xm create ubuntu-mediacenter.cfg -c Using config file "./ubuntu-mediacenter.cfg". Started domain ubuntu-mediacenter (id=9) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-server (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 19:20:32 UTC 2011 (Ubuntu 2.6.38-11.48-server 2.6.38.8) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-server root=UUID=992cda33-09ce-4437-b110-fe153702b2d5 ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] Hypervisor detected: Xen HVM [ 0.000000] Xen version 4.1. [ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs. [ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks. [ 0.000000] You might have to change the root device [ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d] [ 0.000000] in your root= kernel command line option [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000fbc90] fbc90 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] RAMDISK: 366e0000 - 37368000 [ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen) [ 0.000000] ACPI: XSDT 00000000fc0134b0 00034 (v01 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: FACP 00000000fc0132d0 000F4 (v04 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: DSDT 00000000fc003440 0FE05 (v02 Xen HVM 00000000 INTL 20100528) [ 0.000000] ACPI: FACS 00000000fc003400 00040 [ 0.000000] ACPI: APIC 00000000fc0133d0 000D8 (v02 Xen HVM 00000000 HVML 00000000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000040000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000040000000 [ 0.000000] NODE_DATA [000000003fffb000 - 000000003fffffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 15 CPUs, 13 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bc000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s84416 r8192 d22080 u131072 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258440 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-server root=UUID=992cda33-09ce-4437-b110-fe153702b2d5 ro console=ttyS0,115200n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1005640k/1048576k available (6025k kernel code, 456k absent, 42480k reserved, 5023k data, 880k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1208 16 [ 0.000000] Xen HVM callback vector for event delivery is enabled [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 10485760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Detected 2310.666 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.020000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4621.33 BogoMIPS (lpj=23106660) [ 0.020000] pid_max: default: 32768 minimum: 301 [ 0.020000] Security Framework initialized [ 0.020027] AppArmor: AppArmor initialized [ 0.022406] Yama: becoming mindful. [ 0.024587] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.028746] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.030151] Mount-cache hash table entries: 256 [ 0.032776] Initializing cgroup subsys ns [ 0.035050] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.040005] Initializing cgroup subsys cpuacct [ 0.042498] Initializing cgroup subsys memory [ 0.044892] Initializing cgroup subsys devices [ 0.050003] Initializing cgroup subsys freezer [ 0.052451] Initializing cgroup subsys net_cls [ 0.054866] Initializing cgroup subsys blkio [ 0.057345] CPU: Physical Processor ID: 0 [ 0.060003] CPU: Processor Core ID: 0 [ 0.062069] mce: CPU supports 6 MCE banks [ 0.064381] using C1E aware idle routine [ 0.071282] ACPI: Core revision 20110112 [ 0.078753] ftrace: allocating 24622 entries in 97 pages [ 0.102025] Not enabling x2apic, Intr-remapping init failed. [ 0.105192] Setting APIC routing to physical flat [ 0.112472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.215878] CPU0: AMD Athlon(tm) II X4 605e Processor stepping 02 [ 0.219498] installing Xen timer for CPU 0 [ 0.220039] Performance Events: Broken PMU hardware detected, using software events only. [ 0.225289] Booting Node 0, Processors #1 [ 0.020000] installing Xen timer for CPU 1 [ 0.380301] Brought up 2 CPUs [ 0.380304] Total of 2 processors activated (9270.14 BogoMIPS). [ 0.388052] devtmpfs: initialized [ 0.391075] print_constraints: dummy: [ 0.393129] Time: 9:27:27 Date: 09/06/11 [ 0.395417] NET: Registered protocol family 16 [ 0.395417] Trying to unpack rootfs image as initramfs... [ 0.412951] Extended Config Space enabled on 0 nodes [ 0.415855] ACPI: bus type pci registered [ 0.418421] PCI: Using configuration type 1 for base access [ 0.420013] PCI: Using configuration type 1 for extended access [ 0.424083] bio: create slab at 0 [ 0.433131] ACPI: Interpreter enabled [ 0.435292] ACPI: (supports S0 S3 S4 S5) [ 0.437795] ACPI: Using IOAPIC for interrupt routing [ 0.520732] ACPI: No dock devices found. [ 0.522945] HEST: Table not found. [ 0.524829] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.529964] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.530191] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.533843] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.537541] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.540016] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfbffffff] [ 0.550199] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, [ 0.550200] * this clock source is slow. Consider trying other clock sources [ 0.559990] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.576881] Freeing initrd memory: 12832k freed [ 0.677986] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.893891] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11) [ 0.897571] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.900962] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.904489] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11) [ 0.908112] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.910099] vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks=none [ 0.914462] vgaarb: loaded [ 0.916116] SCSI subsystem initialized [ 0.918216] usbcore: registered new interface driver usbfs [ 0.918216] usbcore: registered new interface driver hub [ 0.920053] usbcore: registered new device driver usb [ 0.922839] wmi: Mapper loaded [ 0.922839] PCI: Using ACPI for IRQ routing [ 0.923442] NetLabel: Initializing [ 0.925308] NetLabel: domain hash size = 128 [ 0.927638] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.930014] NetLabel: unlabeled traffic allowed by default [ 0.933063] Switching to clocksource xen [ 0.944873] Switched to NOHz mode on CPU #1 [ 0.945611] Switched to NOHz mode on CPU #0 [ 0.950378] AppArmor: AppArmor Filesystem Enabled [ 0.952923] pnp: PnP ACPI init [ 0.954677] ACPI: bus type pnp registered [ 0.956895] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.960804] system 00:02: [io 0x10c0-0x1141] has been reserved [ 0.963989] system 00:02: [io 0xb044-0xb047] has been reserved [ 0.967269] system 00:03: [io 0x08a0-0x08a3] has been reserved [ 0.970471] system 00:03: [io 0x0cc0-0x0ccf] has been reserved [ 0.973681] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.977211] xen map irq failed -22 [ 0.979160] xen map irq failed -22 [ 0.998922] pnp: PnP ACPI: found 12 devices [ 1.001204] ACPI: ACPI bus type pnp unregistered [ 1.009744] NET: Registered protocol family 2 [ 1.012274] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.016464] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 1.021179] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.025125] TCP: Hash tables configured (established 131072 bind 65536) [ 1.028732] TCP reno registered [ 1.030517] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.033691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.037217] NET: Registered protocol family 1 [ 1.039583] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.042847] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.045995] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.050389] audit: initializing netlink socket (disabled) [ 1.053308] type=2000 audit(1315301250.052:1): initialized [ 1.068829] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.074209] VFS: Disk quotas dquot_6.5.2 [ 1.076409] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.080596] fuse init (API version 7.16) [ 1.083050] msgmni has been set to 1989 [ 1.085717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.089888] io scheduler noop registered [ 1.092206] io scheduler deadline registered (default) [ 1.095131] io scheduler cfq registered [ 1.097306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.100396] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.104090] efifb: probing for efifb [ 1.106166] efifb: framebuffer at 0xf0000000, mapped to 0xffffc90000500000, using 1408k, total 1408k [ 1.111111] efifb: mode is 800x600x24, linelength=2400, pages=1 [ 1.114333] efifb: scrolling: redraw [ 1.116278] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.135955] Console: switching to colour frame buffer device 100x37 [ 1.156544] fb0: EFI VGA frame buffer device [ 1.159043] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.163084] ACPI: Power Button [PWRF] [ 1.165131] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 [ 1.169173] ACPI: Sleep Button [SLPF] [ 1.193469] ERST: Table is not found! [ 1.195573] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.228294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.748077] 00:0a: ttyS0 at I/O 0x3f8 (irq = -1) is a 16550A [ 1.758116] Linux agpgart interface v0.103 [ 1.767519] brd: module loaded [ 1.773841] loop: module loaded [ 1.779348] i2c-core: driver [adp5520] using legacy suspend method [ 1.789216] i2c-core: driver [adp5520] using legacy resume method [ 1.798204] scsi0 : ata_piix [ 1.800175] scsi1 : ata_piix [ 1.801930] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc300 irq 14 [ 1.805605] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc308 irq 15 [ 1.809567] Fixed MDIO Bus: probed [ 1.812916] PPP generic driver version 2.4.2 [ 1.815313] tun: Universal TUN/TAP device driver, 1.6 [ 1.818093] tun: (C) 1999-2004 Max Krasnyansky [ 1.821647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.825385] ehci_hcd 0000:00:06.0: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 1.829497] ehci_hcd 0000:00:06.0: EHCI Host Controller [ 1.832431] ehci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1 [ 1.836581] ehci_hcd 0000:00:06.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.841965] ehci_hcd 0000:00:06.0: irq 41, io mem 0xf304a000 [ 1.860144] ehci_hcd 0000:00:06.0: USB 2.0 started, EHCI 1.00 [ 1.865240] hub 1-0:1.0: USB hub found [ 1.868543] hub 1-0:1.0: 5 ports detected [ 1.872122] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.877514] ohci_hcd 0000:00:05.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 [ 1.883741] ohci_hcd 0000:00:05.0: OHCI Host Controller [ 1.888274] ohci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 2 [ 1.894790] ohci_hcd 0000:00:05.0: irq 36, io mem 0xf3049000 [ 1.954537] hub 2-0:1.0: USB hub found [ 1.960765] hub 2-0:1.0: 5 ports detected [ 1.967563] uhci_hcd: USB Universal Host Controller Interface driver [ 1.977898] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.984382] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.987131] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.990000] mousedev: PS/2 mouse device common for all mice [ 1.993812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.010265] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.013667] rtc0: alarms up to one day, 114 bytes nvram [ 2.017046] device-mapper: uevent: version 1.0.3 [ 2.021205] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx [ 2.028664] device-mapper: multipath: version 1.2.0 loaded [ 2.033341] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.038178] cpuidle: using governor ladder [ 2.040443] cpuidle: using governor menu [ 2.042848] TCP cubic registered [ 2.044727] NET: Registered protocol family 10 [ 2.047659] NET: Registered protocol family 17 [ 2.050297] Registering the dns_resolver key type [ 2.053061] registered taskstats version 1 [ 2.057016] Magic number: 11:347:474 [ 2.059242] rtc_cmos 00:05: setting system clock to 2011-09-06 09:27:30 UTC (1315301250) [ 2.063625] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.066943] EDD information not available. [ 2.071133] Freeing unused kernel memory: 880k freed [ 2.074227] Write protecting the kernel read-only data: 10240k [ 2.078057] Freeing unused kernel memory: 100k freed [ 2.085626] Freeing unused kernel memory: 1416k freed [ 2.115260] <30>udev[68]: starting version 167 [ 2.149513] xen map irq failed -22 [ 2.151459] xen-platform-pci 0000:00:03.0: PCI INT A: failed to register GSI [ 2.155404] xen-platform-pci: probe of 0000:00:03.0 failed with error -1 [ 2.222054] FDC 0 is a S82078B [ 2.226199] Initialising Xen virtual ethernet driver. [ 2.237744] Event-channel device installed. [ 2.330295] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 2.600686] input: ABBAHOME as /devices/pci0000:00/0000:00:05.0/usb2/2-2/2-2:1.0/input/input3 [ 2.615191] generic-usb 0003:05D5:6782.0001: input,hidraw0: USB HID v1.10 Keyboard [ABBAHOME] on usb-0000:00:05.0-2/input0 [ 2.633398] usbcore: registered new interface driver usbhid [ 2.638251] usbhid: USB HID core driver