[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc2-20130722-jens (root@serveerstertje) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP PREEMPT Mon Jul 22 15:00:01 CEST 2013 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb acpi_enforce_resources=lax r8169.use_dac=1 max_loop=50 loop_max_part=10 xen-pciback.hide=(03:06.0)(04:00.*)(06:01.*)(07:00.*)(08:00.*)(0c:00.*) debug loglevel=10 [ 0.000000] Freeing 9f-100 pfn range: 97 pages freed [ 0.000000] 1-1 mapping on 9f->100 [ 0.000000] 1-1 mapping on 9ff90->100000 [ 0.000000] Released 97 pages of unused memory [ 0.000000] Set 393425 page(s) to 1-1 mapping [ 0.000000] Populating 60000-60061 pfn range: 97 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000060060fff] usable [ 0.000000] Xen: [mem 0x0000000060061000-0x000000009ff8ffff] unusable [ 0.000000] Xen: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data [ 0.000000] Xen: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS [ 0.000000] Xen: [mem 0x000000009ffe0000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000055fffffff] unusable [ 0.000000] ERROR: earlyprintk= xenboot already used [ 0.000000] e820: remove [mem 0x60000000-0xfffffffffffffffe] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: user-defined physical RAM map: [ 0.000000] user: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] user: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] user: [mem 0x0000000000100000-0x000000005fffffff] usable [ 0.000000] user: [mem 0x0000000060061000-0x000000009ff8ffff] unusable [ 0.000000] user: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data [ 0.000000] user: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS [ 0.000000] user: [mem 0x000000009ffe0000-0x000000009fffffff] reserved [ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] user: [mem 0x0000000100000000-0x000000055fffffff] unusable [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffffff] [ 0.000000] [mem 0x5fe00000-0x5fffffff] page 4k [ 0.000000] BRK [0x02d7a000, 0x02d7afff] PGTABLE [ 0.000000] BRK [0x02d7b000, 0x02d7bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5fdfffff] [ 0.000000] [mem 0x5c000000-0x5fdfffff] page 4k [ 0.000000] BRK [0x02d7c000, 0x02d7cfff] PGTABLE [ 0.000000] BRK [0x02d7d000, 0x02d7dfff] PGTABLE [ 0.000000] BRK [0x02d7e000, 0x02d7efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff] [ 0.000000] [mem 0x00100000-0x5bffffff] page 4k [ 0.000000] RAMDISK: [mem 0x03186000-0x03f4ffff] [ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000009ff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: FACP 000000009ff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000009ff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 000000009ff9e000 00040 [ 0.000000] ACPI: APIC 000000009ff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000009ff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097) [ 0.000000] ACPI: SLIC 000000009ff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000009ff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: SRAT 000000009ff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 000000009ff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097) [ 0.000000] ACPI: IVRS 000000009ff9a730 00108 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 000000009ff9a840 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff] [ 0.000000] NODE_DATA [mem 0x5fd1b000-0x5fd25fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x5fffffff] [ 0.000000] On node 0 totalpages: 393118 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6080 pages used for memmap [ 0.000000] DMA32 zone: 389120 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] e820: [mem 0xa0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.4-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005f600000 s83328 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s83328 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 8.197616] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386953 [ 8.197618] Policy zone: DMA32 [ 8.197626] Kernel command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb acpi_enforce_resources=lax r8169.use_dac=1 max_loop=50 loop_max_part=10 xen-pciback.hide=(03:06.0)(04:00.*)(06:01.*)(07:00.*)(08:00.*)(0c:00.*) debug loglevel=10 [ 8.197829] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 8.244023] software IO TLB [mem 0x59c00000-0x5dc00000] (64MB) mapped at [ffff880059c00000-ffff88005dbfffff] [ 8.253001] Memory: 1430416K/1572472K available (10473K kernel code, 978K rwdata, 4192K rodata, 1068K init, 9580K bss, 142056K reserved) [ 8.253333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 8.253394] Preemptible hierarchical RCU implementation. [ 8.253395] RCU dyntick-idle grace-period acceleration is enabled. [ 8.253396] Additional per-CPU info printed with stalls. [ 8.253397] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 8.253445] NR_IRQS:4352 nr_irqs:1272 16 [ 8.253584] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 8.253587] xen: registering gsi 9 triggering 0 polarity 1 [ 8.253621] xen: --> pirq=9 -> irq=9 (gsi=9) [ 8.253643] xen: acpi sci 9 [ 8.253650] xen: --> pirq=1 -> irq=1 (gsi=1) [ 8.253657] xen: --> pirq=2 -> irq=2 (gsi=2) [ 8.253663] xen: --> pirq=3 -> irq=3 (gsi=3) [ 8.253669] xen: --> pirq=4 -> irq=4 (gsi=4) [ 8.253676] xen: --> pirq=5 -> irq=5 (gsi=5) [ 8.253682] xen: --> pirq=6 -> irq=6 (gsi=6) [ 8.253688] xen: --> pirq=7 -> irq=7 (gsi=7) [ 8.253694] xen: --> pirq=8 -> irq=8 (gsi=8) [ 8.253701] xen: --> pirq=10 -> irq=10 (gsi=10) [ 8.253707] xen: --> pirq=11 -> irq=11 (gsi=11) [ 8.253713] xen: --> pirq=12 -> irq=12 (gsi=12) [ 8.253722] xen: --> pirq=13 -> irq=13 (gsi=13) [ 8.253729] xen: --> pirq=14 -> irq=14 (gsi=14) [ 8.253735] xen: --> pirq=15 -> irq=15 (gsi=15) [ 8.253894] Console: colour dummy device 80x25 [ 8.255315] console [tty0] enabled [ 8.255606] console [hvc0] enabled [ 8.255612] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 8.255618] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 8.255621] ... MAX_LOCK_DEPTH: 48 [ 8.255625] ... MAX_LOCKDEP_KEYS: 8191 [ 8.255629] ... CLASSHASH_SIZE: 4096 [ 8.255632] ... MAX_LOCKDEP_ENTRIES: 16384 [ 8.255636] ... MAX_LOCKDEP_CHAINS: 32768 [ 8.255639] ... CHAINHASH_SIZE: 16384 [ 8.255643] memory used by lock dependency info: 5855 kB [ 8.255647] per task-struct memory footprint: 1920 bytes [ 8.255651] kmemleak: Kernel memory leak detector disabled [ 8.255719] Xen: using vcpuop timer interface [ 8.255727] installing Xen timer for CPU 0 [ 8.255791] tsc: Detected 3200.166 MHz processor [ 8.255799] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.01 BogoMIPS (lpj=10667220) [ 8.255809] pid_max: default: 32768 minimum: 301 [ 8.256232] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 8.256961] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 8.257259] Mount-cache hash table entries: 256 [ 8.257930] Initializing cgroup subsys freezer [ 8.257956] Initializing cgroup subsys blkio [ 8.258021] tseg: 0000000000 [ 8.258062] CPU: Physical Processor ID: 0 [ 8.258066] CPU: Processor Core ID: 0 [ 8.258071] mce: CPU supports 2 MCE banks [ 8.258085] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 8.258085] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 8.258085] tlb_flushall_shift: 4 [ 8.258205] Freeing SMP alternatives memory: 32K (ffffffff82401000 - ffffffff82409000) [ 8.258883] ACPI: Core revision 20130517 [ 8.263849] ACPI: All ACPI Tables successfully acquired [ 8.266394] Performance Events: Broken PMU hardware detected, using software events only. [ 8.266418] Failed to access perfctr msr (MSR c0010004 is 0) [ 8.290319] NMI watchdog: disabled (cpu0): hardware events not enabled [ 8.297361] installing Xen timer for CPU 1 [ 8.297476] SMP alternatives: lockdep: fixing up alternatives [ 8.304134] installing Xen timer for CPU 2 [ 8.311023] installing Xen timer for CPU 3 [ 8.314480] installing Xen timer for CPU 4 [ 8.321398] installing Xen timer for CPU 5 [ 8.321731] Brought up 6 CPUs [ 8.322739] devtmpfs: initialized [ 8.324602] xor: measuring software checksum speed [ 8.355111] prefetch64-sse: 5578.800 MB/sec [ 8.388977] generic_sse: 5602.800 MB/sec [ 8.388982] xor: using function: generic_sse (5602.800 MB/sec) [ 8.388997] xen:grant_table: Grant tables using version 2 layout [ 8.389015] Grant table initialized [ 8.389173] NET: Registered protocol family 16 [ 8.391002] node 0 link 0: io port [1000, ffffff] [ 8.391010] TOM: 00000000a0000000 aka 2560M [ 8.391016] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 8.391024] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 8.391031] node 0 link 0: mmio [f0000000, ffffffff] [ 8.391038] node 0 link 0: mmio [a0000, bffff] [ 8.391044] node 0 link 0: mmio [a0000000, dfffffff] [ 8.391050] TOM2: 0000000560000000 aka 22016M [ 8.391054] bus: [bus 00-07] on node 0 link 0 [ 8.391059] bus: 00 [io 0x0000-0xffff] [ 8.391062] bus: 00 [mem 0xf0000000-0xffffffff] [ 8.391066] bus: 00 [mem 0x000a0000-0x000bffff] [ 8.391070] bus: 00 [mem 0xa0000000-0xdfffffff] [ 8.391074] bus: 00 [mem 0x560000000-0xfcffffffff] [ 8.391401] ACPI: bus type PCI registered [ 8.391408] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 8.392547] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 8.392557] PCI: not using MMCONFIG [ 8.392561] PCI: Using configuration type 1 for base access [ 8.392565] PCI: Using configuration type 1 for extended access [ 8.435396] bio: create slab at 0 [ 8.491628] raid6: sse2x1 3125 MB/s [ 8.549684] raid6: sse2x2 4175 MB/s [ 8.607734] raid6: sse2x4 4020 MB/s [ 8.607739] raid6: using algorithm sse2x2 (4175 MB/s) [ 8.607744] raid6: using intx1 recovery algorithm [ 8.608182] ACPI: Added _OSI(Module Device) [ 8.608188] ACPI: Added _OSI(Processor Device) [ 8.608194] ACPI: Added _OSI(3.0 _SCP Extensions) [ 8.608199] ACPI: Added _OSI(Processor Aggregator Device) [ 8.611550] ACPI: EC: Look up EC in DSDT [ 8.615129] ACPI: Executed 3 blocks of module-level executable AML code [ 8.635218] ACPI: Interpreter enabled [ 8.635235] ACPI: (supports S0 S5) [ 8.635240] ACPI: Using IOAPIC for interrupt routing [ 8.635287] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 8.637196] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 8.672991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 8.815449] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 8.816387] PCI host bridge to bus 0000:00 [ 8.816395] pci_bus 0000:00: root bus resource [bus 00-ff] [ 8.816401] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 8.816415] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 8.816421] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 8.816427] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 8.816433] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff] [ 8.816439] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 8.816454] pci_bus 0000:00: scanning bus [ 8.816504] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000 [ 8.816515] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 [ 8.816947] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 8.817263] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 8.817371] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 8.817409] pci 0000:00:02.0: PME# disabled [ 8.817478] pci 0000:00:02.0: System wakeup disabled by ACPI [ 8.817917] pci 0000:00:03.0: [1002:5a17] type 01 class 0x060400 [ 8.818021] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 8.818030] pci 0000:00:03.0: PME# disabled [ 8.818086] pci 0000:00:03.0: System wakeup disabled by ACPI [ 8.818277] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 8.818371] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 8.818379] pci 0000:00:05.0: PME# disabled [ 8.818434] pci 0000:00:05.0: System wakeup disabled by ACPI [ 8.818633] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 8.818726] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 8.818734] pci 0000:00:06.0: PME# disabled [ 8.818792] pci 0000:00:06.0: System wakeup disabled by ACPI [ 8.819016] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 8.819119] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 8.819128] pci 0000:00:09.0: PME# disabled [ 8.819199] pci 0000:00:09.0: System wakeup disabled by ACPI [ 8.819579] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 8.819681] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 8.819689] pci 0000:00:0a.0: PME# disabled [ 8.819770] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 8.820041] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400 [ 8.820145] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 8.820154] pci 0000:00:0b.0: PME# disabled [ 8.820238] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 8.820408] pci 0000:00:0c.0: [1002:5a20] type 01 class 0x060400 [ 8.820502] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold [ 8.820509] pci 0000:00:0c.0: PME# disabled [ 8.820586] pci 0000:00:0c.0: System wakeup disabled by ACPI [ 8.820807] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400 [ 8.820909] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 8.820918] pci 0000:00:0d.0: PME# disabled [ 8.821002] pci 0000:00:0d.0: System wakeup disabled by ACPI [ 8.821347] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 8.821370] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x10 [ 8.821393] pci 0000:00:11.0: reg 0x10: [io 0x6000-0x6007] [ 8.821410] pci 0000:00:11.0: reg 0x14: [io 0x5000-0x5003] [ 8.821428] pci 0000:00:11.0: reg 0x18: [io 0x3000-0x3007] [ 8.821445] pci 0000:00:11.0: reg 0x1c: [io 0x2000-0x2003] [ 8.821462] pci 0000:00:11.0: reg 0x20: [io 0x1000-0x100f] [ 8.821479] pci 0000:00:11.0: reg 0x24: [mem 0xf95ff000-0xf95ff3ff] [ 8.821504] pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xd0 [ 8.821520] pci 0000:00:11.0: set SATA to AHCI mode [ 8.821876] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 8.821898] pci 0000:00:12.0: reg 0x10: [mem 0xf95fb000-0xf95fbfff] [ 8.822055] pci 0000:00:12.0: System wakeup disabled by ACPI [ 8.822258] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 8.822289] pci 0000:00:12.2: reg 0x10: [mem 0xf95ff400-0xf95ff4ff] [ 8.822410] pci 0000:00:12.2: supports D1 D2 [ 8.822414] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 8.822422] pci 0000:00:12.2: PME# disabled [ 8.822512] pci 0000:00:12.2: System wakeup disabled by ACPI [ 8.822714] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 8.822737] pci 0000:00:13.0: reg 0x10: [mem 0xf95fc000-0xf95fcfff] [ 8.822901] pci 0000:00:13.0: System wakeup disabled by ACPI [ 8.823104] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 8.823149] pci 0000:00:13.2: reg 0x10: [mem 0xf95ff800-0xf95ff8ff] [ 8.823296] pci 0000:00:13.2: supports D1 D2 [ 8.823301] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 8.823310] pci 0000:00:13.2: PME# disabled [ 8.823421] pci 0000:00:13.2: System wakeup disabled by ACPI [ 8.823761] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 8.823773] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x50 [ 8.823872] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x10 [ 8.824080] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 8.824089] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x10 [ 8.824109] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 8.824125] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 8.824141] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 8.824158] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 8.824174] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f] [ 8.824464] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 8.824995] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 8.825134] pci 0000:00:14.4: System wakeup disabled by ACPI [ 8.825316] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 8.825339] pci 0000:00:14.5: reg 0x10: [mem 0xf95fd000-0xf95fdfff] [ 8.825514] pci 0000:00:14.5: System wakeup disabled by ACPI [ 8.825720] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 8.825839] pci 0000:00:15.0: supports D1 D2 [ 8.825958] pci 0000:00:15.0: System wakeup disabled by ACPI [ 8.826300] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 8.826325] pci 0000:00:16.0: reg 0x10: [mem 0xf95fe000-0xf95fefff] [ 8.826511] pci 0000:00:16.0: System wakeup disabled by ACPI [ 8.826757] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 8.826788] pci 0000:00:16.2: reg 0x10: [mem 0xf95ffc00-0xf95ffcff] [ 8.826909] pci 0000:00:16.2: supports D1 D2 [ 8.826913] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 8.826922] pci 0000:00:16.2: PME# disabled [ 8.827024] pci 0000:00:16.2: System wakeup disabled by ACPI [ 8.827240] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 8.827248] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 [ 8.827761] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 8.827770] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 [ 8.828087] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 8.828095] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 [ 8.828684] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 8.828695] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 [ 8.829041] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 8.829049] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 [ 8.829389] pci_bus 0000:00: fixups for bus [ 8.829396] pci 0000:00:02.0: scanning [bus 0d-0d] behind bridge, pass 0 [ 8.829570] pci_bus 0000:0d: scanning bus [ 8.829600] pci 0000:0d:00.0: [10de:06e4] type 00 class 0x030000 [ 8.829622] pci 0000:0d:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 8.829646] pci 0000:0d:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 8.829670] pci 0000:0d:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 8.829688] pci 0000:0d:00.0: reg 0x24: [io 0xe800-0xe87f] [ 8.829705] pci 0000:0d:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref] [ 8.836968] pci_bus 0000:0d: fixups for bus [ 8.836976] pci 0000:00:02.0: PCI bridge to [bus 0d] [ 8.836986] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 8.836994] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 8.837004] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 8.837010] pci_bus 0000:0d: bus scan returning with max=0d [ 8.837018] pci 0000:00:03.0: scanning [bus 0c-0c] behind bridge, pass 0 [ 8.837242] pci_bus 0000:0c: scanning bus [ 8.837266] pci 0000:0c:00.0: [1002:6759] type 00 class 0x030000 [ 8.837295] pci 0000:0c:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 8.837319] pci 0000:0c:00.0: reg 0x18: [mem 0xf9fc0000-0xf9fdffff 64bit] [ 8.837336] pci 0000:0c:00.0: reg 0x20: [io 0xd000-0xd0ff] [ 8.837363] pci 0000:0c:00.0: reg 0x30: [mem 0xf9fa0000-0xf9fbffff pref] [ 8.837429] pci 0000:0c:00.0: supports D1 D2 [ 8.837643] pci 0000:0c:00.1: [1002:aa90] type 00 class 0x040300 [ 8.837672] pci 0000:0c:00.1: reg 0x10: [mem 0xf9ffc000-0xf9ffffff 64bit] [ 8.837793] pci 0000:0c:00.1: supports D1 D2 [ 8.847283] pci_bus 0000:0c: fixups for bus [ 8.847290] pci 0000:00:03.0: PCI bridge to [bus 0c] [ 8.847300] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 8.847307] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 8.847317] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 8.847324] pci_bus 0000:0c: bus scan returning with max=0c [ 8.847332] pci 0000:00:05.0: scanning [bus 0b-0b] behind bridge, pass 0 [ 8.847606] pci_bus 0000:0b: scanning bus [ 8.847642] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000 [ 8.847668] pci 0000:0b:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 8.847708] pci 0000:0b:00.0: reg 0x18: [mem 0xbffff000-0xbfffffff 64bit pref] [ 8.847736] pci 0000:0b:00.0: reg 0x20: [mem 0xbfff8000-0xbfffbfff 64bit pref] [ 8.847757] pci 0000:0b:00.0: reg 0x30: [mem 0xf9ee0000-0xf9efffff pref] [ 8.847846] pci 0000:0b:00.0: supports D1 D2 [ 8.847851] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.847862] pci 0000:0b:00.0: PME# disabled [ 8.854166] pci_bus 0000:0b: fixups for bus [ 8.854173] pci 0000:00:05.0: PCI bridge to [bus 0b] [ 8.854183] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 8.854190] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 8.854200] pci 0000:00:05.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref] [ 8.854206] pci_bus 0000:0b: bus scan returning with max=0b [ 8.854214] pci 0000:00:06.0: scanning [bus 0a-0a] behind bridge, pass 0 [ 8.854481] pci_bus 0000:0a: scanning bus [ 8.854513] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000 [ 8.854538] pci 0000:0a:00.0: reg 0x10: [io 0xb800-0xb8ff] [ 8.854578] pci 0000:0a:00.0: reg 0x18: [mem 0xbfeff000-0xbfefffff 64bit pref] [ 8.854605] pci 0000:0a:00.0: reg 0x20: [mem 0xbfef8000-0xbfefbfff 64bit pref] [ 8.854625] pci 0000:0a:00.0: reg 0x30: [mem 0xf9de0000-0xf9dfffff pref] [ 8.854714] pci 0000:0a:00.0: supports D1 D2 [ 8.854719] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.854729] pci 0000:0a:00.0: PME# disabled [ 8.861049] pci_bus 0000:0a: fixups for bus [ 8.861079] pci 0000:00:06.0: PCI bridge to [bus 0a] [ 8.861119] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 8.861151] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] [ 8.861172] pci 0000:00:06.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref] [ 8.861178] pci_bus 0000:0a: bus scan returning with max=0a [ 8.861186] pci 0000:00:09.0: scanning [bus 09-09] behind bridge, pass 0 [ 8.861453] pci_bus 0000:09: scanning bus [ 8.861487] pci 0000:09:00.0: [1033:0194] type 00 class 0x0c0330 [ 8.861519] pci 0000:09:00.0: reg 0x10: [mem 0xf9cfe000-0xf9cfffff 64bit] [ 8.861661] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 8.861671] pci 0000:09:00.0: PME# disabled [ 8.867930] pci_bus 0000:09: fixups for bus [ 8.867938] pci 0000:00:09.0: PCI bridge to [bus 09] [ 8.867950] pci 0000:00:09.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 8.867959] pci_bus 0000:09: bus scan returning with max=09 [ 8.867967] pci 0000:00:0a.0: scanning [bus 08-08] behind bridge, pass 0 [ 8.868242] pci_bus 0000:08: scanning bus [ 8.868269] pci 0000:08:00.0: [14f1:8210] type 00 class 0x040000 [ 8.868307] pci 0000:08:00.0: reg 0x10: [mem 0xf9a00000-0xf9bfffff 64bit] [ 8.868490] pci 0000:08:00.0: supports D1 D2 [ 8.868495] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot [ 8.868505] pci 0000:08:00.0: PME# disabled [ 8.874812] pci_bus 0000:08: fixups for bus [ 8.874820] pci 0000:00:0a.0: PCI bridge to [bus 08] [ 8.874832] pci 0000:00:0a.0: bridge window [mem 0xf9a00000-0xf9bfffff] [ 8.874842] pci_bus 0000:08: bus scan returning with max=08 [ 8.874850] pci 0000:00:0b.0: scanning [bus 07-07] behind bridge, pass 0 [ 8.875120] pci_bus 0000:07: scanning bus [ 8.875146] pci 0000:07:00.0: [1002:6759] type 00 class 0x030000 [ 8.875178] pci 0000:07:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 8.875204] pci 0000:07:00.0: reg 0x18: [mem 0xf99c0000-0xf99dffff 64bit] [ 8.875222] pci 0000:07:00.0: reg 0x20: [io 0xa000-0xa0ff] [ 8.875252] pci 0000:07:00.0: reg 0x30: [mem 0xf99a0000-0xf99bffff pref] [ 8.875322] pci 0000:07:00.0: supports D1 D2 [ 8.875630] pci 0000:07:00.1: [1002:aa90] type 00 class 0x040300 [ 8.875661] pci 0000:07:00.1: reg 0x10: [mem 0xf99fc000-0xf99fffff 64bit] [ 8.875797] pci 0000:07:00.1: supports D1 D2 [ 8.885137] pci_bus 0000:07: fixups for bus [ 8.885144] pci 0000:00:0b.0: PCI bridge to [bus 07] [ 8.885154] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 8.885161] pci 0000:00:0b.0: bridge window [mem 0xf9900000-0xf99fffff] [ 8.885171] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 8.885177] pci_bus 0000:07: bus scan returning with max=07 [ 8.885185] pci 0000:00:0c.0: scanning [bus 05-06] behind bridge, pass 0 [ 8.885420] pci_bus 0000:05: scanning bus [ 8.885456] pci 0000:05:00.0: [104c:8231] type 01 class 0x060400 [ 8.885627] pci 0000:05:00.0: supports D1 D2 [ 8.885993] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 8.886008] pci_bus 0000:05: fixups for bus [ 8.886013] pci 0000:00:0c.0: PCI bridge to [bus 05-06] [ 8.886027] pci 0000:00:0c.0: bridge window [mem 0xf9800000-0xf98fffff] [ 8.886040] pci 0000:05:00.0: scanning [bus 06-06] behind bridge, pass 0 [ 8.886240] pci_bus 0000:06: scanning bus [ 8.886267] pci 0000:06:01.0: [1033:0035] type 00 class 0x0c0310 [ 8.886305] pci 0000:06:01.0: reg 0x10: [mem 0xf98fd000-0xf98fdfff] [ 8.886464] pci 0000:06:01.0: supports D1 D2 [ 8.886469] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot [ 8.886480] pci 0000:06:01.0: PME# disabled [ 8.886901] pci 0000:06:01.1: [1033:0035] type 00 class 0x0c0310 [ 8.886940] pci 0000:06:01.1: reg 0x10: [mem 0xf98fe000-0xf98fefff] [ 8.887097] pci 0000:06:01.1: supports D1 D2 [ 8.887102] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot [ 8.887113] pci 0000:06:01.1: PME# disabled [ 8.887299] pci 0000:06:01.2: [1033:00e0] type 00 class 0x0c0320 [ 8.887336] pci 0000:06:01.2: reg 0x10: [mem 0xf98ffc00-0xf98ffcff] [ 8.887486] pci 0000:06:01.2: supports D1 D2 [ 8.887490] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot [ 8.887500] pci 0000:06:01.2: PME# disabled [ 8.887769] pci_bus 0000:06: fixups for bus [ 8.887774] pci 0000:05:00.0: PCI bridge to [bus 06] [ 8.887791] pci 0000:05:00.0: bridge window [mem 0xf9800000-0xf98fffff] [ 8.887804] pci_bus 0000:06: bus scan returning with max=06 [ 8.887814] pci 0000:05:00.0: scanning [bus 06-06] behind bridge, pass 1 [ 8.887825] pci_bus 0000:05: bus scan returning with max=06 [ 8.887832] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 0 [ 8.888047] pci_bus 0000:04: scanning bus [ 8.888077] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 8.888105] pci 0000:04:00.0: reg 0x10: [mem 0xf97fe000-0xf97fffff 64bit] [ 8.888233] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 8.888242] pci 0000:04:00.0: PME# disabled [ 8.895423] pci_bus 0000:04: fixups for bus [ 8.895430] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 8.895443] pci 0000:00:0d.0: bridge window [mem 0xf9700000-0xf97fffff] [ 8.895453] pci_bus 0000:04: bus scan returning with max=04 [ 8.895461] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0 [ 8.895909] pci_bus 0000:03: scanning bus [ 8.896029] pci 0000:03:06.0: [13f6:0111] type 00 class 0x040100 [ 8.896100] pci 0000:03:06.0: reg 0x10: [io 0x9800-0x98ff] [ 8.896243] pci 0000:03:06.0: supports D1 D2 [ 8.896511] pci_bus 0000:03: fixups for bus [ 8.896517] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 8.896527] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff] [ 8.896540] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 8.896547] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 8.896554] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 8.896562] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 8.896569] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xdfffffff] (subtractive decode) [ 8.896577] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 8.896585] pci_bus 0000:03: bus scan returning with max=03 [ 8.896595] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 0 [ 8.896803] pci_bus 0000:02: scanning bus [ 8.896811] pci_bus 0000:02: fixups for bus [ 8.896816] pci 0000:00:15.0: PCI bridge to [bus 02] [ 8.896837] pci_bus 0000:02: bus scan returning with max=02 [ 8.896848] pci 0000:00:02.0: scanning [bus 0d-0d] behind bridge, pass 1 [ 8.896859] pci 0000:00:03.0: scanning [bus 0c-0c] behind bridge, pass 1 [ 8.896870] pci 0000:00:05.0: scanning [bus 0b-0b] behind bridge, pass 1 [ 8.896881] pci 0000:00:06.0: scanning [bus 0a-0a] behind bridge, pass 1 [ 8.896892] pci 0000:00:09.0: scanning [bus 09-09] behind bridge, pass 1 [ 8.896903] pci 0000:00:0a.0: scanning [bus 08-08] behind bridge, pass 1 [ 8.896914] pci 0000:00:0b.0: scanning [bus 07-07] behind bridge, pass 1 [ 8.896925] pci 0000:00:0c.0: scanning [bus 05-06] behind bridge, pass 1 [ 8.896936] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 1 [ 8.896950] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1 [ 8.896963] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 1 [ 8.896973] pci_bus 0000:00: bus scan returning with max=0d [ 8.897139] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d) [ 8.897403] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted [ 8.944484] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 8.944609] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 8.944734] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 8.944864] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 8.944996] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) [ 8.945092] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) [ 8.945187] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 8.945282] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) [ 8.946060] ACPI: \_SB_.PCI0: notify handler is installed [ 8.946177] Found 1 acpi root devices [ 8.946511] xen:balloon: Initialising balloon driver [ 8.946899] xen_balloon: Initialising balloon driver [ 8.948012] vgaarb: device added: PCI:0000:0d:00.0,decodes=io+mem,owns=io+mem,locks=none [ 8.948027] vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=none,locks=none [ 8.948040] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=none,locks=none [ 8.948050] vgaarb: loaded [ 8.948053] vgaarb: bridge control possible 0000:07:00.0 [ 8.948057] vgaarb: bridge control possible 0000:0c:00.0 [ 8.948061] vgaarb: bridge control possible 0000:0d:00.0 [ 8.948615] SCSI subsystem initialized [ 8.948621] ACPI: bus type ATA registered [ 8.948881] libata version 3.00 loaded. [ 8.949127] ACPI: bus type USB registered [ 8.949297] usbcore: registered new interface driver usbfs [ 8.949384] usbcore: registered new interface driver hub [ 8.949516] usbcore: registered new device driver usb [ 8.949749] Linux video capture interface: v2.00 [ 8.950082] pps_core: LinuxPPS API ver. 1 registered [ 8.950088] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 8.950178] PTP clock support registered [ 8.950688] Advanced Linux Sound Architecture Driver Initialized. [ 8.950694] PCI: Using ACPI for IRQ routing [ 8.961464] PCI: pci_cache_line_size set to 64 bytes [ 8.961485] pci 0000:0d:00.0: BAR 0: reserving [mem 0xfd000000-0xfdffffff flags 0x40200] (d=0, p=0) [ 8.961493] pci 0000:0d:00.0: BAR 1: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0) [ 8.961500] pci 0000:0d:00.0: BAR 3: reserving [mem 0xfa000000-0xfbffffff flags 0x140204] (d=0, p=0) [ 8.961508] pci 0000:0d:00.0: BAR 5: reserving [io 0xe800-0xe87f flags 0x40101] (d=0, p=0) [ 8.961519] pci 0000:0c:00.1: BAR 0: reserving [mem 0xf9ffc000-0xf9ffffff flags 0x140204] (d=0, p=0) [ 8.961530] pci 0000:0b:00.0: BAR 0: reserving [io 0xc800-0xc8ff flags 0x40101] (d=0, p=0) [ 8.961536] pci 0000:0b:00.0: BAR 2: reserving [mem 0xbffff000-0xbfffffff flags 0x14220c] (d=0, p=0) [ 8.961544] pci 0000:0b:00.0: BAR 4: reserving [mem 0xbfff8000-0xbfffbfff flags 0x14220c] (d=0, p=0) [ 8.961554] pci 0000:0a:00.0: BAR 0: reserving [io 0xb800-0xb8ff flags 0x40101] (d=0, p=0) [ 8.961561] pci 0000:0a:00.0: BAR 2: reserving [mem 0xbfeff000-0xbfefffff flags 0x14220c] (d=0, p=0) [ 8.961568] pci 0000:0a:00.0: BAR 4: reserving [mem 0xbfef8000-0xbfefbfff flags 0x14220c] (d=0, p=0) [ 8.961578] pci 0000:09:00.0: BAR 0: reserving [mem 0xf9cfe000-0xf9cfffff flags 0x140204] (d=0, p=0) [ 8.961588] pci 0000:08:00.0: BAR 0: reserving [mem 0xf9a00000-0xf9bfffff flags 0x140204] (d=0, p=0) [ 8.961600] pci 0000:07:00.1: BAR 0: reserving [mem 0xf99fc000-0xf99fffff flags 0x140204] (d=0, p=0) [ 8.961614] pci 0000:06:01.0: BAR 0: reserving [mem 0xf98fd000-0xf98fdfff flags 0x40200] (d=0, p=0) [ 8.961623] pci 0000:06:01.1: BAR 0: reserving [mem 0xf98fe000-0xf98fefff flags 0x40200] (d=0, p=0) [ 8.961633] pci 0000:06:01.2: BAR 0: reserving [mem 0xf98ffc00-0xf98ffcff flags 0x40200] (d=0, p=0) [ 8.961643] pci 0000:04:00.0: BAR 0: reserving [mem 0xf97fe000-0xf97fffff flags 0x140204] (d=0, p=0) [ 8.961652] pci 0000:00:11.0: BAR 0: reserving [io 0x6000-0x6007 flags 0x40101] (d=0, p=0) [ 8.961659] pci 0000:00:11.0: BAR 1: reserving [io 0x5000-0x5003 flags 0x40101] (d=0, p=0) [ 8.961665] pci 0000:00:11.0: BAR 2: reserving [io 0x3000-0x3007 flags 0x40101] (d=0, p=0) [ 8.961672] pci 0000:00:11.0: BAR 3: reserving [io 0x2000-0x2003 flags 0x40101] (d=0, p=0) [ 8.961678] pci 0000:00:11.0: BAR 4: reserving [io 0x1000-0x100f flags 0x40101] (d=0, p=0) [ 8.961685] pci 0000:00:11.0: BAR 5: reserving [mem 0xf95ff000-0xf95ff3ff flags 0x40200] (d=0, p=0) [ 8.961696] pci 0000:00:12.0: BAR 0: reserving [mem 0xf95fb000-0xf95fbfff flags 0x40200] (d=0, p=0) [ 8.961705] pci 0000:00:12.2: BAR 0: reserving [mem 0xf95ff400-0xf95ff4ff flags 0x40200] (d=0, p=0) [ 8.961714] pci 0000:00:13.0: BAR 0: reserving [mem 0xf95fc000-0xf95fcfff flags 0x40200] (d=0, p=0) [ 8.961723] pci 0000:00:13.2: BAR 0: reserving [mem 0xf95ff800-0xf95ff8ff flags 0x40200] (d=0, p=0) [ 8.961734] pci 0000:00:14.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 8.961741] pci 0000:00:14.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 8.961747] pci 0000:00:14.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 8.961754] pci 0000:00:14.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 8.961760] pci 0000:00:14.1: BAR 4: reserving [io 0xff00-0xff0f flags 0x40101] (d=0, p=0) [ 8.961772] pci 0000:03:06.0: BAR 0: reserving [io 0x9800-0x98ff flags 0x40101] (d=0, p=0) [ 8.961781] pci 0000:00:14.5: BAR 0: reserving [mem 0xf95fd000-0xf95fdfff flags 0x40200] (d=0, p=0) [ 8.961791] pci 0000:00:16.0: BAR 0: reserving [mem 0xf95fe000-0xf95fefff flags 0x40200] (d=0, p=0) [ 8.961800] pci 0000:00:16.2: BAR 0: reserving [mem 0xf95ffc00-0xf95ffcff flags 0x40200] (d=0, p=0) [ 8.961821] pci 0000:0c:00.0: BAR 0: reserving [mem 0xc0000000-0xcfffffff flags 0x14220c] (d=1, p=1) [ 8.961828] pci 0000:0c:00.0: BAR 2: reserving [mem 0xf9fc0000-0xf9fdffff flags 0x140204] (d=1, p=1) [ 8.961836] pci 0000:0c:00.0: BAR 4: reserving [io 0xd000-0xd0ff flags 0x40101] (d=1, p=1) [ 8.961864] pci 0000:07:00.0: BAR 0: reserving [mem 0xa0000000-0xafffffff flags 0x14220c] (d=1, p=1) [ 8.961872] pci 0000:07:00.0: BAR 2: reserving [mem 0xf99c0000-0xf99dffff flags 0x140204] (d=1, p=1) [ 8.961879] pci 0000:07:00.0: BAR 4: reserving [io 0xa000-0xa0ff flags 0x40101] (d=1, p=1) [ 8.961933] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 8.962780] Bluetooth: Core ver 2.16 [ 8.962926] NET: Registered protocol family 31 [ 8.962931] Bluetooth: HCI device and connection manager initialized [ 8.962951] Bluetooth: HCI socket layer initialized [ 8.962958] Bluetooth: L2CAP socket layer initialized [ 8.962971] Bluetooth: SCO socket layer initialized [ 8.963314] Switched to clocksource xen [ 8.963567] FS-Cache: Loaded [ 8.963772] pnp: PnP ACPI init [ 8.963797] ACPI: bus type PNP registered [ 8.964324] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 8.964407] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 8.964806] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 8.964817] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.040314] pnp 00:02: [dma 4] [ 9.040527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 9.040550] xen: registering gsi 8 triggering 1 polarity 0 [ 9.040711] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 9.040911] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 9.040929] xen: registering gsi 13 triggering 1 polarity 0 [ 9.041074] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 9.041397] xen: registering gsi 4 triggering 1 polarity 0 [ 9.041403] Already setup the GSI :4 [ 9.041408] pnp 00:06: [dma 0 disabled] [ 9.041794] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 9.042110] system 00:07: [io 0x0600-0x06df] has been reserved [ 9.042117] system 00:07: [io 0x0ae0-0x0aef] has been reserved [ 9.042125] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.042268] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 9.042571] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 9.042579] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 9.042586] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.042996] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 9.043003] system 00:0a: [io 0x040b] has been reserved [ 9.043008] system 00:0a: [io 0x04d6] has been reserved [ 9.043014] system 00:0a: [io 0x0c00-0x0c01] has been reserved [ 9.043019] system 00:0a: [io 0x0c14] has been reserved [ 9.043024] system 00:0a: [io 0x0c50-0x0c51] has been reserved [ 9.043030] system 00:0a: [io 0x0c52] has been reserved [ 9.043035] system 00:0a: [io 0x0c6c] has been reserved [ 9.043040] system 00:0a: [io 0x0c6f] has been reserved [ 9.043045] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved [ 9.043050] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved [ 9.043056] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved [ 9.043061] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved [ 9.043067] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved [ 9.043073] system 00:0a: [io 0x0800-0x089f] could not be reserved [ 9.043078] system 00:0a: [io 0x0b00-0x0b1f] has been reserved [ 9.043084] system 00:0a: [io 0x0b20-0x0b3f] has been reserved [ 9.043089] system 00:0a: [io 0x0900-0x090f] has been reserved [ 9.043095] system 00:0a: [io 0x0910-0x091f] has been reserved [ 9.043101] system 00:0a: [io 0xfe00-0xfefe] has been reserved [ 9.043107] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved [ 9.043113] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved [ 9.043118] system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved [ 9.043126] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.043399] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 9.043408] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.043922] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 9.043932] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 9.043939] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 9.043946] system 00:0c: [mem 0x00100000-0x9fffffff] could not be reserved [ 9.043953] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 9.043962] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 9.044130] pnp: PnP ACPI: found 13 devices [ 9.044135] ACPI: bus type PNP unregistered [ 9.045637] pciback 0000:0c:00.0: seizing device [ 9.045696] pciback 0000:0c:00.1: seizing device [ 9.045842] pciback 0000:08:00.0: seizing device [ 9.045882] pciback 0000:07:00.0: seizing device [ 9.045921] pciback 0000:07:00.1: seizing device [ 9.045997] pciback 0000:06:01.0: seizing device [ 9.046036] pciback 0000:06:01.1: seizing device [ 9.046076] pciback 0000:06:01.2: seizing device [ 9.046115] pciback 0000:04:00.0: seizing device [ 9.046158] pciback 0000:03:06.0: seizing device [ 9.060786] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 9.060893] pci 0000:00:02.0: PCI bridge to [bus 0d] [ 9.060901] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 9.060909] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 9.060917] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 9.060932] pci 0000:00:03.0: PCI bridge to [bus 0c] [ 9.060938] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 9.060946] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 9.060954] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 9.060964] pci 0000:00:05.0: PCI bridge to [bus 0b] [ 9.060970] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 9.060978] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 9.060986] pci 0000:00:05.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref] [ 9.060996] pci 0000:00:06.0: PCI bridge to [bus 0a] [ 9.061002] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff] [ 9.061010] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] [ 9.061018] pci 0000:00:06.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref] [ 9.061028] pci 0000:00:09.0: PCI bridge to [bus 09] [ 9.061036] pci 0000:00:09.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 9.061048] pci 0000:00:0a.0: PCI bridge to [bus 08] [ 9.061055] pci 0000:00:0a.0: bridge window [mem 0xf9a00000-0xf9bfffff] [ 9.061067] pci 0000:00:0b.0: PCI bridge to [bus 07] [ 9.061073] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff] [ 9.061081] pci 0000:00:0b.0: bridge window [mem 0xf9900000-0xf99fffff] [ 9.061089] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 9.061099] pci 0000:05:00.0: PCI bridge to [bus 06] [ 9.061110] pci 0000:05:00.0: bridge window [mem 0xf9800000-0xf98fffff] [ 9.061127] pci 0000:00:0c.0: PCI bridge to [bus 05-06] [ 9.061135] pci 0000:00:0c.0: bridge window [mem 0xf9800000-0xf98fffff] [ 9.061147] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 9.061154] pci 0000:00:0d.0: bridge window [mem 0xf9700000-0xf97fffff] [ 9.061166] pci 0000:00:14.4: PCI bridge to [bus 03] [ 9.061172] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff] [ 9.061191] pci 0000:00:15.0: PCI bridge to [bus 02] [ 9.061353] xen: registering gsi 52 triggering 0 polarity 1 [ 9.061380] xen: --> pirq=52 -> irq=52 (gsi=52) [ 9.061520] xen: registering gsi 52 triggering 0 polarity 1 [ 9.061525] Already setup the GSI :52 [ 9.061651] xen: registering gsi 52 triggering 0 polarity 1 [ 9.061656] Already setup the GSI :52 [ 9.061781] xen: registering gsi 53 triggering 0 polarity 1 [ 9.061793] xen: --> pirq=53 -> irq=53 (gsi=53) [ 9.061926] xen: registering gsi 53 triggering 0 polarity 1 [ 9.061931] Already setup the GSI :53 [ 9.062056] xen: registering gsi 54 triggering 0 polarity 1 [ 9.062067] xen: --> pirq=54 -> irq=54 (gsi=54) [ 9.062199] xen: registering gsi 54 triggering 0 polarity 1 [ 9.062204] Already setup the GSI :54 [ 9.062330] xen: registering gsi 54 triggering 0 polarity 1 [ 9.062334] Already setup the GSI :54 [ 9.062466] xen: registering gsi 54 triggering 0 polarity 1 [ 9.062471] Already setup the GSI :54 [ 9.062606] xen: registering gsi 16 triggering 0 polarity 1 [ 9.062618] xen: --> pirq=16 -> irq=16 (gsi=16) [ 9.062633] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 9.062638] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 9.062643] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 9.062648] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 9.062653] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xdfffffff] [ 9.062657] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 9.062663] pci_bus 0000:0d: resource 0 [io 0xe000-0xefff] [ 9.062667] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfe9fffff] [ 9.062672] pci_bus 0000:0d: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 9.062678] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff] [ 9.062683] pci_bus 0000:0c: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 9.062688] pci_bus 0000:0c: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 9.062693] pci_bus 0000:0b: resource 0 [io 0xc000-0xcfff] [ 9.062698] pci_bus 0000:0b: resource 1 [mem 0xf9e00000-0xf9efffff] [ 9.062703] pci_bus 0000:0b: resource 2 [mem 0xbff00000-0xbfffffff 64bit pref] [ 9.062709] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 9.062716] pci_bus 0000:0a: resource 1 [mem 0xf9d00000-0xf9dfffff] [ 9.062721] pci_bus 0000:0a: resource 2 [mem 0xbfe00000-0xbfefffff 64bit pref] [ 9.062727] pci_bus 0000:09: resource 1 [mem 0xf9c00000-0xf9cfffff] [ 9.062732] pci_bus 0000:08: resource 1 [mem 0xf9a00000-0xf9bfffff] [ 9.062737] pci_bus 0000:07: resource 0 [io 0xa000-0xafff] [ 9.062741] pci_bus 0000:07: resource 1 [mem 0xf9900000-0xf99fffff] [ 9.062746] pci_bus 0000:07: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 9.062752] pci_bus 0000:05: resource 1 [mem 0xf9800000-0xf98fffff] [ 9.062757] pci_bus 0000:06: resource 1 [mem 0xf9800000-0xf98fffff] [ 9.062762] pci_bus 0000:04: resource 1 [mem 0xf9700000-0xf97fffff] [ 9.062768] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] [ 9.062772] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 9.062777] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 9.062782] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 9.062786] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 9.062792] pci_bus 0000:03: resource 8 [mem 0xa0000000-0xdfffffff] [ 9.062797] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 9.062853] NET: Registered protocol family 2 [ 9.063233] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 9.063548] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes) [ 9.064434] TCP: Hash tables configured (established 16384 bind 16384) [ 9.064508] TCP: reno registered [ 9.064538] UDP hash table entries: 1024 (order: 5, 163840 bytes) [ 9.064673] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes) [ 9.064963] NET: Registered protocol family 1 [ 9.065010] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50 [ 9.065027] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x6c0 [ 9.065172] xen: registering gsi 18 triggering 0 polarity 1 [ 9.065192] xen: --> pirq=18 -> irq=18 (gsi=18) [ 9.880381] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x6c0 [ 9.880514] xen: registering gsi 17 triggering 0 polarity 1 [ 9.880531] xen: --> pirq=17 -> irq=17 (gsi=17) [ 9.880693] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x6c0 [ 9.880821] xen: registering gsi 18 triggering 0 polarity 1 [ 9.880826] Already setup the GSI :18 [ 9.956993] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x6c0 [ 9.957121] xen: registering gsi 17 triggering 0 polarity 1 [ 9.957127] Already setup the GSI :17 [ 9.957286] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x6c0 [ 9.957414] xen: registering gsi 18 triggering 0 polarity 1 [ 9.957419] Already setup the GSI :18 [ 10.033675] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x6c0 [ 10.033807] xen: registering gsi 18 triggering 0 polarity 1 [ 10.033813] Already setup the GSI :18 [ 10.110339] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x6c0 [ 10.110467] xen: registering gsi 17 triggering 0 polarity 1 [ 10.110473] Already setup the GSI :17 [ 10.110624] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x70 [ 10.110635] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x70 [ 10.110644] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x70 [ 10.110653] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x70 [ 10.110662] pci 0000:00:18.4: calling quirk_amd_nb_node+0x0/0x70 [ 10.110672] pci 0000:0d:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x30 [ 10.110692] pci 0000:0d:00.0: calling pci_fixup_video+0x0/0xd0 [ 10.110702] pci 0000:0d:00.0: Boot video device [ 10.110713] pciback 0000:0c:00.0: calling pci_fixup_video+0x0/0xd0 [ 10.110752] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x6c0 [ 10.110793] xen: registering gsi 48 triggering 0 polarity 1 [ 10.110809] xen: --> pirq=48 -> irq=48 (gsi=48) [ 10.110878] pciback 0000:07:00.0: calling pci_fixup_video+0x0/0xd0 [ 10.110892] pci 0000:05:00.0: calling quirk_xio2000a+0x0/0x90 [ 10.110897] pci 0000:05:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled [ 10.110915] pciback 0000:06:01.0: calling quirk_usb_early_handoff+0x0/0x6c0 [ 10.110956] xen: registering gsi 37 triggering 0 polarity 1 [ 10.110969] xen: --> pirq=37 -> irq=37 (gsi=37) [ 10.111032] pciback 0000:06:01.1: calling quirk_usb_early_handoff+0x0/0x6c0 [ 10.111071] xen: registering gsi 38 triggering 0 polarity 1 [ 10.111083] xen: --> pirq=38 -> irq=38 (gsi=38) [ 10.111145] pciback 0000:06:01.2: calling quirk_usb_early_handoff+0x0/0x6c0 [ 10.111184] xen: registering gsi 39 triggering 0 polarity 1 [ 10.111196] xen: --> pirq=39 -> irq=39 (gsi=39) [ 10.111262] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x6c0 [ 10.111301] xen: registering gsi 40 triggering 0 polarity 1 [ 10.111312] xen: --> pirq=40 -> irq=40 (gsi=40) [ 10.111408] PCI: CLS 64 bytes, default 64 [ 10.111560] Trying to unpack rootfs image as initramfs... [ 10.141029] Freeing initrd memory: 14120K (ffff880003186000 - ffff880003f50000) [ 10.148675] DMA-API: preallocated 65536 debug entries [ 10.148688] DMA-API: debugging enabled by kernel config [ 10.153101] Scanning for low memory corruption every 60 seconds [ 10.155358] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 10.155365] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 10.155371] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 10.155376] AVX or AES-NI instructions are not detected. [ 10.155381] AVX instructions are not detected. [ 10.155385] AVX instructions are not detected. [ 10.156800] audit: initializing netlink socket (disabled) [ 10.156844] type=2000 audit(1374499095.135:1): initialized [ 10.157730] bounce pool size: 64 pages [ 10.157742] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 10.166298] VFS: Disk quotas dquot_6.5.2 [ 10.166472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 10.169537] NTFS driver 2.1.30 [Flags: R/W]. [ 10.170271] fuse init (API version 7.22) [ 10.171759] bio: create slab at 1 [ 10.172887] Btrfs loaded [ 10.174049] GFS2 installed [ 10.174451] ceph: loaded (mds proto 32) [ 10.174462] msgmni has been set to 2821 [ 10.176787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 10.176814] io scheduler noop registered [ 10.176818] io scheduler deadline registered [ 10.177089] io scheduler cfq registered (default) [ 10.178357] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 10.178362] crc32: self tests passed, processed 225944 bytes in 108659 nsec [ 10.178478] crc32c: CRC_LE_BITS = 64 [ 10.178482] crc32c: self tests passed, processed 225944 bytes in 54287 nsec [ 10.185157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.185558] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 10.185999] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.267961] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 10.268433] usbcore: registered new interface driver udlfb [ 10.268544] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 10.268550] vesafb: scrolling: redraw [ 10.268554] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 10.270255] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010580000, using 10240k, total 14336k [ 10.292563] Console: switching to colour frame buffer device 160x64 [ 10.313020] fb0: VESA VGA frame buffer device [ 10.313676] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 10.313916] ACPI: Power Button [PWRB] [ 10.314212] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 10.314395] ACPI: Power Button [PWRF] [ 10.316179] Warning: Processor Platform Limit not supported. [ 10.317771] xen:xen_evtchn: Event-channel device installed [ 10.318613] xen: registering gsi 22 triggering 0 polarity 1 [ 10.318790] xen: --> pirq=22 -> irq=22 (gsi=22) [ 10.343705] xen: registering gsi 40 triggering 0 polarity 1 [ 10.343844] Already setup the GSI :40 [ 10.550187] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 10.550428] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf97fe004) [ 10.550656] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 10.550871] pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100102) [ 10.551222] xen: registering gsi 39 triggering 0 polarity 1 [ 10.551358] Already setup the GSI :39 [ 10.576830] pciback 0000:06:01.2: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112) [ 10.577186] xen: registering gsi 38 triggering 0 polarity 1 [ 10.577323] Already setup the GSI :38 [ 10.603538] pciback 0000:06:01.1: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112) [ 10.603890] xen: registering gsi 37 triggering 0 polarity 1 [ 10.604026] Already setup the GSI :37 [ 10.630204] pciback 0000:06:01.0: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112) [ 10.630556] xen: registering gsi 33 triggering 0 polarity 1 [ 10.630732] xen: --> pirq=33 -> irq=33 (gsi=33) [ 10.656965] pciback 0000:07:00.0: enabling device (0000 -> 0003) [ 10.657145] xen: registering gsi 32 triggering 0 polarity 1 [ 10.657293] xen: --> pirq=32 -> irq=32 (gsi=32) [ 10.683671] xen: registering gsi 47 triggering 0 polarity 1 [ 10.683823] xen: --> pirq=47 -> irq=47 (gsi=47) [ 10.890067] pciback 0000:08:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 10.890328] pciback 0000:08:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf9a00004) [ 10.890559] pciback 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 10.897365] pciback 0000:08:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100106) [ 10.904334] xen: registering gsi 29 triggering 0 polarity 1 [ 10.911235] xen: --> pirq=29 -> irq=29 (gsi=29) [ 10.943625] pciback 0000:0c:00.0: enabling device (0000 -> 0003) [ 10.950624] xen: registering gsi 28 triggering 0 polarity 1 [ 10.957593] xen: --> pirq=28 -> irq=28 (gsi=28) [ 10.990525] xen_pciback: backend is vpci [ 10.998292] xen_acpi_processor: Uploading Xen processor PM info [ 11.007758] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 11.017714] hpet_acpi_add: no address or irqs in _CRS [ 11.025279] Linux agpgart interface v0.103 [ 11.034198] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 11.041353] Hangcheck: Using getrawmonotonic(). [ 11.048684] [drm] Initialized drm 1.1.0 20060810 [ 11.055953] [drm] VGACON disable radeon kernel modesetting. [ 11.062981] [drm:radeon_init] *ERROR* No UMS support in radeon module! [ 11.077304] brd: module loaded [ 11.109004] loop: module loaded [ 11.117098] ahci 0000:00:11.0: version 3.0 [ 11.124343] xen: registering gsi 19 triggering 0 polarity 1 [ 11.131303] xen: --> pirq=19 -> irq=19 (gsi=19) [ 11.138439] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 11.145523] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 11.155180] scsi0 : ahci [ 11.163457] scsi1 : ahci [ 11.170671] scsi2 : ahci [ 11.178066] scsi3 : ahci [ 11.184976] ata1: SATA max UDMA/133 abar m1024@0xf95ff000 port 0xf95ff100 irq 121 [ 11.191548] ata2: SATA max UDMA/133 abar m1024@0xf95ff000 port 0xf95ff180 irq 121 [ 11.198011] ata3: SATA max UDMA/133 abar m1024@0xf95ff000 port 0xf95ff200 irq 121 [ 11.204466] ata4: SATA max UDMA/133 abar m1024@0xf95ff000 port 0xf95ff280 irq 121 [ 11.211686] tun: Universal TUN/TAP device driver, 1.6 [ 11.217901] tun: (C) 1999-2004 Max Krasnyansky [ 11.224577] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 11.230906] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 11.237487] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 11.243765] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 11.250293] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k [ 11.256684] igb: Copyright (c) 2007-2013 Intel Corporation. [ 11.263315] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 11.269746] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 11.276431] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 11.282979] xen: registering gsi 46 triggering 0 polarity 1 [ 11.289317] xen: --> pirq=46 -> irq=46 (gsi=46) [ 11.295594] r8169 0000:0b:00.0: enabling Mem-Wr-Inval [ 11.302578] r8169 0000:0b:00.0 eth0: RTL8168d/8111d at 0xffffc90000336000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 122 [ 11.308925] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 11.315373] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 11.321758] xen: registering gsi 51 triggering 0 polarity 1 [ 11.327920] xen: --> pirq=51 -> irq=51 (gsi=51) [ 11.334120] r8169 0000:0a:00.0: enabling Mem-Wr-Inval [ 11.340861] r8169 0000:0a:00.0 eth1: RTL8168d/8111d at 0xffffc90000338000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 123 [ 11.347194] r8169 0000:0a:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 11.353884] xen_netfront: Initialising Xen virtual ethernet driver [ 11.361975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.368341] ehci-pci: EHCI PCI platform driver [ 11.374886] xen: registering gsi 17 triggering 0 polarity 1 [ 11.381320] Already setup the GSI :17 [ 11.387683] ehci-pci 0000:00:12.2: enabling bus mastering [ 11.394206] ehci-pci 0000:00:12.2: EHCI Host Controller [ 11.401188] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 11.407576] QUIRK: Enable AMD PLL fix [ 11.413858] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 11.420415] ehci-pci 0000:00:12.2: debug port 1 [ 11.426975] ehci-pci 0000:00:12.2: enabling Mem-Wr-Inval [ 11.433474] ehci-pci 0000:00:12.2: irq 17, io mem 0xf95ff400 [ 11.446889] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 11.453337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.459680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.466125] usb usb1: Product: EHCI Host Controller [ 11.472388] usb usb1: Manufacturer: Linux 3.11.0-rc2-20130722-jens ehci_hcd [ 11.478643] usb usb1: SerialNumber: 0000:00:12.2 [ 11.485927] hub 1-0:1.0: USB hub found [ 11.492178] hub 1-0:1.0: 5 ports detected [ 11.498901] xen: registering gsi 17 triggering 0 polarity 1 [ 11.505185] Already setup the GSI :17 [ 11.511380] ehci-pci 0000:00:13.2: enabling bus mastering [ 11.517680] ehci-pci 0000:00:13.2: EHCI Host Controller [ 11.524356] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 11.530634] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 11.536895] ehci-pci 0000:00:13.2: debug port 1 [ 11.540275] ata4: SATA link down (SStatus 0 SControl 300) [ 11.540336] ata2: SATA link down (SStatus 0 SControl 300) [ 11.555578] ehci-pci 0000:00:13.2: enabling Mem-Wr-Inval [ 11.561914] ehci-pci 0000:00:13.2: irq 17, io mem 0xf95ff800 [ 11.579316] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 11.585666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.592033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.598508] usb usb2: Product: EHCI Host Controller [ 11.605089] usb usb2: Manufacturer: Linux 3.11.0-rc2-20130722-jens ehci_hcd [ 11.611581] usb usb2: SerialNumber: 0000:00:13.2 [ 11.618671] hub 2-0:1.0: USB hub found [ 11.625174] hub 2-0:1.0: 5 ports detected [ 11.631866] xen: registering gsi 17 triggering 0 polarity 1 [ 11.638216] Already setup the GSI :17 [ 11.644623] ehci-pci 0000:00:16.2: enabling bus mastering [ 11.651025] ehci-pci 0000:00:16.2: EHCI Host Controller [ 11.657648] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 11.663967] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 11.670207] ehci-pci 0000:00:16.2: debug port 1 [ 11.676522] ehci-pci 0000:00:16.2: enabling Mem-Wr-Inval [ 11.682729] ehci-pci 0000:00:16.2: irq 17, io mem 0xf95ffc00 [ 11.696858] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 11.703028] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.706783] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 11.715183] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.721362] usb usb3: Product: EHCI Host Controller [ 11.727382] usb usb3: Manufacturer: Linux 3.11.0-rc2-20130722-jens ehci_hcd [ 11.727404] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 11.727406] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 11.740274] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 11.751663] usb usb3: SerialNumber: 0000:00:16.2 [ 11.757711] ata3.00: ATA-8: ST2000DL003-9VT166, CC45, max UDMA/133 [ 11.758188] hub 3-0:1.0: USB hub found [ 11.758195] hub 3-0:1.0: 4 ports detected [ 11.758670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.758671] ohci-pci: OHCI PCI platform driver [ 11.759142] xen: registering gsi 18 triggering 0 polarity 1 [ 11.759144] Already setup the GSI :18 [ 11.759164] ohci-pci 0000:00:12.0: enabling bus mastering [ 11.759180] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 11.759611] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 11.759700] ohci-pci 0000:00:12.0: irq 18, io mem 0xf95fb000 [ 11.814237] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.814239] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.814240] usb usb4: Product: OHCI PCI host controller [ 11.814241] usb usb4: Manufacturer: Linux 3.11.0-rc2-20130722-jens ohci_hcd [ 11.814242] usb usb4: SerialNumber: 0000:00:12.0 [ 11.815270] hub 4-0:1.0: USB hub found [ 11.815281] hub 4-0:1.0: 5 ports detected [ 11.815702] xen: registering gsi 18 triggering 0 polarity 1 [ 11.815704] Already setup the GSI :18 [ 11.815726] ohci-pci 0000:00:13.0: enabling bus mastering [ 11.815732] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 11.816100] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 11.816154] ohci-pci 0000:00:13.0: irq 18, io mem 0xf95fc000 [ 11.874546] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.874548] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.874549] usb usb5: Product: OHCI PCI host controller [ 11.874550] usb usb5: Manufacturer: Linux 3.11.0-rc2-20130722-jens ohci_hcd [ 11.874551] usb usb5: SerialNumber: 0000:00:13.0 [ 11.875145] hub 5-0:1.0: USB hub found [ 11.875155] hub 5-0:1.0: 5 ports detected [ 11.875560] xen: registering gsi 18 triggering 0 polarity 1 [ 11.875562] Already setup the GSI :18 [ 11.875580] ohci-pci 0000:00:14.5: enabling bus mastering [ 11.875586] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 11.875993] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 11.876047] ohci-pci 0000:00:14.5: irq 18, io mem 0xf95fd000 [ 11.932790] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.932792] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.932793] usb usb6: Product: OHCI PCI host controller [ 11.932794] usb usb6: Manufacturer: Linux 3.11.0-rc2-20130722-jens ohci_hcd [ 11.932794] usb usb6: SerialNumber: 0000:00:14.5 [ 11.933401] hub 6-0:1.0: USB hub found [ 11.933411] hub 6-0:1.0: 2 ports detected [ 11.933784] xen: registering gsi 18 triggering 0 polarity 1 [ 11.933786] Already setup the GSI :18 [ 11.933804] ohci-pci 0000:00:16.0: enabling bus mastering [ 11.933810] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 11.934167] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 11.934233] ohci-pci 0000:00:16.0: irq 18, io mem 0xf95fe000 [ 11.991030] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.991032] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.991033] usb usb7: Product: OHCI PCI host controller [ 11.991034] usb usb7: Manufacturer: Linux 3.11.0-rc2-20130722-jens ohci_hcd [ 11.991035] usb usb7: SerialNumber: 0000:00:16.0 [ 11.991686] hub 7-0:1.0: USB hub found [ 11.991695] hub 7-0:1.0: 4 ports detected [ 11.992164] uhci_hcd: USB Universal Host Controller Interface driver [ 11.992601] xen: registering gsi 48 triggering 0 polarity 1 [ 11.992604] Already setup the GSI :48 [ 11.992622] xhci_hcd 0000:09:00.0: enabling bus mastering [ 11.992627] xhci_hcd 0000:09:00.0: xHCI Host Controller [ 11.993064] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 8 [ 11.993286] xhci_hcd 0000:09:00.0: enabling Mem-Wr-Inval [ 11.994057] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.994058] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.994059] usb usb8: Product: xHCI Host Controller [ 11.994061] usb usb8: Manufacturer: Linux 3.11.0-rc2-20130722-jens xhci_hcd [ 11.994061] usb usb8: SerialNumber: 0000:09:00.0 [ 11.994527] xHCI xhci_add_endpoint called for root hub [ 11.994528] xHCI xhci_check_bandwidth called for root hub [ 11.994672] hub 8-0:1.0: USB hub found [ 11.994715] hub 8-0:1.0: 2 ports detected [ 11.994846] xhci_hcd 0000:09:00.0: xHCI Host Controller [ 11.995340] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 9 [ 11.996597] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 11.996598] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.996599] usb usb9: Product: xHCI Host Controller [ 11.996600] usb usb9: Manufacturer: Linux 3.11.0-rc2-20130722-jens xhci_hcd [ 11.996601] usb usb9: SerialNumber: 0000:09:00.0 [ 11.997102] xHCI xhci_add_endpoint called for root hub [ 11.997103] xHCI xhci_check_bandwidth called for root hub [ 11.997284] hub 9-0:1.0: USB hub found [ 11.997300] hub 9-0:1.0: 2 ports detected [ 12.232706] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 12.238446] ata1.00: configured for UDMA/133 [ 12.244839] ata3.00: configured for UDMA/133 [ 12.244876] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 12.245152] usbcore: registered new interface driver usblp [ 12.245333] usbcore: registered new interface driver usb-storage [ 12.245597] usbcore: registered new interface driver usbserial [ 12.245725] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 12.245797] sd 0:0:0:0: [sda] Write Protect is off [ 12.245799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.245815] usbcore: registered new interface driver cp210x [ 12.245829] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.246074] usbserial: USB Serial support registered for cp210x [ 12.246208] usbcore: registered new interface driver cypress_m8 [ 12.246357] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 12.246494] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 12.246622] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 12.246663] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.246762] usbcore: registered new interface driver mos7720 [ 12.246873] usbserial: USB Serial support registered for Moschip 2 port adapter [ 12.246994] usbcore: registered new interface driver mos7840 [ 12.247129] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 12.247610] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 12.248388] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.248428] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 12.249014] mousedev: PS/2 mouse device common for all mice [ 12.250073] rtc_cmos 00:03: RTC can wake from S4 [ 12.250755] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 12.250823] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram [ 12.251801] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130517/utaddress-251) [ 12.251803] ACPI: This conflict may cause random problems and system instability [ 12.251804] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.251810] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 12.252752] sda: sda1 sda2 sda3 [ 12.253094] lirc_dev: IR Remote Control driver registered, major 248 [ 12.253125] IR NEC protocol handler initialized [ 12.253126] IR RC5(x) protocol handler initialized [ 12.253127] IR RC6 protocol handler initialized [ 12.253128] IR JVC protocol handler initialized [ 12.253128] IR Sony protocol handler initialized [ 12.253129] IR RC5 (streamzap) protocol handler initialized [ 12.253130] IR SANYO protocol handler initialized [ 12.253131] IR MCE Keyboard/mouse protocol handler initialized [ 12.253132] IR LIRC bridge handler initialized [ 12.253132] cx25821: driver version 0.0.106 loaded [ 12.253695] usbcore: registered new interface driver pvrusb2 [ 12.253696] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 12.253697] pvrusb2: Debug mask is 31 (0x1f) [ 12.253868] f71805f: Unsupported Fintek device, skipping [ 12.253992] f71882fg: Found f71889ed chip at 0x600, revision 16 [ 12.254379] ACPI Warning: 0x0000000000000600-0x0000000000000607 SystemIO conflicts with Region \HMOR 1 (20130517/utaddress-251) [ 12.254381] ACPI: This conflict may cause random problems and system instability [ 12.254381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.254592] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode [ 12.254617] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode [ 12.254642] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode [ 12.254773] sd 0:0:0:0: [sda] Attached SCSI disk [ 12.330784] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 12.331015] sp5100_tco: PCI Revision ID: 0x41 [ 12.331071] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 12.331111] sp5100_tco: Last reboot was not triggered by watchdog. [ 12.331622] sp5100_tco: initialized (0xffffc9001056cb00). heartbeat=60 sec (nowayout=0) [ 12.331627] xen_wdt: Xen WatchDog Timer Driver v0.01 [ 12.331852] xen_wdt: cannot register miscdev on minor=130 (-16) [ 12.331857] wdt: probe of wdt failed with error -16 [ 12.332893] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@xxxxxxxxxx [ 12.333290] device-mapper: cache-policy-mq: version 1.0.0 loaded [ 12.333291] device-mapper: cache cleaner: version 1.0.0 loaded [ 12.333292] Bluetooth: Virtual HCI driver ver 1.3 [ 12.333459] Bluetooth: HCI UART driver ver 2.2 [ 12.333460] Bluetooth: HCI H4 protocol initialized [ 12.333461] Bluetooth: HCI BCSP protocol initialized [ 12.333461] Bluetooth: HCILL protocol initialized [ 12.333462] Bluetooth: HCIATH3K protocol initialized [ 12.333462] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 12.333591] usbcore: registered new interface driver bcm203x [ 12.333707] usbcore: registered new interface driver bpa10x [ 12.333825] usbcore: registered new interface driver bfusb [ 12.333945] usbcore: registered new interface driver btusb [ 12.334060] usbcore: registered new interface driver ath3k [ 12.334845] hidraw: raw HID events driver (C) Jiri Kosina [ 12.336210] usbcore: registered new interface driver usbhid [ 12.336211] usbhid: USB HID core driver [ 12.339274] usbcore: registered new interface driver snd-usb-audio [ 12.339409] usbcore: registered new interface driver snd-ua101 [ 12.339531] usbcore: registered new interface driver snd-usb-usx2y [ 12.339645] usbcore: registered new interface driver snd-usb-caiaq [ 12.339770] usbcore: registered new interface driver snd-usb-6fire [ 12.339817] Netfilter messages via NETLINK v0.30. [ 12.339825] nfnl_acct: registering with nfnetlink. [ 12.339912] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.340632] ctnetlink v0.93: registering with nfnetlink. [ 12.341425] xt_time: kernel timezone is -0000 [ 12.341449] ip_set: protocol 6 [ 12.341474] IPVS: Registered protocols () [ 12.341491] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 12.341567] IPVS: Creating netns size=1904 id=0 [ 12.820137] usb 4-5: new full-speed USB device number 2 using ohci-pci [ 12.825889] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC45 PQ: 0 ANSI: 5 [ 12.831662] IPVS: ipvs loaded. [ 12.832105] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 12.832106] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 12.832179] sd 2:0:0:0: [sdb] Write Protect is off [ 12.832181] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 12.832209] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.832579] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 12.850814] sdb: sdb1 [ 12.851790] sd 2:0:0:0: [sdb] Attached SCSI disk [ 12.882444] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.887969] TCP: cubic registered [ 12.893209] NET: Registered protocol family 17 [ 12.899014] Bridge firewalling registered [ 12.904085] Ebtables v2.0 registered [ 12.909409] Bluetooth: RFCOMM TTY layer initialized [ 12.914620] Bluetooth: RFCOMM socket layer initialized [ 12.919760] Bluetooth: RFCOMM ver 1.11 [ 12.924833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.929981] Bluetooth: BNEP filters: protocol multicast [ 12.935033] Bluetooth: BNEP socket layer initialized [ 12.940073] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 12.945073] Bluetooth: HIDP socket layer initialized [ 12.949979] Key type ceph registered [ 12.955088] libceph: loaded (mon/osd proto 15/24) [ 12.962058] registered taskstats version 1 [ 12.968066] console [netcon0] enabled [ 12.972756] netconsole: network logging started [ 12.977587] rtc_cmos 00:03: setting system clock to 2013-07-22 13:18:17 UTC (1374499097) [ 12.982539] ALSA device list: [ 12.987362] No soundcards found. [ 12.993445] Freeing unused kernel memory: 1068K (ffffffff822f6000 - ffffffff82401000) [ 12.998496] Write protecting the kernel read-only data: 18432k [ 13.012332] Freeing unused kernel memory: 1804K (ffff880001a3d000 - ffff880001c00000) [ 13.019064] Freeing unused kernel memory: 1952K (ffff880002018000 - ffff880002200000) [ 13.066802] udevd[1548]: starting version 175 [ 13.250159] usb 4-5: New USB device found, idVendor=0a12, idProduct=0001 [ 13.255702] usb 4-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 13.261247] usb 4-5: Product: EDRClassone [ 13.700775] bio: create slab at 2 [ 14.332086] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 17.210269] udevd[1959]: starting version 175 [ 130.161724] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 130.172305] (detected by 3, t=33837 jiffies, g=107, c=106, q=126) [ 130.180226] INFO: Stall ended before state dump start [ 131.052732] ata1.00: configured for UDMA/133 [ 131.061174] ata1: EH complete [ 132.143528] ata1.00: configured for UDMA/133 [ 132.149962] ata1: EH complete [ 133.214683] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 133.747387] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro [ 141.751979] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097148k [ 154.078205] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 308.571758] INFO: rcu_preempt self-detected stall on CPU [ 308.572077] INFO: rcu_preempt self-detected stall on CPU [ 308.572105] 1: (1 ticks this GP) idle=b03/1/0 softirq=2415/2415 last_accelerate: 4e40/0059, nonlazy_posted: 0, .. [ 308.575441] INFO: rcu_preempt self-detected stall on CPU [ 308.575446] [ 308.575451] (t=45593 jiffies g=1527 c=1526 q=67) [ 308.575461] 2: (1 GPs behind) idle=d1b/1/0 softirq=2276/2277 last_accelerate: 4e3e/0059, nonlazy_posted: 0, L. [ 308.575473] sending NMI to all CPUs: [ 308.575477] INFO: rcu_preempt self-detected stall on CPU [ 308.575483] xen: vector 0x2 is not implemented [ 308.575490] (t=45594 jiffies g=1527 c=1526 q=67) [ 308.575494] [ 308.575507] 3: (1 ticks this GP) idle=9fb/1/0 softirq=1945/1945 last_accelerate: 4e3d/005a, nonlazy_posted: 0, .. [ 308.575515] (t=45594 jiffies g=1527 c=1526 q=67) [ 308.672071] 5: (1 ticks this GP) idle=c8b/1/0 softirq=1858/1858 last_accelerate: 0014/0074, nonlazy_posted: 0, L. [ 308.679459] (t=45625 jiffies g=1527 c=1526 q=38) [ 308.795873] r8169 0000:0a:00.0 eth1: link down [ 308.803468] r8169 0000:0a:00.0 eth1: link down [ 310.542284] r8169 0000:0a:00.0 eth1: link up [ 318.576834] Hangcheck: hangcheck value past margin! [ 318.864711] r8169 0000:0b:00.0 eth0: link down [ 318.864739] r8169 0000:0b:00.0 eth0: link down [ 320.568031] r8169 0000:0b:00.0 eth0: link up [ 354.327283] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 362.438720] EXT4-fs (dm-38): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 368.357649] EXT4-fs (dm-39): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 374.127147] EXT4-fs (dm-40): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 380.253990] EXT4-fs (dm-41): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 386.177646] EXT4-fs (dm-42): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 392.091183] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 409.625658] device vif1.0 entered promiscuous mode [ 410.991212] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 411.006031] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 411.021055] xen_bridge: port 1(vif1.0) entered forwarding state [ 411.031874] xen_bridge: port 1(vif1.0) entered forwarding state [ 415.645195] device vif2.0 entered promiscuous mode [ 416.270291] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 416.285140] xen_bridge: port 2(vif2.0) entered forwarding state [ 416.296077] xen_bridge: port 2(vif2.0) entered forwarding state [ 421.460035] device vif3.0 entered promiscuous mode [ 422.291406] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 422.306596] xen_bridge: port 3(vif3.0) entered forwarding state [ 422.317470] xen_bridge: port 3(vif3.0) entered forwarding state [ 426.045067] xen_bridge: port 1(vif1.0) entered forwarding state [ 427.777376] device vif4.0 entered promiscuous mode [ 428.353842] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 428.368449] xen_bridge: port 4(vif4.0) entered forwarding state [ 428.378907] xen_bridge: port 4(vif4.0) entered forwarding state [ 431.340180] xen_bridge: port 2(vif2.0) entered forwarding state [ 434.013017] device vif5.0 entered promiscuous mode [ 434.631559] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 434.645852] xen_bridge: port 5(vif5.0) entered forwarding state [ 434.655769] xen_bridge: port 5(vif5.0) entered forwarding state [ 437.357494] xen_bridge: port 3(vif3.0) entered forwarding state [ 440.411524] device vif6.0 entered promiscuous mode [ 440.982165] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 440.995711] xen_bridge: port 6(vif6.0) entered forwarding state [ 441.005067] xen_bridge: port 6(vif6.0) entered forwarding state [ 443.442120] xen_bridge: port 4(vif4.0) entered forwarding state [ 446.208580] device vif7.0 entered promiscuous mode [ 447.111872] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 447.125025] xen_bridge: port 7(vif7.0) entered forwarding state [ 447.133803] xen_bridge: port 7(vif7.0) entered forwarding state [ 449.683875] xen_bridge: port 5(vif5.0) entered forwarding state [ 452.150805] device vif8.0 entered promiscuous mode [ 452.706925] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 452.719391] xen_bridge: port 8(vif8.0) entered forwarding state [ 452.727574] xen_bridge: port 8(vif8.0) entered forwarding state [ 456.036781] xen_bridge: port 6(vif6.0) entered forwarding state [ 458.014072] device vif9.0 entered promiscuous mode [ 458.805881] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 458.817776] xen_bridge: port 9(vif9.0) entered forwarding state [ 458.825354] xen_bridge: port 9(vif9.0) entered forwarding state [ 462.187889] xen_bridge: port 7(vif7.0) entered forwarding state [ 463.865197] device vif10.0 entered promiscuous mode [ 464.386533] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 464.397622] xen_bridge: port 10(vif10.0) entered forwarding state [ 464.404690] xen_bridge: port 10(vif10.0) entered forwarding state [ 467.783474] xen_bridge: port 8(vif8.0) entered forwarding state [ 470.094606] device vif11.0 entered promiscuous mode [ 470.241499] xen_pciback: vpci: 0000:03:06.0: assign to virtual slot 0 [ 470.831346] xen-blkback:ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) persistent grants [ 470.841951] xen_bridge: port 11(vif11.0) entered forwarding state [ 470.848515] xen_bridge: port 11(vif11.0) entered forwarding state [ 471.913689] pciback 0000:03:06.0: enabling device (0000 -> 0001) [ 471.920351] xen: registering gsi 22 triggering 0 polarity 1 [ 471.926977] Already setup the GSI :22 [ 471.934102] pciback 0000:03:06.0: enabling bus mastering [ 473.859205] xen_bridge: port 9(vif9.0) entered forwarding state [ 476.207025] device vif12.0 entered promiscuous mode [ 476.778793] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 476.789974] xen_bridge: port 12(vif12.0) entered forwarding state [ 476.796571] xen_bridge: port 12(vif12.0) entered forwarding state [ 479.461859] xen_bridge: port 10(vif10.0) entered forwarding state [ 482.786685] device vif13.0 entered promiscuous mode [ 485.861754] xen_bridge: port 11(vif11.0) entered forwarding state [ 487.386543] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 487.397926] vpn_bridge: port 1(vif13.0) entered forwarding state [ 487.404491] vpn_bridge: port 1(vif13.0) entered forwarding state [ 491.838121] xen_bridge: port 12(vif12.0) entered forwarding state [ 494.855984] device vif14.0 entered promiscuous mode [ 495.018975] device vif14.0-emu entered promiscuous mode [ 495.028374] xen_bridge: port 14(vif14.0-emu) entered forwarding state [ 495.034691] xen_bridge: port 14(vif14.0-emu) entered forwarding state [ 495.195540] xen_pciback: vpci: 0000:06:01.0: assign to virtual slot 0 [ 495.202163] xen_pciback: vpci: 0000:06:01.1: assign to virtual slot 0 func 1 [ 495.208601] xen_pciback: vpci: 0000:06:01.2: assign to virtual slot 0 func 2 [ 501.916866] device vif15.0 entered promiscuous mode [ 502.067250] device vif15.0-emu entered promiscuous mode [ 502.076082] xen_bridge: port 16(vif15.0-emu) entered forwarding state [ 502.081734] xen_bridge: port 16(vif15.0-emu) entered forwarding state [ 502.456762] vpn_bridge: port 1(vif13.0) entered forwarding state [ 508.199500] device vif16.0 entered promiscuous mode [ 508.354420] device vif16.0-emu entered promiscuous mode [ 508.363123] xen_bridge: port 18(vif16.0-emu) entered forwarding state [ 508.368096] xen_bridge: port 18(vif16.0-emu) entered forwarding state [ 510.087283] xen_bridge: port 14(vif14.0-emu) entered forwarding state [ 517.130795] xen_bridge: port 16(vif15.0-emu) entered forwarding state [ 518.727704] xen-blkback:ring-ref 8, event-channel 11, protocol 2 (x86_32-abi) persistent grants [ 519.676130] xen_bridge: port 15(vif15.0) entered forwarding state [ 519.680777] xen_bridge: port 15(vif15.0) entered forwarding state [ 520.200633] xen-blkback:ring-ref 8, event-channel 22, protocol 1 (x86_64-abi) persistent grants [ 520.220857] xen_bridge: port 13(vif14.0) entered forwarding state [ 520.225623] xen_bridge: port 13(vif14.0) entered forwarding state [ 523.427288] xen_bridge: port 18(vif16.0-emu) entered forwarding state [ 532.008384] xen-blkback:ring-ref 8, event-channel 11, protocol 2 (x86_32-abi) persistent grants [ 533.194358] xen_bridge: port 17(vif16.0) entered forwarding state [ 533.200656] xen_bridge: port 17(vif16.0) entered forwarding state [ 534.739763] xen_bridge: port 15(vif15.0) entered forwarding state [ 535.273256] xen_bridge: port 13(vif14.0) entered forwarding state [ 548.239993] xen_bridge: port 17(vif16.0) entered forwarding state [ 1471.095864] FW: BLOCKED or INVALID ICMP: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=79.229.106.162 DST=88.159.66.121 LEN=157 TOS=0x00 PREC=0x00 TTL=237 ID=37261 PROTO=ICMP TYPE=3 CODE=1 [SRC=88.159.66.121 DST=192.168.1.247 LEN=129 TOS=0x00 PREC=0x00 TTL=49 ID=0 DF PROTO=UDP SPT=49160 DPT=30395 LEN=109 ]