__ __ _ _ ____ ___ _ _ \ \/ /___ _ __ | || | |___ \ / _ \ _ __ ___| || | _ __ _ __ ___ \ // _ \ '_ \ | || |_ __) || | | |__| '__/ __| || |_ __| '_ \| '__/ _ \ / \ __/ | | | |__ _| / __/ | |_| |__| | | (__|__ _|__| |_) | | | __/ /_/\_\___|_| |_| |_|(_)_____(_)___/ |_| \___| |_| | .__/|_| \___| |_| (XEN) Xen version 4.2.0-rc4-pre (root@) (gcc (Debian 4.4.5-8) 4.4.5) Mon Sep 3 18:32:07 CEST 2012 (XEN) Latest ChangeSet: Thu Aug 30 18:17:20 2012 +0100 25791:9e5665f9f430 (XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1 (XEN) Command line: dom0_mem=1024M,max:1024M loglvl=all loglvl_guest=all console_timestamps vga=gfx-800x600x8 noreboot debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug com1=38400,8n1 console=vga,com1 (XEN) Video information: (XEN) VGA is graphics mode 800x600, 8 bpp (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e800 (usable) (XEN) 000000000009e800 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007ee70000 (usable) (XEN) 000000007ee70000 - 000000007ee7e000 (ACPI data) (XEN) 000000007ee7e000 - 000000007eed0000 (ACPI NVS) (XEN) 000000007eed0000 - 000000007ef00000 (reserved) (XEN) 00000000fed00000 - 00000000fed01100 (reserved) (XEN) 00000000fed02000 - 00000000fed14c00 (reserved) (XEN) 00000000fed20000 - 00000000fed40000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) System RAM: 2030MB (2078776kB) (XEN) ACPI: RSDP 000FB080, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT 7EE70100, 005C (r1 A_M_I_ OEMXSDT 5001025 MSFT 97) (XEN) ACPI: FACP 7EE70290, 00F4 (r3 A_M_I_ OEMFACP 5001025 MSFT 97) (XEN) ACPI: DSDT 7EE70440, 841F (r1 A1065 A1065000 0 INTL 20060113) (XEN) ACPI: FACS 7EE7E000, 0040 (XEN) ACPI: APIC 7EE70390, 006C (r1 A_M_I_ OEMAPIC 5001025 MSFT 97) (XEN) ACPI: MCFG 7EE70400, 003C (r1 A_M_I_ OEMMCFG 5001025 MSFT 97) (XEN) ACPI: OEMB 7EE7E040, 0089 (r1 A_M_I_ AMI_OEM 5001025 MSFT 97) (XEN) ACPI: HPET 7EE78860, 0038 (r1 A_M_I_ OEMHPET 5001025 MSFT 97) (XEN) ACPI: GSCI 7EE7E0D0, 2024 (r1 A_M_I_ GMCHSCI 5001025 MSFT 97) (XEN) ACPI: SSDT 7EE80A00, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-000000007ee70000 (XEN) Domain heap initialised (XEN) vesafb: framebuffer at 0xfd800000, mapped to 0xffff82c000000000, using 2048k, total 4096k (XEN) vesafb: mode is 800x600x8, linelength=800, font 8x8 (XEN) vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0 (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) APIC boot state is 'xapic' (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[7ee7e00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) (XEN) Processor #2 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) (XEN) Processor #3 7:7 APIC version 20 (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) Table is not found! (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs) (XEN) mapped APIC to ffff82c3ffdfe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffdfd000 (fec00000) (XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2666.427 MHz processor. (XEN) Initing memory sharing. (XEN) xstate_init: using cntxt_size: 0x240 and states: 0x3 (XEN) mce_intel.c:1239: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 50014 (XEN) Getting VERSION: 50014 (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 4-0, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #4 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #4...... (XEN) .... register #00: 04000000 (XEN) ....... : physical APIC id: 04 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 001 01 0 0 0 0 0 1 1 28 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 30 (XEN) 04 001 01 0 0 0 0 0 1 1 F1 (XEN) 05 001 01 0 0 0 0 0 1 1 38 (XEN) 06 001 01 0 0 0 0 0 1 1 40 (XEN) 07 001 01 0 0 0 0 0 1 1 48 (XEN) 08 001 01 0 0 0 0 0 1 1 50 (XEN) 09 001 01 1 1 0 0 0 1 1 58 (XEN) 0a 001 01 0 0 0 0 0 1 1 60 (XEN) 0b 001 01 0 0 0 0 0 1 1 68 (XEN) 0c 001 01 0 0 0 0 0 1 1 70 (XEN) 0d 001 01 0 0 0 0 0 1 1 78 (XEN) 0e 001 01 0 0 0 0 0 1 1 88 (XEN) 0f 001 01 0 0 0 0 0 1 1 90 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 010 00 1 0 0 0 0 0 2 20 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ48 -> 0:3 (XEN) IRQ241 -> 0:4 (XEN) IRQ56 -> 0:5 (XEN) IRQ64 -> 0:6 (XEN) IRQ72 -> 0:7 (XEN) IRQ80 -> 0:8 (XEN) IRQ88 -> 0:9 (XEN) IRQ96 -> 0:10 (XEN) IRQ104 -> 0:11 (XEN) IRQ112 -> 0:12 (XEN) IRQ120 -> 0:13 (XEN) IRQ136 -> 0:14 (XEN) IRQ144 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 2666.3903 MHz. (XEN) ..... host bus clock speed is 333.2987 MHz. (XEN) ..... bus_scale = 0x00015555 (XEN) [2012-09-04 16:40:43] Platform timer is 14.318MHz HPET (XEN) [2012-09-04 16:40:43] Allocated console ring of 32 KiB. (XEN) [2012-09-04 16:40:43] VMX: Supported advanced features: (XEN) [2012-09-04 16:40:43] - APIC MMIO access virtualisation (XEN) [2012-09-04 16:40:43] - APIC TPR shadow (XEN) [2012-09-04 16:40:43] - Virtual NMI (XEN) [2012-09-04 16:40:43] - MSR direct-access bitmap (XEN) [2012-09-04 16:40:43] HVM: ASIDs disabled. (XEN) [2012-09-04 16:40:43] HVM: VMX enabled (XEN) [2012-09-04 16:40:42] masked ExtINT on CPU#1 (XEN) [2012-09-04 16:40:42] masked ExtINT on CPU#2 (XEN) [2012-09-04 16:40:42] masked ExtINT on CPU#3 (XEN) [2012-09-04 16:40:43] Brought up 4 CPUs (XEN) [2012-09-04 16:40:43] HPET: 8 timers (8 will be used for broadcast) (XEN) [2012-09-04 16:40:43] ACPI sleep modes: S3 (XEN) [2012-09-04 16:40:43] mcheck_poll: Machine check polling timer started. (XEN) [2012-09-04 16:40:43] *** LOADING DOMAIN 0 *** (XEN) [2012-09-04 16:40:43] elf_parse_binary: phdr: paddr=0x1000000 memsz=0xd74000 (XEN) [2012-09-04 16:40:43] elf_parse_binary: phdr: paddr=0x1e00000 memsz=0xdd0e8 (XEN) [2012-09-04 16:40:43] elf_parse_binary: phdr: paddr=0x1ede000 memsz=0x13c00 (XEN) [2012-09-04 16:40:43] elf_parse_binary: phdr: paddr=0x1ef2000 memsz=0xde6000 (XEN) [2012-09-04 16:40:43] elf_parse_binary: memory: 0x1000000 -> 0x2cd8000 (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: GUEST_OS = "linux" (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: ENTRY = 0xffffffff81ef2210 (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: PAE_MODE = "yes" (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: LOADER = "generic" (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: unknown xen elf note (0xd) (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) [2012-09-04 16:40:43] elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) [2012-09-04 16:40:43] elf_xen_addr_calc_check: addresses: (XEN) [2012-09-04 16:40:43] virt_base = 0xffffffff80000000 (XEN) [2012-09-04 16:40:43] elf_paddr_offset = 0x0 (XEN) [2012-09-04 16:40:43] virt_offset = 0xffffffff80000000 (XEN) [2012-09-04 16:40:43] virt_kstart = 0xffffffff81000000 (XEN) [2012-09-04 16:40:43] virt_kend = 0xffffffff82cd8000 (XEN) [2012-09-04 16:40:43] virt_entry = 0xffffffff81ef2210 (XEN) [2012-09-04 16:40:43] p2m_base = 0xffffffffffffffff (XEN) [2012-09-04 16:40:43] Xen kernel: 64-bit, lsb, compat32 (XEN) [2012-09-04 16:40:43] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2cd8000 (XEN) [2012-09-04 16:40:43] PHYSICAL MEMORY ARRANGEMENT: (XEN) [2012-09-04 16:40:43] Dom0 alloc.: 0000000074000000->0000000078000000 (244617 pages to be allocated) (XEN) [2012-09-04 16:40:44] Init. ramdisk: 000000007e589000->000000007e9ff600 (XEN) [2012-09-04 16:40:44] VIRTUAL MEMORY ARRANGEMENT: (XEN) [2012-09-04 16:40:44] Loaded kernel: ffffffff81000000->ffffffff82cd8000 (XEN) [2012-09-04 16:40:44] Init. ramdisk: ffffffff82cd8000->ffffffff8314e600 (XEN) [2012-09-04 16:40:44] Phys-Mach map: ffffffff8314f000->ffffffff8334f000 (XEN) [2012-09-04 16:40:44] Start info: ffffffff8334f000->ffffffff8334f4b4 (XEN) [2012-09-04 16:40:44] Page tables: ffffffff83350000->ffffffff8336d000 (XEN) [2012-09-04 16:40:44] Boot stack: ffffffff8336d000->ffffffff8336e000 (XEN) [2012-09-04 16:40:44] TOTAL: ffffffff80000000->ffffffff83400000 (XEN) [2012-09-04 16:40:44] ENTRY ADDRESS: ffffffff81ef2210 (XEN) [2012-09-04 16:40:44] Dom0 has maximum 4 VCPUs (XEN) [2012-09-04 16:40:44] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81d74000 (XEN) [2012-09-04 16:40:44] elf_load_binary: phdr 1 at 0xffffffff81e00000 -> 0xffffffff81edd0e8 (XEN) [2012-09-04 16:40:44] elf_load_binary: phdr 2 at 0xffffffff81ede000 -> 0xffffffff81ef1c00 (XEN) [2012-09-04 16:40:44] elf_load_binary: phdr 3 at 0xffffffff81ef2000 -> 0xffffffff81f8c000 (XEN) [2012-09-04 16:40:44] Scrubbing Free RAM: .........done. (XEN) [2012-09-04 16:40:44] Initial low memory virq threshold set at 0x4000 pages. (XEN) [2012-09-04 16:40:44] Std. Loglevel: All (XEN) [2012-09-04 16:40:44] Guest Loglevel: All (XEN) [2012-09-04 16:40:44] Xen is relinquishing VGA console. (XEN) [2012-09-04 16:40:44] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) [2012-09-04 16:40:44] Freed 256kB init memory. mapping kernel into physical memory about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc4-20120830+ (root@xentest) (gcc version 4.4.5 (Debian 4.4.5-8) ) #66 SMP PREEMPT Mon Sep 3 20:05:50 CEST 2012 [ 0.000000] Command line: root=/dev/sda1 ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=303 earlyprintk=xen max_loop=50 loop_max_part=10 debug loglevel=10 [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed [ 0.000000] Released 98 pages of unused memory [ 0.000000] Set 528882 page(s) to 1-1 mapping [ 0.000000] Populating 40000-40062 pfn range: 98 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000040061fff] usable [ 0.000000] Xen: [mem 0x0000000040062000-0x000000007ee6ffff] unusable [ 0.000000] Xen: [mem 0x000000007ee70000-0x000000007ee7dfff] ACPI data [ 0.000000] Xen: [mem 0x000000007ee7e000-0x000000007eecffff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007eed0000-0x000000007eefffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed010ff] reserved [ 0.000000] Xen: [mem 0x00000000fed02000-0x00000000fed14bff] reserved [ 0.000000] Xen: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: user-defined physical RAM map: [ 0.000000] user: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] user: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] user: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] user: [mem 0x0000000040062000-0x000000007ee6ffff] unusable [ 0.000000] user: [mem 0x000000007ee70000-0x000000007ee7dfff] ACPI data [ 0.000000] user: [mem 0x000000007ee7e000-0x000000007eecffff] ACPI NVS [ 0.000000] user: [mem 0x000000007eed0000-0x000000007eefffff] reserved [ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] user: [mem 0x00000000fed00000-0x00000000fed010ff] reserved [ 0.000000] user: [mem 0x00000000fed02000-0x00000000fed14bff] reserved [ 0.000000] user: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/P5Q-EM DO, BIOS 1208 05/25/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x0314efff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x3fffffff] [ 0.000000] [mem 0x00000000-0x3fffffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x3fffffff @ [mem 0x02ad6000-0x02cd7fff] [ 0.000000] xen: setting RW the range 2cb8000 - 2cd8000 [ 0.000000] RAMDISK: [mem 0x02cd8000-0x0314efff] [ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000007ee70100 0005C (v01 A_M_I_ OEMXSDT 05001025 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ee70290 000F4 (v03 A_M_I_ OEMFACP 05001025 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ee70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 000000007ee7e000 00040 [ 0.000000] ACPI: APIC 000000007ee70390 0006C (v01 A_M_I_ OEMAPIC 05001025 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ee70400 0003C (v01 A_M_I_ OEMMCFG 05001025 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ee7e040 00089 (v01 A_M_I_ AMI_OEM 05001025 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007ee78860 00038 (v01 A_M_I_ OEMHPET 05001025 MSFT 00000097) [ 0.000000] ACPI: GSCI 000000007ee7e0d0 02024 (v01 A_M_I_ GMCHSCI 05001025 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000007ee80a00 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3fffffff] [ 0.000000] NODE_DATA [mem 0x3fff5000-0x3fffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x3fffffff] [ 0.000000] On node 0 totalpages: 262030 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4032 pages used for memmap [ 0.000000] DMA32 zone: 254016 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x7ef00000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.2.0-rc4-pre (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s80896 r8192 d21504 u524288 [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257928 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda1 ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=303 earlyprintk=xen max_loop=50 loop_max_part=10 debug loglevel=10 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] software IO TLB [mem 0x3a600000-0x3e5fffff] (64MB) mapped at [ffff88003a600000-ffff88003e5fffff] [ 0.000000] Memory: 931024k/1048576k available (8511k kernel code, 456k absent, 117096k reserved, 6704k data, 672k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) (XEN) [2012-09-04 16:40:45] IOAPIC[0]: Set PCI routing entry (4-9 -> 0x58 -> IRQ 9 Mode:1 Active:0) [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc4-20120830+ (root@xentest) (gcc version 4.4.5 (Debian 4.4.5-8) ) #66 SMP PREEMPT Mon Sep 3 20:05:50 CEST 2012 [ 0.000000] Command line: root=/dev/sda1 ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=303 earlyprintk=xen max_loop=50 loop_max_part=10 debug loglevel=10 [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed [ 0.000000] 1-1 mapping on 9e->100 [ 0.000000] 1-1 mapping on 7ee70->100000 [ 0.000000] Released 98 pages of unused memory [ 0.000000] Set 528882 page(s) to 1-1 mapping [ 0.000000] Populating 40000-40062 pfn range: 98 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000040061fff] usable [ 0.000000] Xen: [mem 0x0000000040062000-0x000000007ee6ffff] unusable [ 0.000000] Xen: [mem 0x000000007ee70000-0x000000007ee7dfff] ACPI data [ 0.000000] Xen: [mem 0x000000007ee7e000-0x000000007eecffff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007eed0000-0x000000007eefffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed010ff] reserved [ 0.000000] Xen: [mem 0x00000000fed02000-0x00000000fed14bff] reserved [ 0.000000] Xen: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] e820: remove [mem 0x40000000-0xfffffffffffffffe] usable [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: user-defined physical RAM map: [ 0.000000] user: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] user: [mem 0x000000000009e800-0x00000000000fffff] reserved [ 0.000000] user: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] user: [mem 0x0000000040062000-0x000000007ee6ffff] unusable [ 0.000000] user: [mem 0x000000007ee70000-0x000000007ee7dfff] ACPI data [ 0.000000] user: [mem 0x000000007ee7e000-0x000000007eecffff] ACPI NVS [ 0.000000] user: [mem 0x000000007eed0000-0x000000007eefffff] reserved [ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] user: [mem 0x00000000fed00000-0x00000000fed010ff] reserved [ 0.000000] user: [mem 0x00000000fed02000-0x00000000fed14bff] reserved [ 0.000000] user: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/P5Q-EM DO, BIOS 1208 05/25/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x0314efff] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x3fffffff] [ 0.000000] [mem 0x00000000-0x3fffffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x3fffffff @ [mem 0x02ad6000-0x02cd7fff] [ 0.000000] xen: setting RW the range 2cb8000 - 2cd8000 [ 0.000000] RAMDISK: [mem 0x02cd8000-0x0314efff] [ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000007ee70100 0005C (v01 A_M_I_ OEMXSDT 05001025 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ee70290 000F4 (v03 A_M_I_ OEMFACP 05001025 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ee70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 000000007ee7e000 00040 [ 0.000000] ACPI: APIC 000000007ee70390 0006C (v01 A_M_I_ OEMAPIC 05001025 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ee70400 0003C (v01 A_M_I_ OEMMCFG 05001025 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ee7e040 00089 (v01 A_M_I_ AMI_OEM 05001025 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007ee78860 00038 (v01 A_M_I_ OEMHPET 05001025 MSFT 00000097) [ 0.000000] ACPI: GSCI 000000007ee7e0d0 02024 (v01 A_M_I_ GMCHSCI 05001025 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000007ee80a00 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3fffffff] [ 0.000000] NODE_DATA [mem 0x3fff5000-0x3fffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x3fffffff] [ 0.000000] On node 0 totalpages: 262030 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4032 pages used for memmap [ 0.000000] DMA32 zone: 254016 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_ir[ 1.338661] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.338828] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.338839] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.338847] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.338848] uhci_hcd 0000:00:1a.1: Performing full reset [ 1.338869] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 1.338905] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800 [ 1.338979] usb usb4: default language 0x0409 [ 1.338992] usb usb4: udev 1, busnum 4, minor = 384 [ 1.338994] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.338996] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.338998] usb usb4: Product: UHCI Host Controller [ 1.339000] usb usb4: Manufacturer: Linux 3.6.0-rc4-20120830+ uhci_hcd [ 1.339001] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.339208] usb usb4: usb_probe_device [ 1.339211] usb usb4: configuration #1 chosen from 1 choice [ 1.339226] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.339375] hub 4-0:1.0: usb_probe_interface [ 1.339377] hub 4-0:1.0: usb_probe_interface - got id [ 1.339379] hub 4-0:1.0: USB hub found [ 1.339387] hub 4-0:1.0: 2 ports detected [ 1.339388] hub 4-0:1.0: standalone hub [ 1.339390] hub 4-0:1.0: no power switching (usb 1.0) [ 1.339391] hub 4-0:1.0: individual port over-current protection [ 1.339393] hub 4-0:1.0: power on to power good time: 2ms [ 1.339403] hub 4-0:1.0: local power source is good [ 1.339405] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.339503] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 1.339546] xen: registering gsi 18 triggering 0 polarity 1 [ 1.339548] Already setup the GSI :18 [ 1.339562] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.339567] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.339778] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.339789] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.339796] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.339798] uhci_hcd 0000:00:1a.2: Performing full reset [ 1.339819] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 1.339826] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000b880 [ 1.339904] usb usb5: default language 0x0409 [ 1.339917] usb usb5: udev 1, busnum 5, minor = 512 [ 1.339920] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.339921] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.339923] usb usb5: Product: UHCI Host Controller [ 1.339925] usb usb5: Manufacturer: Linux 3.6.0-rc4-20120830+ uhci_hcd [ 1.339927] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.340194] usb usb5: usb_probe_device [ 1.340196] usb usb5: configuration #1 chosen from 1 choice [ 1.340208] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.340350] hub 5-0:1.0: usb_probe_interface [ 1.340351] hub 5-0:1.0: usb_probe_interface - got id [ 1.340354] hub 5-0:1.0: USB hub found [ 1.340361] hub 5-0:1.0: 2 ports detected [ 1.340363] hub 5-0:1.0: standalone hub [ 1.340365] hub 5-0:1.0: no power switching (usb 1.0) [ 1.340366] hub 5-0:1.0: individual port over-current protection [ 1.340368] hub 5-0:1.0: power on to power good time: 2ms [ 1.340378] hub 5-0:1.0: local power source is good [ 1.340380] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.340477] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 1.340523] xen: registering gsi 23 triggering 0 polarity 1 [ 1.340525] Already setup the GSI :23 [ 1.340538] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.340542] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.340708] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.340719] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.340727] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.340728] uhci_hcd 0000:00:1d.0: Performing full reset [ 1.340749] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.340756] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000 [ 1.340832] usb usb6: default language 0x0409 [ 1.340845] usb usb6: udev 1, busnum 6, minor = 640 [ 1.340847] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.340849] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.340851] usb usb6: Product: UHCI Host Controller [ 1.340853] usb usb6: Manufacturer: Linux 3.6.0-rc4-20120830+ uhci_hcd [ 1.340854] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.341061] usb usb6: usb_probe_device [ 1.341064] usb usb6: configuration #1 chosen from 1 choice [ 1.341076] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.341220] hub 6-0:1.0: usb_probe_interface [ 1.341221] hub 6-0:1.0: usb_probe_interface - got id [ 1.341224] hub 6-0:1.0: USB hub found [ 1.341232] hub 6-0:1.0: 2 ports detected [ 1.341233] hub 6-0:1.0: standalone hub [ 1.341235] hub 6-0:1.0: no power switching (usb 1.0) [ 1.341236] hub 6-0:1.0: individual port over-current protection [ 1.341238] hub 6-0:1.0: power on to power good time: 2ms [ 1.341248] hub 6-0:1.0: local power source is good [ 1.341250] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.341359] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 1.341391] xen: registering gsi 19 triggering 0 polarity 1 [ 1.341393] Already setup the GSI :19 [ 1.341406] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.341410] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.341595] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.341605] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.341613] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.341614] uhci_hcd 0000:00:1d.1: Performing full reset [ 1.341635] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 1.341673] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080 [ 1.341750] usb usb7: default language 0x0409 [ 1.341764] usb usb7: udev 1, busnum 7, minor = 768 [ 1.341766] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.341767] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.341769] usb usb7: Product: UHCI Host Controller [ 1.341771] usb usb7: Manufacturer: Linux 3.6.0-rc4-20120830+ uhci_hcd [ 1.341773] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.341979] usb usb7: usb_probe_device [ 1.341982] usb usb7: configuration #1 chosen from 1 choice [ 1.341994] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.342135] hub 7-0:1.0: usb_probe_interface [ 1.342136] hub 7-0:1.0: usb_probe_interface - got id [ 1.342139] hub 7-0:1.0: USB hub found [ 1.342146] hub 7-0:1.0: 2 ports detected [ 1.342148] hub 7-0:1.0: standalone hub [ 1.342149] hub 7-0:1.0: no power switching (usb 1.0) [ 1.342151] hub 7-0:1.0: individual port over-current protection [ 1.342153] hub 7-0:1.0: power on to power good time: 2ms [ 1.342163] hub 7-0:1.0: local power source is good [ 1.342165] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.342274] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 1.342306] xen: registering gsi 18 triggering 0 polarity 1 [ 1.342308] Already setup the GSI :18 [ 1.342325] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.342330] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.342496] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.342507] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.342514] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.342516] uhci_hcd 0000:00:1d.2: Performing full reset [ 1.342536] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 1.342544] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 1.342619] usb usb8: default language 0x0409 [ 1.342632] usb usb8: udev 1, busnum 8, minor = 896 [ 1.342634] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.342636] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.342638] usb usb8: Product: UHCI Host Controller [ 1.342640] usb usb8: Manufacturer: Linux 3.6.0-rc4-20120830+ uhci_hcd [ 1.342641] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.342848] usb usb8: usb_probe_device [ 1.342850] usb usb8: configuration #1 chosen from 1 choice [ 1.342862] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 1.343008] hub 8-0:1.0: usb_probe_interface [ 1.343010] hub 8-0:1.0: usb_probe_interface - got id [ 1.343012] hub 8-0:1.0: USB hub found [ 1.343020] hub 8-0:1.0: 2 ports detected [ 1.343022] hub 8-0:1.0: standalone hub [ 1.343023] hub 8-0:1.0: no power switching (usb 1.0) [ 1.343024] hub 8-0:1.0: individual port over-current protection [ 1.343026] hub 8-0:1.0: power on to power good time: 2ms [ 1.343036] hub 8-0:1.0: local power source is good [ 1.343038] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 1.343146] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 1.343453] usbcore: registered new interface driver usblp [ 1.343454] Initializing USB Mass Storage driver... [ 1.343604] usbcore: registered new interface driver usb-storage [ 1.343605] USB Mass Storage support registered. [ 1.343856] usbcore: registered new interface driver libusual [ 1.344111] usbcore: registered new interface driver usbserial [ 1.344113] usbserial: USB Serial Driver core [ 1.344234] usbcore: registered new interface driver cp210x [ 1.344423] USB Serial support registered for cp210x [ 1.344578] usbcore: registered new interface driver cypress_m8 [ 1.344699] USB Serial support registered for DeLorme Earthmate USB [ 1.344810] USB Serial support registered for HID->COM RS232 Adapter [ 1.344920] USB Serial support registered for Nokia CA-42 V2 Adapter [ 1.345046] usbcore: registered new interface driver mos7720 [ 1.345158] USB Serial support registered for Moschip 2 port adapter [ 1.345285] usbcore: registered new interface driver mos7840 [ 1.345395] USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 1.345680] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.348636] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.348662] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.349149] mousedev: PS/2 mouse device common for all mice [ 1.350048] rtc_cmos 00:03: RTC can wake from S4 [ 1.350584] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.350652] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.350837] xen: registering gsi 18 triggering 0 polarity 1 [ 1.350841] Already setup the GSI :18 [ 1.350852] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20120711/utaddress-251) [ 1.350855] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.351230] lirc_dev: IR Remote Control driver registered, major 250 [ 1.351250] IR NEC protocol handler initialized [ 1.351252] IR RC5(x) protocol handler initialized [ 1.351253] IR RC6 protocol handler initialized [ 1.351254] IR JVC protocol handler initialized [ 1.351255] IR Sony protocol handler initialized [ 1.351257] IR RC5 (streamzap) protocol handler initialized [ 1.351258] IR SANYO protocol handler initialized [ 1.351259] IR MCE Keyboard/mouse protocol handler initialized [ 1.351260] IR LIRC bridge handler initialized [ 1.352806] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded [ 1.353076] usbcore: registered new interface driver em28xx [ 1.353198] usbcore: registered new interface driver cx231xx [ 1.353200] cx25821: driver version 0.0.106 loaded [ 1.353546] usbcore: registered new interface driver pvrusb2 [ 1.353547] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 1.353549] pvrusb2: Debug mask is 31 (0x1f) [ 1.353686] usbcore: registered new interface driver Philips webcam [ 1.353687] ivtv: Start initialization, version 1.4.3 [ 1.353827] ivtv: End initialization [ 1.353829] ivtvfb: no cards found [ 1.354097] vivi-000: V4L2 device registered as video0 [ 1.354099] Video Technology Magazine Virtual Video Capture Board ver 0.8.1 successfully loaded. [ 1.354100] cx23885 driver version 0.0.3 loaded [ 1.354376] usbcore: registered new interface driver uvcvideo [ 1.354377] USB Video Class driver (1.1.1) [ 1.355170] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 1.355446] xen_wdt: Xen WatchDog Timer Driver v0.01 [ 1.355888] xen_wdt: initialized (timeout=60s, nowayout=0) [ 1.356520] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@xxxxxxxxxx [ 1.360381] usbcore: registered new interface driver usbhid [ 1.360382] usbhid: USB HID core driver [ 1.365315] xen: registering gsi 22 triggering 0 polarity 1 [ 1.365320] Already setup the GSI :22 [ 1.373525] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.407573] xen: registering gsi 17 triggering 0 polarity 1 [ 1.407577] Already setup the GSI :17 [ 1.422111] usbcore: registered new interface driver snd-usb-audio [ 1.422230] usbcore: registered new interface driver snd-ua101 [ 1.422350] usbcore: registered new interface driver snd-usb-usx2y [ 1.422468] usbcore: registered new interface driver snd-usb-caiaq [ 1.422590] usbcore: registered new interface driver snd-usb-6fire [ 1.422644] Netfilter messages via NETLINK v0.30. [ 1.422652] nfnl_acct: registering with nfnetlink. [ 1.422719] nf_conntrack version 0.5.0 (7309 buckets, 29236 max) [ 1.423363] ctnetlink v0.93: registering with nfnetlink. [ 1.423625] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.424004] xt_time: kernel timezone is -0000 [ 1.424027] ip_set: protocol 6 [ 1.424057] IPVS: Registered protocols () [ 1.424233] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 1.424338] IPVS: Creating netns size=1888 id=0 [ 1.424384] IPVS: ipvs loaded. [ 1.424626] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.424742] TCP: cubic registered [ 1.424747] NET: Registered protocol family 17 [ 1.424812] Bridge firewalling registered [ 1.424836] Ebtables v2.0 registered [ 1.426128] registered taskstats version 1 [ 1.436798] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.436803] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.436841] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.440118] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.440126] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.440168] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.440173] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.536329] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 57 [ 2.000210] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 2.346743] usb usb3: suspend_rh (auto-stop) [ 2.346777] usb usb4: suspend_rh (auto-stop) [ 2.346809] usb usb5: suspend_rh (auto-stop) [ 2.346839] usb usb6: suspend_rh (auto-stop) [ 2.346870] usb usb7: suspend_rh (auto-stop) [ 2.346901] usb usb8: suspend_rh (auto-stop) [ 4.148958] console [netcon0] enabled [ 4.148961] ata1.00: 156301488 sectors, multi 0: LB[ 6.395764] EXT3-fs (sda1): recovery required on readonly filesystem [ 6.403759] EXT3-fs (sda1): write access will be enabled during recovery [ 6.873126] kjournald starting. Commit interval 5 seconds [ 6.881465] EXT3-fs (sda1): recovery complete [ 6.881467] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 8.542529] udev[1811]: starting version 164 [ 10.881561] Adding 3229028k swap on /dev/sda5. Priority:-1 extents:1 across:3229028k [ 11.184111] EXT3-fs (sda1): using internal journal [ 15.881149] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 15.891081] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO [ 16.233851] sshd (2578): /proc/2578/oom_adj is deprecated, please use /proc/2578/oom_score_adj instead. [ 99.027836] <4>IN= OUT=eth1 SRC=172.16.1.251 DST=172.16.1.1 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=3195 SEQ=1 [ 150.491674] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1b:a9:25:df:4c:08:00 SRC=172.16.1.12 DST=255.255.255.255 LEN=229 TOS=0x00 PREC=0x00 TTL=64 ID=62270 PROTO=UDP SPT=138 DPT=138 LEN=209 [ 491.994719] <4>IN= OUT=eth1 SRC=172.16.1.251 DST=172.16.1.1 LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=3247 SEQ=1 [ 501.572659] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:24:d7:11:b8:d0:08:00 SRC=172.16.1.20 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=14972 PROTO=UDP SPT=68 DPT=67 LEN=308 [ 504.573049] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:24:d7:11:b8:d0:08:00 SRC=172.16.1.20 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=128 ID=14980 PROTO=UDP SPT=68 DPT=67 LEN=308 [ 754.426100] <4>IN=eth1 OUT= MAC=00:23:54:9a:46:ea:40:61:86:f4:67:d8:08:00 SRC=172.16.1.1 DST=172.16.1.251 LEN=328 TOS=0x10 PREC=0x00 TTL=128 ID=0 PROTO=UDP SPT=67 DPT=68 LEN=308 [ 812.001858] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1b:a9:25:df:4c:08:00 SRC=172.16.1.12 DST=255.255.255.255 LEN=229 TOS=0x00 PREC=0x00 TTL=64 ID=62310 PROTO=UDP SPT=138 DPT=138 LEN=209 [ 853.520849] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 862.272420] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=202 TOS=0x00 PREC=0x00 TTL=128 ID=5702 PROTO=UDP SPT=138 DPT=138 LEN=182 [ 862.275706] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5704 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 863.045167] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5705 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 863.795050] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5706 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 866.545180] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=202 TOS=0x00 PREC=0x00 TTL=128 ID=5707 PROTO=UDP SPT=138 DPT=138 LEN=182 [ 866.548480] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5709 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 867.318502] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5710 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 868.068502] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5711 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 870.818709] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=202 TOS=0x00 PREC=0x00 TTL=128 ID=5712 PROTO=UDP SPT=138 DPT=138 LEN=182 [ 870.848939] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5714 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 871.591894] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5715 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 872.341871] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5716 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 875.115125] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5718 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 875.865386] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5719 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 876.615234] <4>IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:16:36:a7:d0:f3:08:00 SRC=172.16.1.240 DST=172.16.255.255 LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=5720 PROTO=UDP SPT=137 DPT=137 LEN=58 [ 897.161119] device vif1.0 entered promiscuous mode mapping kernel into physical memory about to get started... [ 897.696619] xen_bridge: port 1(vif1.0) entered forwarding state [ 897.716219] xen_bridge: port 1(vif1.0) entered forwarding state [ 898.129465] ------------[ cut here ]------------ [ 898.132209] kernel BUG at drivers/xen/balloon.c:359! [ 898.132209] invalid opcode: 0000 [#1] PREEMPT SMP [ 898.132209] Modules linked in: [ 898.132209] CPU 0 [ 898.132209] Pid: 3338, comm: kworker/0:1 Not tainted 3.6.0-rc4-20120830+ #66 System manufacturer System Product Name/P5Q-EM DO [ 898.132209] RIP: e030:[] [] balloon_process+0x336/0x340 [ 898.132209] RSP: e02b:ffff880037b4dce0 EFLAGS: 00010213 [ 898.132209] RAX: 00000000242b0000 RBX: ffffea0000dfadc0 RCX: 0000000000000000 [ 898.132209] RDX: 0000000000037eb7 RSI: 00000000deadbeef RDI: 00000000000000b7 [ 898.132209] RBP: ffff880037b4dd40 R08: ffffea0000dfade0 R09: 2222222222222222 [ 898.132209] R10: 2222222222222222 R11: 2222222222222222 R12: 0000000000000000 [ 898.132209] R13: ffffea0000dfade0 R14: 0000160000000000 R15: 0000000000000001 [ 898.132209] FS: 00007fd4bd0ec740(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 898.132209] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 898.132209] CR2: 00007fd4b387d000 CR3: 000000003920a000 CR4: 0000000000042660 [ 898.132209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 898.132209] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 898.132209] Process kworker/0:1 (pid: 3338, threadinfo ffff880037b4c000, task ffff8800398fe180) [ 898.132209] Stack: [ 898.132209] 0000000000037eb7 0000000000000001 ffffffff8286c540 0000000000000001 [ 898.132209] 0000000000000000 0000000000007ff0 ffff880037b4dd20 ffffffff81e42a60 [ 898.132209] ffff88003799c6c0 ffff88003fc16700 ffff88003fc0e000 ffff880037b4dd90 [ 898.132209] Call Trace: [ 898.132209] [] process_one_work+0x1bf/0x4a0 [ 898.132209] [] ? process_one_work+0x160/0x4a0 [ 898.132209] [] ? __schedule+0x471/0x8a0 [ 898.132209] [] ? decrease_reservation+0x2d0/0x2d0 [ 898.132209] [] worker_thread+0x152/0x470 [ 898.132209] [] ? _raw_spin_unlock_irqrestore+0x75/0xa0 [ 898.132209] [] ? trace_hardirqs_on+0xd/0x10 [ 898.132209] [] ? _raw_spin_unlock_irqrestore+0x53/0xa0 [ 898.132209] [] ? manage_workers+0x290/0x290 [ 898.132209] [] kthread+0x96/0xa0 [ 898.132209] [] kernel_thread_helper+0x4/0x10 [ 898.132209] [] ? retint_restore_args+0x13/0x13 [ 898.132209] [] ? gs_change+0x13/0x13 [ 898.132209] Code: ff 0f 1f 40 00 48 89 d8 e9 22 fe ff ff 0f 0b eb fe 48 89 d7 48 89 55 a0 e8 18 e7 cc ff 48 83 f8 ff 48 8b 55 a0 0f 84 74 fe ff ff <0f> 0b eb fe 66 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 89 d6 [ 898.132209] RIP [] balloon_process+0x336/0x340 [ 898.132209] RSP [ 898.738233] ---[ end trace 3f7af50285edb7bb ]--- [ 898.749003] BUG: unable to handle kernel paging request at fffffffffffffff8 [ 898.752237] IP: [] kthread_data+0xb/0x20 [ 898.752237] PGD 1e0d067 PUD 1e0e067 PMD 0 [ 898.752237] Oops: 0000 [#2] PREEMPT SMP [ 898.752237] Modules linked in: [ 898.752237] CPU 0 [ 898.752237] Pid: 3338, comm: kworker/0:1 Tainted: G D 3.6.0-rc4-20120830+ #66 System manufacturer System Product Name/P5Q-EM DO [ 898.752237] RIP: e030:[] [] kthread_data+0xb/0x20 [ 898.752237] RSP: e02b:ffff880037b4d898 EFLAGS: 00010082 [ 898.752237] RAX: 0000000000000000 RBX: ffff88003fc12e80 RCX: 0000000000000000 [ 898.752237] RDX: ffffffff820057a0 RSI: 0000000000000000 RDI: ffff8800398fe180 [ 898.752237] RBP: ffff880037b4d898 R08: ffff8800398fe1f0 R09: 0000000000000400 [ 898.752237] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 898.752237] R13: 0000000000000000 R14: ffff880037b4d7b8 R15: ffff880037b4da90 [ 898.752237] FS: 00007fd4bd0ec740(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 898.752237] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 898.752237] CR2: fffffffffffffff8 CR3: 000000003920a000 CR4: 0000000000042660 [ 898.752237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 898.752237] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 898.752237] Process kworker/0:1 (pid: 3338, threadinfo ffff880037b4c000, task ffff8800398fe180) [ 898.752237] Stack: [ 898.752237] ffff880037b4d8c8 ffffffff8108306c 0000000000000000 ffff88003fc12e80 [ 898.752237] 0000000000000000 ffff8800398fe528 ffff880037b4da18 ffffffff8184931f [ 898.752237] 0000000000000000 ffffffff81083bb8 ffff8800398fe180 0000000000012e80 [ 898.752237] Call Trace: [ 898.752237] [] wq_worker_sleeping+0x1c/0x90 [ 898.752237] [] __schedule+0x5ff/0x8a0 [ 898.752237] [] ? free_pid+0x18/0xc0 [ 898.752237] [] ? sha1_transform_ssse3+0x187/0xd00 [ 898.752237] [] ? lock_acquire+0xe4/0x110 [ 898.752237] [] ? do_exit+0x4e7/0x8e0 [ 898.752237] [] ? call_rcu+0x12/0x20 [ 898.752237] [] ? lock_release+0x111/0x260 [ 898.752237] [] schedule+0x24/0x70 [ 898.752237] [] do_exit+0x5b4/0x8e0 [ 898.752237] [] oops_end+0xb0/0xf0 [ 898.752237] [] die+0x56/0x90 [ 898.752237] [] do_trap+0xc4/0x170 [ 898.752237] [] ? do_invalid_op+0x72/0xc0 [ 898.752237] [] do_invalid_op+0xa6/0xc0 [ 898.752237] [] ? balloon_process+0x336/0x340 [ 898.752237] [] ? trace_hardirqs_off_caller+0x78/0x150 [ 898.752237] [] ? trace_hardirqs_off_thunk+0x3a/0x3c [ 898.752237] [] ? restore_args+0x30/0x30 [ 898.752237] [] invalid_op+0x1b/0x20 [ 898.752237] [] ? balloon_process+0x336/0x340 [ 898.752237] [] process_one_work+0x1bf/0x4a0 [ 898.752237] [] ? process_one_work+0x160/0x4a0 [ 898.752237] [] ? __schedule+0x471/0x8a0 [ 898.752237] [] ? decrease_reservation+0x2d0/0x2d0 [ 898.752237] [] worker_thread+0x152/0x470 [ 898.752237] [] ? _raw_spin_unlock_irqrestore+0x75/0xa0 [ 898.752237] [] ? trace_hardirqs_on+0xd/0x10 [ 898.752237] [] ? _raw_spin_unlock_irqrestore+0x53/0xa0 [ 898.752237] [] ? manage_workers+0x290/0x290 [ 898.752237] [] kthread+0x96/0xa0 [ 898.752237] [] kernel_thread_helper+0x4/0x10 [ 898.752237] [] ? retint_restore_args+0x13/0x13 [ 898.752237] [] ? gs_change+0x13/0x13 [ 898.752237] Code: 55 65 48 8b 04 25 80 c6 00 00 48 8b 80 50 03 00 00 48 89 e5 8b 40 f0 c9 c3 0f 1f 80 00 00 00 00 48 8b 87 50 03 00 00 55 48 89 e5 <48> 8b 40 f8 c9 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 [ 898.752237] RIP [] kthread_data+0xb/0x20 [ 898.752237] RSP [ 898.752237] CR2: fffffffffffffff8 [ 898.752237] ---[ end trace 3f7af50285edb7bc ]--- [ 898.752237] Fixing recursive fault but reboot is needed! [ 912.746625] xen_bridge: port 1(vif1.0) entered forwarding state