[ 0.000000] Reserving virtual address space above 0xffc00000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-31) (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Mar 9 01:27:54 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 000000007f690000 - 000000007f6e0000 (reserved) [ 0.000000] Xen: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] Xen: 000000007f6e3000 - 000000007f6f0000 (ACPI data) [ 0.000000] Xen: 000000007f6f0000 - 000000007f700000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x1000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 037ff000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 100000-2bf000 [ 0.000000] RAMDISK: 01651000 - 02c50c00 [ 0.000000] ACPI: RSDP 000f7c90 00014 (v00 IntelR) [ 0.000000] ACPI: RSDT 7f6e3000 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 7f6e3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 7f6e3100 05122 (v01 INTELR AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 7f6e0000 00040 [ 0.000000] ACPI: IDTS 7f6e82c0 00028 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: MCFG 7f6e8300 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 7f6e8240 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 7f6e89a0 00482 (v01 PmRef CpuPm 00003000 INTL 20050930) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 140MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00010000 - 00016e80 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002d54000 - 0002d72000] XEN PAGETABLES ==> [0002d54000 - 0002d72000] [ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #4 [0001000000 - 000152b8f4] TEXT DATA BSS ==> [0001000000 - 000152b8f4] [ 0.000000] #5 [0001651000 - 0002c50c00] RAMDISK ==> [0001651000 - 0002c50c00] [ 0.000000] #6 [0002c51000 - 0002d54000] XEN START INFO ==> [0002c51000 - 0002d54000] [ 0.000000] #7 [000152c000 - 000152c0a6] BRK ==> [000152c000 - 000152c0a6] [ 0.000000] #8 [0000100000 - 00002a1000] PGTABLE ==> [0000100000 - 00002a1000] [ 0.000000] #9 [0000010000 - 0000017000] BOOTMAP ==> [0000010000 - 0000017000] [ 0.000000] found SMP MP-table at [c00f38d0] f38d0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262031 [ 0.000000] free_area_init_node: node 0, pgdat c13f4d00, node_mem_map c2d72200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 281 pages used for memmap [ 0.000000] HighMem zone: 35561 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7f700000 (gap: 7f700000:60900000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.0 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3579000 s37688 r0 d23752 u65536 [ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] trying to map vcpu_info 0 at c357a010, mfn 7bf7a, offset 16 [ 0.000000] cpu 0 using vcpu_info at c357a010 [ 0.000000] trying to map vcpu_info 1 at c358a010, mfn 7bf8a, offset 16 [ 0.000000] cpu 1 using vcpu_info at c358a010 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259982 [ 0.000000] Kernel command line: placeholder root=UUID=d2f5597b-9c57-4df6-8653-29bb3160cf66 ro acpi_enforce_resources=lax vga=0x31A profile=2 panic=300 [ 0.000000] kernel profiling enabled (shift: 2) [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between c365d000 - c765d000 [ 0.000000] DMA: software IO TLB at phys 0x365d000 - 0x765d000 [ 0.000000] xen_swiotlb_fixup: buf=c365d000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=c76bd000 size=32768 [ 0.000000] Initializing HighMem for node 0 (000373fe:00040000) [ 0.000000] Memory: 941852k/1048576k available (2635k kernel code, 105756k reserved, 1455k data, 404k init, 143368k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff956000 - 0xffbff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff600000 (2048 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13ff000 - 0xc1464000 ( 404 kB) [ 0.000000] .data : 0xc1292d81 - 0xc13feb18 (1455 kB) [ 0.000000] .text : 0xc1000000 - 0xc1292d81 (2635 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1536 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 1995.059 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=7980236) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. [ 0.004000] SMP alternatives: switching to UP code [ 0.004000] ACPI: Core revision 20090903 [ 0.016438] installing Xen timer for CPU 1 [ 0.016534] SMP alternatives: switching to SMP code [ 0.004000] Initializing CPU#1 [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.020136] Brought up 2 CPUs [ 0.020446] CPU0 attaching sched-domain: [ 0.020451] domain 0: span 0-1 level CPU [ 0.020458] groups: 0 1 [ 0.020471] CPU1 attaching sched-domain: [ 0.020476] domain 0: span 0-1 level CPU [ 0.020482] groups: 1 0 [ 0.020580] devtmpfs: initialized [ 0.020580] Grant table initialized [ 0.020580] regulator: core version 0.5 [ 0.020580] NET: Registered protocol family 16 [ 0.020580] ACPI: bus type pci registered [ 0.020580] sync cpu 0 get result 1 max_id 1 [ 0.020580] sync cpu 1 get result 1 max_id 1 [ 0.020580] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.020580] PCI: MCFG area at e0000000 reserved in E820 [ 0.020580] PCI: Using MMCONFIG for extended config space [ 0.020580] PCI: Using configuration type 1 for base access [ 0.021353] bio: create slab at 0 [ 0.026749] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.026842] ACPI: EC: Look up EC in DSDT [ 0.047105] ACPI: Interpreter enabled [ 0.047162] ACPI: (supports S0 S1 S4 S5) [ 0.047385] ACPI: Using IOAPIC for interrupt routing [ 0.061447] ACPI: No dock devices found. [ 0.061681] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.062004] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff] [ 0.062019] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07] [ 0.062034] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.062049] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff] [ 0.062317] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.062447] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.062513] pci 0000:00:1b.0: PME# disabled [ 0.062766] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.062831] pci 0000:00:1c.0: PME# disabled [ 0.063089] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.063154] pci 0000:00:1c.1: PME# disabled [ 0.063412] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.063477] pci 0000:00:1c.2: PME# disabled [ 0.063735] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.063800] pci 0000:00:1c.3: PME# disabled [ 0.063991] pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f] [ 0.064001] pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f] [ 0.064001] pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f] [ 0.064001] pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f] [ 0.064001] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.064001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.064001] pci 0000:00:1d.7: PME# disabled [ 0.064001] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.064001] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.064001] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.064001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) [ 0.064001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) [ 0.064050] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.064067] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.064084] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.064101] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.064118] pci 0000:00:1f.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.064237] pci 0000:00:1f.2: reg 10 io port: [0xf900-0xf907] [ 0.064254] pci 0000:00:1f.2: reg 14 io port: [0xf800-0xf803] [ 0.064271] pci 0000:00:1f.2: reg 18 io port: [0xf700-0xf707] [ 0.064288] pci 0000:00:1f.2: reg 1c io port: [0xf600-0xf603] [ 0.064304] pci 0000:00:1f.2: reg 20 io port: [0xf500-0xf50f] [ 0.064321] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.064385] pci 0000:00:1f.2: PME# supported from D3hot [ 0.064448] pci 0000:00:1f.2: PME# disabled [ 0.064618] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.064816] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd8e0000-0xfd8fffff] [ 0.064856] pci 0000:01:00.0: reg 18 io port: [0xbf00-0xbf1f] [ 0.065027] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.065095] pci 0000:01:00.0: PME# disabled [ 0.065233] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.065516] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff] [ 0.065527] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.065545] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff] [ 0.065682] pci 0000:02:00.0: reg 10 32bit mmio: [0xfdee0000-0xfdefffff] [ 0.065722] pci 0000:02:00.0: reg 18 io port: [0xaf00-0xaf1f] [ 0.065892] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.065960] pci 0000:02:00.0: PME# disabled [ 0.066097] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.066380] pci 0000:00:1c.1: bridge io port: [0xa000-0xafff] [ 0.066391] pci 0000:00:1c.1: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.066408] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.066548] pci 0000:03:00.0: reg 10 32bit mmio: [0xfdce0000-0xfdcfffff] [ 0.066588] pci 0000:03:00.0: reg 18 io port: [0xef00-0xef1f] [ 0.066757] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.066825] pci 0000:03:00.0: PME# disabled [ 0.066962] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.067244] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff] [ 0.067254] pci 0000:00:1c.2: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.067272] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.067408] pci 0000:04:00.0: reg 10 32bit mmio: [0xfdae0000-0xfdafffff] [ 0.067448] pci 0000:04:00.0: reg 18 io port: [0xdf00-0xdf1f] [ 0.067618] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.067686] pci 0000:04:00.0: PME# disabled [ 0.067823] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.068001] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.068001] pci 0000:00:1c.3: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.068001] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.068001] pci 0000:05:00.0: reg 10 32bit mmio: [0xfd7ff000-0xfd7ff1ff] [ 0.068001] pci 0000:05:02.0: reg 10 32bit mmio: [0xfd7e0000-0xfd7effff] [ 0.068001] pci 0000:05:02.0: PME# supported from D0 D3hot [ 0.068001] pci 0000:05:02.0: PME# disabled [ 0.068001] pci 0000:00:1e.0: transparent bridge [ 0.068001] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.068001] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff] [ 0.068001] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff] [ 0.068001] pci_bus 0000:00: on NUMA node 0 [ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.068001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.101252] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.101831] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.102409] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.102987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15) [ 0.103562] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.104137] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.104783] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.105430] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.105943] xen_balloon: Initialising balloon driver with page order 0. [ 0.106090] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.106199] vgaarb: loaded [ 0.106299] PCI: Using ACPI for IRQ routing [ 0.106299] Switching to clocksource xen [ 0.106921] pnp: PnP ACPI init [ 0.106991] ACPI: bus type pnp registered [ 0.108016] xen: registering gsi 8 triggering 1 polarity 0 [ 0.108022] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.108079] xen: --> irq=8 [ 0.108245] xen: registering gsi 13 triggering 1 polarity 0 [ 0.108250] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.108309] xen: --> irq=13 [ 0.109353] xen: registering gsi 4 triggering 1 polarity 0 [ 0.109357] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.109415] xen: --> irq=4 [ 0.110814] xen: registering gsi 1 triggering 1 polarity 0 [ 0.110819] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.110877] xen: --> irq=1 [ 0.113453] pnp: PnP ACPI: found 12 devices [ 0.113509] ACPI: ACPI bus type pnp unregistered [ 0.113566] PnPBIOS: Disabled [ 0.113632] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.113693] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.113754] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.113824] system 00:08: ioport range 0x400-0x4bf could not be reserved [ 0.113892] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.113962] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved [ 0.114025] system 00:0b: iomem range 0x7f6e0000-0x7f6fffff could not be reserved [ 0.114107] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.114169] system 00:0b: iomem range 0x100000-0x7f6dffff could not be reserved [ 0.114250] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.114332] system 00:0b: iomem range 0xfed13000-0xfed1dfff has been reserved [ 0.114394] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.114457] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.114520] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.114582] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 0.114646] system 00:0b: iomem range 0xe0000-0xeffff could not be reserved [ 0.121072] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.121270] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.121333] pci 0000:00:1c.0: IO window: 0xb000-0xbfff [ 0.121399] pci 0000:00:1c.0: MEM window: 0xfd800000-0xfd8fffff [ 0.121464] pci 0000:00:1c.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff [ 0.121555] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.121617] pci 0000:00:1c.1: IO window: 0xa000-0xafff [ 0.121684] pci 0000:00:1c.1: MEM window: 0xfde00000-0xfdefffff [ 0.121749] pci 0000:00:1c.1: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.121840] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.121901] pci 0000:00:1c.2: IO window: 0xe000-0xefff [ 0.121968] pci 0000:00:1c.2: MEM window: 0xfdc00000-0xfdcfffff [ 0.122033] pci 0000:00:1c.2: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.122124] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04 [ 0.122186] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 0.122252] pci 0000:00:1c.3: MEM window: 0xfda00000-0xfdafffff [ 0.122317] pci 0000:00:1c.3: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.122409] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.122471] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.122537] pci 0000:00:1e.0: MEM window: 0xfd700000-0xfd7fffff [ 0.122602] pci 0000:00:1e.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff [ 0.122710] xen: registering gsi 16 triggering 0 polarity 1 [ 0.122728] xen: --> irq=16 [ 0.122738] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.122805] pci 0000:00:1c.0: setting latency timer to 64 [ 0.122828] xen: registering gsi 17 triggering 0 polarity 1 [ 0.122836] xen: --> irq=17 [ 0.122843] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.122910] pci 0000:00:1c.1: setting latency timer to 64 [ 0.122933] xen: registering gsi 18 triggering 0 polarity 1 [ 0.122941] xen: --> irq=18 [ 0.122949] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.123016] pci 0000:00:1c.2: setting latency timer to 64 [ 0.123038] xen: registering gsi 19 triggering 0 polarity 1 [ 0.123047] xen: --> irq=19 [ 0.123054] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.123121] pci 0000:00:1c.3: setting latency timer to 64 [ 0.123140] pci 0000:00:1e.0: setting latency timer to 64 [ 0.123148] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.123154] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.123159] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.123164] pci_bus 0000:01: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.123169] pci_bus 0000:01: resource 2 pref mem [0xfd500000-0xfd5fffff] [ 0.123174] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.123179] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.123184] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.123189] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.123194] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.123199] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.123204] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.123209] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.123214] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.123219] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 0.123223] pci_bus 0000:05: resource 1 mem: [0xfd700000-0xfd7fffff] [ 0.123228] pci_bus 0000:05: resource 2 pref mem [0xfd600000-0xfd6fffff] [ 0.123233] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.123238] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.123270] NET: Registered protocol family 2 [ 0.123414] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.123814] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.124467] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.124800] TCP: Hash tables configured (established 131072 bind 65536) [ 0.124861] TCP reno registered [ 0.125004] NET: Registered protocol family 1 [ 0.125055] pci 0000:00:02.0: Boot video device [ 0.125377] Unpacking initramfs... [ 0.214490] Freeing initrd memory: 22527k freed [ 0.229643] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.229720] DMA: Placing 64MB software IO TLB between c365d000 - c765d000 [ 0.229780] DMA: software IO TLB at phys 0x365d000 - 0x765d000 [ 0.230442] audit: initializing netlink socket (disabled) [ 0.230525] type=2000 audit(1303162962.694:1): initialized [ 0.234489] highmem bounce pool size: 64 pages [ 0.234550] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.237003] VFS: Disk quotas dquot_6.5.2 [ 0.237146] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.237352] msgmni has been set to 1604 [ 0.237786] alg: No test for stdrng (krng) [ 0.237927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.238008] io scheduler noop registered [ 0.238062] io scheduler anticipatory registered [ 0.238118] io scheduler deadline registered [ 0.238223] io scheduler cfq registered (default) [ 0.238682] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.239041] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.239402] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.239757] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.240177] isapnp: Scanning for PnP cards... [ 0.596344] isapnp: No Plug & Play device found [ 0.602939] registering netback [ 0.605624] Linux agpgart interface v0.103 [ 0.605811] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 0.607957] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 0.611317] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.611499] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.611730] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.612288] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.612589] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.612649] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.613061] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.613806] mice: PS/2 mouse device common for all mice [ 0.613951] rtc_cmos 00:03: RTC can wake from S4 [ 0.614074] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.614178] rtc0: alarms up to one month, 242 bytes nvram [ 0.614251] cpuidle: using governor ladder [ 0.614306] cpuidle: using governor menu [ 0.614364] No iBFT detected. [ 0.614760] TCP cubic registered [ 0.615028] NET: Registered protocol family 10 [ 0.615881] Mobile IPv6 [ 0.615934] NET: Registered protocol family 17 [ 0.616005] Using IPI No-Shortcut mode [ 0.616166] PM: Resume from disk failed. [ 0.616187] registered taskstats version 1 [ 0.617275] rtc_cmos 00:03: setting system clock to 2011-04-18 21:42:42 UTC (1303162962) [ 0.617406] Initalizing network drop monitor service [ 0.617508] Freeing unused kernel memory: 404k freed [ 0.618704] Write protecting the kernel text: 2636k [ 0.619135] Write protecting the kernel read-only data: 968k [ 0.638577] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.665160] udev[62]: starting version 164 [ 0.757819] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.757900] ACPI: Thermal Zone [TZ00] (58 C) [ 0.758876] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.758952] ACPI: Thermal Zone [THRM] (40 C) [ 0.885605] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.885672] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.885822] xen: registering gsi 16 triggering 0 polarity 1 [ 0.885828] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.885885] xen: --> irq=16 [ 0.885894] Already setup the GSI :16 [ 0.885949] e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.886076] e1000e 0000:01:00.0: setting latency timer to 64 [ 0.891852] usbcore: registered new interface driver usbfs [ 0.891945] usbcore: registered new interface driver hub [ 0.892077] usbcore: registered new device driver usb [ 0.905174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.905281] xen: registering gsi 23 triggering 0 polarity 1 [ 0.905298] xen: --> irq=23 [ 0.905309] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.906349] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.906357] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.906449] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.906596] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.906677] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.910625] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.912855] SCSI subsystem initialized [ 0.922260] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 0.936318] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.936426] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.936488] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.936567] usb usb1: Product: EHCI Host Controller [ 0.936624] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 ehci_hcd [ 0.936683] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.936846] usb usb1: configuration #1 chosen from 1 choice [ 0.936953] hub 1-0:1.0: USB hub found [ 0.937034] hub 1-0:1.0: 8 ports detected [ 0.945040] fan PNP0C0B:00: registered as cooling_device0 [ 0.945111] ACPI: Fan [FAN] (on) [ 0.947888] uhci_hcd: USB Universal Host Controller Interface driver [ 0.947995] xen: registering gsi 23 triggering 0 polarity 1 [ 0.948000] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.948057] xen: --> irq=23 [ 0.948081] Already setup the GSI :23 [ 0.948136] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.948209] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.948218] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.948287] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.948413] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 [ 0.948570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.948631] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.948710] usb usb2: Product: UHCI Host Controller [ 0.948766] usb usb2: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd [ 0.948825] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.948980] usb usb2: configuration #1 chosen from 1 choice [ 0.949087] hub 2-0:1.0: USB hub found [ 0.949162] hub 2-0:1.0: 2 ports detected [ 0.949307] xen: registering gsi 19 triggering 0 polarity 1 [ 0.949312] xen_allocate_pirq: returning irq 19 for gsi 19 [ 0.949370] xen: --> irq=19 [ 0.949375] Already setup the GSI :19 [ 0.949430] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.949500] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.949509] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.949576] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.949720] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 [ 0.949873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.949939] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.950022] usb usb3: Product: UHCI Host Controller [ 0.950082] usb usb3: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd [ 0.950143] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.950300] usb usb3: configuration #1 chosen from 1 choice [ 0.950405] hub 3-0:1.0: USB hub found [ 0.950478] hub 3-0:1.0: 2 ports detected [ 0.950621] xen: registering gsi 18 triggering 0 polarity 1 [ 0.950626] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.950683] xen: --> irq=18 [ 0.950689] Already setup the GSI :18 [ 0.950743] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.950814] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.950822] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.950891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.951029] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 [ 0.951180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.951243] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.951322] usb usb4: Product: UHCI Host Controller [ 0.951378] usb usb4: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd [ 0.951437] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.951586] usb usb4: configuration #1 chosen from 1 choice [ 0.951691] hub 4-0:1.0: USB hub found [ 0.951765] hub 4-0:1.0: 2 ports detected [ 0.951905] xen: registering gsi 16 triggering 0 polarity 1 [ 0.951909] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.951967] xen: --> irq=16 [ 0.951973] Already setup the GSI :16 [ 0.952026] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.952071] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.952071] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.952071] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.952551] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 [ 0.952703] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.952766] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.952845] usb usb5: Product: UHCI Host Controller [ 0.952900] usb usb5: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd [ 0.952959] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.953115] usb usb5: configuration #1 chosen from 1 choice [ 0.953221] hub 5-0:1.0: USB hub found [ 0.953295] hub 5-0:1.0: 2 ports detected [ 0.954491] libata version 3.00 loaded. [ 0.957795] ata_piix 0000:00:1f.1: version 2.13 [ 0.957816] xen: registering gsi 18 triggering 0 polarity 1 [ 0.957820] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.957880] xen: --> irq=18 [ 0.957886] Already setup the GSI :18 [ 0.957943] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.958068] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.958209] scsi0 : ata_piix [ 0.958504] scsi1 : ata_piix [ 0.960611] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 0.960678] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 0.960897] xen: registering gsi 19 triggering 0 polarity 1 [ 0.960902] xen_allocate_pirq: returning irq 19 for gsi 19 [ 0.960965] xen: --> irq=19 [ 0.960972] Already setup the GSI :19 [ 0.961040] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.961302] ata_piix 0000:00:1f.2: MAP [ [ 0.961337] ata2: port disabled. ignoring. [ 0.961387] P0 P2 -- -- ] [ 1.001031] 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:f7 [ 1.001115] 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.001247] 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff [ 1.001401] xen: registering gsi 17 triggering 0 polarity 1 [ 1.001406] xen_allocate_pirq: returning irq 17 for gsi 17 [ 1.001464] xen: --> irq=17 [ 1.001470] Already setup the GSI :17 [ 1.001525] e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.001649] e1000e 0000:02:00.0: setting latency timer to 64 [ 1.116818] 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:f8 [ 1.116899] 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 1.117031] 0000:02:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff [ 1.117094] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.117171] xen: registering gsi 18 triggering 0 polarity 1 [ 1.117175] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.117207] scsi2 : ata_piix [ 1.117285] xen: --> irq=18 [ 1.117293] Already setup the GSI :18 [ 1.117320] scsi3 : ata_piix [ 1.117399] e1000e 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.117664] e1000e 0000:03:00.0: setting latency timer to 64 [ 1.119020] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19 [ 1.119093] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19 [ 1.146438] ata1.00: CFA: TRANSCEND, 20091215, max UDMA/66 [ 1.146497] ata1.00: 31293360 sectors, multi 0: LBA [ 1.192284] ata1.01: ATA-8: WDC WD3200BEVE-00A0HT0, 11.01A11, max UDMA/100 [ 1.192371] ata1.01: 625142448 sectors, multi 16: LBA48 [ 1.208466] ata1.00: configured for UDMA/66 [ 1.217596] ata1.01: configured for UDMA/100 [ 1.232461] ata1.00: configured for UDMA/66 [ 1.241338] 0000:03:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:f9 [ 1.241419] 0000:03:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 1.241557] 0000:03:00.0: eth2: MAC: 2, PHY: 2, PBA No: ffffff-0ff [ 1.241684] xen: registering gsi 19 triggering 0 polarity 1 [ 1.241689] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.241747] xen: --> irq=19 [ 1.241753] Already setup the GSI :19 [ 1.241807] e1000e 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.241928] e1000e 0000:04:00.0: setting latency timer to 64 [ 1.249597] ata1.01: configured for UDMA/100 [ 1.249680] ata1: EH complete [ 1.250027] scsi 0:0:0:0: Direct-Access ATA TRANSCEND 2009 PQ: 0 ANSI: 5 [ 1.250556] scsi 0:0:1:0: Direct-Access ATA WDC WD3200BEVE-0 11.0 PQ: 0 ANSI: 5 [ 1.311392] sd 0:0:0:0: [sda] 31293360 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.311500] sd 0:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.311852] sd 0:0:1:0: [sdb] Write Protect is off [ 1.311910] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.311978] sd 0:0:0:0: [sda] Write Protect is off [ 1.312035] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.312140] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.312305] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.312886] sdb: [ 1.319688] sda: sdb1 sdb2 sdb3 sdb4 [ 1.320472] sda1 [ 1.321037] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.321290] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.366003] 0000:04:00.0: eth3: (PCI Express:2.5GB/s:Width x1) 00:06:4f:8f:96:fa [ 1.366089] 0000:04:00.0: eth3: Intel(R) PRO/1000 Network Connection [ 1.366226] 0000:04:00.0: eth3: MAC: 2, PHY: 2, PBA No: ffffff-0ff [ 1.852799] device-mapper: uevent: version 1.0.3 [ 1.853054] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 1.885659] EXT3-fs: INFO: recovery required on readonly filesystem. [ 1.885747] EXT3-fs: write access will be enabled during recovery. [ 14.704893] kjournald starting. Commit interval 5 seconds [ 14.704920] EXT3-fs: recovery complete. [ 14.707519] EXT3-fs: mounted filesystem with ordered data mode. [ 15.079319] udev[328]: starting version 164 [ 15.209838] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 15.209929] ACPI: Power Button [PWRB] [ 15.210073] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 15.210167] ACPI: Sleep Button [SLPB] [ 15.211271] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 15.211354] ACPI: Power Button [PWRF] [ 15.213824] ACPI: SSDT 7f6e8380 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20050930) [ 15.271605] ACPI: SSDT 7f6e8840 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20050930) [ 15.474905] xen: registering gsi 19 triggering 0 polarity 1 [ 15.474911] xen_allocate_pirq: returning irq 19 for gsi 19 [ 15.474971] xen: --> irq=19 [ 15.474979] Already setup the GSI :19 [ 15.475034] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 15.500975] [drm] Initialized drm 1.1.0 20060810 [ 15.505991] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 15.506661] intel_rng: Firmware space is locked read-only. If you can't or [ 15.506663] intel_rng: don't want to disable this in firmware setup, and if [ 15.506665] intel_rng: you are certain that your system has a functional [ 15.506667] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 15.577594] cfg80211: Using static regulatory domain info [ 15.577658] cfg80211: Regulatory domain: US [ 15.577714] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.577796] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 15.577861] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.577927] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.577989] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.578050] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 15.578112] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 15.578184] cfg80211: Calling CRDA for country: US [ 15.578268] cfg80211: Calling CRDA for country: AT [ 16.105282] xen: registering gsi 16 triggering 0 polarity 1 [ 16.105288] xen_allocate_pirq: returning irq 16 for gsi 16 [ 16.105349] xen: --> irq=16 [ 16.105357] Already setup the GSI :16 [ 16.105411] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.105479] i915 0000:00:02.0: setting latency timer to 64 [ 16.118160] [drm] set up 7M of stolen space [ 16.121140] [drm] initialized overlay support [ 16.163350] xen: registering gsi 18 triggering 0 polarity 1 [ 16.163357] xen_allocate_pirq: returning irq 18 for gsi 18 [ 16.163417] xen: --> irq=18 [ 16.163425] Already setup the GSI :18 [ 16.163479] ath9k 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 16.165671] Linux video capture interface: v2.00 [ 16.421085] Console: switching to colour frame buffer device 128x48 [ 16.424968] fb0: inteldrmfb frame buffer device [ 16.425005] registered panic notifier [ 16.425044] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 17.728936] ath: EEPROM regdomain: 0x809c [ 17.728940] ath: EEPROM indicates we should expect a country code [ 17.728945] ath: doing EEPROM country->regdmn map search [ 17.728949] ath: country maps to regdmn code: 0x52 [ 17.728953] ath: Country alpha2 being used: CN [ 17.728957] ath: Regpair used: 0x52 [ 17.812597] saa7146: register extension 'budget_av'. [ 17.823531] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 17.824416] Registered led device: ath9k-phy0::radio [ 17.824501] Registered led device: ath9k-phy0::assoc [ 17.824571] Registered led device: ath9k-phy0::tx [ 17.824639] Registered led device: ath9k-phy0::rx [ 17.824687] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf8220000, irq=18 [ 17.825316] cfg80211: Calling CRDA for country: CN [ 17.825406] xen: registering gsi 16 triggering 0 polarity 1 [ 17.825412] xen_allocate_pirq: returning irq 16 for gsi 16 [ 17.825458] xen: --> irq=16 [ 17.825466] Already setup the GSI :16 [ 17.825499] budget_av 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.825563] budget_av 0000:05:00.0: setting latency timer to 64 [ 17.825596] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs [ 17.825687] saa7146: found saa7146 @ mem f7f32000 (revision 1, irq 16) (0x153b,0x1156). [ 17.825762] saa7146 (0): dma buffer size 1347584 [ 17.825801] DVB: registering new adapter (Terratec Cinergy 1200 DVB-C) [ 17.862664] adapter failed MAC signature check [ 17.862711] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 17.962975] xen: registering gsi 16 triggering 0 polarity 1 [ 17.962981] xen_allocate_pirq: returning irq 16 for gsi 16 [ 17.963037] xen: --> irq=16 [ 17.963045] Already setup the GSI :16 [ 17.963077] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.963177] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.132504] KNC1-0: MAC addr = 00:0a:ac:01:da:a5 [ 18.284848] TDA10021: i2c-addr = 0x0c, id = 0x7c [ 18.286766] DVB: registering adapter 0 frontend 0 (Philips TDA10021 DVB-C)... [ 18.289344] budget-av: ci interface initialised. [ 19.014817] EXT3 FS on sda1, internal journal [ 19.148103] it87: Found IT8712F chip at 0x290, revision 7 [ 19.149942] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] [ 19.151763] ACPI: This conflict may cause random problems and system instability [ 19.152068] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 19.155852] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface [ 21.049232] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 21.183675] EXT4-fs (sdb2): mounted filesystem with ordered data mode [ 21.293167] EXT4-fs (sdb3): mounted filesystem with ordered data mode [ 21.466009] EXT4-fs (sdb4): mounted filesystem with ordered data mode [ 22.150222] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.698632] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 23.701681] 0000:01:00.0: eth0: 10/100 speed: disabling TSO [ 23.705199] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.553281] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.673331] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.038121] fuse init (API version 7.13) [ 32.090719] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 32.092055] 0000:02:00.0: eth1: 10/100 speed: disabling TSO [ 32.094300] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 34.404071] eth0: no IPv6 routers present [ 42.436064] eth1: no IPv6 routers present [ 42.513064] wlan0: no IPv6 routers present [ 72.001525] ip_tables: (C) 2000-2006 Netfilter Core Team [ 72.058421] nf_conntrack version 0.5.0 (16314 buckets, 65256 max) [ 72.061192] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 72.063049] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 72.064347] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 89.793700] RPC: Registered udp transport module. [ 89.795495] RPC: Registered tcp transport module. [ 89.797240] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 89.854877] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 89.902551] svc: failed to register lockdv1 RPC service (errno 97). [ 89.906995] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 89.910855] NFSD: starting 90-second grace period [ 90.320108] Event-channel device installed. [ 90.364283] XENBUS: Unable to read cpu state [ 90.366462] XENBUS: Unable to read cpu state [ 90.811765] Bridge firewalling registered [ 91.121936] ADDRCONF(NETDEV_UP): peth1: link is not ready [ 92.715640] e1000e: peth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 92.717062] 0000:02:00.0: peth1: 10/100 speed: disabling TSO [ 92.723814] ADDRCONF(NETDEV_CHANGE): peth1: link becomes ready [ 93.152206] device peth1 entered promiscuous mode [ 93.198488] eth1: port 1(peth1) entering forwarding state [ 103.044076] peth1: no IPv6 routers present [ 103.881072] eth1: no IPv6 routers present [ 126.166460] virbr0: starting userspace STP failed, starting kernel STP [ 126.759180] Ebtables v2.0 registered [ 127.114265] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 905.904174] device vif1.0 entered promiscuous mode [ 905.909892] virbr0: topology change detected, propagating [ 905.911757] virbr0: port 1(vif1.0) entering forwarding state [ 905.917870] loop: module loaded [ 915.921065] vif1.0: no IPv6 routers present [ 916.895537] blkback: ring-ref 770, event-channel 9, protocol 3 (x86_64-abi) [ 930.460719] virbr0: port 1(vif1.0) entering disabled state [ 930.468400] virbr0: port 1(vif1.0) entering disabled state [ 1169.220399] tun: Universal TUN/TAP device driver, 1.6 [ 1169.222114] tun: (C) 1999-2004 Max Krasnyansky [ 1169.264429] device tap2.0 entered promiscuous mode [ 1169.279477] virbr0: topology change detected, propagating [ 1169.281058] virbr0: port 1(tap2.0) entering forwarding state [ 1169.443943] device vif2.0 entered promiscuous mode [ 1169.457219] virbr0: port 1(tap2.0) entering disabled state [ 1169.464390] virbr0: topology change detected, propagating [ 1169.466185] virbr0: port 2(vif2.0) entering forwarding state [ 1169.484657] virbr0: topology change detected, propagating [ 1169.486488] virbr0: port 1(tap2.0) entering forwarding state [ 1172.848056] hrtimer: interrupt took 2283856125 ns [ 1175.458370] saa7146 (0) vpeirq: used 1 times >80% of buffer (1113900 bytes now) [ 1210.374613] vif2.0: no IPv6 routers present [ 1210.374619] tap2.0: no IPv6 routers present [ 1210.376281] saa7146 (0) vpeirq: used 2 times >80% of buffer (575092 bytes now) [ 1260.137497] saa7146 (0) vpeirq: used 2 times >80% of buffer (740908 bytes now) [ 1297.648393] saa7146 (0) vpeirq: used 1 times >80% of buffer (85352 bytes now) [ 1311.985216] virbr0: port 1(tap2.0) entering disabled state [ 1312.000599] virbr0: port 1(tap2.0) entering disabled state [ 1312.244630] virbr0: port 2(vif2.0) entering disabled state [ 1312.256479] virbr0: port 2(vif2.0) entering disabled state [ 1326.424963] saa7146 (0) vpeirq: used 2 times >80% of buffer (65048 bytes now) [ 1416.275503] device tap3.0 entered promiscuous mode [ 1416.277060] virbr0: topology change detected, propagating [ 1416.277060] virbr0: port 1(tap3.0) entering forwarding state [ 1416.492615] virbr0: port 1(tap3.0) entering disabled state [ 1416.526143] virbr0: topology change detected, propagating [ 1416.527796] virbr0: port 1(tap3.0) entering forwarding state [ 1416.553710] device vif3.0 entered promiscuous mode [ 1416.562676] virbr0: topology change detected, propagating [ 1416.564318] virbr0: port 2(vif3.0) entering forwarding state [ 1424.220546] saa7146 (0) vpeirq: used 1 times >80% of buffer (1345328 bytes now) [ 1430.479973] vif3.0: no IPv6 routers present [ 1440.046405] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1454.108787] saa7146 (0) vpeirq: used 10 times >80% of buffer (1244560 bytes now) [ 1454.435359] tap3.0: no IPv6 routers present [ 1467.745323] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1467.985651] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1468.226131] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1468.346413] DVB: TDA10021: tda10021_readreg: readreg error (ret == -5) [ 1468.466672] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1468.706852] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1468.947740] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1469.187644] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1469.307792] DVB: TDA10021: tda10021_readreg: readreg error (ret == -5) [ 1469.427962] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1469.668459] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1469.908705] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1470.149577] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1470.269517] tda10021: lock tuner fails [ 1470.389697] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1470.630039] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1470.870956] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1471.110741] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1471.351494] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1471.591513] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1471.831835] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1472.072259] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1472.192420] tda10021: unlock tuner fails [ 1472.312646] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1472.553549] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1472.793546] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1473.033812] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1473.154701] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x03, val == 0x0a, ret == -5) [ 1473.394290] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1473.634730] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1473.875316] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1474.115438] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1474.235813] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0a, val == 0xc4, ret == -5) [ 1474.476057] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1474.716431] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1474.957672] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1475.197371] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1475.317568] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0b, val == 0x6d, ret == -5) [ 1475.557776] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1527.377284] saa7146 (0) vpeirq: used 1 times >80% of buffer (1229896 bytes now) [ 1565.293135] BUG: soft lockup - CPU#0 stuck for 63s! [qemu-dm:10941] [ 1565.293135] Modules linked in: tun xt_physdev loop ip6table_filter ip6_tables ebtable_nat ebtables ipt_REJECT bridge stp xen_evtchn xenfs nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs xt_recent ipt_MASQUERADE xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables fuse ext4 jbd2 crc16 it87 hwmon_vid coretemp tda10021 snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi budget_av arc4 snd_rawmidi ecb snd_seq_midi_event snd_seq saa7146_vv videodev ath9k v4l1_compat mac80211 videobuf_dma_sg snd_timer videobuf_core ath budget_core snd_seq_device i915 dvb_core cfg80211 rfkill saa7146 drm_kms_helper ttpci_eeprom led_class pcspkr rng_core snd evdev i2c_i801 drm i2c_algo_bit soundcore snd_page_alloc i2c_core button processor video output acpi_processor ext3 jbd mbcache dm_mod sd_mod crc_t10dif ata_generic ata_piix uhci_hcd fan libata ehci_hcd scsi_mod e1000e usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan] [ 1565.293135] [ 1565.293135] Pid: 10941, comm: qemu-dm Not tainted (2.6.32-5-xen-686 #1) 945GM/E-ITE8712 [ 1565.293135] EIP: 0061:[] EFLAGS: 00200246 CPU: 0 [ 1565.293135] EIP is at hypercall_page+0x227/0x1001 [ 1565.293135] EAX: 00040001 EBX: 00000000 ECX: 00000000 EDX: c357d7b4 [ 1565.293135] ESI: 00000009 EDI: 00000028 EBP: c13959e4 ESP: dc879ac0 [ 1565.293135] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069 [ 1565.293135] CR0: 8005003b CR2: b7815000 CR3: 1c993000 CR4: 00002660 [ 1565.297135] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1565.297135] DR6: ffff0ff0 DR7: 00000400 [ 1565.297135] Call Trace: [ 1565.297135] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1565.297135] [] ? check_events+0x8/0xc [ 1565.297135] [] ? xen_irq_enable_direct_end+0x0/0x1 [ 1565.297135] [] ? __do_softirq+0x4b/0x156 [ 1565.297135] [] ? do_softirq+0x31/0x3c [ 1565.297135] [] ? irq_exit+0x26/0x58 [ 1565.297135] [] ? xen_evtchn_do_upcall+0x22/0x2c [ 1565.297135] [] ? xen_do_upcall+0x7/0xc [ 1565.297135] [] ? fget_light+0x4b/0x77 [ 1565.297135] [] ? do_select+0x25e/0x42d [ 1565.297135] [] ? __pollwait+0x0/0xa5 [ 1565.297135] [] ? pollwake+0x0/0x65 [ 1565.297135] [] ? pollwake+0x0/0x65 [ 1565.297135] [] ? pollwake+0x0/0x65 [ 1565.297135] [] ? pollwake+0x0/0x65 [ 1565.297135] [] ? pollwake+0x0/0x65 [ 1565.297135] [] ? pollwake+0x0/0x65 [ 1565.297135] [] ? tick_program_event+0x1f/0x23 [ 1565.297135] [] ? hrtimer_interrupt+0x117/0x1cf [ 1565.297135] [] ? xen_timer_interrupt+0x248/0x257 [ 1565.297135] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1565.297135] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1565.297135] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1565.297135] [] ? check_events+0x8/0xc [ 1565.297135] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1565.297135] [] ? check_for_new_grace_period+0x80/0x89 [ 1565.297135] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1565.297135] [] ? rcu_process_gp_end+0x33/0x63 [ 1565.297135] [] ? __rcu_process_callbacks+0x6c/0x227 [ 1565.297135] [] ? rcu_process_callbacks+0x33/0x39 [ 1565.297135] [] ? __do_softirq+0x128/0x156 [ 1565.297135] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1565.297135] [] ? check_events+0x8/0xc [ 1565.297135] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1565.297135] [] ? do_softirq+0x39/0x3c [ 1565.297135] [] ? irq_exit+0x36/0x58 [ 1565.297135] [] ? xen_evtchn_do_upcall+0x22/0x2c [ 1565.297135] [] ? xen_do_upcall+0x7/0xc [ 1565.297135] [] ? core_sys_select+0x13e/0x1c2 [ 1565.297135] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1565.297135] [] ? get_page_from_freelist+0x2ab/0x3c7 [ 1565.297135] [] ? copy_from_user+0x27/0x10e [ 1565.297135] [] ? privcmd_ioctl+0x6f/0x34e [xenfs] [ 1565.297135] [] ? HYPERVISOR_event_channel_op+0x15/0x4c [xen_evtchn] [ 1565.297135] [] ? evtchn_ioctl+0x283/0x28c [xen_evtchn] [ 1565.297135] [] ? pvclock_clocksource_read+0xf9/0x10f [ 1565.297135] [] ? ktime_get_ts+0xcd/0xd5 [ 1565.297135] [] ? sys_select+0x6e/0x8f [ 1565.297135] [] ? sysenter_do_call+0x12/0x28 [ 1565.455372] saa7146 (0) vpeirq: used 1 times >80% of buffer (616828 bytes now) [ 1582.434416] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1583.936868] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1586.941631] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1588.804591] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1599.621480] saa7146 (0) vpeirq: used 1 times >80% of buffer (1130820 bytes now) [ 1628.343801] DVB: TDA10021: tda10021_readreg: readreg error (ret == -5) [ 1628.464993] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1628.704177] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1628.944676] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1629.184982] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1629.305264] tda10021: lock tuner fails [ 1629.426010] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1629.666341] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1629.906212] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1630.146553] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1630.386937] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1630.627439] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1630.868188] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1631.108182] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1631.228365] tda10021: unlock tuner fails [ 1631.348687] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1631.588925] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1631.829496] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1632.069754] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1632.190510] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x03, val == 0x0a, ret == -5) [ 1632.430375] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1632.670718] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1632.911639] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1633.151503] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1633.271732] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0a, val == 0xc4, ret == -5) [ 1633.512786] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1633.752430] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1633.993019] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1634.233253] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1634.353902] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0b, val == 0x6d, ret == -5) [ 1634.593772] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1634.834171] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1635.075061] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1635.314891] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1635.435181] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0c, val == 0x1e, ret == -5) [ 1635.675464] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1635.915814] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1636.156389] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1636.396591] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer [ 1636.517254] DVB: TDA10021(0): _tda10021_writereg, writereg error (reg == 0x0d, val == 0x87, ret == -5) [ 1636.400327] BUG: soft lockup - CPU#0 stuck for 66s! [qemu-dm:10941] [ 1636.400327] Modules linked in: tun xt_physdev loop ip6table_filter ip6_tables ebtable_nat ebtables ipt_REJECT bridge stp xen_evtchn xenfs nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs xt_recent ipt_MASQUERADE xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables fuse ext4 jbd2 crc16 it87 hwmon_vid coretemp tda10021 snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi budget_av arc4 snd_rawmidi ecb snd_seq_midi_event snd_seq saa7146_vv videodev ath9k v4l1_compat mac80211 videobuf_dma_sg snd_timer videobuf_core ath budget_core snd_seq_device i915 dvb_core cfg80211 rfkill saa7146 drm_kms_helper ttpci_eeprom led_class pcspkr rng_core snd evdev i2c_i801 drm i2c_algo_bit soundcore snd_page_alloc i2c_core button processor video output acpi_processor ext3 jbd mbcache dm_mod sd_mod crc_t10dif ata_generic ata_piix uhci_hcd fan libata ehci_hcd scsi_mod e1000e usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan] [ 1636.400327] [ 1636.400327] Pid: 10941, comm: qemu-dm Not tainted (2.6.32-5-xen-686 #1) 945GM/E-ITE8712 [ 1636.400327] EIP: 0061:[] EFLAGS: 00200297 CPU: 0 [ 1636.400327] EIP is at _spin_lock+0x12/0x15 [ 1636.400327] EAX: c2a2bcc8 EBX: f8682000 ECX: 000002e4 EDX: 00003f3e [ 1636.400327] ESI: c2a2badc EDI: 000002e4 EBP: 000000bc ESP: dc879a58 [ 1636.400327] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069 [ 1636.400327] CR0: 8005003b CR2: 08cf204c CR3: 1c993000 CR4: 00002660 [ 1636.400327] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1636.400327] DR6: ffff0ff0 DR7: 00000400 [ 1636.400327] Call Trace: [ 1636.400327] [] ? dvb_dmx_swfilter_packets+0x14/0x3b [dvb_core] [ 1636.400327] [] ? vpeirq+0x107/0x16c [budget_core] [ 1636.400327] [] ? tasklet_action+0x67/0xad [ 1636.400327] [] ? __do_softirq+0xaa/0x156 [ 1636.400327] [] ? do_softirq+0x31/0x3c [ 1636.400327] [] ? irq_exit+0x26/0x58 [ 1636.400327] [] ? xen_evtchn_do_upcall+0x22/0x2c [ 1636.400327] [] ? xen_do_upcall+0x7/0xc [ 1636.400327] [] ? hypercall_page+0x227/0x1001 [ 1636.400327] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1636.400327] [] ? check_events+0x8/0xc [ 1636.400327] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1636.400327] [] ? _spin_unlock_irqrestore+0xd/0xf [ 1636.400327] [] ? tcp_poll+0x15/0x134 [ 1636.400327] [] ? sock_poll+0xc/0xe [ 1636.400327] [] ? do_select+0x2a1/0x42d [ 1636.400327] [] ? __pollwait+0x0/0xa5 [ 1636.400327] [] ? pollwake+0x0/0x65 [ 1636.400327] [] ? pollwake+0x0/0x65 [ 1636.400327] [] ? pollwake+0x0/0x65 [ 1636.400327] [] ? pollwake+0x0/0x65 [ 1636.400327] [] ? pollwake+0x0/0x65 [ 1636.400327] [] ? pollwake+0x0/0x65 [ 1636.400327] [] ? resched_task+0x58/0x5a [ 1636.400327] [] ? check_preempt_wakeup+0x196/0x202 [ 1636.400327] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1636.400327] [] ? check_events+0x8/0xc [ 1636.400327] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1636.400327] [] ? _spin_unlock_irqrestore+0xd/0xf [ 1636.400327] [] ? try_to_wake_up+0x2a7/0x2b3 [ 1636.400327] [] ? pollwake+0x5c/0x65 [ 1636.400327] [] ? default_wake_function+0x0/0x8 [ 1636.400327] [] ? __wake_up_common+0x34/0x59 [ 1636.400327] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1636.400327] [] ? check_events+0x8/0xc [ 1636.400327] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1636.400327] [] ? _spin_unlock_irqrestore+0xd/0xf [ 1636.400327] [] ? dvb_dmxdev_ts_callback+0x93/0x9c [dvb_core] [ 1636.400327] [] ? dvb_dmx_swfilter_packet+0x20e/0x3cf [dvb_core] [ 1636.400327] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1636.400327] [] ? xen_force_evtchn_callback+0xc/0x10 [ 1636.400327] [] ? check_events+0x8/0xc [ 1636.400327] [] ? evtchn_interrupt+0xa6/0xc2 [xen_evtchn] [ 1636.400327] [] ? handle_IRQ_event+0xf7/0x101 [ 1636.400327] [] ? copy_from_user+0x27/0x10e [ 1636.400327] [] ? core_sys_select+0x13e/0x1c2 [ 1636.400327] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 1636.400327] [] ? get_page_from_freelist+0x2ab/0x3c7 [ 1636.400327] [] ? copy_from_user+0x27/0x10e [ 1636.400327] [] ? privcmd_ioctl+0x6f/0x34e [xenfs] [ 1636.400327] [] ? HYPERVISOR_event_channel_op+0x15/0x4c [xen_evtchn] [ 1636.400327] [] ? evtchn_ioctl+0x283/0x28c [xen_evtchn] [ 1636.400327] [] ? pvclock_clocksource_read+0xf9/0x10f [ 1636.400327] [] ? ktime_get_ts+0xcd/0xd5 [ 1636.400327] [] ? sys_select+0x6e/0x8f [ 1636.400327] [] ? sysenter_do_call+0x12/0x28 [ 1636.907386] saa7146 (0) vpeirq: used 1 times >80% of buffer (1208464 bytes now) [ 1666.883364] saa7146 (0) vpeirq: used 1 times >80% of buffer (46812 bytes now)