[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.32.26 (root@localhost.localdomain) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #2 SMP Fri Jul 15 12:54:26 MYT 2011
[    0.000000] Command line: ro root=UUID=e0e6b02e-9959-4ef5-9a88-6fa3a94be3c0 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us nomodeset rhgb quiet  nomodeset single
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] xen_release_chunk: looking at area pfn db000-db800: 2048 pages freed
[    0.000000] xen_release_chunk: looking at area pfn dfa00-ed09f: 54943 pages freed
[    0.000000] released 56991 pages of unused memory
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009a800 (usable)
[    0.000000]  Xen: 000000000009a800 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  Xen: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  Xen: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  Xen: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  Xen: 0000000040200000 - 00000000da50c000 (usable)
[    0.000000]  Xen: 00000000da50c000 - 00000000da54f000 (ACPI NVS)
[    0.000000]  Xen: 00000000da54f000 - 00000000da7c8000 (usable)
[    0.000000]  Xen: 00000000da7c8000 - 00000000da967000 (reserved)
[    0.000000]  Xen: 00000000da967000 - 00000000dacd5000 (usable)
[    0.000000]  Xen: 00000000dacd5000 - 00000000dad68000 (reserved)
[    0.000000]  Xen: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[    0.000000]  Xen: 00000000dafe8000 - 00000000db000000 (ACPI data)
[    0.000000]  Xen: 00000000db800000 - 00000000dfa00000 (reserved)
[    0.000000]  Xen: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  Xen: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  Xen: 0000000100000000 - 000000012c49f000 (usable)
[    0.000000] DMI 2.7 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x12c49f max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[    0.000000] last_pfn = 0xdacd5 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 04fff000
[    0.000000] init_memory_mapping: 0000000000000000-00000000dacd5000
[    0.000000]  0000000000 - 00dacd5000 page 4k
[    0.000000] kernel direct mapping tables up to dacd5000 @ 100000-7dc000
[    0.000000] init_memory_mapping: 0000000100000000-000000012c49f000
[    0.000000]  0100000000 - 012c49f000 page 4k
[    0.000000] kernel direct mapping tables up to 12c49f000 @ 442e000-4d97000
[    0.000000] RAMDISK: 01b60000 - 03c9c600
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000daff3078 0006C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000daffd388 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000daff3170 0A218 (v02 ALASKA    A M I 00000094 INTL 20051117)
[    0.000000] ACPI: FACS 00000000dafdff80 00040
[    0.000000] ACPI: APIC 00000000daffd480 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000daffd4f8 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000daffd538 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: ASF! 00000000daffd570 000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
[    0.000000] ACPI: SSDT 00000000daffd618 0094E (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000daffdf68 00996 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: ECDT 00000000daffe900 000C1 (v01 ALASKA    A M I 01072009 AMI. 00000004)
[    0.000000] ACPI: XMAR 00000000daffe9c8 000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000012c49f000
[    0.000000] Bootmem setup node 0 0000000000000000-000000012c49f000
[    0.000000]   NODE_DATA [0000000000010000 - 0000000000025fff]
[    0.000000]   bootmap [0000000000026000 -  000000000004b897] pages 26
[    0.000000] (10 early reservations) ==> bootmem [0000000000 - 012c49f000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0004407000 - 000442e000]   XEN PAGETABLES ==> [0004407000 - 000442e000]
[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #3 [0001000000 - 0001a35978]    TEXT DATA BSS ==> [0001000000 - 0001a35978]
[    0.000000]   #4 [0001b60000 - 0003c9c600]          RAMDISK ==> [0001b60000 - 0003c9c600]
[    0.000000]   #5 [0003c9d000 - 0004407000]   XEN START INFO ==> [0003c9d000 - 0004407000]
[    0.000000]   #6 [0100000000 - 012c49f000]        XEN EXTRA ==> [0100000000 - 012c49f000]
[    0.000000]   #7 [0001a36000 - 0001a482ae]              BRK ==> [0001a36000 - 0001a482ae]
[    0.000000]   #8 [0000100000 - 00007b2000]          PGTABLE ==> [0000100000 - 00007b2000]
[    0.000000]   #9 [000442e000 - 0004592000]          PGTABLE ==> [000442e000 - 0004592000]
[    0.000000] found SMP MP-table at [ffff8800000fcdf0] fcdf0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0012c49f
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[7] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000da50c
[    0.000000]     0: 0x000da54f -> 0x000da7c8
[    0.000000]     0: 0x000da967 -> 0x000dacd5
[    0.000000]     0: 0x00100000 -> 0x0012c49f
[    0.000000] On node 0 totalpages: 1075996
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1717 pages reserved
[    0.000000]   DMA zone: 2205 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 876331 pages, LIFO batch:31
[    0.000000]   Normal zone: 2481 pages used for memmap
[    0.000000]   Normal zone: 178926 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 256
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000da50c000 - 00000000da54f000
[    0.000000] PM: Registered nosave memory: 00000000da7c8000 - 00000000da967000
[    0.000000] PM: Registered nosave memory: 00000000dacd5000 - 00000000dad68000
[    0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[    0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[    0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.1.0 (preserve-AD) (dom0)
[    0.000000] NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000806b000 s90264 r8192 d24424 u122880
[    0.000000] pcpu-alloc: s90264 r8192 d24424 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    1.444441] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1057462
[    1.444444] Policy zone: Normal
[    1.444448] Kernel command line: ro root=UUID=e0e6b02e-9959-4ef5-9a88-6fa3a94be3c0 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us nomodeset rhgb quiet  nomodeset single
[    1.444578] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    1.444941] Initializing CPU#0
[    1.452273] DMA: Placing 64MB software IO TLB between ffff8800080ec000 - ffff88000c0ec000
[    1.452279] DMA: software IO TLB at phys 0x80ec000 - 0xc0ec000
[    1.452282] xen_swiotlb_fixup: buf=ffff8800080ec000 size=67108864
[    1.472663] xen_swiotlb_fixup: buf=ffff88000c14c000 size=32768
[    1.491475] Memory: 3389804k/4919932k available (4574k kernel code, 615948k absent, 914180k reserved, 3684k data, 932k init)
[    1.491513] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    1.491529] Hierarchical RCU implementation.
[    1.491535] NR_IRQS:4352 nr_irqs:1280
[    1.491639] xen: --> irq=0
[    1.491647] xen: --> irq=1
[    1.491652] xen: --> irq=2
[    1.491656] xen: --> irq=3
[    1.491661] xen: --> irq=4
[    1.491666] xen: --> irq=5
[    1.491671] xen: --> irq=6
[    1.491675] xen: --> irq=7
[    1.491680] xen: --> irq=8
[    1.491685] xen: --> irq=9
[    1.491690] xen: --> irq=10
[    1.491694] xen: --> irq=11
[    1.491699] xen: --> irq=12
[    1.491704] xen: --> irq=13
[    1.491709] xen: --> irq=14
[    1.491714] xen: --> irq=15
[    1.491728] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    1.491732] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    1.491735] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[    1.491738] xen: registering gsi 9 triggering 0 polarity 0
[    1.491740] xen_allocate_pirq: returning irq 9 for gsi 9
[    1.491742] xen: --> irq=9
[    1.491750] xen: acpi sci 9
[    1.494267] Console: colour VGA+ 80x25
[    1.494344] console [tty0] enabled
[    1.504180] allocated 44564480 bytes of page_cgroup
[    1.504184] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    1.504221] Xen: using vcpuop timer interface
[    1.504225] installing Xen timer for CPU 0
[    1.504236]   alloc irq_desc for 1279 on node -1
[    1.504239]   alloc kstat_irqs on node -1
[    1.504261] Detected 2195.084 MHz processor.
[    1.504269] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.16 BogoMIPS (lpj=2195084)
[    1.504300] Security Framework initialized
[    1.504306] SELinux:  Initializing.
[    1.504315] SELinux:  Starting in permissive mode
[    1.505866] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    1.508418] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    1.509317] Mount-cache hash table entries: 256
[    1.509476] Initializing cgroup subsys ns
[    1.509481] Initializing cgroup subsys cpuacct
[    1.509486] Initializing cgroup subsys memory
[    1.509506] Initializing cgroup subsys devices
[    1.509509] Initializing cgroup subsys freezer
[    1.509511] Initializing cgroup subsys net_cls
[    1.509573] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.509576] CPU: L2 cache: 256K
[    1.509578] CPU: L3 cache: 4096K
[    1.509583] CPU 0/0x0 -> Node 0
[    1.509586] CPU: Unsupported number of siblings 16
[    1.509591] mce: CPU supports 7 MCE banks
[    1.509615] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[    1.509632] SMP alternatives: switching to UP code
[    1.527968] ACPI: Core revision 20090903
[    1.547107] ftrace: converting mcount calls to 0f 1f 44 00 00
[    1.547112] ftrace: allocating 26536 entries in 105 pages
[    1.557542]   alloc irq_desc for 1278 on node -1
[    1.557545]   alloc kstat_irqs on node -1
[    1.557552]   alloc irq_desc for 1277 on node -1
[    1.557554]   alloc kstat_irqs on node -1
[    1.557559]   alloc irq_desc for 1276 on node -1
[    1.557561]   alloc kstat_irqs on node -1
[    1.557566]   alloc irq_desc for 1275 on node -1
[    1.557568]   alloc kstat_irqs on node -1
[    1.557794] installing Xen timer for CPU 1
[    1.557797]   alloc irq_desc for 1274 on node -1
[    1.557799]   alloc kstat_irqs on node -1
[    1.557826] SMP alternatives: switching to SMP code
[    1.575061]   alloc irq_desc for 1273 on node -1
[    1.575063]   alloc kstat_irqs on node -1
[    1.575076]   alloc irq_desc for 1272 on node -1
[    1.575078]   alloc kstat_irqs on node -1
[    1.575083]   alloc irq_desc for 1271 on node -1
[    1.575085]   alloc kstat_irqs on node -1
[    1.575090]   alloc irq_desc for 1270 on node -1
[    1.575092]   alloc kstat_irqs on node -1
[    1.575106] Initializing CPU#1
[    1.575161] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.575165] CPU: L2 cache: 256K
[    1.575167] CPU: L3 cache: 4096K
[    1.575173] CPU 1/0x0 -> Node 0
[    1.575176] CPU: Unsupported number of siblings 16
[    1.575309] installing Xen timer for CPU 2
[    1.575313]   alloc irq_desc for 1269 on node -1
[    1.575315]   alloc kstat_irqs on node -1
[    1.575339]   alloc irq_desc for 1268 on node -1
[    1.575341]   alloc kstat_irqs on node -1
[    1.575346]   alloc irq_desc for 1267 on node -1
[    1.575348]   alloc kstat_irqs on node -1
[    1.575353]   alloc irq_desc for 1266 on node -1
[    1.575355]   alloc kstat_irqs on node -1
[    1.575360]   alloc irq_desc for 1265 on node -1
[    1.575362]   alloc kstat_irqs on node -1
[    1.575372] Initializing CPU#2
[    1.575414] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.575417] CPU: L2 cache: 256K
[    1.575418] CPU: L3 cache: 4096K
[    1.575422] CPU 2/0x0 -> Node 0
[    1.575425] CPU: Unsupported number of siblings 16
[    1.575526] installing Xen timer for CPU 3
[    1.575530]   alloc irq_desc for 1264 on node -1
[    1.575532]   alloc kstat_irqs on node -1
[    1.575551]   alloc irq_desc for 1263 on node -1
[    1.575553]   alloc kstat_irqs on node -1
[    1.575558]   alloc irq_desc for 1262 on node -1
[    1.575560]   alloc kstat_irqs on node -1
[    1.575565]   alloc irq_desc for 1261 on node -1
[    1.575567]   alloc kstat_irqs on node -1
[    1.575572]   alloc irq_desc for 1260 on node -1
[    1.575574]   alloc kstat_irqs on node -1
[    1.575583] Initializing CPU#3
[    1.575619] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.575621] CPU: L2 cache: 256K
[    1.575623] CPU: L3 cache: 4096K
[    1.575627] CPU 3/0x0 -> Node 0
[    1.575629] CPU: Unsupported number of siblings 16
[    1.575664] Brought up 4 CPUs
[    1.575687] CPU0 attaching sched-domain:
[    1.575690]  domain 0: span 0-3 level CPU
[    1.575693]   groups: 0 1 2 3
[    1.575701] CPU1 attaching sched-domain:
[    1.575704]  domain 0: span 0-3 level CPU
[    1.575706]   groups: 1 2 3 0
[    1.575714] CPU2 attaching sched-domain:
[    1.575716]  domain 0: span 0-3 level CPU
[    1.575718]   groups: 2 3 0 1
[    1.575725] CPU3 attaching sched-domain:
[    1.575727]  domain 0: span 0-3 level CPU
[    1.575730]   groups: 3 0 1 2
[    1.575973] devtmpfs: initialized
[    1.581266] Grant table initialized
[    1.581311] Time: 11:19:57  Date: 07/18/11
[    1.581355] NET: Registered protocol family 16
[    1.581433]   alloc irq_desc for 1259 on node -1
[    1.581436]   alloc kstat_irqs on node -1
[    1.582548] ACPI: bus type pci registered
[    1.582568] sync cpu 0 get result 1 max_id 3
[    1.582578] sync cpu 1 get result 1 max_id 3
[    1.582587] sync cpu 2 get result 1 max_id 3
[    1.582596] sync cpu 3 get result 1 max_id 3
[    1.582599]   alloc irq_desc for 1258 on node -1
[    1.582601]   alloc kstat_irqs on node -1
[    1.582698] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    1.582702] PCI: MCFG area at f8000000 reserved in E820
[    1.590144] PCI: Using MMCONFIG at f8000000 - fbffffff
[    1.590147] PCI: Using configuration type 1 for base access
[    1.591611] bio: create slab <bio-0> at 0
[    1.592920] ERROR: Unable to locate IOAPIC for GSI 9
[    1.593040] ACPI: EC: EC description table is found, configuring boot EC
[    1.614397] ACPI: Executed 1 blocks of module-level executable AML code
[    1.622361] ACPI: BIOS _OSI(Linux) query ignored
[    1.628352] ACPI: Interpreter enabled
[    1.628356] ACPI: (supports S0 S1 S3 S4 S5)
[    1.628402] ACPI: Using IOAPIC for interrupt routing
[    1.645280] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.645380] ACPI: Power Resource [FN00] (off)
[    1.645442] ACPI: Power Resource [FN01] (off)
[    1.645501] ACPI: Power Resource [FN02] (off)
[    1.645560] ACPI: Power Resource [FN03] (off)
[    1.645619] ACPI: Power Resource [FN04] (off)
[    1.647175] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    1.649088] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    1.649297] pci 0000:00:02.0: reg 10 64bit mmio: [0xf7800000-0xf7bfffff]
[    1.649312] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[    1.649321] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
[    1.649528] pci 0000:00:16.0: reg 10 64bit mmio: [0xf7d2c000-0xf7d2c00f]
[    1.649640] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.649648] pci 0000:00:16.0: PME# disabled
[    1.649748] pci 0000:00:16.3: reg 10 io port: [0xf0e0-0xf0e7]
[    1.649762] pci 0000:00:16.3: reg 14 32bit mmio: [0xf7d2a000-0xf7d2afff]
[    1.649992] pci 0000:00:19.0: reg 10 32bit mmio: [0xf7d00000-0xf7d1ffff]
[    1.650005] pci 0000:00:19.0: reg 14 32bit mmio: [0xf7d29000-0xf7d29fff]
[    1.650018] pci 0000:00:19.0: reg 18 io port: [0xf080-0xf09f]
[    1.650125] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.650132] pci 0000:00:19.0: PME# disabled
[    1.650251] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7d28000-0xf7d283ff]
[    1.650381] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.650388] pci 0000:00:1a.0: PME# disabled
[    1.650492] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7d20000-0xf7d23fff]
[    1.650607] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.650614] pci 0000:00:1b.0: PME# disabled
[    1.650793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.650801] pci 0000:00:1c.0: PME# disabled
[    1.650980] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.650988] pci 0000:00:1c.1: PME# disabled
[    1.651142] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7d27000-0xf7d273ff]
[    1.651274] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.651282] pci 0000:00:1d.0: PME# disabled
[    1.651613] pci 0000:00:1f.2: reg 10 io port: [0xf0d0-0xf0d7]
[    1.651626] pci 0000:00:1f.2: reg 14 io port: [0xf0c0-0xf0c3]
[    1.651640] pci 0000:00:1f.2: reg 18 io port: [0xf0b0-0xf0b7]
[    1.651653] pci 0000:00:1f.2: reg 1c io port: [0xf0a0-0xf0a3]
[    1.651667] pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f]
[    1.651681] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7d26000-0xf7d267ff]
[    1.651773] pci 0000:00:1f.2: PME# supported from D3hot
[    1.651781] pci 0000:00:1f.2: PME# disabled
[    1.651858] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7d25000-0xf7d250ff]
[    1.651894] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
[    1.652832] pci 0000:02:00.0: reg 10 64bit mmio: [0xf7c00000-0xf7c01fff]
[    1.653879] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.653932] pci 0000:02:00.0: PME# disabled
[    1.656749] pci 0000:00:1c.1: bridge 32bit mmio: [0xf7c00000-0xf7cfffff]
[    1.656796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.657265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.657411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.673975] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.674180] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[    1.674373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.674564] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.674764] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.674957] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.675147] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.675348] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.675456] xen_balloon: Initialising balloon driver with page order 0.
[    1.675475] last_pfn = 0x12c49f max_arch_pfn = 0x400000000
[    1.677740] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.677753] vgaarb: loaded
[    1.677879] SCSI subsystem initialized
[    1.678082] libata version 3.00 loaded.
[    1.678192] usbcore: registered new interface driver usbfs
[    1.678214] usbcore: registered new interface driver hub
[    1.678254] usbcore: registered new device driver usb
[    1.678344] PCI: Using ACPI for IRQ routing
[    1.678601] NetLabel: Initializing
[    1.678603] NetLabel:  domain hash size = 128
[    1.678605] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.678623] NetLabel:  unlabeled traffic allowed by default
[    1.678712] Switching to clocksource xen
[    1.691274] pnp: PnP ACPI init
[    1.691295] ACPI: bus type pnp registered
[    1.692512] xen: registering gsi 8 triggering 1 polarity 0
[    1.692516] xen_allocate_pirq: returning irq 8 for gsi 8
[    1.692518] xen: --> irq=8
[    1.693114] xen: registering gsi 13 triggering 1 polarity 0
[    1.693117] xen_allocate_pirq: returning irq 13 for gsi 13
[    1.693119] xen: --> irq=13
[    1.693225] xen: registering gsi 1 triggering 1 polarity 0
[    1.693228] xen_allocate_pirq: returning irq 1 for gsi 1
[    1.693230] xen: --> irq=1
[    1.695326] pnp: PnP ACPI: found 14 devices
[    1.695328] ACPI: ACPI bus type pnp unregistered
[    1.695349] system 00:04: ioport range 0x680-0x69f has been reserved
[    1.695353] system 00:04: ioport range 0x1000-0x100f has been reserved
[    1.695356] system 00:04: ioport range 0x1100-0x110f has been reserved
[    1.695359] system 00:04: ioport range 0xffff-0xffff has been reserved
[    1.695362] system 00:04: ioport range 0x400-0x453 has been reserved
[    1.695365] system 00:04: ioport range 0x458-0x47f has been reserved
[    1.695368] system 00:04: ioport range 0x500-0x57f has been reserved
[    1.695372] system 00:04: ioport range 0x164e-0x164f has been reserved
[    1.695378] system 00:06: ioport range 0x454-0x457 has been reserved
[    1.695384] system 00:07: ioport range 0x680-0x68f has been reserved
[    1.695387] system 00:07: ioport range 0xa10-0xa1f has been reserved
[    1.695394] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    1.695400] system 00:0b: ioport range 0x6a4-0x6a4 has been reserved
[    1.695403] system 00:0b: ioport range 0x6a0-0x6a0 has been reserved
[    1.695410] system 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    1.695414] system 00:0c: iomem range 0xfed10000-0xfed17fff has been reserved
[    1.695417] system 00:0c: iomem range 0xfed18000-0xfed18fff has been reserved
[    1.695420] system 00:0c: iomem range 0xfed19000-0xfed19fff has been reserved
[    1.695423] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[    1.695427] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[    1.695430] system 00:0c: iomem range 0xfed90000-0xfed93fff has been reserved
[    1.695433] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[    1.695436] system 00:0c: iomem range 0xff000000-0xffffffff has been reserved
[    1.695440] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
[    1.695443] system 00:0c: iomem range 0xdfa00000-0xdfa00fff has been reserved
[    1.695449] system 00:0d: iomem range 0x20000000-0x201fffff has been reserved
[    1.695453] system 00:0d: iomem range 0x40000000-0x401fffff has been reserved
[    1.700604] PM-Timer failed consistency check  (0x0xffffff) - aborting.
[    1.700661] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    1.700663] pci 0000:00:1c.0:   IO window: disabled
[    1.700675] pci 0000:00:1c.0:   MEM window: disabled
[    1.700682] pci 0000:00:1c.0:   PREFETCH window: disabled
[    1.700698] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    1.700700] pci 0000:00:1c.1:   IO window: disabled
[    1.700711] pci 0000:00:1c.1:   MEM window: 0xf7c00000-0xf7cfffff
[    1.700719] pci 0000:00:1c.1:   PREFETCH window: disabled
[    1.700748] xen: registering gsi 16 triggering 0 polarity 1
[    1.700756]   alloc irq_desc for 16 on node 0
[    1.700758]   alloc kstat_irqs on node 0
[    1.700763] xen: --> irq=16
[    1.700768] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.700778] pci 0000:00:1c.0: setting latency timer to 64
[    1.700797] xen: registering gsi 17 triggering 0 polarity 1
[    1.700802]   alloc irq_desc for 17 on node 0
[    1.700804]   alloc kstat_irqs on node 0
[    1.700806] xen: --> irq=17
[    1.700810] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.700819] pci 0000:00:1c.1: setting latency timer to 64
[    1.700825] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.700828] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    1.700831] pci_bus 0000:02: resource 1 mem: [0xf7c00000-0xf7cfffff]
[    1.700852] NET: Registered protocol family 2
[    1.701260] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.702966] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.704861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.705090] TCP: Hash tables configured (established 524288 bind 65536)
[    1.705093] TCP reno registered
[    1.705184] NET: Registered protocol family 1
[    1.705204] pci 0000:00:02.0: Boot video device
[    2.041209] Trying to unpack rootfs image as initramfs...
[    2.067547] Freeing initrd memory: 34033k freed
[    2.076166] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.076172] DMA: Placing 64MB software IO TLB between ffff8800080ec000 - ffff88000c0ec000
[    2.076174] DMA: software IO TLB at phys 0x80ec000 - 0xc0ec000
[    2.076972] audit: initializing netlink socket (disabled)
[    2.076986] type=2000 audit(1310987998.018:1): initialized
[    2.085787] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.087560] VFS: Disk quotas dquot_6.5.2
[    2.087602] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.088127] msgmni has been set to 6687
[    2.088188] SELinux:  Registering netfilter hooks
[    2.088712] alg: No test for stdrng (krng)
[    2.088772] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.088775] io scheduler noop registered
[    2.088777] io scheduler anticipatory registered
[    2.088780] io scheduler deadline registered
[    2.088820] io scheduler cfq registered (default)
[    2.089124]   alloc irq_desc for 1257 on node -1
[    2.089126]   alloc kstat_irqs on node -1
[    2.089186] pcieport 0000:00:1c.0: setting latency timer to 64
[    2.089462]   alloc irq_desc for 1256 on node -1
[    2.089465]   alloc kstat_irqs on node -1
[    2.089516] pcieport 0000:00:1c.1: setting latency timer to 64
[    2.089661] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.089689] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.089691] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    2.090107] acpiphp: Slot [1] registered
[    2.090390] pci-stub: invalid id string ""
[    2.090574] ACPI: AC Adapter [ADP1] (on-line)
[    2.090669] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.090679] ACPI: Power Button [PWRB]
[    2.090732] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.092433] ACPI: Lid Switch [LID0]
[    2.092488] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.092490] ACPI: Power Button [PWRF]
[    2.092649] fan PNP0C0B:00: registered as cooling_device0
[    2.092656] ACPI: Fan [FAN0] (off)
[    2.092771] fan PNP0C0B:01: registered as cooling_device1
[    2.092777] ACPI: Fan [FAN1] (off)
[    2.092891] fan PNP0C0B:02: registered as cooling_device2
[    2.092897] ACPI: Fan [FAN2] (off)
[    2.093022] fan PNP0C0B:03: registered as cooling_device3
[    2.093028] ACPI: Fan [FAN3] (off)
[    2.093143] fan PNP0C0B:04: registered as cooling_device4
[    2.093149] ACPI: Fan [FAN4] (off)
[    2.094522] ACPI: SSDT 00000000dad41718 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    2.096548] ACPI: CPU-1 (power states: C1[C1] C2[C3])
[    2.097230] ACPI: SSDT 00000000dad42a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    2.097831] ACPI: SSDT 00000000dad40d98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    2.099629] ACPI: CPU-1 (power states: C1[C1] C2[C3])
[    2.101226] ACPI: CPU-1 (power states: C1[C1] C2[C3])
[    2.102802] ACPI: CPU-1 (power states: C1[C1] C2[C3])
[    2.150572] thermal LNXTHERM:01: registered as thermal_zone0
[    2.150603] ACPI: Thermal Zone [TZ00] (72 C)
[    2.159620] thermal LNXTHERM:02: registered as thermal_zone1
[    2.159648] ACPI: Thermal Zone [TZ01] (0 C)
[    2.159802] Event-channel device installed.
[    2.166290] blktap_device_init: blktap device major 253
[    2.166303] blktap_ring_init: blktap ring major: 251
[    2.175505] registering netback
[    2.176525]   alloc irq_desc for 1255 on node -1
[    2.176533]   alloc kstat_irqs on node -1
[    2.180352]   alloc irq_desc for 1254 on node -1
[    2.180359]   alloc kstat_irqs on node -1
[    2.181757] hpet_acpi_add: no address or irqs in _CRS
[    2.181901] Non-volatile memory driver v1.3
[    2.181908] Linux agpgart interface v0.103
[    2.182091] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.182914] xen: registering gsi 19 triggering 0 polarity 1
[    2.182932]   alloc irq_desc for 19 on node 0
[    2.182941]   alloc kstat_irqs on node 0
[    2.182971] xen: --> irq=19
[    2.182994] serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.183282] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19) is a 16550A
[    2.186321] brd: module loaded
[    2.187788] loop: module loaded
[    2.187898] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    2.188134] ahci 0000:00:1f.2: version 3.0
[    2.188179] xen: registering gsi 19 triggering 0 polarity 1
[    2.188186] xen_allocate_pirq: returning irq 19 for gsi 19
[    2.188192] xen: --> irq=19
[    2.188199] Already setup the GSI :19
[    2.188207] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.188339]   alloc irq_desc for 1253 on node -1
[    2.188346]   alloc kstat_irqs on node -1
[    2.188522] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    2.188533] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    2.188552] ahci 0000:00:1f.2: setting latency timer to 64
[    2.189122] scsi0 : ahci
[    2.189548] scsi1 : ahci
[    2.189807] scsi2 : ahci
[    2.190042] scsi3 : ahci
[    2.190370] scsi4 : ahci
[    2.190635] scsi5 : ahci
[    2.191754] ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 1253
[    2.191762] ata2: DUMMY
[    2.191766] ata3: DUMMY
[    2.191770] ata4: DUMMY
[    2.191774] ata5: DUMMY
[    2.191779] ata6: DUMMY
[    2.192098] Fixed MDIO Bus: probed
[    2.192397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.192459] xen: registering gsi 16 triggering 0 polarity 1
[    2.192467] xen_allocate_pirq: returning irq 16 for gsi 16
[    2.192473] xen: --> irq=16
[    2.192482] Already setup the GSI :16
[    2.192490] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.192540] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.192552] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.192702] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.192824] ehci_hcd 0000:00:1a.0: debug port 2
[    2.196735] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    2.196788] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d28000
[    2.206046] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.206117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.206120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.206122] usb usb1: Product: EHCI Host Controller
[    2.206123] usb usb1: Manufacturer: Linux 2.6.32.26 ehci_hcd
[    2.206125] usb usb1: SerialNumber: 0000:00:1a.0
[    2.206188] usb usb1: configuration #1 chosen from 1 choice
[    2.206216] hub 1-0:1.0: USB hub found
[    2.206260] hub 1-0:1.0: 3 ports detected
[    2.206327] xen: registering gsi 23 triggering 0 polarity 1
[    2.206332]   alloc irq_desc for 23 on node 0
[    2.206333]   alloc kstat_irqs on node 0
[    2.206336] xen: --> irq=23
[    2.206341] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.206358] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.206362] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.206398] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.206439] ehci_hcd 0000:00:1d.0: debug port 2
[    2.210329] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    2.210347] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d27000
[    2.220026] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.220090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.220102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.220105] usb usb2: Product: EHCI Host Controller
[    2.220108] usb usb2: Manufacturer: Linux 2.6.32.26 ehci_hcd
[    2.220111] usb usb2: SerialNumber: 0000:00:1d.0
[    2.220200] usb usb2: configuration #1 chosen from 1 choice
[    2.220236] hub 2-0:1.0: USB hub found
[    2.220283] hub 2-0:1.0: 3 ports detected
[    2.220356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.220372] uhci_hcd: USB Universal Host Controller Interface driver
[    2.220447] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.220450] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.220834] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.220956] mice: PS/2 mouse device common for all mice
[    2.221366] rtc_cmos 00:05: RTC can wake from S4
[    2.221434] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.221484] rtc0: alarms up to one month, y3k, 242 bytes nvram
[    2.221499] wdt: Xen WatchDog Timer Driver v0.01
[    2.221562] wdt: initialized (timeout=60s, nowayout=0)
[    2.221711] device-mapper: uevent: version 1.0.3
[    2.221988] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.222107] cpuidle: using governor ladder
[    2.222110] cpuidle: using governor menu
[    2.222671] usbcore: registered new interface driver hiddev
[    2.222689] usbcore: registered new interface driver usbhid
[    2.222693] usbhid: v2.6:USB HID core driver
[    2.222720] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.222859] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    2.222862] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    2.222865] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    2.222957] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.222970] TCP cubic registered
[    2.222972] Initializing XFRM netlink socket
[    2.222984] NET: Registered protocol family 17
[    2.223105] PM: Resume from disk failed.
[    2.223120] registered taskstats version 1
[    2.223161] No TPM chip found, activating TPM-bypass!
[    2.224017]   Magic number: 3:794:327
[    2.224156] rtc_cmos 00:05: setting system clock to 2011-07-18 11:19:58 UTC (1310987998)
[    2.224245] Initalizing network drop monitor service
[    2.252396] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.508055] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.622824] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.622835] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.623054] usb 1-1: configuration #1 chosen from 1 choice
[    2.623410] hub 1-1:1.0: USB hub found
[    2.623695] hub 1-1:1.0: 6 ports detected
[    2.725988] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.840818] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.840829] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.841055] usb 2-1: configuration #1 chosen from 1 choice
[    2.841407] hub 2-1:1.0: USB hub found
[    2.841683] hub 2-1:1.0: 8 ports detected
[    2.916325] usb 1-1.5: new full speed USB device using ehci_hcd and address 3
[    3.003344] usb 1-1.5: New USB device found, idVendor=0403, idProduct=6010
[    3.003356] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.003363] usb 1-1.5: Product: Dual RS232
[    3.003369] usb 1-1.5: Manufacturer: FTDI
[    3.003565] usb 1-1.5: configuration #1 chosen from 1 choice
[    3.117370] usb 2-1.3: new low speed USB device using ehci_hcd and address 3
[    3.207585] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c05a
[    3.207596] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.207604] usb 2-1.3: Product: USB Optical Mouse
[    3.207610] usb 2-1.3: Manufacturer: Logitech
[    3.207796] usb 2-1.3: configuration #1 chosen from 1 choice
[    3.211157] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[    3.211397] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[    3.284341] usb 2-1.4: new low speed USB device using ehci_hcd and address 4
[    3.377227] usb 2-1.4: New USB device found, idVendor=413c, idProduct=2106
[    3.377238] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.377245] usb 2-1.4: Product: Dell QuietKey Keyboard
[    3.377251] usb 2-1.4: Manufacturer: DELL
[    3.377429] usb 2-1.4: configuration #1 chosen from 1 choice
[    3.381289] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input6
[    3.381548] generic-usb 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.4/input0
[    3.444358] usb 2-1.6: new full speed USB device using ehci_hcd and address 5
[    3.523232] usb 2-1.6: New USB device found, idVendor=18e8, idProduct=6252
[    3.523243] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.523250] usb 2-1.6: Product: Broadcom Bluetooth USB
[    3.523256] usb 2-1.6: Manufacturer: Broadcom Corp
[    3.523442] usb 2-1.6: configuration #1 chosen from 1 choice
[    8.015044] ata1: link is slow to respond, please be patient (ready=0)
[   12.197051] ata1: COMRESET failed (errno=-16)
[   12.920054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.920465] ata1.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HD, max UDMA/133
[   12.920476] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   12.921004] ata1.00: configured for UDMA/133
[   12.932420] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
[   12.932947] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.933292] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[   12.933562] sd 0:0:0:0: [sda] Write Protect is off
[   12.933571] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.933662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.934235]  sda: sda1 sda2 sda3
[   12.936146] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.936605] Freeing unused kernel memory: 932k freed
[   12.937006] Write protecting the kernel read-only data: 6804k
[   13.019929] dracut: rd_NO_LUKS: removing cryptoluks activation
[   13.045021] udev[114]: starting version 161
[   13.147398] dracut: Starting plymouth daemon
[   13.475504] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[   13.475519] EXT4-fs (sda3): write access will be enabled during recovery
[   14.115364] EXT4-fs (sda3): orphan cleanup on readonly fs
[   14.116506] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 8786605
[   14.116933] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 8786604
[   14.117274] EXT4-fs (sda3): 2 orphan inodes deleted
[   14.117286] EXT4-fs (sda3): recovery complete
[   14.119086] EXT4-fs (sda3): mounted filesystem with ordered data mode
[   14.135710] dracut: Mounted root filesystem /dev/sda3
[   14.175782] dracut: Loading SELinux policy
[   14.213944] SELinux:  Disabled at runtime.
[   14.214168] SELinux:  Unregistering netfilter hooks
[   14.252165] type=1404 audit(1310988010.527:2): selinux=0 auid=4294967295 ses=4294967295
[   14.258911] dracut: /sbin/load_policy: Can't load policy file /etc/selinux/targeted/policy/policy.15: No such file or directory
[   14.358442] dracut: Switching root
[   14.598702] udev[405]: starting version 161
[   14.741298] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI
[   14.741303] e1000e: Copyright(c) 1999 - 2010 Intel Corporation.
[   14.741359] xen: registering gsi 20 triggering 0 polarity 1
[   14.741371]   alloc irq_desc for 20 on node 0
[   14.741374]   alloc kstat_irqs on node 0
[   14.741381] xen: --> irq=20
[   14.741394] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   14.741412] e1000e 0000:00:19.0: setting latency timer to 64
[   14.790024] iTCO_vendor_support: vendor-support=0
[   14.796596]   alloc irq_desc for 1252 on node -1
[   14.796601]   alloc kstat_irqs on node -1
[   14.796814] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   14.798913] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   14.799063] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   14.799101] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[   14.799159] iTCO_wdt: No card detected
[   14.815375] usbcore: registered new interface driver usbserial
[   14.815402] USB Serial support registered for generic
[   14.815495] usbcore: registered new interface driver usbserial_generic
[   14.815500] usbserial: USB Serial Driver core
[   14.828049] USB Serial support registered for FTDI USB Serial Device
[   14.828101] ftdi_sio 1-1.5:1.0: FTDI USB Serial Device converter detected
[   14.828138] usb 1-1.5: Detected FT2232C
[   14.828140] usb 1-1.5: Number of endpoints 2
[   14.828143] usb 1-1.5: Endpoint 1 MaxPacketSize 64
[   14.828146] usb 1-1.5: Endpoint 2 MaxPacketSize 64
[   14.828148] usb 1-1.5: Setting MaxPacketSize 64
[   14.833394] usb 1-1.5: FTDI USB Serial Device converter now attached to ttyUSB0
[   14.833423] ftdi_sio 1-1.5:1.1: FTDI USB Serial Device converter detected
[   14.833465] usb 1-1.5: Detected FT2232C
[   14.833468] usb 1-1.5: Number of endpoints 2
[   14.833471] usb 1-1.5: Endpoint 1 MaxPacketSize 64
[   14.833474] usb 1-1.5: Endpoint 2 MaxPacketSize 64
[   14.833477] usb 1-1.5: Setting MaxPacketSize 64
[   14.835835] usb 1-1.5: FTDI USB Serial Device converter now attached to ttyUSB1
[   14.835906] usbcore: registered new interface driver ftdi_sio
[   14.835909] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[   14.936469] Bluetooth: Core ver 2.15
[   14.936546] NET: Registered protocol family 31
[   14.936549] Bluetooth: HCI device and connection manager initialized
[   14.936553] Bluetooth: HCI socket layer initialized
[   14.939159] platform microcode: firmware: requesting intel-ucode/06-2a-07
[   14.956762] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   14.956954] usbcore: registered new interface driver btusb
[   15.000120] platform microcode: firmware: requesting intel-ucode/06-2a-07
[   15.008427] platform microcode: firmware: requesting intel-ucode/06-2a-07
[   15.009505] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:03:e1:90:f5:e5
[   15.009510] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[   15.009571] e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: FFFFFF-0FF
[   15.009613] xen: registering gsi 18 triggering 0 polarity 1
[   15.009622]   alloc irq_desc for 18 on node 0
[   15.009628]   alloc kstat_irqs on node 0
[   15.009635] xen: --> irq=18
[   15.009648] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   15.009656] ACPI: I/O resource 0000:00:1f.3 [0xf040-0xf05f] conflicts with ACPI region SMBI [0xf040-0xf04f]
[   15.009710] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.015865] platform microcode: firmware: requesting intel-ucode/06-2a-07
[   15.033559] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   15.046511] xen: registering gsi 22 triggering 0 polarity 1
[   15.046524]   alloc irq_desc for 22 on node 0
[   15.046527]   alloc kstat_irqs on node 0
[   15.046533] xen: --> irq=22
[   15.046545] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.046959] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.642028] ALSA sound/pci/hda/hda_codec.c:3056: hda_codec: model 'auto' is selected
[   15.642036] ALSA sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   15.642040] ALSA sound/pci/hda/hda_codec.c:3885:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.642043] ALSA sound/pci/hda/hda_codec.c:3889:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.642046] ALSA sound/pci/hda/hda_codec.c:3890:    mono: mono_out=0x0
[   15.642049] ALSA sound/pci/hda/hda_codec.c:3901:    inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0
[   15.642859] ALSA sound/pci/hda/patch_realtek.c:1288: realtek: No valid SSID, checking pincfg 0x40020601 for NID 0x1d
[   15.642863] ALSA sound/pci/hda/patch_realtek.c:1304: realtek: Enabling init ASM_ID=0x0601 CODEC_ID=10ec0888
[   15.642925] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   15.647732] ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
[   15.647737] ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
[   15.648199] ALSA sound/pci/hda/hda_generic.c:1030: hda_generic: no PCM found
[   16.230925] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   16.879918] Adding 6111224k swap on /dev/sda2.  Priority:-1 extents:1 across:6111224k SS
