xm create ubuntu-mediacenter.cfg -c Using config file "./ubuntu-mediacenter.cfg". Started domain ubuntu-mediacenter (id=10) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-server (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 19:20:32 UTC 2011 (Ubuntu 2.6.38-11.48-server 2.6.38.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-server root=UUID=992cda33-09ce-4437-b110-fe153702b2d5 ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] Hypervisor detected: Xen HVM [ 0.000000] Xen version 4.1. [ 0.000000] Xen Platform PCI: unrecognised magic value [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000fbc90] fbc90 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] RAMDISK: 366e0000 - 37368000 [ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen) [ 0.000000] ACPI: XSDT 00000000fc0134b0 00034 (v01 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: FACP 00000000fc0132d0 000F4 (v04 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: DSDT 00000000fc003440 0FE05 (v02 Xen HVM 00000000 INTL 20100528) [ 0.000000] ACPI: FACS 00000000fc003400 00040 [ 0.000000] ACPI: APIC 00000000fc0133d0 000D8 (v02 Xen HVM 00000000 HVML 00000000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000040000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000040000000 [ 0.000000] NODE_DATA [000000003fffb000 - 000000003fffffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 15 CPUs, 13 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bc000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s84416 r8192 d22080 u131072 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258440 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-server root=UUID=992cda33-09ce-4437-b110-fe153702b2d5 ro console=ttyS0,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1005640k/1048576k available (6025k kernel code, 456k absent, 42480k reserved, 5023k data, 880k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1208 16 [ 0.000000] Xen HVM callback vector for event delivery is enabled [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 10485760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Detected 2310.666 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.020000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4621.33 BogoMIPS (lpj=23106660) [ 0.020000] pid_max: default: 32768 minimum: 301 [ 0.020000] Security Framework initialized [ 0.020024] AppArmor: AppArmor initialized [ 0.022347] Yama: becoming mindful. [ 0.024480] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.030284] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.034281] Mount-cache hash table entries: 256 [ 0.036969] Initializing cgroup subsys ns [ 0.039207] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.040006] Initializing cgroup subsys cpuacct [ 0.042499] Initializing cgroup subsys memory [ 0.044978] Initializing cgroup subsys devices [ 0.050003] Initializing cgroup subsys freezer [ 0.052545] Initializing cgroup subsys net_cls [ 0.055111] Initializing cgroup subsys blkio [ 0.057594] CPU: Physical Processor ID: 0 [ 0.060003] CPU: Processor Core ID: 0 [ 0.062061] mce: CPU supports 6 MCE banks [ 0.064378] using C1E aware idle routine [ 0.072639] ACPI: Core revision 20110112 [ 0.080164] ftrace: allocating 24622 entries in 97 pages [ 0.102054] Not enabling x2apic, Intr-remapping init failed. [ 0.105290] Setting APIC routing to physical flat [ 0.112512] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.218008] CPU0: AMD Athlon(tm) II X4 605e Processor stepping 02 [ 0.220764] installing Xen timer for CPU 0 [ 0.223050] Performance Events: Broken PMU hardware detected, using software events only. [ 0.228482] Booting Node 0, Processors #1 [ 0.020000] installing Xen timer for CPU 1 [ 0.380320] Brought up 2 CPUs [ 0.380323] Total of 2 processors activated (9269.62 BogoMIPS). [ 0.388257] devtmpfs: initialized [ 0.391075] print_constraints: dummy: [ 0.393091] Time: 9:30:15 Date: 09/06/11 [ 0.395446] NET: Registered protocol family 16 [ 0.395446] Trying to unpack rootfs image as initramfs... [ 0.395850] Extended Config Space enabled on 0 nodes [ 0.398913] ACPI: bus type pci registered [ 0.400403] PCI: Using configuration type 1 for base access [ 0.403609] PCI: Using configuration type 1 for extended access [ 0.410213] bio: create slab at 0 [ 0.416643] ACPI: Interpreter enabled [ 0.418934] ACPI: (supports S0 S3 S4 S5) [ 0.420962] ACPI: Using IOAPIC for interrupt routing [ 0.511295] ACPI: No dock devices found. [ 0.513582] HEST: Table not found. [ 0.515645] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.520096] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.523873] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.527673] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.530012] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.534165] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfbffffff] [ 0.544641] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, [ 0.544642] * this clock source is slow. Consider trying other clock sources [ 0.562020] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.742268] Freeing initrd memory: 12832k freed [ 0.748076] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.969338] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11) [ 0.971129] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.974855] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.978564] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11) [ 0.991196] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.995806] vgaarb: device added: PCI:0000:00:07.0,decodes=io+mem,owns=io+mem,locks=none [ 1.000010] vgaarb: loaded [ 1.001747] SCSI subsystem initialized [ 1.003913] usbcore: registered new interface driver usbfs [ 1.003913] usbcore: registered new interface driver hub [ 1.010049] usbcore: registered new device driver usb [ 1.012991] wmi: Mapper loaded [ 1.012991] PCI: Using ACPI for IRQ routing [ 1.015425] NetLabel: Initializing [ 1.020011] NetLabel: domain hash size = 128 [ 1.022474] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.025273] NetLabel: unlabeled traffic allowed by default [ 1.028463] Switching to clocksource xen [ 1.035574] AppArmor: AppArmor Filesystem Enabled [ 1.038398] pnp: PnP ACPI init [ 1.040023] Switched to NOHz mode on CPU #0 [ 1.042639] Switched to NOHz mode on CPU #1 [ 1.045090] ACPI: bus type pnp registered [ 1.047473] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.051644] system 00:02: [io 0x10c0-0x1141] has been reserved [ 1.054980] system 00:02: [io 0xb044-0xb047] has been reserved [ 1.058401] system 00:03: [io 0x08a0-0x08a3] has been reserved [ 1.061841] system 00:03: [io 0x0cc0-0x0ccf] has been reserved [ 1.065187] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.068822] xen map irq failed -22 [ 1.070854] xen map irq failed -22 [ 1.090595] pnp: PnP ACPI: found 12 devices [ 1.093006] ACPI: ACPI bus type pnp unregistered [ 1.101715] NET: Registered protocol family 2 [ 1.104389] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.108811] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 1.113696] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.117867] TCP: Hash tables configured (established 131072 bind 65536) [ 1.121623] TCP reno registered [ 1.123500] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.126844] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.130545] NET: Registered protocol family 1 [ 1.133052] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.136487] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.139804] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.144499] audit: initializing netlink socket (disabled) [ 1.147616] type=2000 audit(1315301417.187:1): initialized [ 1.163320] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.168812] VFS: Disk quotas dquot_6.5.2 [ 1.171348] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.175801] fuse init (API version 7.16) [ 1.178344] msgmni has been set to 1989 [ 1.181195] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.185614] io scheduler noop registered [ 1.187934] io scheduler deadline registered (default) [ 1.190898] io scheduler cfq registered [ 1.193147] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.196307] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.200146] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.204266] ACPI: Power Button [PWRF] [ 1.206363] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 [ 1.210499] ACPI: Sleep Button [SLPF] [ 1.233930] ERST: Table is not found! [ 1.236112] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.269075] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.623941] 00:0a: ttyS0 at I/O 0x3f8 (irq = -1) is a 16550A [ 1.630398] Linux agpgart interface v0.103 [ 1.633948] brd: module loaded [ 1.636375] loop: module loaded [ 1.638242] i2c-core: driver [adp5520] using legacy suspend method [ 1.641731] i2c-core: driver [adp5520] using legacy resume method [ 1.646207] scsi0 : ata_piix [ 1.648288] scsi1 : ata_piix [ 1.649986] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc200 irq 14 [ 1.653879] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc208 irq 15 [ 1.658092] Fixed MDIO Bus: probed [ 1.661650] PPP generic driver version 2.4.2 [ 1.664237] tun: Universal TUN/TAP device driver, 1.6 [ 1.667107] tun: (C) 1999-2004 Max Krasnyansky [ 1.670777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.674668] ehci_hcd 0000:00:05.0: PCI INT B -> GSI 37 (level, low) -> IRQ 37 [ 1.678868] ehci_hcd 0000:00:05.0: EHCI Host Controller [ 1.681917] ehci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 1 [ 1.686176] ehci_hcd 0000:00:05.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.691713] ehci_hcd 0000:00:05.0: irq 37, io mem 0xf204a000 [ 1.710125] ehci_hcd 0000:00:05.0: USB 2.0 started, EHCI 1.00 [ 1.713600] hub 1-0:1.0: USB hub found [ 1.715815] hub 1-0:1.0: 5 ports detected [ 1.718146] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.721931] ohci_hcd 0000:00:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 1.727387] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.731291] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 1.736771] ohci_hcd 0000:00:04.0: irq 32, io mem 0xf2049000 [ 1.804542] hub 2-0:1.0: USB hub found [ 1.811114] hub 2-0:1.0: 5 ports detected [ 1.819787] uhci_hcd: USB Universal Host Controller Interface driver [ 1.824567] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.830000] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100 [ 1.830003] ata1.00: 20971520 sectors, multi 16: LBA48 [ 1.832836] ata1.00: configured for MWDMA2 [ 1.832939] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5 [ 1.833082] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.833153] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB) [ 1.833194] sd 0:0:0:0: [sda] Write Protect is off [ 1.833213] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.835930] sda: sda1 sda2 < sda5 > [ 1.865559] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.869809] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.872720] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.875722] mousedev: PS/2 mouse device common for all mice [ 1.879875] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.885143] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.888975] rtc0: alarms up to one day, 114 bytes nvram [ 1.892237] device-mapper: uevent: version 1.0.3 [ 1.894962] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx [ 1.899975] device-mapper: multipath: version 1.2.0 loaded [ 1.903122] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.907097] cpuidle: using governor ladder [ 1.909440] cpuidle: using governor menu [ 1.911920] TCP cubic registered [ 1.913898] NET: Registered protocol family 10 [ 1.917002] NET: Registered protocol family 17 [ 1.919612] Registering the dns_resolver key type [ 1.922580] registered taskstats version 1 [ 1.926724] Magic number: 11:897:524 [ 1.928980] rtc_cmos 00:05: setting system clock to 2011-09-06 09:30:17 UTC (1315301417) [ 1.933558] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.936954] EDD information not available. [ 1.941296] Freeing unused kernel memory: 880k freed [ 1.944420] Write protecting the kernel read-only data: 10240k [ 1.948403] Freeing unused kernel memory: 100k freed [ 1.956146] Freeing unused kernel memory: 1416k freed [ 1.982153] <30>udev[68]: starting version 167 [ 2.026106] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.030192] xen map irq failed -22 [ 2.032214] 8139cp 0000:00:03.0: PCI INT A: failed to register GSI [ 2.035748] 8139cp: probe of 0000:00:03.0 failed with error -1 [ 2.054128] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.057279] 8139too 0000:00:03.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip, use 8139cp [ 2.091272] Initialising Xen virtual ethernet driver. [ 2.101295] Event-channel device installed. [ 2.106257] FDC 0 is a S82078B [ 2.350206] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 2.630564] input: ABBAHOME as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input3 [ 2.645108] generic-usb 0003:05D5:6782.0001: input,hidraw0: USB HID v1.10 Keyboard [ABBAHOME] on usb-0000:00:04.0-2/input0 [ 2.662113] usbcore: registered new interface driver usbhid [ 2.665292] usbhid: USB HID core driver [ 32.060751] ata1: lost interrupt (Status 0x58) [ 32.087015] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 32.091068] ata1.00: failed command: IDENTIFY DEVICE [ 32.093860] ata1.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [ 32.093862] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 32.102858] ata1.00: status: { DRDY } [ 32.105411] ata1: soft resetting link [ 32.264671] ata1.00: configured for MWDMA2 [ 32.267070] ata1: EH complete