[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38+xendbg8 SMP Thu May 3 17:40:06 UTC 2012 (Ubuntu 3.2.0-24.38+xendbg8-generic 3.2.16) [ 0.000000] Command line: placeholder root=/dev/mapper/rootvg-magrathea ro nomodeset debug lapic=debug console=hvc0 loglevel=10 earlyprintk=xenboot [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Freeing 97-100 pfn range: 105 pages freed [ 0.000000] 1-1 mapping on 97->100 [ 0.000000] 1-1 mapping on dfee0->100000 [ 0.000000] Released 105 pages of unused memory [ 0.000000] Set 131465 page(s) to 1-1 mapping [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000000097000 (usable) [ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] Xen: 00000000dfee0000 - 00000000dfee1000 (ACPI NVS) [ 0.000000] Xen: 00000000dfee1000 - 00000000dfef0000 (ACPI data) [ 0.000000] Xen: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 0000000180120000 (usable) [ 0.000000] Xen: 0000000180120000 - 0000000220000000 (unusable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EX58-UD3R/EX58-UD3R, BIOS F11 03/11/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x180120 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5cc0] f5cc0 [ 0.000000] initial memory mapped : 0 - 047e7000 [ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] 0000000000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 8fb000-1000000 [ 0.000000] xen: setting RW the range fd4000 - 1000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000180120000 [ 0.000000] 0100000000 - 0180120000 page 4k [ 0.000000] kernel direct mapping tables up to 180120000 @ 1f3f7000-20000000 [ 0.000000] xen: setting RW the range 1f7fb000 - 20000000 [ 0.000000] RAMDISK: 02060000 - 047e7000 [ 0.000000] ACPI: RSDP 00000000000f7680 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfee1040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfee1180 04BA7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: HPET 00000000dfee5f00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfee5f80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000dfee5fc0 00470 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000dfee6430 00B72 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000dfee5d80 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000dfee6fb0 02FE4 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] xxx xen_apic_read(0x20) -> 0x0 [ 0.000000] xxx xen_get_apic_id(0x0) -> 0x0 [ 0.000000] xxx xen_apic_read(0x30) -> 0x10 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000180120000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000180120000 [ 0.000000] NODE_DATA [000000001fffb000 - 000000001fffffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00180120 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000097 [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00180120 [ 0.000000] On node 0 totalpages: 1441671 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1758 pages reserved [ 0.000000] DMA zone: 2153 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31 [ 0.000000] Normal zone: 8197 pages used for memmap [ 0.000000] Normal zone: 516379 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] xxx xen_apic_read(0x20) -> 0x0 [ 0.000000] xxx xen_get_apic_id(0x0) -> 0x0 [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee1000 [ 0.000000] PM: Registered nosave memory: 00000000dfee1000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.2 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fdeb000 s83072 r8192 d23424 u114688 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 2.348911] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1415332 [ 2.348914] Policy zone: Normal [ 2.348917] Kernel command line: placeholder root=/dev/mapper/rootvg-magrathea ro nomodeset debug lapic=debug console=hvc0 loglevel=10 earlyprintk=xenboot [ 2.349396] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 2.378521] Placing 64MB software IO TLB between ffff880015400000 - ffff880019400000 [ 2.378525] software IO TLB at phys 0x15400000 - 0x19400000 [ 2.379958] Memory: 294916k/6292608k available (6654k kernel code, 525924k absent, 5471768k reserved, 6550k data, 920k init) [ 2.380035] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 2.380070] Hierarchical RCU implementation. [ 2.380072] RCU dyntick-idle grace-period acceleration is enabled. [ 2.380083] NR_IRQS:16640 nr_irqs:4096 16 [ 2.380142] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 2.380145] xen: registering gsi 9 triggering 0 polarity 0 [ 2.380154] xen: --> pirq=9 -> irq=9 (gsi=9) [ 2.380159] xen: acpi sci 9 [ 2.380162] xen: --> pirq=1 -> irq=1 (gsi=1) [ 2.380166] xen: --> pirq=2 -> irq=2 (gsi=2) [ 2.380169] xen: --> pirq=3 -> irq=3 (gsi=3) [ 2.380173] xen: --> pirq=4 -> irq=4 (gsi=4) [ 2.380176] xen: --> pirq=5 -> irq=5 (gsi=5) [ 2.380179] xen: --> pirq=6 -> irq=6 (gsi=6) [ 2.380182] xen: --> pirq=7 -> irq=7 (gsi=7) [ 2.380186] xen: --> pirq=8 -> irq=8 (gsi=8) [ 2.380188] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 2.380190] xen: --> pirq=9 -> irq=9 (gsi=9) [ 2.380193] xen: --> pirq=10 -> irq=10 (gsi=10) [ 2.380197] xen: --> pirq=11 -> irq=11 (gsi=11) [ 2.380200] xen: --> pirq=12 -> irq=12 (gsi=12) [ 2.380204] xen: --> pirq=13 -> irq=13 (gsi=13) [ 2.380207] xen: --> pirq=14 -> irq=14 (gsi=14) [ 2.380210] xen: --> pirq=15 -> irq=15 (gsi=15) [ 2.382007] Console: colour VGA+ 80x25 [ 2.382011] console [hvc0] enabled, bootconsole disabled [ 2.390775] allocated 47185920 bytes of page_cgroup [ 2.390779] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 2.390818] Xen: using vcpuop timer interface [ 2.390825] installing Xen timer for CPU 0 [ 2.390854] Detected 2664.850 MHz processor. [ 2.390861] Calibrating delay loop (skipped), value calculated using timer frequency.. 5329.70 BogoMIPS (lpj=10659400) [ 2.390866] pid_max: default: 32768 minimum: 301 [ 2.390896] Security Framework initialized [ 2.390906] AppArmor: AppArmor initialized [ 2.390908] Yama: becoming mindful. [ 2.393465] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 2.395968] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.396755] Mount-cache hash table entries: 256 [ 2.396908] Initializing cgroup subsys cpuacct [ 2.396914] Initializing cgroup subsys memory [ 2.396926] Initializing cgroup subsys devices [ 2.396929] Initializing cgroup subsys freezer [ 2.396932] Initializing cgroup subsys blkio [ 2.396943] Initializing cgroup subsys perf_event [ 2.396999] CPU: Physical Processor ID: 0 [ 2.397001] CPU: Processor Core ID: 0 [ 2.399115] ACPI: Core revision 20110623 [ 2.408066] ftrace: allocating 27104 entries in 107 pages [ 2.414834] cpu 0 spinlock event irq 273 [ 2.414887] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. [ 2.415004] NMI watchdog disabled (cpu0): hardware events not enabled [ 2.415078] installing Xen timer for CPU 1 [ 2.415089] cpu 1 spinlock event irq 279 [ 2.415214] NMI watchdog disabled (cpu1): hardware events not enabled [ 2.415291] installing Xen timer for CPU 2 [ 2.415302] cpu 2 spinlock event irq 285 [ 2.415386] NMI watchdog disabled (cpu2): hardware events not enabled [ 2.415455] installing Xen timer for CPU 3 [ 2.415466] cpu 3 spinlock event irq 291 [ 2.415545] NMI watchdog disabled (cpu3): hardware events not enabled [ 2.415617] installing Xen timer for CPU 4 [ 2.415627] cpu 4 spinlock event irq 297 [ 2.415712] NMI watchdog disabled (cpu4): hardware events not enabled [ 2.415786] installing Xen timer for CPU 5 [ 2.415797] cpu 5 spinlock event irq 303 [ 2.415880] NMI watchdog disabled (cpu5): hardware events not enabled [ 2.415950] installing Xen timer for CPU 6 [ 2.415960] cpu 6 spinlock event irq 309 [ 2.416047] NMI watchdog disabled (cpu6): hardware events not enabled [ 2.416118] installing Xen timer for CPU 7 [ 2.416131] cpu 7 spinlock event irq 315 [ 2.416213] NMI watchdog disabled (cpu7): hardware events not enabled [ 2.416234] Brought up 8 CPUs [ 2.416605] devtmpfs: initialized [ 2.417654] EVM: security.selinux [ 2.417657] EVM: security.SMACK64 [ 2.417659] EVM: security.capability [ 2.417704] PM: Registering ACPI NVS region at dfee0000 (4096 bytes) [ 2.418293] Grant table initialized [ 2.418336] print_constraints: dummy: [ 2.418372] RTC time: 9:37:06, date: 05/04/12 [ 2.418401] NET: Registered protocol family 16 [ 2.418497] Trying to unpack rootfs image as initramfs... [ 2.423099] ACPI: bus type pci registered [ 2.423174] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 2.423178] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 2.440460] PCI: Using configuration type 1 for base access [ 2.441457] bio: create slab at 0 [ 2.441567] ACPI: Added _OSI(Module Device) [ 2.441570] ACPI: Added _OSI(Processor Device) [ 2.441573] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.441576] ACPI: Added _OSI(Processor Aggregator Device) [ 2.443539] ACPI: EC: Look up EC in DSDT [ 2.451390] ACPI Warning: Incorrect checksum in table [TAMG] - 0x0C, should be 0x0B (20110623/tbutils-314) [ 2.454463] ACPI: Interpreter enabled [ 2.454468] ACPI: (supports S0 S3 S4 S5) [ 2.454494] ACPI: Using IOAPIC for interrupt routing [ 2.458582] Freeing initrd memory: 40476k freed [ 2.461357] ACPI: No dock devices found. [ 2.461362] HEST: Table not found. [ 2.461366] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.461499] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 2.461744] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 2.461748] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 2.461751] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 2.461754] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 2.461758] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] [ 2.461784] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600 [ 2.461890] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 2.461896] pci 0000:00:00.0: PME# disabled [ 2.461939] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 2.462052] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.462058] pci 0000:00:01.0: PME# disabled [ 2.462101] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 2.462214] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.462220] pci 0000:00:03.0: PME# disabled [ 2.462266] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 2.462378] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 2.462384] pci 0000:00:07.0: PME# disabled [ 2.462430] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800 [ 2.462559] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800 [ 2.462672] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800 [ 2.462802] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800 [ 2.462917] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 2.462939] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff] [ 2.463037] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 2.463043] pci 0000:00:13.0: PME# disabled [ 2.463078] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 2.463209] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 2.463342] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 2.463476] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800 [ 2.463596] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 2.463672] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 2.463761] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 2.463836] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 2.463928] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 2.464000] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 2.464113] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 2.464148] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 2.464305] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 2.464312] pci 0000:00:1a.7: PME# disabled [ 2.464357] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 2.464384] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit] [ 2.464508] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.464515] pci 0000:00:1b.0: PME# disabled [ 2.464549] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 2.464677] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.464683] pci 0000:00:1c.0: PME# disabled [ 2.464721] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604 [ 2.464849] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.464855] pci 0000:00:1c.1: PME# disabled [ 2.464897] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 2.465026] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.465032] pci 0000:00:1c.4: PME# disabled [ 2.465074] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 2.465149] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 2.465238] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 2.465313] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 2.465402] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 2.465477] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 2.465582] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 2.465617] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff] [ 2.465771] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.465779] pci 0000:00:1d.7: PME# disabled [ 2.465815] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 2.465928] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 2.466059] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 2.466064] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 2.466147] pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104 [ 2.466182] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907] [ 2.466196] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803] [ 2.466211] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707] [ 2.466225] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603] [ 2.466239] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f] [ 2.466253] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff] [ 2.466340] pci 0000:00:1f.2: PME# supported from D3hot [ 2.466346] pci 0000:00:1f.2: PME# disabled [ 2.466375] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 2.466402] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit] [ 2.466441] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 2.466557] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 2.466656] pci 0000:02:00.0: [10de:05e1] type 0 class 0x000300 [ 2.466676] pci 0000:02:00.0: reg 10: [mem 0xf8000000-0xf8ffffff] [ 2.466696] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 2.466717] pci 0000:02:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit] [ 2.466730] pci 0000:02:00.0: reg 24: [io 0xef00-0xef7f] [ 2.466744] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 2.472216] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 2.472227] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 2.472237] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 2.472251] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 2.472331] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 2.472414] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 2.472521] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101 [ 2.472649] pci 0000:05:00.0: reg 24: [mem 0xfbefe000-0xfbefffff] [ 2.472741] pci 0000:05:00.0: PME# supported from D3hot [ 2.472749] pci 0000:05:00.0: PME# disabled [ 2.472789] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101 [ 2.472824] pci 0000:05:00.1: reg 10: [io 0xdf00-0xdf07] [ 2.472845] pci 0000:05:00.1: reg 14: [io 0xde00-0xde03] [ 2.472864] pci 0000:05:00.1: reg 18: [io 0xdd00-0xdd07] [ 2.472884] pci 0000:05:00.1: reg 1c: [io 0xdc00-0xdc03] [ 2.472904] pci 0000:05:00.1: reg 20: [io 0xdb00-0xdb0f] [ 2.473025] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.473045] pci 0000:00:1c.1: PCI bridge to [bus 05-05] [ 2.473051] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 2.473057] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.473161] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200 [ 2.473185] pci 0000:06:00.0: reg 10: [io 0xce00-0xceff] [ 2.473228] pci 0000:06:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit pref] [ 2.473256] pci 0000:06:00.0: reg 20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref] [ 2.473274] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 2.473374] pci 0000:06:00.0: supports D1 D2 [ 2.473376] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.473384] pci 0000:06:00.0: PME# disabled [ 2.480327] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 2.480338] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 2.480348] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 2.480363] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 2.480446] pci 0000:07:06.0: [104c:8024] type 0 class 0x000c00 [ 2.480475] pci 0000:07:06.0: reg 10: [mem 0xfbdff000-0xfbdff7ff] [ 2.480491] pci 0000:07:06.0: reg 14: [mem 0xfbdf8000-0xfbdfbfff] [ 2.480606] pci 0000:07:06.0: supports D1 D2 [ 2.480608] pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot [ 2.480615] pci 0000:07:06.0: PME# disabled [ 2.480674] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) [ 2.480684] pci 0000:00:1e.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.480694] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.480698] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.480701] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.480705] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 2.480708] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 2.480766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.481021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 2.481077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 2.481158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 2.481215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 2.481382] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 2.481387] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 2.481390] ACPI _OSC control for PCIe not granted, disabling ASPM [ 2.511626] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 2.511725] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 2.511822] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 2.511918] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 2.512015] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 2.512113] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 2.512210] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 2.512306] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 2.512365] xen/balloon: Initialising balloon driver. [ 2.528500] xen-balloon: Initialising balloon driver. [ 2.528525] xen/balloon: Xen selfballooning driver disabled for domain0. [ 2.528652] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.528658] vgaarb: loaded [ 2.528659] vgaarb: bridge control possible 0000:02:00.0 [ 2.528742] i2c-core: driver [aat2870] using legacy suspend method [ 2.528745] i2c-core: driver [aat2870] using legacy resume method [ 2.528802] SCSI subsystem initialized [ 2.528882] libata version 3.00 loaded. [ 2.528927] usbcore: registered new interface driver usbfs [ 2.528939] usbcore: registered new interface driver hub [ 2.528981] usbcore: registered new device driver usb [ 2.529085] PCI: Using ACPI for IRQ routing [ 2.531669] PCI: Discovered peer bus 3f [ 2.531705] pci 0000:3f:00.0: [8086:2c41] type 0 class 0x000600 [ 2.531765] pci 0000:3f:00.1: [8086:2c01] type 0 class 0x000600 [ 2.531826] pci 0000:3f:02.0: [8086:2c10] type 0 class 0x000600 [ 2.531878] pci 0000:3f:02.1: [8086:2c11] type 0 class 0x000600 [ 2.531936] pci 0000:3f:03.0: [8086:2c18] type 0 class 0x000600 [ 2.531990] pci 0000:3f:03.1: [8086:2c19] type 0 class 0x000600 [ 2.532044] pci 0000:3f:03.4: [8086:2c1c] type 0 class 0x000600 [ 2.532100] pci 0000:3f:04.0: [8086:2c20] type 0 class 0x000600 [ 2.532152] pci 0000:3f:04.1: [8086:2c21] type 0 class 0x000600 [ 2.532203] pci 0000:3f:04.2: [8086:2c22] type 0 class 0x000600 [ 2.532255] pci 0000:3f:04.3: [8086:2c23] type 0 class 0x000600 [ 2.532312] pci 0000:3f:05.0: [8086:2c28] type 0 class 0x000600 [ 2.532364] pci 0000:3f:05.1: [8086:2c29] type 0 class 0x000600 [ 2.532417] pci 0000:3f:05.2: [8086:2c2a] type 0 class 0x000600 [ 2.532470] pci 0000:3f:05.3: [8086:2c2b] type 0 class 0x000600 [ 2.532527] pci 0000:3f:06.0: [8086:2c30] type 0 class 0x000600 [ 2.532579] pci 0000:3f:06.1: [8086:2c31] type 0 class 0x000600 [ 2.532631] pci 0000:3f:06.2: [8086:2c32] type 0 class 0x000600 [ 2.532683] pci 0000:3f:06.3: [8086:2c33] type 0 class 0x000600 [ 2.533181] PCI: pci_cache_line_size set to 64 bytes [ 2.533395] reserve RAM buffer: 0000000000097000 - 000000000009ffff [ 2.533399] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff [ 2.533402] reserve RAM buffer: 0000000180120000 - 0000000183ffffff [ 2.533484] NetLabel: Initializing [ 2.533487] NetLabel: domain hash size = 128 [ 2.533489] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.533498] NetLabel: unlabeled traffic allowed by default [ 2.533578] Switching to clocksource xen [ 2.539394] AppArmor: AppArmor Filesystem Enabled [ 2.539411] pnp: PnP ACPI init [ 2.539420] ACPI: bus type pnp registered [ 2.539581] pnp 00:00: [bus 00-3f] [ 2.539585] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.539587] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.539590] pnp 00:00: [io 0x0d00-0xffff window] [ 2.539593] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.539596] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 2.539598] pnp 00:00: [mem 0xdff00000-0xfebfffff window] [ 2.539673] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 2.539822] pnp 00:01: [io 0x0010-0x001f] [ 2.539825] pnp 00:01: [io 0x0022-0x003f] [ 2.539827] pnp 00:01: [io 0x0044-0x005f] [ 2.539830] pnp 00:01: [io 0x0062-0x0063] [ 2.539832] pnp 00:01: [io 0x0065-0x006f] [ 2.539834] pnp 00:01: [io 0x0074-0x007f] [ 2.539837] pnp 00:01: [io 0x0091-0x0093] [ 2.539839] pnp 00:01: [io 0x00a2-0x00bf] [ 2.539841] pnp 00:01: [io 0x00e0-0x00ef] [ 2.539844] pnp 00:01: [io 0x04d0-0x04d1] [ 2.539846] pnp 00:01: [io 0x0290-0x029f] [ 2.539848] pnp 00:01: [io 0x0800-0x087f] [ 2.539850] pnp 00:01: [io 0x0290-0x0294] [ 2.539853] pnp 00:01: [io 0x0880-0x088f] [ 2.539927] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 2.539930] system 00:01: [io 0x0290-0x029f] has been reserved [ 2.539934] system 00:01: [io 0x0800-0x087f] has been reserved [ 2.539937] system 00:01: [io 0x0290-0x0294] has been reserved [ 2.539940] system 00:01: [io 0x0880-0x088f] has been reserved [ 2.539944] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.539964] pnp 00:02: [dma 4] [ 2.539966] pnp 00:02: [io 0x0000-0x000f] [ 2.539968] pnp 00:02: [io 0x0080-0x0090] [ 2.539971] pnp 00:02: [io 0x0094-0x009f] [ 2.539973] pnp 00:02: [io 0x00c0-0x00df] [ 2.540007] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.540105] pnp 00:03: [irq 0 disabled] [ 2.540109] xen: registering gsi 8 triggering 1 polarity 0 [ 2.540114] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 2.540116] xen: --> pirq=8 -> irq=8 (gsi=8) [ 2.540123] pnp 00:03: [irq 8] [ 2.540125] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 2.540166] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.540220] pnp 00:04: [io 0x0070-0x0073] [ 2.540260] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.540276] pnp 00:05: [io 0x0061] [ 2.540313] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.540327] pnp 00:06: [io 0x00f0-0x00ff] [ 2.540330] xen: registering gsi 13 triggering 1 polarity 0 [ 2.540334] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 2.540336] xen: --> pirq=13 -> irq=13 (gsi=13) [ 2.540341] pnp 00:06: [irq 13] [ 2.540380] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.540755] pnp 00:07: [io 0x0400-0x04cf] [ 2.540758] pnp 00:07: [io 0x04d2-0x04ff] [ 2.540828] system 00:07: [io 0x0400-0x04cf] has been reserved [ 2.540832] system 00:07: [io 0x04d2-0x04ff] has been reserved [ 2.540836] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.541231] pnp 00:08: [mem 0xf0000000-0xf3ffffff] [ 2.541316] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 2.541320] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.541752] pnp 00:09: [mem 0x000d5200-0x000d7fff] [ 2.541756] pnp 00:09: [mem 0x000f0000-0x000f7fff] [ 2.541758] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 2.541761] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 2.541764] pnp 00:09: [mem 0xdfee0000-0xdfefffff] [ 2.541766] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 2.541769] pnp 00:09: [mem 0x00100000-0xdfedffff] [ 2.541771] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 2.541774] pnp 00:09: [mem 0xfed10000-0xfed1dfff] [ 2.541776] pnp 00:09: [mem 0xfed20000-0xfed8ffff] [ 2.541779] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 2.541781] pnp 00:09: [mem 0xffb00000-0xffb7ffff] [ 2.541784] pnp 00:09: [mem 0xfff00000-0xffffffff] [ 2.541786] pnp 00:09: [mem 0x000e0000-0x000effff] [ 2.541878] system 00:09: [mem 0x000d5200-0x000d7fff] could not be reserved [ 2.541881] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved [ 2.541885] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved [ 2.541888] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved [ 2.541891] system 00:09: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 2.541894] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.541897] system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved [ 2.541901] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.541904] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved [ 2.541907] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved [ 2.541910] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 2.541914] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved [ 2.541917] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 2.541920] system 00:09: [mem 0x000e0000-0x000effff] could not be reserved [ 2.541924] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.541960] pnp 00:0a: [mem 0xffb80000-0xffbfffff] [ 2.542018] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 2.542028] pnp: PnP ACPI: found 11 devices [ 2.542030] ACPI: ACPI bus type pnp unregistered [ 2.548697] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 2.548723] PCI: max bus depth: 1 pci_try_num: 2 [ 2.548819] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref] [ 2.548824] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4200000-0xf43fffff] [ 2.548827] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref] [ 2.548832] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.548835] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 2.548852] pci 0000:02:00.0: BAR 6: assigned [mem 0xf9000000-0xf907ffff pref] [ 2.548855] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 2.548860] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 2.548867] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff] [ 2.548873] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 2.548882] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 2.548897] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 2.548902] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 2.548910] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff] [ 2.548916] pci 0000:00:1c.0: bridge window [mem 0xf4400000-0xf45fffff 64bit pref] [ 2.548926] pci 0000:00:1c.1: PCI bridge to [bus 05-05] [ 2.548930] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 2.548938] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] [ 2.548944] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf41fffff 64bit pref] [ 2.548955] pci 0000:06:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref] [ 2.548958] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 2.548962] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 2.548970] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 2.548976] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 2.548986] pci 0000:00:1e.0: PCI bridge to [bus 07-07] [ 2.548993] pci 0000:00:1e.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 2.549012] xen: registering gsi 16 triggering 0 polarity 1 [ 2.549023] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.549028] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.549036] pci 0000:00:01.0: setting latency timer to 64 [ 2.549044] xen: registering gsi 16 triggering 0 polarity 1 [ 2.549047] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 2.549050] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.549052] Already setup the GSI :16 [ 2.549055] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.549061] pci 0000:00:03.0: setting latency timer to 64 [ 2.549068] xen: registering gsi 16 triggering 0 polarity 1 [ 2.549071] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 2.549074] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.549076] Already setup the GSI :16 [ 2.549079] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.549086] pci 0000:00:07.0: setting latency timer to 64 [ 2.549096] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 2.549100] xen: registering gsi 16 triggering 0 polarity 1 [ 2.549103] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 2.549106] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.549108] Already setup the GSI :16 [ 2.549111] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.549119] pci 0000:00:1c.0: setting latency timer to 64 [ 2.549127] xen: registering gsi 17 triggering 0 polarity 1 [ 2.549133] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.549138] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.549144] pci 0000:00:1c.1: setting latency timer to 64 [ 2.549153] xen: registering gsi 16 triggering 0 polarity 1 [ 2.549156] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 2.549159] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.549161] Already setup the GSI :16 [ 2.549164] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.549170] pci 0000:00:1c.4: setting latency timer to 64 [ 2.549181] pci 0000:00:1e.0: setting latency timer to 64 [ 2.549186] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.549189] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.549192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.549195] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 2.549198] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 2.549201] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 2.549205] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf9ffffff] [ 2.549208] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 2.549213] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 2.549216] pci_bus 0000:04: resource 1 [mem 0xf4200000-0xf43fffff] [ 2.549220] pci_bus 0000:04: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref] [ 2.549224] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 2.549228] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff] [ 2.549232] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref] [ 2.549236] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 2.549239] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 2.549243] pci_bus 0000:06: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref] [ 2.549247] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 2.549251] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 2.549254] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 2.549258] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 2.549262] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff] [ 2.549265] pci_bus 0000:07: resource 8 [mem 0xdff00000-0xfebfffff] [ 2.549269] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff] [ 2.549272] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff] [ 2.549307] NET: Registered protocol family 2 [ 2.549520] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 2.550969] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 2.551996] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.552158] TCP: Hash tables configured (established 262144 bind 65536) [ 2.552161] TCP reno registered [ 2.552204] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.552268] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.552352] NET: Registered protocol family 1 [ 2.552399] xen: registering gsi 16 triggering 0 polarity 1 [ 2.552405] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 2.552407] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.552410] Already setup the GSI :16 [ 2.552413] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.552437] pci 0000:00:1a.0: PCI INT A disabled [ 2.552446] xen: registering gsi 21 triggering 0 polarity 1 [ 2.552453] xen: --> pirq=21 -> irq=21 (gsi=21) [ 2.552458] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.552481] pci 0000:00:1a.1: PCI INT B disabled [ 2.552489] xen: registering gsi 18 triggering 0 polarity 1 [ 2.552495] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.552500] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.552523] pci 0000:00:1a.2: PCI INT C disabled [ 2.552533] xen: registering gsi 18 triggering 0 polarity 1 [ 2.552536] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.552539] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.552541] Already setup the GSI :18 [ 2.552544] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.565694] pci 0000:00:1a.7: PCI INT C disabled [ 2.565728] xen: registering gsi 23 triggering 0 polarity 1 [ 2.565736] xen: --> pirq=23 -> irq=23 (gsi=23) [ 2.565741] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.565763] pci 0000:00:1d.0: PCI INT A disabled [ 2.565772] xen: registering gsi 19 triggering 0 polarity 1 [ 2.565778] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.565782] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.565805] pci 0000:00:1d.1: PCI INT B disabled [ 2.565813] xen: registering gsi 18 triggering 0 polarity 1 [ 2.565816] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.565819] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.565821] Already setup the GSI :18 [ 2.565824] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.565846] pci 0000:00:1d.2: PCI INT C disabled [ 2.565857] xen: registering gsi 23 triggering 0 polarity 1 [ 2.565860] xen_map_pirq_gsi: returning irq 23 for gsi 23 [ 2.565862] xen: --> pirq=23 -> irq=23 (gsi=23) [ 2.565865] Already setup the GSI :23 [ 2.565867] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.581691] pci 0000:00:1d.7: PCI INT A disabled [ 2.581738] pci 0000:02:00.0: Boot video device [ 2.581791] PCI: CLS 64 bytes, default 64 [ 2.582332] audit: initializing netlink socket (disabled) [ 2.582344] type=2000 audit(1336124227.574:1): initialized [ 2.601350] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.602798] VFS: Disk quotas dquot_6.5.2 [ 2.602848] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.603292] fuse init (API version 7.17) [ 2.603394] msgmni has been set to 655 [ 2.603880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.603921] io scheduler noop registered [ 2.603925] io scheduler deadline registered [ 2.603959] io scheduler cfq registered (default) [ 2.604276] pcieport 0000:00:1c.0: setting latency timer to 64 [ 2.604443] pcieport 0000:00:1c.1: setting latency timer to 64 [ 2.604593] pcieport 0000:00:1c.4: setting latency timer to 64 [ 2.604763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.604784] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.604895] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.604901] ACPI: Power Button [PWRB] [ 2.604945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.604949] ACPI: Power Button [PWRF] [ 2.609738] ERST: Table is not found! [ 2.609742] GHES: HEST is not enabled! [ 2.610105] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.764246] hpet_acpi_add: no address or irqs in _CRS [ 2.764262] Linux agpgart interface v0.103 [ 2.765650] brd: module loaded [ 2.766434] loop: module loaded [ 2.766554] ahci 0000:00:1f.2: version 3.0 [ 2.766567] xen: registering gsi 19 triggering 0 polarity 1 [ 2.766572] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 2.766575] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.766578] Already setup the GSI :19 [ 2.766581] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.766663] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF [ 2.766686] ahci: SSS flag set, parallel bus scan disabled [ 2.766725] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 2.766729] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems [ 2.766736] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.806086] scsi0 : ahci [ 2.806164] scsi1 : ahci [ 2.806231] scsi2 : ahci [ 2.806301] scsi3 : ahci [ 2.806367] scsi4 : ahci [ 2.806433] scsi5 : ahci [ 2.806671] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 325 [ 2.806676] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 325 [ 2.806679] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 325 [ 2.806683] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 325 [ 2.806687] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 325 [ 2.806690] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 325 [ 2.806715] xen: registering gsi 17 triggering 0 polarity 1 [ 2.806719] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 2.806722] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.806724] Already setup the GSI :17 [ 2.806727] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.821697] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.821705] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.821717] ahci 0000:05:00.0: setting latency timer to 64 [ 2.821961] scsi6 : ahci [ 2.822036] scsi7 : ahci [ 2.822147] ata7: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17 [ 2.822152] ata8: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 17 [ 2.822245] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001) [ 2.822252] xen: registering gsi 18 triggering 0 polarity 1 [ 2.822257] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.822259] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.822262] Already setup the GSI :18 [ 2.822265] pata_acpi 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 2.822293] pata_acpi 0000:05:00.1: setting latency timer to 64 [ 2.822308] pata_acpi 0000:05:00.1: PCI INT B disabled [ 2.822536] Fixed MDIO Bus: probed [ 2.822551] tun: Universal TUN/TAP device driver, 1.6 [ 2.822553] tun: (C) 1999-2004 Max Krasnyansky [ 2.822607] PPP generic driver version 2.4.2 [ 2.822704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.822722] xen: registering gsi 18 triggering 0 polarity 1 [ 2.822727] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.822729] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.822732] Already setup the GSI :18 [ 2.822735] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.822753] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.822758] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.822803] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.822850] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.826735] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 2.826753] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000 [ 2.841667] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.841804] hub 1-0:1.0: USB hub found [ 2.841809] hub 1-0:1.0: 6 ports detected [ 2.841884] xen: registering gsi 23 triggering 0 polarity 1 [ 2.841888] xen_map_pirq_gsi: returning irq 23 for gsi 23 [ 2.841891] xen: --> pirq=23 -> irq=23 (gsi=23) [ 2.841893] Already setup the GSI :23 [ 2.841896] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.841914] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.841919] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.841966] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.842007] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.845901] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.845919] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000 [ 2.861667] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.861792] hub 2-0:1.0: USB hub found [ 2.861797] hub 2-0:1.0: 6 ports detected [ 2.861871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.861886] uhci_hcd: USB Universal Host Controller Interface driver [ 2.861905] xen: registering gsi 16 triggering 0 polarity 1 [ 2.861909] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 2.861912] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.861914] Already setup the GSI :16 [ 2.861917] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.861930] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.861934] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.861981] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.862024] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 2.862160] hub 3-0:1.0: USB hub found [ 2.862165] hub 3-0:1.0: 2 ports detected [ 2.862233] xen: registering gsi 21 triggering 0 polarity 1 [ 2.862237] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 2.862240] xen: --> pirq=21 -> irq=21 (gsi=21) [ 2.862242] Already setup the GSI :21 [ 2.862245] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.862255] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.862260] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.862310] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.862352] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 2.862479] hub 4-0:1.0: USB hub found [ 2.862484] hub 4-0:1.0: 2 ports detected [ 2.862551] xen: registering gsi 18 triggering 0 polarity 1 [ 2.862556] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.862559] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.862561] Already setup the GSI :18 [ 2.862564] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.862574] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.862579] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.862626] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.862656] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 2.862781] hub 5-0:1.0: USB hub found [ 2.862786] hub 5-0:1.0: 2 ports detected [ 2.862854] xen: registering gsi 23 triggering 0 polarity 1 [ 2.862858] xen_map_pirq_gsi: returning irq 23 for gsi 23 [ 2.862861] xen: --> pirq=23 -> irq=23 (gsi=23) [ 2.862864] Already setup the GSI :23 [ 2.862867] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.862877] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.862881] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.862928] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.862959] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 2.863090] hub 6-0:1.0: USB hub found [ 2.863095] hub 6-0:1.0: 2 ports detected [ 2.863165] xen: registering gsi 19 triggering 0 polarity 1 [ 2.863169] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 2.863172] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.863174] Already setup the GSI :19 [ 2.863177] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.863187] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.863192] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.863239] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.863282] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 2.863406] hub 7-0:1.0: USB hub found [ 2.863411] hub 7-0:1.0: 2 ports detected [ 2.863478] xen: registering gsi 18 triggering 0 polarity 1 [ 2.863483] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.863486] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.863488] Already setup the GSI :18 [ 2.863491] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.863501] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.863506] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.863556] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.863588] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 2.863713] hub 8-0:1.0: USB hub found [ 2.863718] hub 8-0:1.0: 2 ports detected [ 2.863832] usbcore: registered new interface driver libusual [ 2.863860] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.864282] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.864290] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.864434] mousedev: PS/2 mouse device common for all mice [ 2.864615] rtc_cmos 00:04: RTC can wake from S4 [ 2.864746] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.864778] rtc0: alarms up to one month, 242 bytes nvram [ 2.864840] device-mapper: uevent: version 1.0.3 [ 2.864917] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 2.864924] EFI Variables Facility v0.08 2004-May-17 [ 2.865139] TCP cubic registered [ 2.865218] NET: Registered protocol family 10 [ 2.865693] NET: Registered protocol family 17 [ 2.865709] Registering the dns_resolver key type [ 2.865853] PM: Hibernation image not present or could not be loaded. [ 2.865863] registered taskstats version 1 [ 2.874865] Magic number: 12:825:625 [ 2.874953] rtc_cmos 00:04: setting system clock to 2012-05-04 09:37:07 UTC (1336124227) [ 2.875310] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.875313] EDD information not available. [ 3.125677] ata1: SATA link down (SStatus 0 SControl 300) [ 3.209669] usb 1-2: new high-speed USB device number 3 using ehci_hcd [ 3.313680] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.313711] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.314188] ata8.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB02, max UDMA/100 [ 3.314514] ata7.00: HPA detected: current 976771055, native 976773168 [ 3.314603] ata7.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133 [ 3.314610] ata7.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.314919] ata8.00: configured for UDMA/100 [ 3.315569] ata7.00: configured for UDMA/133 [ 3.343469] hub 1-2:1.0: USB hub found [ 3.343799] hub 1-2:1.0: 4 ports detected [ 3.445676] ata2: SATA link down (SStatus 0 SControl 300) [ 3.581676] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 3.845940] usb 1-2.1: new full-speed USB device number 4 using ehci_hcd [ 3.937680] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.938574] ata3.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133 [ 3.938581] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.939522] ata3.00: configured for UDMA/133 [ 3.939618] scsi 2:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 3.939738] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.939764] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.939857] sd 2:0:0:0: [sda] Write Protect is off [ 3.939862] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.939910] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.952649] sda: sda1 < > [ 3.952948] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.013936] usb 1-2.3: new high-speed USB device number 5 using ehci_hcd [ 4.107479] hub 1-2.3:1.0: USB hub found [ 4.107808] hub 1-2.3:1.0: 4 ports detected [ 4.257672] ata4: SATA link down (SStatus 0 SControl 300) [ 4.377921] usb 1-2.3.3: new low-speed USB device number 6 using ehci_hcd [ 4.749671] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.750538] ata5.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133 [ 4.750545] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.751475] ata5.00: configured for UDMA/133 [ 4.751552] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 4.751681] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 4.751686] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.751768] sd 4:0:0:0: [sdb] Write Protect is off [ 4.751772] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.751797] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.759298] sdb: sdb1 < sdb5 > [ 4.759566] sd 4:0:0:0: [sdb] Attached SCSI disk [ 5.241676] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.242570] ata6.00: ATA-8: WDC WD5002ABYS-01B1B0, 02.03B02, max UDMA/133 [ 5.242577] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 5.243554] ata6.00: configured for UDMA/133 [ 5.243619] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 5.243730] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.243742] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 5.243804] sd 5:0:0:0: [sdc] Write Protect is off [ 5.243809] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.243837] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.243867] scsi 6:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 5.243993] sd 6:0:0:0: [sdd] 976771055 512-byte logical blocks: (500 GB/465 GiB) [ 5.244017] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 5.244084] sd 6:0:0:0: [sdd] Write Protect is off [ 5.244089] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 5.244155] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.244645] scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB02 PQ: 0 ANSI: 5 [ 5.247992] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.247999] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.248118] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 5.248197] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 5.250149] sdc: unknown partition table [ 5.250336] sd 5:0:0:0: [sdc] Attached SCSI disk [ 5.267374] sdd: sdd1 sdd2 sdd3 sdd4 [ 5.267760] sd 6:0:0:0: [sdd] Attached SCSI disk [ 5.268071] Freeing unused kernel memory: 920k freed [ 5.268219] Write protecting the kernel read-only data: 12288k [ 5.272885] Freeing unused kernel memory: 1520k freed [ 5.273494] Freeing unused kernel memory: 1140k freed [ 5.308013] udevd[132]: starting version 175 [ 5.331716] xor: automatically using best checksumming function: generic_sse [ 5.349663] generic_sse: 2980.000 MB/sec [ 5.349671] xor: using function: generic_sse (2980.000 MB/sec) [ 5.350809] device-mapper: dm-raid45: initialized v0.2594b [ 5.390280] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.390312] xen: registering gsi 16 triggering 0 polarity 1 [ 5.390324] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 5.390329] xen: --> pirq=16 -> irq=16 (gsi=16) [ 5.390335] Already setup the GSI :16 [ 5.390341] r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.390390] r8169 0000:06:00.0: setting latency timer to 64 [ 5.391065] r8169 0000:06:00.0: eth0: RTL8168d/8111d at 0xffffc90000c2a000, 00:1f:d0:dc:30:92, XID 081000c0 IRQ 326 [ 5.391072] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 5.400017] xen: registering gsi 18 triggering 0 polarity 1 [ 5.400028] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 5.400033] xen: --> pirq=18 -> irq=18 (gsi=18) [ 5.400037] Already setup the GSI :18 [ 5.400045] firewire_ohci 0000:07:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 5.426325] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2 [ 5.426466] generic-usb 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1a.0-1/input0 [ 5.444109] input: Microsoft SideWinder Force Feedback 2 Joystick as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input3 [ 5.453759] firewire_ohci: Added fw-ohci device 0000:07:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 5.457035] generic-usb 0003:045E:001B.0002: device reports 0 simultaneous effects [ 5.466411] generic-usb 0003:045E:001B.0002: pid_block_load failed 60 times [ 5.466415] generic-usb 0003:045E:001B.0002: upload request failed [ 5.466422] generic-usb 0003:045E:001B.0002: input,hidraw1: USB HID v1.00 Joystick [Microsoft SideWinder Force Feedback 2 Joystick] on usb-0000:00:1a.7-2.1/input0 [ 5.468987] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/input/input4 [ 5.469093] generic-usb 0003:046D:C03F.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-2.3.3/input0 [ 5.469114] usbcore: registered new interface driver usbhid [ 5.469116] usbhid: USB HID core driver [ 5.887488] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 5.953765] firewire_core: created device fw0: GUID 00ac14fa00001fd0, S400 [ 6.089730] device-mapper: dm-raid45: /dev/sda is raid disk 0 [ 6.089735] device-mapper: dm-raid45: /dev/sdb is raid disk 1 [ 6.089738] device-mapper: dm-raid45: /dev/sdc is raid disk 2 [ 6.089742] device-mapper: dm-raid45: 128/128/256 sectors chunk/io/recovery size, 80 stripes [ 6.089743] algorithm "xor_32", 8 chunks with 9687MB/s [ 6.089744] RAID5 (left asymmetric) set with net 2/3 devices [ 12.114699] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.138489] udevd[813]: starting version 175 [ 12.142198] Adding 8000364k swap on /dev/sdd3. Priority:-1 extents:1 across:8000364k [ 12.154311] lp: driver loaded but no devices found [ 12.163818] it87: Found IT8720F chip at 0x290, revision 5 [ 12.163831] it87: VID is disabled (pins used for GPIO) [ 12.163850] it87: Routing internal VCCH to in7 [ 12.163857] it87: Beeping is supported [ 12.180420] wmi: Mapper loaded [ 12.184995] [drm] Initialized drm 1.1.0 20060810 [ 12.200678] EDAC MC: Ver: 2.1.0 [ 12.202418] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0 [ 12.202444] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED) [ 12.202451] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 12.216439] xen: registering gsi 22 triggering 0 polarity 1 [ 12.216454] xen: --> pirq=22 -> irq=22 (gsi=22) [ 12.216462] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.216611] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 12.217497] xen: registering gsi 18 triggering 0 polarity 1 [ 12.217502] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 12.217505] xen: --> pirq=18 -> irq=18 (gsi=18) [ 12.217508] Already setup the GSI :18 [ 12.217512] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 12.217548] pata_jmicron 0000:05:00.1: setting latency timer to 64 [ 12.218032] scsi8 : pata_jmicron [ 12.218152] scsi9 : pata_jmicron [ 12.219786] ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18 [ 12.219790] ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18 [ 12.263346] device-mapper: multipath: version 1.3.0 loaded [ 12.336747] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 12.542332] hda_codec: ALC888: BIOS auto-probing. [ 12.543375] Bridge firewalling registered [ 12.548962] device eth0 entered promiscuous mode [ 12.551463] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 12.551572] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 12.551683] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 12.551935] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.552150] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.552297] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.552399] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.552528] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.615063] r8169 0000:06:00.0: eth0: link down [ 12.615074] r8169 0000:06:00.0: eth0: link down [ 12.615254] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.620123] ADDRCONF(NETDEV_UP): br0: link is not ready [ 12.634440] kjournald starting. Commit interval 5 seconds [ 12.634669] EXT3-fs (sdd2): using internal journal [ 12.634675] EXT3-fs (sdd2): mounted filesystem with ordered data mode [ 12.664546] type=1400 audit(1336117037.284:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1318 comm="apparmor_parser" [ 12.664683] type=1400 audit(1336117037.284:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1330 comm="apparmor_parser" [ 12.664979] type=1400 audit(1336117037.284:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1318 comm="apparmor_parser" [ 12.664991] type=1400 audit(1336117037.284:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1330 comm="apparmor_parser" [ 12.665196] type=1400 audit(1336117037.284:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1318 comm="apparmor_parser" [ 12.665259] type=1400 audit(1336117037.284:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1330 comm="apparmor_parser" [ 12.982722] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 13.813737] init: failsafe main process (1433) killed by TERM signal [ 13.866358] init: udev-fallback-graphics main process (1546) terminated with status 1 [ 13.878401] type=1400 audit(1336117038.500:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1589 comm="apparmor_parser" [ 13.878607] type=1400 audit(1336117038.500:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1591 comm="apparmor_parser" [ 13.878617] type=1400 audit(1336117038.500:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1590 comm="apparmor_parser" [ 13.878735] type=1400 audit(1336117038.500:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1589 comm="apparmor_parser" [ 14.084048] Event-channel device installed. [ 14.119852] XENBUS: Unable to read cpu state [ 14.119937] XENBUS: Unable to read cpu state [ 14.120029] XENBUS: Unable to read cpu state [ 14.120112] XENBUS: Unable to read cpu state [ 14.120190] XENBUS: Unable to read cpu state [ 14.120327] XENBUS: Unable to read cpu state [ 14.120421] XENBUS: Unable to read cpu state [ 14.120504] XENBUS: Unable to read cpu state [ 14.276690] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.328570] nf_conntrack version 0.5.0 (2648 buckets, 10592 max) [ 14.353742] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 15.006250] r8169 0000:06:00.0: eth0: link up [ 15.006398] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.007175] br0: port 1(eth0) entering forwarding state [ 15.007179] br0: port 1(eth0) entering forwarding state [ 15.007314] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 15.266765] Ebtables v2.0 registered [ 15.283111] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 25.249649] br0: no IPv6 routers present [ 140.007915] xen-acpi-processor: Max ACPI ID: 14 [ 140.009899] ACPI CPU0 - P-states uploaded. [ 140.009901] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.009904] P1: 2660 MHz, 130000 mW, 10 uS [ 140.009906] P2: 2527 MHz, 109000 mW, 10 uS [ 140.009907] P3: 2394 MHz, 100000 mW, 10 uS [ 140.009909] P4: 2261 MHz, 83000 mW, 10 uS [ 140.009911] P5: 2128 MHz, 76000 mW, 10 uS [ 140.009913] P6: 1995 MHz, 63000 mW, 10 uS [ 140.009915] P7: 1862 MHz, 57000 mW, 10 uS [ 140.009917] P8: 1729 MHz, 47000 mW, 10 uS [ 140.009918] P9: 1596 MHz, 43000 mW, 10 uS [ 140.009926] ACPI CPU1 - P-states uploaded. [ 140.009928] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.009930] P1: 2660 MHz, 130000 mW, 10 uS [ 140.009932] P2: 2527 MHz, 109000 mW, 10 uS [ 140.009934] P3: 2394 MHz, 100000 mW, 10 uS [ 140.009935] P4: 2261 MHz, 83000 mW, 10 uS [ 140.009937] P5: 2128 MHz, 76000 mW, 10 uS [ 140.009939] P6: 1995 MHz, 63000 mW, 10 uS [ 140.009941] P7: 1862 MHz, 57000 mW, 10 uS [ 140.009943] P8: 1729 MHz, 47000 mW, 10 uS [ 140.009945] P9: 1596 MHz, 43000 mW, 10 uS [ 140.009950] ACPI CPU2 - P-states uploaded. [ 140.009952] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.009954] P1: 2660 MHz, 130000 mW, 10 uS [ 140.009956] P2: 2527 MHz, 109000 mW, 10 uS [ 140.009958] P3: 2394 MHz, 100000 mW, 10 uS [ 140.009960] P4: 2261 MHz, 83000 mW, 10 uS [ 140.009962] P5: 2128 MHz, 76000 mW, 10 uS [ 140.009964] P6: 1995 MHz, 63000 mW, 10 uS [ 140.009965] P7: 1862 MHz, 57000 mW, 10 uS [ 140.009967] P8: 1729 MHz, 47000 mW, 10 uS [ 140.009969] P9: 1596 MHz, 43000 mW, 10 uS [ 140.009975] ACPI CPU3 - P-states uploaded. [ 140.009977] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.009979] P1: 2660 MHz, 130000 mW, 10 uS [ 140.009981] P2: 2527 MHz, 109000 mW, 10 uS [ 140.009983] P3: 2394 MHz, 100000 mW, 10 uS [ 140.009984] P4: 2261 MHz, 83000 mW, 10 uS [ 140.009986] P5: 2128 MHz, 76000 mW, 10 uS [ 140.009988] P6: 1995 MHz, 63000 mW, 10 uS [ 140.009990] P7: 1862 MHz, 57000 mW, 10 uS [ 140.009992] P8: 1729 MHz, 47000 mW, 10 uS [ 140.009994] P9: 1596 MHz, 43000 mW, 10 uS [ 140.009999] ACPI CPU4 - P-states uploaded. [ 140.010001] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.010003] P1: 2660 MHz, 130000 mW, 10 uS [ 140.010005] P2: 2527 MHz, 109000 mW, 10 uS [ 140.010007] P3: 2394 MHz, 100000 mW, 10 uS [ 140.010008] P4: 2261 MHz, 83000 mW, 10 uS [ 140.010010] P5: 2128 MHz, 76000 mW, 10 uS [ 140.010012] P6: 1995 MHz, 63000 mW, 10 uS [ 140.010014] P7: 1862 MHz, 57000 mW, 10 uS [ 140.010016] P8: 1729 MHz, 47000 mW, 10 uS [ 140.010018] P9: 1596 MHz, 43000 mW, 10 uS [ 140.010023] ACPI CPU5 - P-states uploaded. [ 140.010025] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.010027] P1: 2660 MHz, 130000 mW, 10 uS [ 140.010029] P2: 2527 MHz, 109000 mW, 10 uS [ 140.010031] P3: 2394 MHz, 100000 mW, 10 uS [ 140.010033] P4: 2261 MHz, 83000 mW, 10 uS [ 140.010035] P5: 2128 MHz, 76000 mW, 10 uS [ 140.010036] P6: 1995 MHz, 63000 mW, 10 uS [ 140.010038] P7: 1862 MHz, 57000 mW, 10 uS [ 140.010040] P8: 1729 MHz, 47000 mW, 10 uS [ 140.010042] P9: 1596 MHz, 43000 mW, 10 uS [ 140.010046] ACPI CPU6 - P-states uploaded. [ 140.010048] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.010050] P1: 2660 MHz, 130000 mW, 10 uS [ 140.010051] P2: 2527 MHz, 109000 mW, 10 uS [ 140.010053] P3: 2394 MHz, 100000 mW, 10 uS [ 140.010055] P4: 2261 MHz, 83000 mW, 10 uS [ 140.010057] P5: 2128 MHz, 76000 mW, 10 uS [ 140.010059] P6: 1995 MHz, 63000 mW, 10 uS [ 140.010061] P7: 1862 MHz, 57000 mW, 10 uS [ 140.010062] P8: 1729 MHz, 47000 mW, 10 uS [ 140.010064] P9: 1596 MHz, 43000 mW, 10 uS [ 140.010070] ACPI CPU7 - P-states uploaded. [ 140.010072] *P0: 2661 MHz, 130000 mW, 10 uS [ 140.010074] P1: 2660 MHz, 130000 mW, 10 uS [ 140.010075] P2: 2527 MHz, 109000 mW, 10 uS [ 140.010077] P3: 2394 MHz, 100000 mW, 10 uS [ 140.010079] P4: 2261 MHz, 83000 mW, 10 uS [ 140.010081] P5: 2128 MHz, 76000 mW, 10 uS [ 140.010083] P6: 1995 MHz, 63000 mW, 10 uS [ 140.010085] P7: 1862 MHz, 57000 mW, 10 uS [ 140.010086] P8: 1729 MHz, 47000 mW, 10 uS [ 140.010088] P9: 1596 MHz, 43000 mW, 10 uS [ 140.010095] xen-acpi-processor: ACPI CPU0 w/ PBLK:0x410 [ 140.010184] xen-acpi-processor: ACPI CPU1 w/ PBLK:0x410 [ 140.010269] xen-acpi-processor: ACPI CPU2 w/ PBLK:0x410 [ 140.010356] xen-acpi-processor: ACPI CPU3 w/ PBLK:0x410 [ 140.010441] xen-acpi-processor: ACPI CPU4 w/ PBLK:0x410 [ 140.010526] xen-acpi-processor: ACPI CPU5 w/ PBLK:0x410 [ 140.010611] xen-acpi-processor: ACPI CPU6 w/ PBLK:0x410 [ 140.010696] xen-acpi-processor: ACPI CPU7 w/ PBLK:0x410 [ 140.010781] xen-acpi-processor: ACPI CPU8 w/ PBLK:0x410 [ 140.010787] xen-acpi-processor: ACPI CPU9 w/ PBLK:0x410 [ 140.010793] xen-acpi-processor: ACPI CPU10 w/ PBLK:0x410 [ 140.010798] xen-acpi-processor: ACPI CPU11 w/ PBLK:0x410 [ 140.010804] xen-acpi-processor: ACPI CPU12 w/ PBLK:0x410 [ 140.010809] xen-acpi-processor: ACPI CPU13 w/ PBLK:0x410 [ 140.010815] xen-acpi-processor: ACPI CPU14 w/ PBLK:0x410 [ 140.010820] xen-acpi-processor: ACPI CPU15 w/ PBLK:0x410 [ 140.011061] xen-acpi-processor: No _Cx for ACPI CPU 8 [ 140.011064] xen-acpi-processor: No _Cx for ACPI CPU 9 [ 140.011066] xen-acpi-processor: No _Cx for ACPI CPU 10 [ 140.011068] xen-acpi-processor: No _Cx for ACPI CPU 11 [ 140.011070] xen-acpi-processor: No _Cx for ACPI CPU 12 [ 140.011072] xen-acpi-processor: No _Cx for ACPI CPU 13 [ 140.011074] xen-acpi-processor: No _Cx for ACPI CPU 14 [ 183.118282] init: tty1 main process ended, respawning