From: Samuel Kvasnica Subject: vscsi >2TB patch This patch fixes current 2TB limitation of the xen vscsi driver. Both frontend (command size) and backend (missing READ_16/WRITE_16 commands) driver need a fix. Also an scsi command added to support ALUA. Tested thoroughly on 4TB external RAID. I also enabled some more commands to allow operating LTO tape drives and autoloaders (tested on HP Ultrium 1/8 + Bacula). Still more scsi commands might be missing for other specific devices (why not to enable all scsi commands by default ?). This patch was tested on opensuse xenified kernels 2.6.31-2.6.34.7 in paravirtualized domU. Signed-off-by: Samuel Kvasnica Acked-by: Jan Beulich --- a/drivers/xen/scsiback/emulate.c +++ b/drivers/xen/scsiback/emulate.c @@ -28,6 +28,11 @@ * IN THE SOFTWARE. */ +/* +* Patched to support >2TB drives + allow tape & autoloader operations +* 2010, Samuel Kvasnica, IMS Nanofabrication AG +*/ + #include #include #include @@ -384,85 +389,88 @@ void scsiback_emulation_init(void) /* Following commands do not require emulation. */ - NO_EMULATE(TEST_UNIT_READY); /*0x00*/ - NO_EMULATE(REZERO_UNIT); /*0x01*/ + NO_EMULATE(TEST_UNIT_READY); /*0x00*/ /* sd,st */ + NO_EMULATE(REZERO_UNIT); /*0x01*/ /* st */ NO_EMULATE(REQUEST_SENSE); /*0x03*/ NO_EMULATE(FORMAT_UNIT); /*0x04*/ - NO_EMULATE(READ_BLOCK_LIMITS); /*0x05*/ + NO_EMULATE(READ_BLOCK_LIMITS); /*0x05*/ /* st */ /*NO_EMULATE(REASSIGN_BLOCKS); *//*0x07*/ - /*NO_EMULATE(INITIALIZE_ELEMENT_STATUS); *//*0x07*/ - NO_EMULATE(READ_6); /*0x08*/ - NO_EMULATE(WRITE_6); /*0x0a*/ - /*NO_EMULATE(SEEK_6); *//*0x0b*/ + NO_EMULATE(INITIALIZE_ELEMENT_STATUS); /*0x07*/ /* ch */ + NO_EMULATE(READ_6); /*0x08*/ /* sd,st */ + NO_EMULATE(WRITE_6); /*0x0a*/ /* sd,st */ + NO_EMULATE(SEEK_6); /*0x0b*/ /*NO_EMULATE(READ_REVERSE); *//*0x0f*/ - NO_EMULATE(WRITE_FILEMARKS); /*0x10*/ - NO_EMULATE(SPACE); /*0x11*/ + NO_EMULATE(WRITE_FILEMARKS); /*0x10*/ /* st */ + NO_EMULATE(SPACE); /*0x11*/ /* st */ NO_EMULATE(INQUIRY); /*0x12*/ /*NO_EMULATE(RECOVER_BUFFERED_DATA); *//*0x14*/ - /*NO_EMULATE(MODE_SELECT); *//*0x15*/ + NO_EMULATE(MODE_SELECT); /*0x15*/ /* st */ /*NO_EMULATE(RESERVE); *//*0x16*/ /*NO_EMULATE(RELEASE); *//*0x17*/ /*NO_EMULATE(COPY); *//*0x18*/ - NO_EMULATE(ERASE); /*0x19*/ - NO_EMULATE(MODE_SENSE); /*0x1a*/ - /*NO_EMULATE(START_STOP); *//*0x1b*/ - /*NO_EMULATE(RECEIVE_DIAGNOSTIC); *//*0x1c*/ + NO_EMULATE(ERASE); /*0x19*/ /* st */ + NO_EMULATE(MODE_SENSE); /*0x1a*/ /* st */ + NO_EMULATE(START_STOP); /*0x1b*/ /* sd,st */ + NO_EMULATE(RECEIVE_DIAGNOSTIC); /*0x1c*/ NO_EMULATE(SEND_DIAGNOSTIC); /*0x1d*/ - /*NO_EMULATE(ALLOW_MEDIUM_REMOVAL); *//*0x1e*/ + NO_EMULATE(ALLOW_MEDIUM_REMOVAL); /*0x1e*/ /*NO_EMULATE(SET_WINDOW); *//*0x24*/ - NO_EMULATE(READ_CAPACITY); /*0x25*/ - NO_EMULATE(READ_10); /*0x28*/ - NO_EMULATE(WRITE_10); /*0x2a*/ - /*NO_EMULATE(SEEK_10); *//*0x2b*/ - /*NO_EMULATE(POSITION_TO_ELEMENT); *//*0x2b*/ + NO_EMULATE(READ_CAPACITY); /*0x25*/ /* sd */ + NO_EMULATE(READ_10); /*0x28*/ /* sd */ + NO_EMULATE(WRITE_10); /*0x2a*/ /* sd */ + NO_EMULATE(SEEK_10); /*0x2b*/ /* st */ + NO_EMULATE(POSITION_TO_ELEMENT); /*0x2b*/ /* ch */ /*NO_EMULATE(WRITE_VERIFY); *//*0x2e*/ /*NO_EMULATE(VERIFY); *//*0x2f*/ /*NO_EMULATE(SEARCH_HIGH); *//*0x30*/ /*NO_EMULATE(SEARCH_EQUAL); *//*0x31*/ /*NO_EMULATE(SEARCH_LOW); *//*0x32*/ - /*NO_EMULATE(SET_LIMITS); *//*0x33*/ - /*NO_EMULATE(PRE_FETCH); *//*0x34*/ - /*NO_EMULATE(READ_POSITION); *//*0x34*/ - /*NO_EMULATE(SYNCHRONIZE_CACHE); *//*0x35*/ - /*NO_EMULATE(LOCK_UNLOCK_CACHE); *//*0x36*/ - /*NO_EMULATE(READ_DEFECT_DATA); *//*0x37*/ - /*NO_EMULATE(MEDIUM_SCAN); *//*0x38*/ + NO_EMULATE(SET_LIMITS); /*0x33*/ + NO_EMULATE(PRE_FETCH); /*0x34*/ /* st! */ + NO_EMULATE(READ_POSITION); /*0x34*/ /* st */ + NO_EMULATE(SYNCHRONIZE_CACHE); /*0x35*/ /* sd */ + NO_EMULATE(LOCK_UNLOCK_CACHE); /*0x36*/ + NO_EMULATE(READ_DEFECT_DATA); /*0x37*/ + NO_EMULATE(MEDIUM_SCAN); /*0x38*/ /*NO_EMULATE(COMPARE); *//*0x39*/ /*NO_EMULATE(COPY_VERIFY); *//*0x3a*/ - /*NO_EMULATE(WRITE_BUFFER); *//*0x3b*/ - /*NO_EMULATE(READ_BUFFER); *//*0x3c*/ + NO_EMULATE(WRITE_BUFFER); /*0x3b*/ + NO_EMULATE(READ_BUFFER); /*0x3c*/ /* osst */ /*NO_EMULATE(UPDATE_BLOCK); *//*0x3d*/ /*NO_EMULATE(READ_LONG); *//*0x3e*/ /*NO_EMULATE(WRITE_LONG); *//*0x3f*/ /*NO_EMULATE(CHANGE_DEFINITION); *//*0x40*/ /*NO_EMULATE(WRITE_SAME); *//*0x41*/ - /*NO_EMULATE(READ_TOC); *//*0x43*/ - /*NO_EMULATE(LOG_SELECT); *//*0x4c*/ - /*NO_EMULATE(LOG_SENSE); *//*0x4d*/ + NO_EMULATE(READ_TOC); /*0x43*/ /* sr */ + NO_EMULATE(LOG_SELECT); /*0x4c*/ + NO_EMULATE(LOG_SENSE); /*0x4d*/ /* st! */ /*NO_EMULATE(MODE_SELECT_10); *//*0x55*/ /*NO_EMULATE(RESERVE_10); *//*0x56*/ /*NO_EMULATE(RELEASE_10); *//*0x57*/ - /*NO_EMULATE(MODE_SENSE_10); *//*0x5a*/ + NO_EMULATE(MODE_SENSE_10); /*0x5a*/ /* scsi_lib */ /*NO_EMULATE(PERSISTENT_RESERVE_IN); *//*0x5e*/ /*NO_EMULATE(PERSISTENT_RESERVE_OUT); *//*0x5f*/ /* REPORT_LUNS *//*0xa0*//*Full emulaiton*/ - /*NO_EMULATE(MOVE_MEDIUM); *//*0xa5*/ - /*NO_EMULATE(EXCHANGE_MEDIUM); *//*0xa6*/ + NO_EMULATE(MAINTENANCE_IN); /*0xa3*/ /* IFT alua */ + NO_EMULATE(MAINTENANCE_OUT); /*0xa4*/ /* IFT alua */ + NO_EMULATE(MOVE_MEDIUM); /*0xa5*/ /* ch */ + NO_EMULATE(EXCHANGE_MEDIUM); /*0xa6*/ /* ch */ /*NO_EMULATE(READ_12); *//*0xa8*/ /*NO_EMULATE(WRITE_12); *//*0xaa*/ /*NO_EMULATE(WRITE_VERIFY_12); *//*0xae*/ /*NO_EMULATE(SEARCH_HIGH_12); *//*0xb0*/ /*NO_EMULATE(SEARCH_EQUAL_12); *//*0xb1*/ /*NO_EMULATE(SEARCH_LOW_12); *//*0xb2*/ - /*NO_EMULATE(READ_ELEMENT_STATUS); *//*0xb8*/ - /*NO_EMULATE(SEND_VOLUME_TAG); *//*0xb6*/ + NO_EMULATE(READ_ELEMENT_STATUS); /*0xb8*/ /* ch */ + NO_EMULATE(SEND_VOLUME_TAG); /*0xb6*/ /* ch */ /*NO_EMULATE(WRITE_LONG_2); *//*0xea*/ - /*NO_EMULATE(READ_16); *//*0x88*/ - /*NO_EMULATE(WRITE_16); *//*0x8a*/ - /*NO_EMULATE(VERIFY_16); *//*0x8f*/ - /*NO_EMULATE(SERVICE_ACTION_IN); *//*0x9e*/ + NO_EMULATE(READ_16); /*0x88*/ /* sd >2TB */ + NO_EMULATE(WRITE_16); /*0x8a*/ /* sd >2TB */ + NO_EMULATE(VERIFY_16); /*0x8f*/ + NO_EMULATE(SERVICE_ACTION_IN); /*0x9e*/ /* sd >2TB */ +/* st: QFA_REQUEST_BLOCK, QFA_SEEK_BLOCK might be needed ? */ /* Following commands require emulation. */ --- a/drivers/xen/scsifront/scsifront.c +++ b/drivers/xen/scsifront/scsifront.c @@ -357,6 +357,11 @@ static int scsifront_queuecommand(struct int ref_cnt; uint16_t rqid; +/* debug printk to identify more missing scsi commands + printk(KERN_INFO "scsicmd: len=%i, 0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x",sc->cmd_len, + sc->cmnd[0],sc->cmnd[1],sc->cmnd[2],sc->cmnd[3],sc->cmnd[4], + sc->cmnd[5],sc->cmnd[6],sc->cmnd[7],sc->cmnd[8],sc->cmnd[9]); +*/ if (RING_FULL(&info->ring)) { goto out_host_busy; } --- a/drivers/xen/scsifront/xenbus.c +++ b/drivers/xen/scsifront/xenbus.c @@ -27,7 +27,11 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ - + +/* +* Patched to support >2TB drives +* 2010, Samuel Kvasnica, IMS Nanofabrication AG +*/ #include #include "common.h" @@ -219,6 +223,7 @@ static int scsifront_probe(struct xenbus host->max_channel = 0; host->max_lun = VSCSIIF_MAX_LUN; host->max_sectors = (VSCSIIF_SG_TABLESIZE - 1) * PAGE_SIZE / 512; + host->max_cmd_len = VSCSIIF_MAX_COMMAND_SIZE; err = scsi_add_host(host, &dev->dev); if (err) {