L2 cache: 256K [ 0.000041] CPU: L3 cache: 8192K [ 0.000044] CPU 3/0x0 -> Node 0 [ 0.000045] CPU: Unsupported number of siblings 16 [ 0.462675] installing Xen timer for CPU 4 [ 0.462973] alloc irq_desc for 2279 on node 0 [ 0.462975] alloc kstat_irqs on node 0 [ 0.462979] alloc irq_desc for 2278 on node 0 [ 0.462981] alloc kstat_irqs on node 0 [ 0.462985] cpu 4 spinlock event irq 2278 [ 0.463045] alloc irq_desc for 2277 on node 0 [ 0.463046] alloc kstat_irqs on node 0 [ 0.463051] alloc irq_desc for 2276 on node 0 [ 0.463053] alloc kstat_irqs on node 0 [ 0.463057] alloc irq_desc for 2275 on node 0 [ 0.463059] alloc kstat_irqs on node 0 [ 0.463063] alloc irq_desc for 2274 on node 0 [ 0.463065] alloc kstat_irqs on node 0 [ 0.000005] Initializing CPU#4 [ 0.000044] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000047] CPU: L2 cache: 256K [ 0.000049] CPU: L3 cache: 8192K [ 0.000053] CPU 4/0x0 -> Node 0 [ 0.000055] CPU: Unsupported number of siblings 16 [ 0.463223] installing Xen timer for CPU 5 [ 0.463522] alloc irq_desc for 2273 on node 0 [ 0.463523] alloc kstat_irqs on node 0 [ 0.463529] alloc irq_desc for 2272 on node 0 [ 0.463530] alloc kstat_irqs on node 0 [ 0.463534] cpu 5 spinlock event irq 2272 [ 0.463594] alloc irq_desc for 2271 on node 0 [ 0.463596] alloc kstat_irqs on node 0 [ 0.463601] alloc irq_desc for 2270 on node 0 [ 0.463603] alloc kstat_irqs on node 0 [ 0.463607] alloc irq_desc for 2269 on node 0 [ 0.463609] alloc kstat_irqs on node 0 [ 0.463613] alloc irq_desc for 2268 on node 0 [ 0.463615] alloc kstat_irqs on node 0 [ 0.000005] Initializing CPU#5 [ 0.000033] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000035] CPU: L2 cache: 256K [ 0.000037] CPU: L3 cache: 8192K [ 0.000039] CPU 5/0x0 -> Node 0 [ 0.000041] CPU: Unsupported number of siblings 16 [ 0.463742] installing Xen timer for CPU 6 [ 0.464041] alloc irq_desc for 2267 on node 0 [ 0.464042] alloc kstat_irqs on node 0 [ 0.464047] alloc irq_desc for 2266 on node 0 [ 0.464049] alloc kstat_irqs on node 0 [ 0.464053] cpu 6 spinlock event irq 2266 [ 0.464113] alloc irq_desc for 2265 on node 0 [ 0.464115] alloc kstat_irqs on node 0 [ 0.464119] alloc irq_desc for 2264 on node 0 [ 0.464121] alloc kstat_irqs on node 0 [ 0.464126] alloc irq_desc for 2263 on node 0 [ 0.464128] alloc kstat_irqs on node 0 [ 0.464131] alloc irq_desc for 2262 on node 0 [ 0.464133] alloc kstat_irqs on node 0 [ 0.000004] Initializing CPU#6 [ 0.000033] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000035] CPU: L2 cache: 256K [ 0.000036] CPU: L3 cache: 8192K [ 0.000039] CPU 6/0x0 -> Node 0 [ 0.000040] CPU: Unsupported number of siblings 16 [ 0.464262] installing Xen timer for CPU 7 [ 0.464561] alloc irq_desc for 2261 on node 0 [ 0.464563] alloc kstat_irqs on node 0 [ 0.464570] alloc irq_desc for 2260 on node 0 [ 0.464572] alloc kstat_irqs on node 0 [ 0.464576] cpu 7 spinlock event irq 2260 [ 0.464635] alloc irq_desc for 2259 on node 0 [ 0.464639] alloc kstat_irqs on node 0 [ 0.464644] alloc irq_desc for 2258 on node 0 [ 0.464646] alloc kstat_irqs on node 0 [ 0.464650] alloc irq_desc for 2257 on node 0 [ 0.464652] alloc kstat_irqs on node 0 [ 0.464656] alloc irq_desc for 2256 on node 0 [ 0.464658] alloc kstat_irqs on node 0 [ 0.000005] Initializing CPU#7 [ 0.000033] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000035] CPU: L2 cache: 256K [ 0.000036] CPU: L3 cache: 8192K [ 0.000039] CPU 7/0x0 -> Node 0 [ 0.000041] CPU: Unsupported number of siblings 16 [ 0.464734] Brought up 8 CPUs [ 0.465042] CPU0 attaching sched-domain: [ 0.465045] domain 0: span 0-7 level CPU [ 0.465048] groups: 0 1 2 3 4 5 6 7 [ 0.465058] CPU1 attaching sched-domain: [ 0.465060] domain 0: span 0-7 level CPU [ 0.465062] groups: 1 2 3 4 5 6 7 0 [ 0.465072] CPU2 attaching sched-domain: [ 0.465074] domain 0: span 0-7 level CPU [ 0.465076] groups: 2 3 4 5 6 7 0 1 [ 0.465086] CPU3 attaching sched-domain: [ 0.465088] domain 0: span 0-7 level CPU [ 0.465090] groups: 3 4 5 6 7 0 1 2 [ 0.465100] CPU4 attaching sched-domain: [ 0.465102] domain 0: span 0-7 level CPU [ 0.465104] groups: 4 5 6 7 0 1 2 3 [ 0.465114] CPU5 attaching sched-domain: [ 0.465116] domain 0: span 0-7 level CPU [ 0.465118] groups: 5 6 7 0 1 2 3 4 [ 0.465128] CPU6 attaching sched-domain: [ 0.465130] domain 0: span 0-7 level CPU [ 0.465132] groups: 6 7 0 1 2 3 4 5 [ 0.465142] CPU7 attaching sched-domain: [ 0.465144] domain 0: span 0-7 level CPU [ 0.465146] groups: 7 0 1 2 3 4 5 6 [ 0.465488] devtmpfs: initialized [ 0.466011] Grant table initialized [ 0.466057] regulator: core version 0.5 [ 0.466132] Time: 12:04:17 Date: 06/18/10 [ 0.466214] NET: Registered protocol family 16 [ 0.466304] alloc irq_desc for 2255 on node 0 [ 0.466306] alloc kstat_irqs on node 0 [ 0.466425] ACPI: bus type pci registered [ 0.466532] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.466582] PCI: Not using MMCONFIG. [ 0.466626] PCI: Using configuration type 1 for base access [ 0.467586] bio: create slab at 0 [ 0.469872] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.469939] ACPI: EC: Look up EC in DSDT [ 0.473030] ACPI: Executed 1 blocks of module-level executable AML code [ 0.493200] ACPI: Interpreter enabled [ 0.493248] ACPI: (supports S0 S1 S3 S4 S5) [ 0.493443] ACPI: Using IOAPIC for interrupt routing [ 0.493540] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.497296] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.507327] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.519869] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.520005] ACPI Warning: Incorrect checksum in table [OEMB] - 87, should be 86 (20090903/tbutils-314) [ 0.520144] ACPI Warning: Incorrect checksum in table [ ] - 7B, should be BF (20090903/tbutils-314) [ 0.520489] ACPI: No dock devices found. [ 0.520900] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.521154] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.521205] pci 0000:00:03.0: PME# disabled [ 0.521822] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf4ffe000-0xf4ffe3ff] [ 0.521916] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.521969] pci 0000:00:1a.0: PME# disabled [ 0.522083] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4ff8000-0xf4ffbfff] [ 0.522160] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.522211] pci 0000:00:1b.0: PME# disabled [ 0.522372] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.522423] pci 0000:00:1c.0: PME# disabled [ 0.522583] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.522634] pci 0000:00:1c.1: PME# disabled [ 0.522793] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.522845] pci 0000:00:1c.2: PME# disabled [ 0.523004] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.523055] pci 0000:00:1c.3: PME# disabled [ 0.523216] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.523268] pci 0000:00:1c.4: PME# disabled [ 0.523425] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.523477] pci 0000:00:1c.5: PME# disabled [ 0.523635] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.523686] pci 0000:00:1c.6: PME# disabled [ 0.523843] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.523895] pci 0000:00:1c.7: PME# disabled [ 0.524025] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf4ffd000-0xf4ffd3ff] [ 0.524119] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.524171] pci 0000:00:1d.0: PME# disabled [ 0.524510] pci 0000:00:1f.2: reg 10 io port: [0x8c00-0x8c07] [ 0.524519] pci 0000:00:1f.2: reg 14 io port: [0x8880-0x8883] [ 0.524529] pci 0000:00:1f.2: reg 18 io port: [0x8800-0x8807] [ 0.524538] pci 0000:00:1f.2: reg 1c io port: [0x8480-0x8483] [ 0.524547] pci 0000:00:1f.2: reg 20 io port: [0x8400-0x840f] [ 0.524556] pci 0000:00:1f.2: reg 24 io port: [0x8080-0x808f] [ 0.524640] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf4ffc000-0xf4ffc0ff] [ 0.524664] pci 0000:00:1f.3: reg 20 io port: [0xffe0-0xffff] [ 0.524746] pci 0000:00:1f.5: reg 10 io port: [0x9c00-0x9c07] [ 0.524756] pci 0000:00:1f.5: reg 14 io port: [0x9880-0x9883] [ 0.524765] pci 0000:00:1f.5: reg 18 io port: [0x9800-0x9807] [ 0.524774] pci 0000:00:1f.5: reg 1c io port: [0x9480-0x9483] [ 0.524783] pci 0000:00:1f.5: reg 20 io port: [0x9400-0x940f] [ 0.524792] pci 0000:00:1f.5: reg 24 io port: [0x9080-0x908f] [ 0.524900] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff] [ 0.524916] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.524931] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff] [ 0.524940] pci 0000:01:00.0: reg 24 io port: [0xac00-0xac7f] [ 0.524948] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7ae0000-0xf7afffff] [ 0.525048] pci 0000:00:03.0: bridge io port: [0xa000-0xafff] [ 0.525053] pci 0000:00:03.0: bridge 32bit mmio: [0xf5000000-0xf7afffff] [ 0.525062] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.525480] pci 0000:05:00.0: reg 10 64bit mmio: [0xf7efe000-0xf7efffff] [ 0.525602] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.525656] pci 0000:05:00.0: PME# disabled [ 0.525800] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7e00000-0xf7efffff] [ 0.525877] pci 0000:04:00.0: reg 10 io port: [0xdc00-0xdc07] [ 0.525888] pci 0000:04:00.0: reg 14 io port: [0xd880-0xd883] [ 0.525900] pci 0000:04:00.0: reg 18 io port: [0xd800-0xd807] [ 0.525911] pci 0000:04:00.0: reg 1c io port: [0xd480-0xd483] [ 0.525923] pci 0000:04:00.0: reg 20 io port: [0xd400-0xd40f] [ 0.525934] pci 0000:04:00.0: reg 24 32bit mmio: [0xf7dff000-0xf7dff7ff] [ 0.525946] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xf7de0000-0xf7deffff] [ 0.526001] pci 0000:04:00.0: PME# supported from D3hot [ 0.526052] pci 0000:04:00.0: PME# disabled [ 0.526178] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.526183] pci 0000:00:1c.5: bridge 32bit mmio: [0xf7d00000-0xf7dfffff] [ 0.526323] pci 0000:03:00.0: reg 24 32bit mmio: [0xf7cfe000-0xf7cfffff] [ 0.526380] pci 0000:03:00.0: PME# supported from D3hot [ 0.526432] pci 0000:03:00.0: PME# disabled [ 0.526552] pci 0000:03:00.1: reg 10 io port: [0xcc00-0xcc07] [ 0.526565] pci 0000:03:00.1: reg 14 io port: [0xc880-0xc883] [ 0.526577] pci 0000:03:00.1: reg 18 io port: [0xc800-0xc807] [ 0.526589] pci 0000:03:00.1: reg 1c io port: [0xc480-0xc483] [ 0.526602] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f] [ 0.526749] pci 0000:00:1c.6: bridge io port: [0xc000-0xcfff] [ 0.526755] pci 0000:00:1c.6: bridge 32bit mmio: [0xf7c00000-0xf7cfffff] [ 0.526832] pci 0000:02:00.0: reg 10 io port: [0xb800-0xb8ff] [ 0.526863] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xf3fff000-0xf3ffffff] [ 0.526884] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf3ff8000-0xf3ffbfff] [ 0.526895] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xf7bf0000-0xf7bfffff] [ 0.526957] pci 0000:02:00.0: supports D1 D2 [ 0.526959] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.527013] pci 0000:02:00.0: PME# disabled [ 0.527151] pci 0000:00:1c.7: bridge io port: [0xb000-0xbfff] [ 0.527156] pci 0000:00:1c.7: bridge 32bit mmio: [0xf7b00000-0xf7bfffff] [ 0.527166] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xf3f00000-0xf3ffffff] [ 0.527230] pci 0000:0a:04.0: reg 10 32bit mmio: [0xf7fff000-0xf7fff7ff] [ 0.527241] pci 0000:0a:04.0: reg 14 io port: [0xec00-0xec7f] [ 0.527313] pci 0000:0a:04.0: supports D2 [ 0.527315] pci 0000:0a:04.0: PME# supported from D2 D3hot D3cold [ 0.527367] pci 0000:0a:04.0: PME# disabled [ 0.527477] pci 0000:00:1e.0: transparent bridge [ 0.527526] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.527532] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff] [ 0.527618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.527917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 0.528071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT] [ 0.528141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT] [ 0.528212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT] [ 0.528286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.528356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] [ 0.528425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] [ 0.528495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT] [ 0.528584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT] [ 0.528670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.561822] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.562275] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.562520] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.562965] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.563410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.563919] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.564363] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.564813] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.565203] sync cpu 0 get result 1 max_id 7 [ 0.565211] sync cpu 1 get result 1 max_id 7 [ 0.565218] sync cpu 2 get result 1 max_id 7 [ 0.565228] sync cpu 3 get result 1 max_id 7 [ 0.565235] sync cpu 4 get result 1 max_id 7 [ 0.565242] sync cpu 5 get result 1 max_id 7 [ 0.565249] sync cpu 6 get result 1 max_id 7 [ 0.565256] sync cpu 7 get result 1 max_id 7 [ 0.565260] alloc irq_desc for 2254 on node 0 [ 0.565262] alloc kstat_irqs on node 0 [ 0.565286] xen_balloon: Initialising balloon driver with page order 0. [ 0.565403] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.565471] vgaarb: loaded [ 0.565601] SCSI subsystem initialized [ 0.565868] libata version 3.00 loaded. [ 0.565941] usbcore: registered new interface driver usbfs [ 0.565997] usbcore: registered new interface driver hub [ 0.566077] usbcore: registered new device driver usb [ 0.566255] ACPI: WMI: Mapper loaded [ 0.566300] PCI: Using ACPI for IRQ routing [ 0.566570] NetLabel: Initializing [ 0.566614] NetLabel: domain hash size = 128 [ 0.566659] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.566714] NetLabel: unlabeled traffic allowed by default [ 0.566831] Switching to clocksource xen [ 0.568781] pnp: PnP ACPI init [ 0.568833] ACPI: bus type pnp registered [ 0.569249] xen: registering gsi 8 triggering 1 polarity 0 [ 0.569252] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.569299] xen: --> irq=8 [ 0.569373] xen: registering gsi 13 triggering 1 polarity 0 [ 0.569375] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.569422] xen: --> irq=13 [ 0.571304] xen: registering gsi 4 triggering 1 polarity 0 [ 0.571306] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.571354] xen: --> irq=4 [ 0.571700] xen: registering gsi 1 triggering 1 polarity 0 [ 0.571702] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.571752] xen: --> irq=1 [ 0.572767] pnp: PnP ACPI: found 16 devices [ 0.572813] ACPI: ACPI bus type pnp unregistered [ 0.572866] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.572920] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.572972] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.573021] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.573070] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.573119] system 00:07: ioport range 0x600-0x607 has been reserved [ 0.573168] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.573218] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.573268] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.573321] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.573375] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.573438] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.573495] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.573548] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.573598] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved [ 0.573648] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 0.573698] system 00:0f: iomem range 0x100000-0xdfffffff could not be reserved [ 0.573762] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.573868] pciback 0000:00:1a.0: seizing device [ 0.573917] pciback 0000:00:1b.0: seizing device [ 0.574020] pciback 0000:01:00.0: seizing device [ 0.578181] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.578369] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.578418] pci 0000:00:03.0: IO window: 0xa000-0xafff [ 0.578470] pci 0000:00:03.0: MEM window: 0xf5000000-0xf7afffff [ 0.578521] pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.578590] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09 [ 0.578640] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.578692] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff [ 0.578743] pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff [ 0.578814] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:08 [ 0.578863] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.578915] pci 0000:00:1c.1: MEM window: 0xf0400000-0xf05fffff [ 0.578967] pci 0000:00:1c.1: PREFETCH window: 0x000000f0600000-0x000000f07fffff [ 0.579037] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07 [ 0.579087] pci 0000:00:1c.2: IO window: 0x3000-0x3fff [ 0.579139] pci 0000:00:1c.2: MEM window: 0xf0800000-0xf09fffff [ 0.579732] pci 0000:00:1c.2: PREFETCH window: 0x000000f0a00000-0x000000f0bfffff [ 0.579802] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.579852] pci 0000:00:1c.3: IO window: 0x4000-0x4fff [ 0.579904] pci 0000:00:1c.3: MEM window: 0xf0c00000-0xf0dfffff [ 0.579955] pci 0000:00:1c.3: PREFETCH window: 0x000000f0e00000-0x000000f0ffffff [ 0.580026] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 [ 0.580073] pci 0000:00:1c.4: IO window: disabled [ 0.580124] pci 0000:00:1c.4: MEM window: 0xf7e00000-0xf7efffff [ 0.580176] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.580230] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.580279] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.580331] pci 0000:00:1c.5: MEM window: 0xf7d00000-0xf7dfffff [ 0.580382] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.580437] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:03 [ 0.580486] pci 0000:00:1c.6: IO window: 0xc000-0xcfff [ 0.580538] pci 0000:00:1c.6: MEM window: 0xf7c00000-0xf7cfffff [ 0.580589] pci 0000:00:1c.6: PREFETCH window: disabled [ 0.580643] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:02 [ 0.580693] pci 0000:00:1c.7: IO window: 0xb000-0xbfff [ 0.580745] pci 0000:00:1c.7: MEM window: 0xf7b00000-0xf7bfffff [ 0.580796] pci 0000:00:1c.7: PREFETCH window: 0x000000f3f00000-0x000000f3ffffff [ 0.580866] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 0.580916] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.580968] pci 0000:00:1e.0: MEM window: 0xf7f00000-0xf7ffffff [ 0.581019] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.581082] xen: registering gsi 16 triggering 0 polarity 1 [ 0.581090] alloc irq_desc for 16 on node 0 [ 0.581092] alloc kstat_irqs on node 0 [ 0.581095] xen: --> irq=16 [ 0.581100] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.581153] pci 0000:00:03.0: setting latency timer to 64 [ 0.581165] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.581214] xen: registering gsi 17 triggering 0 polarity 1 [ 0.581219] alloc irq_desc for 17 on node 0 [ 0.581221] alloc kstat_irqs on node 0 [ 0.581223] xen: --> irq=17 [ 0.581227] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.581280] pci 0000:00:1c.0: setting latency timer to 64 [ 0.581292] pci 0000:00:1c.1: enabling device (0104 -> 0107) [ 0.581342] xen: registering gsi 16 triggering 0 polarity 1 [ 0.581344] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.581390] xen: --> irq=16 [ 0.581392] Already setup the GSI :16 [ 0.581436] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.581493] pci 0000:00:1c.1: setting latency timer to 64 [ 0.581505] pci 0000:00:1c.2: enabling device (0104 -> 0107) [ 0.581555] xen: registering gsi 18 triggering 0 polarity 1 [ 0.581559] alloc irq_desc for 18 on node 0 [ 0.581561] alloc kstat_irqs on node 0 [ 0.581564] xen: --> irq=18 [ 0.581568] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.581621] pci 0000:00:1c.2: setting latency timer to 64 [ 0.581633] pci 0000:00:1c.3: enabling device (0104 -> 0107) [ 0.581682] xen: registering gsi 19 triggering 0 polarity 1 [ 0.581687] alloc irq_desc for 19 on node 0 [ 0.581689] alloc kstat_irqs on node 0 [ 0.581691] xen: --> irq=19 [ 0.581695] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.581748] pci 0000:00:1c.3: setting latency timer to 64 [ 0.581760] xen: registering gsi 17 triggering 0 polarity 1 [ 0.581762] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.581808] xen: --> irq=17 [ 0.581810] Already setup the GSI :17 [ 0.581854] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.581907] pci 0000:00:1c.4: setting latency timer to 64 [ 0.581919] xen: registering gsi 16 triggering 0 polarity 1 [ 0.581921] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.581967] xen: --> irq=16 [ 0.581969] Already setup the GSI :16 [ 0.582013] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.582065] pci 0000:00:1c.5: setting latency timer to 64 [ 0.582077] xen: registering gsi 18 triggering 0 polarity 1 [ 0.582079] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.582126] xen: --> irq=18 [ 0.582127] Already setup the GSI :18 [ 0.582171] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.582227] pci 0000:00:1c.6: setting latency timer to 64 [ 0.582239] xen: registering gsi 19 triggering 0 polarity 1 [ 0.582241] xen_allocate_pirq: returning irq 19 for gsi 19 [ 0.582287] xen: --> irq=19 [ 0.582289] Already setup the GSI :19 [ 0.582333] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.582386] pci 0000:00:1c.7: setting latency timer to 64 [ 0.582396] pci 0000:00:1e.0: setting latency timer to 64 [ 0.582400] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.582403] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.582405] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.582407] pci_bus 0000:01: resource 1 mem: [0xf5000000-0xf7afffff] [ 0.582409] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.582412] pci_bus 0000:09: resource 0 io: [0x1000-0x1fff] [ 0.582414] pci_bus 0000:09: resource 1 mem: [0xf0000000-0xf01fffff] [ 0.582416] pci_bus 0000:09: resource 2 pref mem [0xf0200000-0xf03fffff] [ 0.582418] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff] [ 0.582420] pci_bus 0000:08: resource 1 mem: [0xf0400000-0xf05fffff] [ 0.582422] pci_bus 0000:08: resource 2 pref mem [0xf0600000-0xf07fffff] [ 0.582425] pci_bus 0000:07: resource 0 io: [0x3000-0x3fff] [ 0.582427] pci_bus 0000:07: resource 1 mem: [0xf0800000-0xf09fffff] [ 0.582429] pci_bus 0000:07: resource 2 pref mem [0xf0a00000-0xf0bfffff] [ 0.582431] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] [ 0.582433] pci_bus 0000:06: resource 1 mem: [0xf0c00000-0xf0dfffff] [ 0.582435] pci_bus 0000:06: resource 2 pref mem [0xf0e00000-0xf0ffffff] [ 0.582437] pci_bus 0000:05: resource 1 mem: [0xf7e00000-0xf7efffff] [ 0.582440] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.582442] pci_bus 0000:04: resource 1 mem: [0xf7d00000-0xf7dfffff] [ 0.582444] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.582446] pci_bus 0000:03: resource 1 mem: [0xf7c00000-0xf7cfffff] [ 0.582448] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 0.582450] pci_bus 0000:02: resource 1 mem: [0xf7b00000-0xf7bfffff] [ 0.582452] pci_bus 0000:02: resource 2 pref mem [0xf3f00000-0xf3ffffff] [ 0.582455] pci_bus 0000:0a: resource 0 io: [0xe000-0xefff] [ 0.582457] pci_bus 0000:0a: resource 1 mem: [0xf7f00000-0xf7ffffff] [ 0.582459] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 0.582461] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.582484] NET: Registered protocol family 2 [ 0.582753] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.584380] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.586752] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.587069] TCP: Hash tables configured (established 524288 bind 65536) [ 0.587122] TCP reno registered [ 0.587263] NET: Registered protocol family 1 [ 0.587417] pciback 0000:01:00.0: Boot video device [ 0.587492] Trying to unpack rootfs image as initramfs... [ 0.698089] Freeing initrd memory: 221144k freed [ 0.731870] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.731927] DMA: Placing 64MB software IO TLB between ffff880012f88000 - ffff880016f88000 [ 0.731991] DMA: software IO TLB at phys 0x12f88000 - 0x16f88000 [ 0.732584] Scanning for low memory corruption every 60 seconds [ 0.732751] audit: initializing netlink socket (disabled) [ 0.732807] type=2000 audit(1276862657.937:1): initialized [ 0.740582] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.741971] VFS: Disk quotas dquot_6.5.2 [ 0.742062] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.742611] fuse init (API version 7.13) [ 0.742730] msgmni has been set to 6885 [ 0.282137] alg: No test for stdrng (krng) [ 0.743224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.743289] io scheduler noop registered [ 0.743333] io scheduler anticipatory registered [ 0.743378] io scheduler deadline registered [ 0.743449] io scheduler cfq registered (default) [ 0.743701] alloc irq_desc for 2253 on node 0 [ 0.743703] alloc kstat_irqs on node 0 [ 0.743738] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.743907] alloc irq_desc for 2252 on node 0 [ 0.743909] alloc kstat_irqs on node 0 [ 0.743938] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.744106] alloc irq_desc for 2251 on node 0 [ 0.744108] alloc kstat_irqs on node 0 [ 0.744136] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.744304] alloc irq_desc for 2250 on node 0 [ 0.744306] alloc kstat_irqs on node 0 [ 0.744334] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.744504] alloc irq_desc for 2249 on node 0 [ 0.744506] alloc kstat_irqs on node 0 [ 0.744534] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.744701] alloc irq_desc for 2248 on node 0 [ 0.744703] alloc kstat_irqs on node 0 [ 0.744731] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.744891] alloc irq_desc for 2247 on node 0 [ 0.744893] alloc kstat_irqs on node 0 [ 0.744921] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.745080] alloc irq_desc for 2246 on node 0 [ 0.745082] alloc kstat_irqs on node 0 [ 0.745109] pcieport 0000:00:1c.6: setting latency timer to 64 [ 0.745268] alloc irq_desc for 2245 on node 0 [ 0.745270] alloc kstat_irqs on node 0 [ 0.745298] pcieport 0000:00:1c.7: setting latency timer to 64 [ 0.745397] Firmware did not grant requested _OSC control [ 0.745399] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 0.745409] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.745468] Firmware did not grant requested _OSC control [ 0.745485] Firmware did not grant requested _OSC control [ 0.745500] Firmware did not grant requested _OSC control [ 0.745515] Firmware did not grant requested _OSC control [ 0.745543] Firmware did not grant requested _OSC control [ 0.745557] Firmware did not grant requested _OSC control [ 0.745572] Firmware did not grant requested _OSC control [ 0.745587] Firmware did not grant requested _OSC control [ 0.745602] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.745776] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.745842] ACPI: Power Button [PWRB] [ 0.745921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.745984] ACPI: Power Button [PWRF] [ 0.747492] ACPI: SSDT 00000000dfe88150 0244C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.748511] ACPI: SSDT 00000000dfe8a5a0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.750310] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.751409] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.752529] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.753645] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.754760] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.755865] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.756971] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.758150] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.762091] Event-channel device installed. [ 0.762190] xen: registering gsi 16 triggering 0 polarity 1 [ 0.762192] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.762239] xen: --> irq=16 [ 0.762242] Already setup the GSI :16 [ 0.762287] pciback 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.762341] pciback 0000:01:00.0: PCI INT A disabled [ 0.762423] xen: registering gsi 22 triggering 0 polarity 1 [ 0.762431] alloc irq_desc for 22 on node 0 [ 0.762433] alloc kstat_irqs on node 0 [ 0.762436] xen: --> irq=22 [ 0.762441] pciback 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.762491] pciback 0000:00:1b.0: PCI INT A disabled [ 0.762577] xen: registering gsi 16 triggering 0 polarity 1 [ 0.762579] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.762622] xen: --> irq=16 [ 0.762624] Already setup the GSI :16 [ 0.762665] pciback 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.762715] pciback 0000:00:1a.0: PCI INT A disabled [ 0.766194] blktap_device_init: blktap device major 253 [ 0.766240] blktap_ring_init: blktap ring major: 252 [ 0.770350] registering netback [ 0.770448] xen-platform-pcifailed backend handshake: unrecognised magic value [ 0.770586] alloc irq_desc for 2244 on node 0 [ 0.770592] alloc kstat_irqs on node 0 [ 0.771432] alloc irq_desc for 2243 on node 0 [ 0.771434] alloc kstat_irqs on node 0 [ 0.771784] hpet_acpi_add: no address or irqs in _CRS [ 0.771843] Linux agpgart interface v0.103 [ 0.771883] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.772036] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.772359] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.773116] brd: module loaded [ 0.773477] loop: module loaded [ 0.773574] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.773702] ata_piix 0000:00:1f.2: version 2.13 [ 0.773718] xen: registering gsi 21 triggering 0 polarity 1 [ 0.773729] alloc irq_desc for 21 on node 0 [ 0.773730] alloc kstat_irqs on node 0 [ 0.773733] xen: --> irq=21 [ 0.773741] ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.773788] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.773960] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.774143] scsi0 : ata_piix [ 0.774317] scsi1 : ata_piix [ 0.776277] ata1: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 21 [ 0.776325] ata2: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 21 [ 0.776444] xen: registering gsi 21 triggering 0 polarity 1 [ 0.776452] xen_allocate_pirq: returning irq 21 for gsi 21 [ 0.776497] xen: --> irq=21 [ 0.776499] Already setup the GSI :21 [ 0.776540] ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.776587] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.776753] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.776948] scsi2 : ata_piix [ 0.777090] scsi3 : ata_piix [ 0.778586] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21 [ 0.778631] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21 [ 0.778804] xen: registering gsi 17 triggering 0 polarity 1 [ 0.778806] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.778849] xen: --> irq=17 [ 0.778851] Already setup the GSI :17 [ 0.778892] pata_acpi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.778971] pata_acpi 0000:04:00.0: setting latency timer to 64 [ 0.778985] pata_acpi 0000:04:00.0: PCI INT A disabled [ 0.779042] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 0.779086] xen: registering gsi 19 triggering 0 polarity 1 [ 0.779088] xen_allocate_pirq: returning irq 19 for gsi 19 [ 0.779127] xen: --> irq=19 [ 0.779129] Already setup the GSI :19 [ 0.779167] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.779241] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.779253] pata_acpi 0000:03:00.1: PCI INT B disabled [ 0.779491] Fixed MDIO Bus: probed [ 0.779555] PPP generic driver version 2.4.2 [ 0.779623] tun: Universal TUN/TAP device driver, 1.6 [ 0.779663] tun: (C) 1999-2004 Max Krasnyansky [ 0.779755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.779815] xen: registering gsi 23 triggering 0 polarity 1 [ 0.779819] alloc irq_desc for 23 on node 0 [ 0.779821] alloc kstat_irqs on node 0 [ 0.779823] xen: --> irq=23 [ 0.779828] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.779881] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.779885] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.779949] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.780124] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.784064] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 0.784084] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf4ffd000 [ 0.807141] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.807376] usb usb1: configuration #1 chosen from 1 choice [ 0.807502] hub 1-0:1.0: USB hub found [ 0.807675] hub 1-0:1.0: 2 ports detected [ 0.807830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.807924] uhci_hcd: USB Universal Host Controller Interface driver [ 0.808104] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.808174] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.808980] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.809196] mice: PS/2 mouse device common for all mice [ 0.809463] rtc_cmos 00:03: RTC can wake from S4 [ 0.809598] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.809714] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.810015] device-mapper: uevent: version 1.0.3 [ 0.810376] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.812024] device-mapper: multipath: version 1.1.0 loaded [ 0.812424] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.814548] cpuidle: using governor ladder [ 0.814630] cpuidle: using governor menu [ 0.815342] TCP cubic registered [ 0.815625] NET: Registered protocol family 10 [ 0.816710] lo: Disabled Privacy Extensions [ 0.817302] NET: Registered protocol family 17 [ 0.818013] PM: Resume from disk failed. [ 0.818033] registered taskstats version 1 [ 0.819774] Magic number: 14:137:77 [ 0.820234] rtc_cmos 00:03: setting system clock to 2010-06-18 12:04:17 UTC (1276862657) [ 0.820329] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.820396] EDD information not available. [ 0.365861] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.126252] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.148425] ata3: SATA link down (SStatus 0 SControl 300) [ 1.160710] ata4: SATA link down (SStatus 0 SControl 300) [ 1.276638] usb 1-1: configuration #1 chosen from 1 choice [ 1.276840] hub 1-1:1.0: USB hub found [ 1.277043] hub 1-1:1.0: 8 ports detected [ 1.646401] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.646499] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.646867] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.646967] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.667342] ata2.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133 [ 1.667416] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.686840] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133 [ 1.686914] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.687223] ata1.01: ATA-8: WDC WD15EADS-00S2B0, 04.05G04, max UDMA/133 [ 1.687294] ata1.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.707109] ata2.00: configured for UDMA/133 [ 1.726735] ata1.00: configured for UDMA/133 [ 1.747368] ata1.01: configured for UDMA/133 [ 1.284469] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 1.284786] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.285049] scsi 0:0:1:0: Direct-Access ATA WDC WD15EADS-00S 04.0 PQ: 0 ANSI: 5 [ 1.286712] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.286837] sd 0:0:0:0: [sda] Write Protect is off [ 1.286908] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.286990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.285542] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.285796] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 1.748949] sda: [ 1.287113] scsi 1:0:0:0: Direct-Access ATA WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5 [ 1.286027] sd 0:0:1:0: [sdb] Write Protect is off [ 1.286031] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.286100] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287415] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.287698] sd 1:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.287827] sd 1:0:0:0: [sdc] Write Protect is off [ 1.287832] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.287896] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.288411] sdc: sda1 sda2 sda3 [ 1.287835] sdb: sdc1 sdc2 sdc3 sdc4 [ 1.772036] sdb1 [ 1.308982] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.772948] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.789511] sd 1:0:0:0: [sdc] Attached SCSI disk [ 1.789779] Freeing unused kernel memory: 892k freed [ 1.790078] Write protecting the kernel read-only data: 7736k [ 1.406743] udev: starting version 151 [ 1.493597] ahci 0000:03:00.0: version 3.0 [ 1.493625] xen: registering gsi 18 triggering 0 polarity 1 [ 1.493628] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.493681] xen: --> irq=18 [ 1.493686] Already setup the GSI :18 [ 1.493734] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.509699] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.509766] xen: registering gsi 19 triggering 0 polarity 1 [ 1.509768] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.509811] xen: --> irq=19 [ 1.509815] Already setup the GSI :19 [ 1.509857] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.509948] r8169 0000:02:00.0: setting latency timer to 64 [ 1.510014] alloc irq_desc for 2242 on node 0 [ 1.510017] alloc kstat_irqs on node 0 [ 1.510514] eth0: RTL8168d/8111d at 0xffffc9000067e000, e0:cb:4e:42:ed:b8, XID 083000c0 IRQ 2242 [ 1.512257] xen: registering gsi 19 triggering 0 polarity 1 [ 1.512259] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.512306] xen: --> irq=19 [ 1.512308] Already setup the GSI :19 [ 1.512349] ohci1394 0000:0a:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.980081] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.980140] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.980189] ahci 0000:03:00.0: setting latency timer to 64 [ 1.516923] scsi4 : ahci [ 1.517079] scsi5 : ahci [ 1.517230] ata5: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe100 irq 18 [ 1.517291] ata6: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe180 irq 18 [ 1.518639] xen: registering gsi 19 triggering 0 polarity 1 [ 1.518642] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.518693] xen: --> irq=19 [ 1.518696] Already setup the GSI :19 [ 1.518743] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.518838] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.519052] scsi6 : pata_jmicron [ 1.519184] scsi7 : pata_jmicron [ 1.520141] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 [ 1.520194] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 [ 2.041115] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f7fff000-f7fff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.139010] ata7.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F501, max UDMA/33 [ 2.165550] ata7.00: configured for UDMA/33 [ 2.209867] EXT4-fs (sdc2): mounted filesystem with ordered data mode [ 2.333520] ata6: SATA link down (SStatus 0 SControl 300) [ 2.513269] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.515582] ata5.00: ATAPI: Optiarc DVD RW AD-7240S, 1.03, max UDMA/100, ATAPI AN [ 2.518148] ata5.00: configured for UDMA/100 [ 2.072534] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.03 PQ: 0 ANSI: 5 [ 2.078058] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.078150] Uniform CD-ROM driver Revision: 3.20 [ 2.078384] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.078472] sr 4:0:0:0: Attached scsi generic sg3 type 5 [ 2.078499] scsi 6:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616E F501 PQ: 0 ANSI: 5 [ 2.082019] sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray [ 2.082288] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 2.082372] sr 6:0:0:0: Attached scsi generic sg4 type 5 [ 3.274985] Adding 2096472k swap on /dev/sdc4. Priority:-1 extents:1 across:2096472k [ 3.358287] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000c4365c] [ 3.372505] udev: starting version 151 [ 4.493278] ATK0110 ATK0110:00: EC enabled [ 4.531459] xen: registering gsi 16 triggering 0 polarity 1 [ 4.531466] xen_allocate_pirq: returning irq 16 for gsi 16 [ 4.531471] xen: --> irq=16 [ 4.531478] Already setup the GSI :16 [ 4.531484] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.531521] xhci_hcd 0000:05:00.0: setting latency timer to 64 [ 4.531530] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 4.531634] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2 [ 4.531974] xhci_hcd 0000:05:00.0: irq 16, io mem 0xf7efe000 [ 4.532028] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor [ 4.532189] usb usb2: configuration #1 chosen from 1 choice [ 4.532199] xHCI xhci_add_endpoint called for root hub [ 4.532205] xHCI xhci_check_bandwidth called for root hub [ 4.532283] hub 2-0:1.0: USB hub found [ 4.532324] hub 2-0:1.0: 4 ports detected [ 5.765449] r8169: eth0: link up [ 6.204400] r8169: eth0: link up [ 6.798693] lp: driver loaded but no devices found [ 10.889208] Bridge firewalling registered [ 10.616753] virbr0: starting userspace STP failed, starting kernel STP [ 11.512377] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.926875] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 11.927196] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 11.927201] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 11.927206] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 12.715798] r8169: peth0: link up [ 12.765344] device peth0 entered promiscuous mode [ 12.854672] eth0: port 1(peth0) entering forwarding state [ 17.725144] alloc irq_desc for 2241 on node 0 [ 17.725147] alloc kstat_irqs on node 0 [ 17.725282] alloc irq_desc for 2240 on node 0 [ 17.725284] alloc kstat_irqs on node 0 [ 18.078322] XENBUS: Unable to read cpu state [ 18.080421] XENBUS: Unable to read cpu state [ 18.080792] XENBUS: Unable to read cpu state [ 18.081102] XENBUS: Unable to read cpu state [ 18.081415] XENBUS: Unable to read cpu state [ 18.081730] XENBUS: Unable to read cpu state [ 18.082042] XENBUS: Unable to read cpu state [ 18.082355] XENBUS: Unable to read cpu state [ 20.753156] virbr0: no IPv6 routers present [ 22.432949] ppdev: user-space parallel port driver [ 22.897755] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 23.009905] lo: Disabled Privacy Extensions [ 22.702223] CPU0 attaching NULL sched-domain. [ 22.702232] CPU1 attaching NULL sched-domain. [ 22.702238] CPU2 attaching NULL sched-domain. [ 22.702244] CPU3 attaching NULL sched-domain. [ 22.702249] CPU4 attaching NULL sched-domain. [ 22.702254] CPU5 attaching NULL sched-domain. [ 22.702260] CPU6 attaching NULL sched-domain. [ 22.702265] CPU7 attaching NULL sched-domain. [ 22.869229] CPU0 attaching sched-domain: [ 22.869236] domain 0: span 0-7 level CPU [ 22.869243] groups: 0 1 2 3 4 5 6 7 [ 22.869267] CPU1 attaching sched-domain: [ 22.869272] domain 0: span 0-7 level CPU [ 22.869278] groups: 1 2 3 4 5 6 7 0 [ 22.869300] CPU2 attaching sched-domain: [ 22.869305] domain 0: span 0-7 level CPU [ 22.869310] groups: 2 3 4 5 6 7 0 1 [ 22.869333] CPU3 attaching sched-domain: [ 22.869337] domain 0: span 0-7 level CPU [ 22.869343] groups: 3 4 5 6 7 0 1 2 [ 22.869365] CPU4 attaching sched-domain: [ 22.869369] domain 0: span 0-7 level CPU [ 22.869375] groups: 4 5 6 7 0 1 2 3 [ 22.869398] CPU5 attaching sched-domain: [ 22.869402] domain 0: span 0-7 level CPU [ 22.869408] groups: 5 6 7 0 1 2 3 4 [ 22.869430] CPU6 attaching sched-domain: [ 22.869434] domain 0: span 0-7 level CPU [ 22.869440] groups: 6 7 0 1 2 3 4 5 [ 22.869462] CPU7 attaching sched-domain: [ 22.869467] domain 0: span 0-7 level CPU [ 22.869472] groups: 7 0 1 2 3 4 5 6 [ 22.978373] peth0: no IPv6 routers present [ 23.386625] eth0: no IPv6 routers present [ 107.509246] alloc irq_desc for 2239 on node 0 [ 107.509250] alloc kstat_irqs on node 0 [ 107.973752] device vif2.0 entered promiscuous mode [ 108.053507] eth0: port 2(vif2.0) entering forwarding state [ 108.041887] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 108.579714] device tap2.0 entered promiscuous mode [ 108.579759] eth0: port 3(tap2.0) entering forwarding state [ 108.427762] alloc irq_desc for 2238 on node 0 [ 108.427765] alloc kstat_irqs on node 0 [ 108.427783] alloc irq_desc for 2237 on node 0 [ 108.427785] alloc kstat_irqs on node 0 [ 109.172345] pciback: vpci: 0000:01:00.0: assign to virtual slot 0 [ 109.174739] pciback: vpci: 0000:00:1a.0: assign to virtual slot 1 [ 118.208619] vif2.0: no IPv6 routers present [ 119.100419] tap2.0: no IPv6 routers present [ 212.333842] eth0: port 3(tap2.0) entering disabled state [ 211.583453] device tap2.0 left promiscuous mode [ 211.583460] eth0: port 3(tap2.0) entering disabled state [ 212.768199] eth0: port 2(vif2.0) entering disabled state [ 212.012782] eth0: port 2(vif2.0) entering disabled state [ 212.664159] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 284.258441] device vif3.0 entered promiscuous mode [ 284.722292] eth0: port 2(vif3.0) entering forwarding state [ 284.546083] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 285.070952] device tap3.0 entered promiscuous mode [ 285.070995] eth0: port 3(tap3.0) entering forwarding state [ 285.769923] pciback: vpci: 0000:01:00.0: assign to virtual slot 0 [ 285.770273] pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware. [ 285.770796] pciback: vpci: 0000:00:1a.0: assign to virtual slot 1 [ 285.771214] pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware. [ 294.993102] tap3.0: no IPv6 routers present [ 295.236022] vif3.0: no IPv6 routers present