domid: 1
-c config qemu network with xen bridge for 
vif1.0-emu br0
Using file /dev/mainvg/winxpbravo in read-write mode
Using file /DATA/xpua.iso in read-only mode
Watching /local/domain/0/device-model/1/logdirty/cmd
Watching /local/domain/0/device-model/1/command
Watching /local/domain/1/cpu
char device redirected to /dev/pts/1
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 24648f2d-a378-8d17-0aa5-2e494641dea2
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/24648f2d-a378-8d17-0aa5-2e494641dea2/vncpasswd.
medium change watch on `hdc' (index: 1): /DATA/xpua.iso
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
vcpu-set: watch node error.
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
dm-command: hot insert pass-through pci dev 
register_real_device: Assigning real physical device 07:01.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x7:0x1.0x0
pt_register_regions: IO region registered (size=0x04000000 base_addr=0xf4000000)
pci_intx: intx=1
register_real_device: Real physical device 07:01.0 registered successfuly!
IRQ type = INTx
char device redirected to /dev/pts/2
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
pt_iomem_map: e_phys=f0000000 maddr=f4000000 type=0 len=67108864 index=0 first_map=1
cirrus vga map change while on lfb mode
mapping vram to f4000000 - f4400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
pt_iomem_map: e_phys=ffffffff maddr=f4000000 type=0 len=67108864 index=0 first_map=0
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:05.0][Offset:30h][Length:4]
pt_iomem_map: e_phys=f0000000 maddr=f4000000 type=0 len=67108864 index=0 first_map=0
shutdown requested in cpu_handle_ioreq
Issued domain 1 poweroff