[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.4-1) (waldi@xxxxxxxxxx) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 15:17:15 UTC 2012 [ 0.000000] Command line: placeholder root=/dev/mapper/muaddib-root ro rdblacklist=radeon radeon.modset=0 mem=8192M [ 0.000000] Freeing 9d-100 pfn range: 99 pages freed [ 0.000000] 1-1 mapping on 9d->100 [ 0.000000] Freeing 20000-20200 pfn range: 512 pages freed [ 0.000000] 1-1 mapping on 20000->20200 [ 0.000000] Freeing 40000-40200 pfn range: 512 pages freed [ 0.000000] 1-1 mapping on 40000->40200 [ 0.000000] Freeing 6ed6d-6edf2 pfn range: 133 pages freed [ 0.000000] 1-1 mapping on 6ed6d->6edf2 [ 0.000000] Freeing 6edf3-6ee7b pfn range: 136 pages freed [ 0.000000] 1-1 mapping on 6edf3->6ee7b [ 0.000000] Freeing 6f000-100000 pfn range: 593920 pages freed [ 0.000000] 1-1 mapping on 6f000->100000 [ 0.000000] Released 595312 pages of unused memory [ 0.000000] Set 595312 page(s) to 1-1 mapping [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] Xen: 000000000009d800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] Xen: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] Xen: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] Xen: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] Xen: 0000000040200000 - 000000006ed6d000 (usable) [ 0.000000] Xen: 000000006ed6d000 - 000000006edbc000 (ACPI NVS) [ 0.000000] Xen: 000000006edbc000 - 000000006edc5000 (ACPI data) [ 0.000000] Xen: 000000006edc5000 - 000000006edf2000 (reserved) [ 0.000000] Xen: 000000006edf2000 - 000000006edf3000 (usable) [ 0.000000] Xen: 000000006edf3000 - 000000006ee03000 (reserved) [ 0.000000] Xen: 000000006ee03000 - 000000006ee10000 (ACPI NVS) [ 0.000000] Xen: 000000006ee10000 - 000000006ee38000 (reserved) [ 0.000000] Xen: 000000006ee38000 - 000000006ee7b000 (ACPI NVS) [ 0.000000] Xen: 000000006ee7b000 - 000000006f000000 (usable) [ 0.000000] Xen: 000000006f800000 - 000000007fa00000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed40000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000047fe00000 (usable) [ 0.000000] e820 remove range: 0000000200000000 - ffffffffffffffff (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] user-defined physical RAM map: [ 0.000000] user: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] user: 000000000009d800 - 0000000000100000 (reserved) [ 0.000000] user: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] user: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] user: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] user: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] user: 0000000040200000 - 000000006ed6d000 (usable) [ 0.000000] user: 000000006ed6d000 - 000000006edbc000 (ACPI NVS) [ 0.000000] user: 000000006edbc000 - 000000006edc5000 (ACPI data) [ 0.000000] user: 000000006edc5000 - 000000006edf2000 (reserved) [ 0.000000] user: 000000006edf2000 - 000000006edf3000 (usable) [ 0.000000] user: 000000006edf3000 - 000000006ee03000 (reserved) [ 0.000000] user: 000000006ee03000 - 000000006ee10000 (ACPI NVS) [ 0.000000] user: 000000006ee10000 - 000000006ee38000 (reserved) [ 0.000000] user: 000000006ee38000 - 000000006ee7b000 (ACPI NVS) [ 0.000000] user: 000000006ee7b000 - 000000006f000000 (usable) [ 0.000000] user: 000000006f800000 - 000000007fa00000 (reserved) [ 0.000000] user: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] user: 00000000fed1c000 - 00000000fed40000 (reserved) [ 0.000000] user: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] user: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] user: 0000000100000000 - 0000000200000000 (usable) [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z68 Extreme4 Gen3, BIOS P1.00 07/08/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x200000 max_arch_pfn = 0x400000000 [ 0.000000] x2apic enabled by BIOS, switching to x2apic ops [ 0.000000] last_pfn = 0x6f000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fd230] fd230 [ 0.000000] initial memory mapped : 0 - 03a2c000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000006f000000 [ 0.000000] 0000000000 - 006f000000 page 4k [ 0.000000] kernel direct mapping tables up to 6f000000 @ c85000-1000000 [ 0.000000] xen: setting RW the range fd4000 - 1000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000200000000 [ 0.000000] 0100000000 - 0200000000 page 4k [ 0.000000] kernel direct mapping tables up to 200000000 @ 6dd64000-6ed6d000 [ 0.000000] xen: setting RW the range 6e568000 - 6ed6d000 [ 0.000000] RAMDISK: 0193a000 - 03a2c000 [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 000000006edbc070 0005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000006edc4158 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 000000006edbc158 07FFB (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 000000006ee07f80 00040 [ 0.000000] ACPI: APIC 000000006edc4250 00092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 000000006edc42e8 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 000000006edc44c0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: AAFT 000000006edc4500 000D3 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 000000006edc45d8 00038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: XMAR 000000006edc4610 000E8 (v01 ALASKA A M I 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to cluster x2apic. [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000200000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000200000000 [ 0.000000] NODE_DATA [00000001ffffb000 - 00000001ffffffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00200000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x0006ed6d [ 0.000000] 0: 0x0006edf2 -> 0x0006edf3 [ 0.000000] 0: 0x0006ee7b -> 0x0006f000 [ 0.000000] 0: 0x00100000 -> 0x00200000 [ 0.000000] On node 0 totalpages: 1501824 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 852 pages reserved [ 0.000000] DMA zone: 3073 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 434987 pages, LIFO batch:31 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 000000006ed6d000 - 000000006edbc000 [ 0.000000] PM: Registered nosave memory: 000000006edbc000 - 000000006edc5000 [ 0.000000] PM: Registered nosave memory: 000000006edc5000 - 000000006edf2000 [ 0.000000] PM: Registered nosave memory: 000000006edf3000 - 000000006ee03000 [ 0.000000] PM: Registered nosave memory: 000000006ee03000 - 000000006ee10000 [ 0.000000] PM: Registered nosave memory: 000000006ee10000 - 000000006ee38000 [ 0.000000] PM: Registered nosave memory: 000000006ee38000 - 000000006ee7b000 [ 0.000000] PM: Registered nosave memory: 000000006f000000 - 000000006f800000 [ 0.000000] PM: Registered nosave memory: 000000006f800000 - 000000007fa00000 [ 0.000000] PM: Registered nosave memory: 000000007fa00000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000 [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 7fa00000 (gap: 7fa00000:7f200000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.2 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801ffeca000 s82304 r8192 d24192 u114688 [ 0.000000] pcpu-alloc: s82304 r8192 d24192 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 4.040278] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1472300 [ 4.040279] Policy zone: Normal [ 4.040281] Kernel command line: placeholder root=/dev/mapper/muaddib-root ro rdblacklist=radeon radeon.modset=0 mem=8192M [ 4.040331] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 4.057191] Placing 64MB software IO TLB between ffff8801f5a00000 - ffff8801f9a00000 [ 4.057193] software IO TLB at phys 0x1f5a00000 - 0x1f9a00000 [ 4.073111] Memory: 5787228k/8388608k available (3368k kernel code, 2381312k absent, 220068k reserved, 3361k data, 568k init) [ 4.073175] Hierarchical RCU implementation. [ 4.073176] RCU dyntick-idle grace-period acceleration is enabled. [ 4.073183] NR_IRQS:33024 nr_irqs:2048 16 [ 4.073234] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 4.073237] xen: registering gsi 9 triggering 0 polarity 0 [ 4.073243] xen: --> pirq=9 -> irq=9 (gsi=9) [ 4.073262] xen: acpi sci 9 [ 4.073264] xen: --> pirq=1 -> irq=1 (gsi=1) [ 4.073267] xen: --> pirq=2 -> irq=2 (gsi=2) [ 4.073269] xen: --> pirq=3 -> irq=3 (gsi=3) [ 4.073271] xen: --> pirq=4 -> irq=4 (gsi=4) [ 4.073274] xen: --> pirq=5 -> irq=5 (gsi=5) [ 4.073276] xen: --> pirq=6 -> irq=6 (gsi=6) [ 4.073278] xen: --> pirq=7 -> irq=7 (gsi=7) [ 4.073281] xen: --> pirq=8 -> irq=8 (gsi=8) [ 4.073282] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 4.073284] xen: --> pirq=9 -> irq=9 (gsi=9) [ 4.073286] xen: --> pirq=10 -> irq=10 (gsi=10) [ 4.073288] xen: --> pirq=11 -> irq=11 (gsi=11) [ 4.073291] xen: --> pirq=12 -> irq=12 (gsi=12) [ 4.073293] xen: --> pirq=13 -> irq=13 (gsi=13) [ 4.073295] xen: --> pirq=14 -> irq=14 (gsi=14) [ 4.073298] xen: --> pirq=15 -> irq=15 (gsi=15) [ 4.075061] Console: colour VGA+ 80x25 [ 4.079807] console [tty0] enabled [ 4.079858] Xen: using vcpuop timer interface [ 4.079861] installing Xen timer for CPU 0 [ 4.079904] Detected 3392.376 MHz processor. [ 4.079938] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.75 BogoMIPS (lpj=13569504) [ 4.080001] pid_max: default: 32768 minimum: 301 [ 4.080065] Security Framework initialized [ 4.080096] AppArmor: AppArmor disabled by boot time parameter [ 4.081740] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 4.083739] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 4.084379] Mount-cache hash table entries: 256 [ 4.084505] Initializing cgroup subsys cpuacct [ 4.084537] Initializing cgroup subsys memory [ 4.084577] Initializing cgroup subsys devices [ 4.084607] Initializing cgroup subsys freezer [ 4.084638] Initializing cgroup subsys net_cls [ 4.084669] Initializing cgroup subsys blkio [ 4.084749] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 4.084749] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 4.084817] CPU: Physical Processor ID: 0 [ 4.084846] CPU: Processor Core ID: 0 [ 4.085304] ACPI: Core revision 20110623 [ 4.095208] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 4.095371] NMI watchdog disabled (cpu0): hardware events not enabled [ 4.095489] installing Xen timer for CPU 1 [ 4.095626] NMI watchdog disabled (cpu1): hardware events not enabled [ 4.095678] Brought up 2 CPUs [ 4.095897] devtmpfs: initialized [ 4.098078] PM: Registering ACPI NVS region at 6ed6d000 (323584 bytes) [ 4.098128] PM: Registering ACPI NVS region at 6ee03000 (53248 bytes) [ 4.099460] PM: Registering ACPI NVS region at 6ee38000 (274432 bytes) [ 4.099578] Grant table initialized [ 4.099660] print_constraints: dummy: [ 4.099740] NET: Registered protocol family 16 [ 4.099926] ACPI: bus type pci registered [ 4.100018] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 4.100067] PCI: not using MMCONFIG [ 4.100097] PCI: Using configuration type 1 for base access [ 4.100749] bio: create slab at 0 [ 4.100887] ACPI: Added _OSI(Module Device) [ 4.100919] ACPI: Added _OSI(Processor Device) [ 4.100950] ACPI: Added _OSI(3.0 _SCP Extensions) [ 4.100981] ACPI: Added _OSI(Processor Aggregator Device) [ 4.102708] ACPI: EC: Look up EC in DSDT [ 4.104547] ACPI: Executed 1 blocks of module-level executable AML code [ 4.111819] ACPI: SSDT 000000006ee0f898 006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 4.112518] ACPI: Dynamic OEM Table Load: [ 4.112572] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 4.112708] ACPI: SSDT 000000006ee06d98 000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 4.113231] ACPI: Dynamic OEM Table Load: [ 4.113285] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 4.113832] ACPI: Interpreter enabled [ 4.113863] ACPI: (supports S0 S1 S3 S4 S5) [ 4.113975] ACPI: Using IOAPIC for interrupt routing [ 4.114034] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 4.114187] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 4.166851] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 4.174065] ACPI: No dock devices found. [ 4.174096] HEST: Table not found. [ 4.174126] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.174604] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.175063] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] [ 4.175098] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] [ 4.175132] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] [ 4.175166] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.175200] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.175245] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 4.175291] pci_root PNP0A08:00: host bridge window [mem 0x7fa00000-0xffffffff] [ 4.175351] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600 [ 4.175429] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 4.175506] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.175509] pci 0000:00:01.0: PME# disabled [ 4.175548] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300 [ 4.175571] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit] [ 4.175583] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 4.175592] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 4.175713] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 4.175757] pci 0000:00:16.0: reg 10: [mem 0xfbf04000-0xfbf0400f 64bit] [ 4.175908] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 4.175913] pci 0000:00:16.0: PME# disabled [ 4.175976] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 4.176015] pci 0000:00:1a.0: reg 10: [mem 0xfbf03000-0xfbf033ff] [ 4.176197] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 4.176203] pci 0000:00:1a.0: PME# disabled [ 4.176244] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 4.176409] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 4.176415] pci 0000:00:1c.0: PME# disabled [ 4.176466] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 4.176632] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 4.176638] pci 0000:00:1c.4: PME# disabled [ 4.176685] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 4.176849] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 4.176855] pci 0000:00:1c.5: PME# disabled [ 4.176900] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604 [ 4.177064] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 4.177070] pci 0000:00:1c.6: PME# disabled [ 4.177116] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604 [ 4.177282] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 4.177288] pci 0000:00:1c.7: PME# disabled [ 4.177340] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 4.177380] pci 0000:00:1d.0: reg 10: [mem 0xfbf02000-0xfbf023ff] [ 4.177561] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 4.177568] pci 0000:00:1d.0: PME# disabled [ 4.177608] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601 [ 4.177840] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106 [ 4.177881] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7] [ 4.177897] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3] [ 4.177912] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097] [ 4.177928] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083] [ 4.177943] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 4.177959] pci 0000:00:1f.2: reg 24: [mem 0xfbf01000-0xfbf017ff] [ 4.178062] pci 0000:00:1f.2: PME# supported from D3hot [ 4.178067] pci 0000:00:1f.2: PME# disabled [ 4.178099] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 4.178130] pci 0000:00:1f.3: reg 10: [mem 0xfbf00000-0xfbf000ff 64bit] [ 4.178175] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 4.178292] pci 0000:01:00.0: [1002:6719] type 0 class 0x000300 [ 4.178314] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.178331] pci 0000:01:00.0: reg 18: [mem 0xfbe20000-0xfbe3ffff 64bit] [ 4.178343] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] [ 4.178365] pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref] [ 4.178421] pci 0000:01:00.0: supports D1 D2 [ 4.178455] pci 0000:01:00.1: [1002:aa80] type 0 class 0x000403 [ 4.178476] pci 0000:01:00.1: reg 10: [mem 0xfbe40000-0xfbe43fff 64bit] [ 4.178583] pci 0000:01:00.1: supports D1 D2 [ 4.185391] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 4.185445] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 4.185449] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 4.185455] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.185581] pci 0000:02:00.0: [10b5:8112] type 1 class 0x000604 [ 4.185831] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 4.185897] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 4.185933] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 4.186093] pci 0000:03:04.0: [13f6:8788] type 0 class 0x000401 [ 4.186144] pci 0000:03:04.0: reg 10: [io 0xd000-0xd0ff] [ 4.186389] pci 0000:03:04.0: supports D1 D2 [ 4.186506] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 4.186545] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff] [ 4.186700] pci 0000:04:00.0: [1b4b:9120] type 0 class 0x000106 [ 4.186728] pci 0000:04:00.0: reg 10: [io 0xc040-0xc047] [ 4.186748] pci 0000:04:00.0: reg 14: [io 0xc030-0xc033] [ 4.186768] pci 0000:04:00.0: reg 18: [io 0xc020-0xc027] [ 4.186789] pci 0000:04:00.0: reg 1c: [io 0xc010-0xc013] [ 4.186809] pci 0000:04:00.0: reg 20: [io 0xc000-0xc00f] [ 4.186830] pci 0000:04:00.0: reg 24: [mem 0xfbd10000-0xfbd107ff] [ 4.186851] pci 0000:04:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref] [ 4.186950] pci 0000:04:00.0: PME# supported from D3hot [ 4.186957] pci 0000:04:00.0: PME# disabled [ 4.187024] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 4.187060] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 4.187066] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 4.187198] pci 0000:05:00.0: [1b6f:7023] type 0 class 0x000c03 [ 4.187240] pci 0000:05:00.0: reg 10: [mem 0xfbc00000-0xfbc07fff 64bit] [ 4.187447] pci 0000:05:00.0: supports D1 D2 [ 4.187449] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.187456] pci 0000:05:00.0: PME# disabled [ 4.187535] pci 0000:00:1c.5: PCI bridge to [bus 05-05] [ 4.187576] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff] [ 4.187709] pci 0000:06:00.0: [1b6f:7023] type 0 class 0x000c03 [ 4.187750] pci 0000:06:00.0: reg 10: [mem 0xfbb00000-0xfbb07fff 64bit] [ 4.187956] pci 0000:06:00.0: supports D1 D2 [ 4.187958] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.187965] pci 0000:06:00.0: PME# disabled [ 4.188044] pci 0000:00:1c.6: PCI bridge to [bus 06-06] [ 4.188084] pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff] [ 4.188215] pci 0000:07:00.0: [10b5:8608] type 1 class 0x000604 [ 4.188243] pci 0000:07:00.0: reg 10: [mem 0xfba00000-0xfba1ffff] [ 4.188422] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 4.188429] pci 0000:07:00.0: PME# disabled [ 4.188529] pci 0000:00:1c.7: PCI bridge to [bus 07-10] [ 4.188565] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff] [ 4.188570] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfbafffff] [ 4.188581] pci 0000:00:1c.7: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.188738] pci 0000:08:01.0: [10b5:8608] type 1 class 0x000604 [ 4.188950] pci 0000:08:01.0: PME# supported from D0 D3hot D3cold [ 4.188957] pci 0000:08:01.0: PME# disabled [ 4.189054] pci 0000:08:04.0: [10b5:8608] type 1 class 0x000604 [ 4.189264] pci 0000:08:04.0: PME# supported from D0 D3hot D3cold [ 4.189271] pci 0000:08:04.0: PME# disabled [ 4.189363] pci 0000:08:05.0: [10b5:8608] type 1 class 0x000604 [ 4.189574] pci 0000:08:05.0: PME# supported from D0 D3hot D3cold [ 4.189581] pci 0000:08:05.0: PME# disabled [ 4.189678] pci 0000:08:06.0: [10b5:8608] type 1 class 0x000604 [ 4.189887] pci 0000:08:06.0: PME# supported from D0 D3hot D3cold [ 4.189895] pci 0000:08:06.0: PME# disabled [ 4.189994] pci 0000:08:07.0: [10b5:8608] type 1 class 0x000604 [ 4.190203] pci 0000:08:07.0: PME# supported from D0 D3hot D3cold [ 4.190210] pci 0000:08:07.0: PME# disabled [ 4.190311] pci 0000:08:08.0: [10b5:8608] type 1 class 0x000604 [ 4.190520] pci 0000:08:08.0: PME# supported from D0 D3hot D3cold [ 4.190527] pci 0000:08:08.0: PME# disabled [ 4.190632] pci 0000:08:09.0: [10b5:8608] type 1 class 0x000604 [ 4.190841] pci 0000:08:09.0: PME# supported from D0 D3hot D3cold [ 4.190849] pci 0000:08:09.0: PME# disabled [ 4.190982] pci 0000:07:00.0: PCI bridge to [bus 08-10] [ 4.191025] pci 0000:07:00.0: bridge window [io 0xb000-0xbfff] [ 4.191032] pci 0000:07:00.0: bridge window [mem 0xfb800000-0xfb9fffff] [ 4.191045] pci 0000:07:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.191167] pci 0000:08:01.0: PCI bridge to [bus 09-09] [ 4.191393] pci 0000:0a:00.0: [1b21:1080] type 1 class 0x000604 [ 4.191659] pci 0000:0a:00.0: supports D1 D2 [ 4.191660] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.191669] pci 0000:0a:00.0: PME# disabled [ 4.191760] pci 0000:08:04.0: PCI bridge to [bus 0a-0b] [ 4.192093] pci 0000:0a:00.0: PCI bridge to [bus 0b-0b] [ 4.192341] pci 0000:0c:00.0: [1106:3403] type 0 class 0x000c00 [ 4.192389] pci 0000:0c:00.0: reg 10: [mem 0xfb900000-0xfb9007ff 64bit] [ 4.192414] pci 0000:0c:00.0: reg 18: [io 0xb000-0xb0ff] [ 4.192630] pci 0000:0c:00.0: supports D2 [ 4.192632] pci 0000:0c:00.0: PME# supported from D2 D3hot D3cold [ 4.192640] pci 0000:0c:00.0: PME# disabled [ 4.192734] pci 0000:08:05.0: PCI bridge to [bus 0c-0c] [ 4.192776] pci 0000:08:05.0: bridge window [io 0xb000-0xbfff] [ 4.192783] pci 0000:08:05.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 4.192970] pci 0000:0d:00.0: [14e4:16b1] type 0 class 0x000200 [ 4.193020] pci 0000:0d:00.0: reg 10: [mem 0xd0010000-0xd001ffff 64bit pref] [ 4.193060] pci 0000:0d:00.0: reg 18: [mem 0xd0000000-0xd000ffff 64bit pref] [ 4.193135] pci 0000:0d:00.0: reg 30: [mem 0xfb800000-0xfb8007ff pref] [ 4.193281] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 4.193289] pci 0000:0d:00.0: PME# disabled [ 4.193410] pci 0000:08:06.0: PCI bridge to [bus 0d-0d] [ 4.193458] pci 0000:08:06.0: bridge window [mem 0xfb800000-0xfb8fffff] [ 4.193471] pci 0000:08:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.193595] pci 0000:08:07.0: PCI bridge to [bus 0e-0e] [ 4.193776] pci 0000:08:08.0: PCI bridge to [bus 0f-0f] [ 4.193962] pci 0000:08:09.0: PCI bridge to [bus 10-10] [ 4.194169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.194352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 4.194404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 4.194447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 4.194490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 4.194533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 4.194579] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21._PRT] [ 4.194769] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR31._PRT] [ 4.194818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34._PRT] [ 4.194868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR34.BR22._PRT] [ 4.194940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR35._PRT] [ 4.194988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR36._PRT] [ 4.195036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR37._PRT] [ 4.195084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR38._PRT] [ 4.195132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR21.BR39._PRT] [ 4.195175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 4.195369] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 4.195794] pci0000:00: ACPI _OSC control (0x1c) granted [ 4.202690] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 4.202926] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 4.203158] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 4.203376] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 4.203595] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 4.203848] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 4.204102] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 4.204355] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 4.204564] xen/balloon: Initialising balloon driver. [ 4.204611] xen-balloon: Initialising balloon driver. [ 4.204706] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 4.204762] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 4.204815] vgaarb: loaded [ 4.204842] vgaarb: bridge control possible 0000:01:00.0 [ 4.204873] vgaarb: no bridge control possible 0000:00:02.0 [ 4.204935] PCI: Using ACPI for IRQ routing [ 4.219490] PCI: pci_cache_line_size set to 64 bytes [ 4.219674] reserve RAM buffer: 000000000009d000 - 000000000009ffff [ 4.219676] reserve RAM buffer: 000000006ed6d000 - 000000006fffffff [ 4.219680] reserve RAM buffer: 000000006edf3000 - 000000006fffffff [ 4.219683] reserve RAM buffer: 000000006f000000 - 000000006fffffff [ 4.219784] Switching to clocksource xen [ 4.221344] pnp: PnP ACPI init [ 4.221382] ACPI: bus type pnp registered [ 4.221629] pnp 00:00: [bus 00-ff] [ 4.221631] pnp 00:00: [io 0x0cf8-0x0cff] [ 4.221633] pnp 00:00: [io 0x0000-0x03af window] [ 4.221635] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 4.221636] pnp 00:00: [io 0x03b0-0x03df window] [ 4.221638] pnp 00:00: [io 0x0d00-0xffff window] [ 4.221640] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 4.221641] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 4.221643] pnp 00:00: [mem 0x7fa00000-0xffffffff window] [ 4.221645] pnp 00:00: [mem 0x00000000 window] [ 4.221687] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 4.221786] pnp 00:01: [mem 0xfed10000-0xfed19fff] [ 4.221787] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 4.221789] pnp 00:01: [mem 0xfed90000-0xfed93fff] [ 4.221791] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 4.221792] pnp 00:01: [mem 0xfee00000-0xfee0ffff] [ 4.221833] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved [ 4.221868] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 4.221902] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved [ 4.221937] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 4.221971] system 00:01: [mem 0xfee00000-0xfee0ffff] could not be reserved [ 4.222006] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 4.222090] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 4.222092] pnp 00:02: [io 0x0290-0x029f] [ 4.222093] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 4.222131] system 00:02: [io 0x0290-0x029f] has been reserved [ 4.222165] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.222645] pnp 00:03: [dma 4] [ 4.222647] pnp 00:03: [io 0x0000-0x000f] [ 4.222649] pnp 00:03: [io 0x0081-0x0083] [ 4.222651] pnp 00:03: [io 0x0087] [ 4.222653] pnp 00:03: [io 0x0089-0x008b] [ 4.222654] pnp 00:03: [io 0x008f] [ 4.222655] pnp 00:03: [io 0x00c0-0x00df] [ 4.222677] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 4.222688] pnp 00:04: [io 0x0070-0x0071] [ 4.222690] xen: registering gsi 8 triggering 1 polarity 0 [ 4.222693] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 4.222725] xen: --> pirq=8 -> irq=8 (gsi=8) [ 4.222743] pnp 00:04: [irq 8] [ 4.222764] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 4.222773] pnp 00:05: [io 0x0061] [ 4.222793] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 4.222819] pnp 00:06: [io 0x0010-0x001f] [ 4.222821] pnp 00:06: [io 0x0022-0x003f] [ 4.222822] pnp 00:06: [io 0x0044-0x005f] [ 4.222824] pnp 00:06: [io 0x0062-0x0063] [ 4.222825] pnp 00:06: [io 0x0065-0x006f] [ 4.222827] pnp 00:06: [io 0x0072-0x007f] [ 4.222828] pnp 00:06: [io 0x0080] [ 4.222830] pnp 00:06: [io 0x0084-0x0086] [ 4.222831] pnp 00:06: [io 0x0088] [ 4.222833] pnp 00:06: [io 0x008c-0x008e] [ 4.222834] pnp 00:06: [io 0x0090-0x009f] [ 4.222835] pnp 00:06: [io 0x00a2-0x00bf] [ 4.222837] pnp 00:06: [io 0x00e0-0x00ef] [ 4.222838] pnp 00:06: [io 0x04d0-0x04d1] [ 4.222881] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 4.222915] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.222923] pnp 00:07: [io 0x00f0-0x00ff] [ 4.222925] xen: registering gsi 13 triggering 1 polarity 0 [ 4.222927] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 4.222959] xen: --> pirq=13 -> irq=13 (gsi=13) [ 4.222976] pnp 00:07: [irq 13] [ 4.222999] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 4.223396] pnp 00:08: [io 0x03f8-0x03ff] [ 4.223398] xen: registering gsi 4 triggering 1 polarity 0 [ 4.223400] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 4.223432] xen: --> pirq=4 -> irq=4 (gsi=4) [ 4.223448] pnp 00:08: [irq 4] [ 4.223450] pnp 00:08: [dma 0 disabled] [ 4.223500] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 4.223815] pnp 00:09: [io 0x0400-0x0453] [ 4.223817] pnp 00:09: [io 0x0458-0x047f] [ 4.223818] pnp 00:09: [io 0x1180-0x119f] [ 4.223820] pnp 00:09: [io 0x0500-0x057f] [ 4.223822] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 4.223823] pnp 00:09: [mem 0xfec00000-0xfecfffff] [ 4.223825] pnp 00:09: [mem 0xfed08000-0xfed08fff] [ 4.223826] pnp 00:09: [mem 0xff000000-0xffffffff] [ 4.223871] system 00:09: [io 0x0400-0x0453] has been reserved [ 4.223905] system 00:09: [io 0x0458-0x047f] has been reserved [ 4.223938] system 00:09: [io 0x1180-0x119f] has been reserved [ 4.223971] system 00:09: [io 0x0500-0x057f] has been reserved [ 4.224005] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 4.224039] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 4.224074] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved [ 4.224108] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 4.224142] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 4.224202] pnp 00:0a: [io 0x0454-0x0457] [ 4.224243] system 00:0a: [io 0x0454-0x0457] has been reserved [ 4.224277] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 4.224438] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 4.224474] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 4.224685] pnp: PnP ACPI: found 12 devices [ 4.224715] ACPI: ACPI bus type pnp unregistered [ 4.230268] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 4.230318] PCI: max bus depth: 4 pci_try_num: 5 [ 4.230559] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 4.230592] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 4.230628] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 4.230664] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.230715] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 4.230750] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff] [ 4.230815] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 4.230849] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 4.230902] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 4.230935] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 4.230975] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 4.231021] pci 0000:00:1c.5: PCI bridge to [bus 05-05] [ 4.231060] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff] [ 4.231107] pci 0000:00:1c.6: PCI bridge to [bus 06-06] [ 4.231144] pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff] [ 4.231192] pci 0000:08:01.0: PCI bridge to [bus 09-09] [ 4.231248] pci 0000:0a:00.0: PCI bridge to [bus 0b-0b] [ 4.231312] pci 0000:08:04.0: PCI bridge to [bus 0a-0b] [ 4.231368] pci 0000:08:05.0: PCI bridge to [bus 0c-0c] [ 4.231402] pci 0000:08:05.0: bridge window [io 0xb000-0xbfff] [ 4.231444] pci 0000:08:05.0: bridge window [mem 0xfb900000-0xfb9fffff] [ 4.231494] pci 0000:08:06.0: PCI bridge to [bus 0d-0d] [ 4.231534] pci 0000:08:06.0: bridge window [mem 0xfb800000-0xfb8fffff] [ 4.231573] pci 0000:08:06.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.231630] pci 0000:08:07.0: PCI bridge to [bus 0e-0e] [ 4.231687] pci 0000:08:08.0: PCI bridge to [bus 0f-0f] [ 4.231744] pci 0000:08:09.0: PCI bridge to [bus 10-10] [ 4.231800] pci 0000:07:00.0: PCI bridge to [bus 08-10] [ 4.231834] pci 0000:07:00.0: bridge window [io 0xb000-0xbfff] [ 4.231876] pci 0000:07:00.0: bridge window [mem 0xfb800000-0xfb9fffff] [ 4.231915] pci 0000:07:00.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.231972] pci 0000:00:1c.7: PCI bridge to [bus 07-10] [ 4.232005] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff] [ 4.232044] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfbafffff] [ 4.232083] pci 0000:00:1c.7: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.232142] xen: registering gsi 16 triggering 0 polarity 1 [ 4.232152] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.232167] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.232204] pci 0000:00:01.0: setting latency timer to 64 [ 4.232212] xen: registering gsi 17 triggering 0 polarity 1 [ 4.232216] xen: --> pirq=17 -> irq=17 (gsi=17) [ 4.232231] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.232269] pci 0000:00:1c.0: setting latency timer to 64 [ 4.232277] xen: registering gsi 16 triggering 0 polarity 1 [ 4.232278] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.232310] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.232311] Already setup the GSI :16 [ 4.232340] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.232382] pci 0000:02:00.0: setting latency timer to 64 [ 4.232392] xen: registering gsi 17 triggering 0 polarity 1 [ 4.232394] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 4.232425] xen: --> pirq=17 -> irq=17 (gsi=17) [ 4.232426] Already setup the GSI :17 [ 4.232455] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.232493] pci 0000:00:1c.4: setting latency timer to 64 [ 4.232502] xen: registering gsi 16 triggering 0 polarity 1 [ 4.232503] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.232535] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.232536] Already setup the GSI :16 [ 4.232565] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 4.232603] pci 0000:00:1c.5: setting latency timer to 64 [ 4.232612] xen: registering gsi 18 triggering 0 polarity 1 [ 4.232616] xen: --> pirq=18 -> irq=18 (gsi=18) [ 4.232631] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.232669] pci 0000:00:1c.6: setting latency timer to 64 [ 4.232678] xen: registering gsi 19 triggering 0 polarity 1 [ 4.232681] xen: --> pirq=19 -> irq=19 (gsi=19) [ 4.232696] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.232733] pci 0000:00:1c.7: setting latency timer to 64 [ 4.232743] xen: registering gsi 19 triggering 0 polarity 1 [ 4.232745] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 4.232777] xen: --> pirq=19 -> irq=19 (gsi=19) [ 4.232778] Already setup the GSI :19 [ 4.232807] pci 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.232847] pci 0000:07:00.0: setting latency timer to 64 [ 4.232857] xen: registering gsi 16 triggering 0 polarity 1 [ 4.232859] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.232890] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.232891] Already setup the GSI :16 [ 4.232921] pci 0000:08:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.232960] pci 0000:08:01.0: setting latency timer to 64 [ 4.232971] xen: registering gsi 19 triggering 0 polarity 1 [ 4.232972] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 4.233004] xen: --> pirq=19 -> irq=19 (gsi=19) [ 4.233005] Already setup the GSI :19 [ 4.233034] pci 0000:08:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.233074] pci 0000:08:04.0: setting latency timer to 64 [ 4.233086] xen: registering gsi 19 triggering 0 polarity 1 [ 4.233087] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 4.233119] xen: --> pirq=19 -> irq=19 (gsi=19) [ 4.233120] Already setup the GSI :19 [ 4.233150] pci 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.233190] pci 0000:0a:00.0: setting latency timer to 64 [ 4.233202] xen: registering gsi 16 triggering 0 polarity 1 [ 4.233203] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.233235] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.233236] Already setup the GSI :16 [ 4.234560] pci 0000:08:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.234599] pci 0000:08:05.0: setting latency timer to 64 [ 4.234610] xen: registering gsi 17 triggering 0 polarity 1 [ 4.234611] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 4.234643] xen: --> pirq=17 -> irq=17 (gsi=17) [ 4.234644] Already setup the GSI :17 [ 4.234673] pci 0000:08:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.234713] pci 0000:08:06.0: setting latency timer to 64 [ 4.234723] xen: registering gsi 18 triggering 0 polarity 1 [ 4.234725] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 4.234756] xen: --> pirq=18 -> irq=18 (gsi=18) [ 4.234758] Already setup the GSI :18 [ 4.234787] pci 0000:08:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.234826] pci 0000:08:07.0: setting latency timer to 64 [ 4.234837] xen: registering gsi 19 triggering 0 polarity 1 [ 4.234838] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 4.234870] xen: --> pirq=19 -> irq=19 (gsi=19) [ 4.234871] Already setup the GSI :19 [ 4.234900] pci 0000:08:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.234939] pci 0000:08:08.0: setting latency timer to 64 [ 4.234950] xen: registering gsi 16 triggering 0 polarity 1 [ 4.234952] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.234983] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.234985] Already setup the GSI :16 [ 4.235013] pci 0000:08:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.235053] pci 0000:08:09.0: setting latency timer to 64 [ 4.235057] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 4.235059] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 4.235060] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 4.235062] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 4.235063] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 4.235065] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 4.235067] pci_bus 0000:00: resource 10 [mem 0x7fa00000-0xffffffff] [ 4.235068] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 4.235070] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff] [ 4.235071] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 4.235073] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 4.235075] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 4.235076] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 4.235078] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 4.235079] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 4.235081] pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 4.235082] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff] [ 4.235084] pci_bus 0000:07: resource 1 [mem 0xfb800000-0xfbafffff] [ 4.235085] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.235087] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff] [ 4.235088] pci_bus 0000:08: resource 1 [mem 0xfb800000-0xfb9fffff] [ 4.235090] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.235092] pci_bus 0000:0c: resource 0 [io 0xb000-0xbfff] [ 4.235093] pci_bus 0000:0c: resource 1 [mem 0xfb900000-0xfb9fffff] [ 4.235095] pci_bus 0000:0d: resource 1 [mem 0xfb800000-0xfb8fffff] [ 4.235097] pci_bus 0000:0d: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 4.235149] NET: Registered protocol family 2 [ 4.235626] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 4.237523] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 4.238833] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.239008] TCP: Hash tables configured (established 524288 bind 65536) [ 4.239042] TCP reno registered [ 4.239098] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 4.239174] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 4.239318] NET: Registered protocol family 1 [ 4.239368] pci 0000:00:02.0: Boot video device [ 4.463995] PCI: CLS 64 bytes, default 64 [ 4.464034] Unpacking initramfs... [ 4.489942] Freeing initrd memory: 33736k freed [ 4.495428] audit: initializing netlink socket (disabled) [ 4.495473] type=2000 audit(1329948441.475:1): initialized [ 4.511215] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.511481] VFS: Disk quotas dquot_6.5.2 [ 4.511544] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.511659] msgmni has been set to 11369 [ 4.511859] alg: No test for stdrng (krng) [ 4.511919] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.511968] io scheduler noop registered [ 4.511998] io scheduler deadline registered [ 4.512042] io scheduler cfq registered (default) [ 4.512178] pcieport 0000:00:01.0: setting latency timer to 64 [ 4.512335] pcieport 0000:00:1c.0: setting latency timer to 64 [ 4.512552] pcieport 0000:00:1c.4: setting latency timer to 64 [ 4.512769] pcieport 0000:00:1c.5: setting latency timer to 64 [ 4.512986] pcieport 0000:00:1c.6: setting latency timer to 64 [ 4.513202] pcieport 0000:00:1c.7: setting latency timer to 64 [ 4.513437] pcieport 0000:07:00.0: setting latency timer to 64 [ 4.513747] pcieport 0000:08:01.0: setting latency timer to 64 [ 4.514058] pcieport 0000:08:04.0: setting latency timer to 64 [ 4.514371] pcieport 0000:08:05.0: setting latency timer to 64 [ 4.514681] pcieport 0000:08:06.0: setting latency timer to 64 [ 4.514992] pcieport 0000:08:07.0: setting latency timer to 64 [ 4.515303] pcieport 0000:08:08.0: setting latency timer to 64 [ 4.515614] pcieport 0000:08:09.0: setting latency timer to 64 [ 4.515958] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 4.515994] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 4.516028] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 4.516063] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 4.516098] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 4.516132] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 4.516166] pci 0000:03:04.0: Signaling PME through PCIe PME interrupt [ 4.516204] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 4.516239] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 4.516274] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 4.516312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 4.516347] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 4.516381] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 4.516419] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 4.516453] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt [ 4.516488] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 4.516526] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded [ 4.516561] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt [ 4.516595] pcieport 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 4.516629] pcieport 0000:08:01.0: Signaling PME through PCIe PME interrupt [ 4.516663] pcieport 0000:08:04.0: Signaling PME through PCIe PME interrupt [ 4.516697] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt [ 4.516731] pcieport 0000:08:05.0: Signaling PME through PCIe PME interrupt [ 4.516765] pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt [ 4.516798] pcieport 0000:08:06.0: Signaling PME through PCIe PME interrupt [ 4.516832] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt [ 4.516865] pcieport 0000:08:07.0: Signaling PME through PCIe PME interrupt [ 4.516899] pcieport 0000:08:08.0: Signaling PME through PCIe PME interrupt [ 4.516933] pcieport 0000:08:09.0: Signaling PME through PCIe PME interrupt [ 4.516972] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded [ 4.517069] ERST: Table is not found! [ 4.517098] GHES: HEST is not enabled! [ 4.517497] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.538252] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.588744] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.604106] hpet_acpi_add: no address or irqs in _CRS [ 4.604146] Linux agpgart interface v0.103 [ 4.604249] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 4.604418] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 4.605461] agpgart-intel 0000:00:00.0: detected 262144K stolen memory [ 4.605638] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 4.605771] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.608698] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.608735] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.608910] mousedev: PS/2 mouse device common for all mice [ 4.608991] rtc_cmos 00:04: RTC can wake from S4 [ 4.609186] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.609278] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 4.609431] TCP cubic registered [ 4.609502] NET: Registered protocol family 10 [ 4.609809] Mobile IPv6 [ 4.609837] NET: Registered protocol family 17 [ 4.609869] Registering the dns_resolver key type [ 4.610037] PM: Hibernation image not present or could not be loaded. [ 4.610048] registered taskstats version 1 [ 4.611048] rtc_cmos 00:04: setting system clock to 2012-02-22 22:07:20 UTC (1329948440) [ 4.611152] Initializing network drop monitor service [ 4.611383] Freeing unused kernel memory: 568k freed [ 4.611469] Write protecting the kernel read-only data: 6144k [ 4.613428] Freeing unused kernel memory: 712k freed [ 4.613711] Freeing unused kernel memory: 684k freed [ 4.633455] udevd[50]: starting version 175 [ 4.667069] usbcore: registered new interface driver usbfs [ 4.667134] usbcore: registered new interface driver hub [ 4.677044] SCSI subsystem initialized [ 4.679549] usbcore: registered new device driver usb [ 4.680286] xen: registering gsi 17 triggering 0 polarity 1 [ 4.680292] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 4.680331] xen: --> pirq=17 -> irq=17 (gsi=17) [ 4.680333] Already setup the GSI :17 [ 4.680370] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.680441] xhci_hcd 0000:05:00.0: setting latency timer to 64 [ 4.680447] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 4.680503] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1 [ 4.680770] xhci_hcd 0000:05:00.0: irq 17, io mem 0xfbc00000 [ 4.680860] xhci_hcd 0000:05:00.0: Failed to enable MSI-X [ 4.681149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.681189] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.681241] usb usb1: Product: xHCI Host Controller [ 4.681277] usb usb1: Manufacturer: Linux 3.2.0-1-amd64 xhci_hcd [ 4.681315] usb usb1: SerialNumber: 0000:05:00.0 [ 4.685473] xHCI xhci_add_endpoint called for root hub [ 4.685476] xHCI xhci_check_bandwidth called for root hub [ 4.685510] hub 1-0:1.0: USB hub found [ 4.685555] hub 1-0:1.0: 2 ports detected [ 4.685688] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 4.685733] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2 [ 4.685831] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.685874] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.685926] usb usb2: Product: xHCI Host Controller [ 4.685963] usb usb2: Manufacturer: Linux 3.2.0-1-amd64 xhci_hcd [ 4.686001] usb usb2: SerialNumber: 0000:05:00.0 [ 4.688319] xHCI xhci_add_endpoint called for root hub [ 4.688322] xHCI xhci_check_bandwidth called for root hub [ 4.688356] hub 2-0:1.0: USB hub found [ 4.688399] hub 2-0:1.0: 2 ports detected [ 4.700516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.700583] xen: registering gsi 16 triggering 0 polarity 1 [ 4.700589] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.700628] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.700631] Already setup the GSI :16 [ 4.700667] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.700728] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.700734] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 4.700780] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.700882] ehci_hcd 0000:00:1a.0: debug port 2 [ 4.704823] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 4.705255] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf03000 [ 4.707953] xen: registering gsi 18 triggering 0 polarity 1 [ 4.707957] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 4.708026] xen: --> pirq=18 -> irq=18 (gsi=18) [ 4.708028] Already setup the GSI :18 [ 4.708097] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.708203] xhci_hcd 0000:06:00.0: setting latency timer to 64 [ 4.708209] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 4.708281] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4 [ 4.708609] xhci_hcd 0000:06:00.0: irq 18, io mem 0xfbb00000 [ 4.708740] xhci_hcd 0000:06:00.0: Failed to enable MSI-X [ 4.709088] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.709162] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.709221] usb usb4: Product: xHCI Host Controller [ 4.709258] usb usb4: Manufacturer: Linux 3.2.0-1-amd64 xhci_hcd [ 4.709295] usb usb4: SerialNumber: 0000:06:00.0 [ 4.709416] xHCI xhci_add_endpoint called for root hub [ 4.709419] xHCI xhci_check_bandwidth called for root hub [ 4.709453] hub 4-0:1.0: USB hub found [ 4.709496] hub 4-0:1.0: 2 ports detected [ 4.709608] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 4.709651] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5 [ 4.709728] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.709768] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.709819] usb usb5: Product: xHCI Host Controller [ 4.709855] usb usb5: Manufacturer: Linux 3.2.0-1-amd64 xhci_hcd [ 4.709893] usb usb5: SerialNumber: 0000:06:00.0 [ 4.710032] libata version 3.00 loaded. [ 4.710137] xHCI xhci_add_endpoint called for root hub [ 4.710140] xHCI xhci_check_bandwidth called for root hub [ 4.710171] hub 5-0:1.0: USB hub found [ 4.710214] hub 5-0:1.0: 2 ports detected [ 4.727906] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.727977] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.728022] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.728077] usb usb3: Product: EHCI Host Controller [ 4.728115] usb usb3: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd [ 4.728154] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.728335] hub 3-0:1.0: USB hub found [ 4.728374] hub 3-0:1.0: 2 ports detected [ 4.728504] ahci 0000:00:1f.2: version 3.0 [ 4.728519] xen: registering gsi 19 triggering 0 polarity 1 [ 4.728527] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 4.728573] xen: --> pirq=19 -> irq=19 (gsi=19) [ 4.728576] Already setup the GSI :19 [ 4.728613] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.741581] tg3.c:v3.121 (November 2, 2011) [ 4.741632] xen: registering gsi 17 triggering 0 polarity 1 [ 4.741636] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 4.741674] xen: --> pirq=17 -> irq=17 (gsi=17) [ 4.741676] Already setup the GSI :17 [ 4.741711] tg3 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.741762] tg3 0000:0d:00.0: setting latency timer to 64 [ 4.743920] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 4.745278] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 4.745338] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.749960] xen: registering gsi 16 triggering 0 polarity 1 [ 4.749965] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.750003] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.750005] Already setup the GSI :16 [ 4.750041] firewire_ohci 0000:0c:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.750102] firewire_ohci 0000:0c:00.0: setting latency timer to 64 [ 4.769292] tg3 0000:0d:00.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address 00:25:22:f6:b9:2e [ 4.769364] tg3 0000:0d:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 4.769421] tg3 0000:0d:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 4.769479] tg3 0000:0d:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 4.784554] scsi0 : ahci [ 4.784684] scsi1 : ahci [ 4.784788] scsi2 : ahci [ 4.784892] scsi3 : ahci [ 4.785011] scsi4 : ahci [ 4.785117] scsi5 : ahci [ 4.785341] ata1: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01100 irq 300 [ 4.785390] ata2: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01180 irq 300 [ 4.785437] ata3: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01200 irq 300 [ 4.785485] ata4: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01280 irq 300 [ 4.785533] ata5: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01300 irq 300 [ 4.785580] ata6: SATA max UDMA/133 abar m2048@0xfbf01000 port 0xfbf01380 irq 300 [ 4.785655] xen: registering gsi 16 triggering 0 polarity 1 [ 4.785659] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 4.785700] xen: --> pirq=16 -> irq=16 (gsi=16) [ 4.785702] Already setup the GSI :16 [ 4.785740] ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.785992] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.786040] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.786093] ahci 0000:04:00.0: setting latency timer to 64 [ 4.786383] xen: registering gsi 23 triggering 0 polarity 1 [ 4.786392] xen: --> pirq=23 -> irq=23 (gsi=23) [ 4.786406] scsi6 : ahci [ 4.786412] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.786436] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.786441] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 4.786453] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.786512] ehci_hcd 0000:00:1d.0: debug port 2 [ 4.786834] scsi7 : ahci [ 4.786943] ata7: SATA max UDMA/133 abar m2048@0xfbd10000 port 0xfbd10100 irq 301 [ 4.787040] ata8: SATA max UDMA/133 abar m2048@0xfbd10000 port 0xfbd10180 irq 301 [ 4.790391] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 4.790431] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf02000 [ 4.803892] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.803966] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.804001] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.804046] usb usb6: Product: EHCI Host Controller [ 4.804077] usb usb6: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd [ 4.804110] usb usb6: SerialNumber: 0000:00:1d.0 [ 4.804244] hub 6-0:1.0: USB hub found [ 4.804281] hub 6-0:1.0: 2 ports detected [ 4.811961] firewire_ohci: Added fw-ohci device 0000:0c:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 4.995942] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 5.013196] usb 1-2: New USB device found, idVendor=0409, idProduct=005a [ 5.013254] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.013480] hub 1-2:1.0: USB hub found [ 5.013682] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep [ 5.013816] hub 1-2:1.0: 4 ports detected [ 5.103904] ata3: SATA link down (SStatus 0 SControl 300) [ 5.103992] ata6: SATA link down (SStatus 0 SControl 300) [ 5.104006] ata7: SATA link down (SStatus 0 SControl 330) [ 5.104055] ata8: SATA link down (SStatus 0 SControl 330) [ 5.104170] ata1: SATA link down (SStatus 0 SControl 300) [ 5.104230] ata5: SATA link down (SStatus 0 SControl 300) [ 5.111910] ata4: SATA link down (SStatus 0 SControl 300) [ 5.111994] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.112304] ata2.00: ATA-8: INTEL SSDSC2MH120A2, PPG4, max UDMA/133 [ 5.112355] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.112703] ata2.00: configured for UDMA/133 [ 5.112854] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2MH12 PPG4 PQ: 0 ANSI: 5 [ 5.116782] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 5.116959] sd 1:0:0:0: [sda] Write Protect is off [ 5.116991] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.117026] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.119070] sda: sda1 sda2 sda3 [ 5.119480] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.123887] usb 3-1: new high-speed USB device number 2 using ehci_hcd [ 5.256235] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.256294] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.256535] hub 3-1:1.0: USB hub found [ 5.256736] hub 3-1:1.0: 6 ports detected [ 5.312243] firewire_core: created device fw0: GUID 008f13005d650f00, S400 [ 5.367904] usb 6-1: new high-speed USB device number 2 using ehci_hcd [ 5.385866] device-mapper: uevent: version 1.0.3 [ 5.385976] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 5.500225] usb 6-1: New USB device found, idVendor=8087, idProduct=0024 [ 5.500230] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.500512] hub 6-1:1.0: USB hub found [ 5.500595] hub 6-1:1.0: 8 ports detected [ 5.571977] usb 3-1.4: new high-speed USB device number 3 using ehci_hcd [ 5.664723] usb 3-1.4: New USB device found, idVendor=0781, idProduct=5567 [ 5.664727] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.664731] usb 3-1.4: Product: Cruzer Blade [ 5.664734] usb 3-1.4: Manufacturer: SanDisk [ 5.664736] usb 3-1.4: SerialNumber: 200515358218B5A33CBE [ 5.667062] usbcore: registered new interface driver uas [ 5.667771] Initializing USB Mass Storage driver... [ 5.667888] scsi8 : usb-storage 3-1.4:1.0 [ 5.667984] usbcore: registered new interface driver usb-storage [ 5.667987] USB Mass Storage support registered. [ 5.771967] usb 6-1.1: new low-speed USB device number 3 using ehci_hcd [ 5.882115] usb 6-1.1: New USB device found, idVendor=04d9, idProduct=2221 [ 5.882119] usb 6-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.882123] usb 6-1.1: Product: USB Keyboard [ 5.895533] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/input/input0 [ 5.895604] generic-usb 0003:04D9:2221.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:1d.0-1.1/input0 [ 5.918636] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/input/input1 [ 5.918708] generic-usb 0003:04D9:2221.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:1d.0-1.1/input1 [ 5.918724] usbcore: registered new interface driver usbhid [ 5.918726] usbhid: USB HID core driver [ 5.951991] usb 6-1.2: new full-speed USB device number 4 using ehci_hcd [ 6.046357] usb 6-1.2: New USB device found, idVendor=1532, idProduct=0015 [ 6.046362] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.046366] usb 6-1.2: Product: Razer Naga [ 6.046368] usb 6-1.2: Manufacturer: Razer [ 6.092630] input: Razer Razer Naga as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input2 [ 6.092754] generic-usb 0003:1532:0015.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Naga] on usb-0000:00:1d.0-1.2/input0 [ 6.093815] input: Razer Razer Naga as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/input/input3 [ 6.093934] generic-usb 0003:1532:0015.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Naga] on usb-0000:00:1d.0-1.2/input1 [ 6.668637] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2 [ 6.669976] sd 8:0:0:0: [sdb] 31250432 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 6.670723] sd 8:0:0:0: [sdb] Write Protect is off [ 6.670726] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 6.671739] sd 8:0:0:0: [sdb] No Caching mode page present [ 6.671744] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 6.674607] sd 8:0:0:0: [sdb] No Caching mode page present [ 6.674611] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 6.675373] sdb: sdb1 [ 6.678219] sd 8:0:0:0: [sdb] No Caching mode page present [ 6.678222] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 6.678225] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 11.696918] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 11.700976] alg: No test for __cbc-aes-aesni (cryptd(__driver-cbc-aes-aesni)) [ 12.281553] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 12.519103] udevd[383]: starting version 175 [ 12.613820] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 12.613887] ACPI: Power Button [PWRB] [ 12.613971] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 12.614025] ACPI: Power Button [PWRF] [ 12.642090] wmi: Mapper loaded [ 12.690035] [drm] Initialized drm 1.1.0 20060810 [ 12.704079] xen: registering gsi 16 triggering 0 polarity 1 [ 12.704085] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 12.704124] xen: --> pirq=16 -> irq=16 (gsi=16) [ 12.704126] Already setup the GSI :16 [ 12.704162] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.704206] i915 0000:00:02.0: setting latency timer to 64 [ 12.708839] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 12.787608] iTCO_vendor_support: vendor-support=0 [ 12.789901] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 12.790584] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 12.790709] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 12.790826] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.840046] xen: registering gsi 17 triggering 0 polarity 1 [ 12.840052] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 12.840094] xen: --> pirq=17 -> irq=17 (gsi=17) [ 12.840096] Already setup the GSI :17 [ 12.840133] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 12.840341] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 12.859279] [drm] MTRR allocation failed. Graphics performance may suffer. [ 12.860494] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 12.860534] [drm] Driver supports precise vblank timestamp query. [ 12.860655] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 12.860711] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 [ 12.862947] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 12.863090] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7 [ 13.612276] fbcon: inteldrmfb (fb0) is primary device [ 13.963639] Console: switching to colour frame buffer device 240x67 [ 13.968804] fb0: inteldrmfb frame buffer device [ 13.968805] drm: registered panic notifier [ 13.968862] No ACPI video bus found [ 13.968947] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 13.969118] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.969148] xen: registering gsi 18 triggering 0 polarity 1 [ 13.969153] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 13.969155] xen: --> pirq=18 -> irq=18 (gsi=18) [ 13.969158] Already setup the GSI :18 [ 13.969162] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 13.989840] xen: registering gsi 16 triggering 0 polarity 1 [ 13.989845] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 13.989884] xen: --> pirq=16 -> irq=16 (gsi=16) [ 13.989886] Already setup the GSI :16 [ 13.989913] snd_virtuoso 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.402645] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 15.427729] EXT4-fs (dm-1): re-mounted. Opts: user_xattr,errors=remount-ro [ 15.545909] loop: module loaded [ 15.897001] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 16.013167] Bridge firewalling registered [ 16.018223] device eth0 entered promiscuous mode [ 16.175369] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.179561] ADDRCONF(NETDEV_UP): br0: link is not ready [ 19.521036] tg3 0000:0d:00.0: eth0: Link is up at 1000 Mbps, full duplex [ 19.522594] tg3 0000:0d:00.0: eth0: Flow control is on for TX and on for RX [ 19.524132] tg3 0000:0d:00.0: eth0: EEE is disabled [ 19.526044] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.527574] br0: topology change detected, propagating [ 19.529089] br0: port 1(eth0) entering forwarding state [ 19.530602] br0: port 1(eth0) entering forwarding state [ 19.532428] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 22.386565] RPC: Registered named UNIX socket transport module. [ 22.388019] RPC: Registered udp transport module. [ 22.389468] RPC: Registered tcp transport module. [ 22.390908] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 22.398140] FS-Cache: Loaded [ 22.407133] FS-Cache: Netfs 'nfs' registered for caching [ 22.414252] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 23.390335] fuse init (API version 7.17) [ 24.114152] Bluetooth: Core ver 2.16 [ 24.114172] NET: Registered protocol family 31 [ 24.114173] Bluetooth: HCI device and connection manager initialized [ 24.114175] Bluetooth: HCI socket layer initialized [ 24.114176] Bluetooth: L2CAP socket layer initialized [ 24.114434] Bluetooth: SCO socket layer initialized [ 24.120979] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.120981] Bluetooth: BNEP filters: protocol multicast [ 24.560458] Bluetooth: RFCOMM TTY layer initialized [ 24.560463] Bluetooth: RFCOMM socket layer initialized [ 24.560464] Bluetooth: RFCOMM ver 1.11 [ 26.160701] Event-channel device installed. [ 26.197393] XENBUS: Unable to read cpu state [ 26.197535] XENBUS: Unable to read cpu state [ 26.907888] [drm:intel_disable_transcoder] *ERROR* failed to disable transcoder 1 [ 49.674327] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 80.418891] WARNING! power/level is deprecated; use power/control instead [ 80.496088] usb 3-1.4: USB disconnect, device number 3