LAGER SPI_LOADER V0.28 2014.09.29 DEVICE S25FL512 U-Boot 2014.10-00441-gf7ca1f7-dirty (Oct 19 2015 - 12:32:17) CPU: Renesas Electronics R8A7790 rev 2.0 Board: Lager I2C: ready DRAM: 2 GiB SF: Detected S25FL512S_256K with page size 512 Bytes, erase size 256 KiB, total 64 MiB In: serial Out: serial Err: serial Net: sh_eth Hit any key to stop autoboot: 0 sh_eth Waiting for PHY auto negotiation to complete... done sh_eth: 100Base/Half Using sh_eth device TFTP from server 192.168.0.15; our IP address is 192.168.0.5 Filename 'r8a7790-lager-xen.dtb'. Load address: 0x70f00000 Loading: ######### 395.5 KiB/s done Bytes transferred = 44621 (ae4d hex) sh_eth:1 is connected to sh_eth. Reconnecting to sh_eth sh_eth Waiting for PHY auto negotiation to complete... done sh_eth: 100Base/Half Using sh_eth device TFTP from server 192.168.0.15; our IP address is 192.168.0.5 Filename 'dom0-zImage'. Load address: 0x72000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 603.5 KiB/s done Bytes transferred = 1553064 (17b2a8 hex) sh_eth:1 is connected to sh_eth. Reconnecting to sh_eth sh_eth Waiting for PHY auto negotiation to complete... done sh_eth: 100Base/Half Using sh_eth device TFTP from server 192.168.0.15; our IP address is 192.168.0.5 Filename 'xenpolicy'. Load address: 0x74000000 Loading: ## 41 KiB/s done Bytes transferred = 9561 (2559 hex) chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "/serial@e6e60000"; xen,xen-bootargs = "console=dtuart dom0_mem=1G"; xen,dom0-bootargs = "console=hvc0 earlyprintk=xen debug ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 ip=192.168.0.5:192.168.0.15:192.168.0.15:255.255.255.0:lager:eth0::: root=/dev/nfs rw nfsroot=192.168.0.15:/nfsroot rootdelay clk_ignore_unused"; modules { #address-cells = <0x00000001>; #size-cells = <0x00000001>; module@0x72000000 { reg = <0x72000000 0x0017b2a8>; compatible = "multiboot,kernel", "multiboot,module"; }; module@0x74000000 { reg = <0x74000000 0x00002559>; compatible = "xen,xsm-policy", "multiboot,module"; }; }; }; sh_eth:1 is connected to sh_eth. Reconnecting to sh_eth sh_eth Waiting for PHY auto negotiation to complete... done sh_eth: 100Base/Half Using sh_eth device TFTP from server 192.168.0.15; our IP address is 192.168.0.5 Filename 'xen-uImage'. Load address: 0x70007fc0 Loading: ################################################################# ################################################################# ##################################### 615.2 KiB/s done Bytes transferred = 852948 (d03d4 hex) ## Booting kernel from Legacy Image at 70007fc0 ... Image Name: XEN4.6-LAGER Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 852884 Bytes = 832.9 KiB Load Address: 90000000 Entry Point: 90000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 70f00000 Booting using the fdt blob at 0x70f00000 Loading Kernel Image ... OK reserving fdt memory region: addr=70f00000 size=b000 Loading Device Tree to 407f2000, end 407fffff ... OK Starting kernel ... - UART enabled - - CPU 00000000 booting - - Xen starting in Hyp mode - - Zero BSS - - Setting up control registers - - Turning on paging - - Ready - (XEN) Checking for initrd in /chosen (XEN) RAM: 0000000040000000 - 000000007fffffff (XEN) RAM: 0000000140000000 - 00000001ffffffff (XEN) (XEN) MODULE[0]: 00000000407f2000 - 00000000407fd000 Device Tree (XEN) MODULE[1]: 0000000072000000 - 000000007217b2a8 Kernel (XEN) MODULE[2]: 0000000074000000 - 0000000074002559 XSM (XEN) RESVD[0]: 0000000070f00000 - 0000000070f0b000 (XEN) RESVD[1]: 000000007ff9a000 - 000000007ff9a120 (XEN) RESVD[2]: 00000000407f2000 - 00000000407fd000 (XEN) (XEN) Command line: console=dtuart dom0_mem=1G (XEN) Placing Xen at 0x000000007fc00000-0x000000007fe00000 (XEN) Update BOOTMOD_XEN from 0000000090000000-000000009011b701 => 000000007fc00000-000000007fd1b701 (XEN) Xen heap: 00000001f8000000-0000000200000000 (32768 pages) (XEN) Dom heap: 1015808 pages (XEN) Domain heap initialised (XEN) Platform: Renesas R-Car Gen2 (XEN) Taking dtuart configuration from /chosen/stdout-path (XEN) Looking for dtuart at "/serial@e6e60000", options "" __ __ _ _ __ ___ \ \/ /___ _ __ | || | / /_ / _ \ \ // _ \ '_ \ | || |_| '_ \| | | | / \ __/ | | | |__ _| (_) | |_| | /_/\_\___|_| |_| |_|(_)___(_)___/ (XEN) Xen version 4.6.0 (aen@) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 4.8.2-16ubuntu4) 4.8.2) debug=y Thu Oct 22 13:31:12 CEST 2015 (XEN) Latest ChangeSet: Mon Oct 5 15:33:39 2015 +0100 git:b24ad7b (XEN) Processor: 413fc0f2: "ARM Limited", variant: 0x3, part 0xc0f, rev 0x2 (XEN) 32-bit Execution: (XEN) Processor Features: 00001131:00011011 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle (XEN) Extensions: GenericTimer Security (XEN) Debug Features: 02010555 (XEN) Auxiliary Features: 00000000 (XEN) Memory Model Features: 10201105 40000000 01240000 02102211 (XEN) ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 10000 KHz (XEN) GICv2 initialization: (XEN) gic_dist_addr=00000000f1001000 (XEN) gic_cpu_addr=00000000f1002000 (XEN) gic_hyp_addr=00000000f1004000 (XEN) gic_vcpu_addr=00000000f1006000 (XEN) gic_maintenance_irq=25 (XEN) GICv2: 416 lines, 8 cpus, secure (IID 0200043b). (XEN) XSM Framework v1.0.0 initialized (XEN) xsm: Policy len = 0x0000000000002559 start at 0x0000000074000000 (XEN) Flask: 64 avtab hash slots, 236 rules. (XEN) Flask: 64 avtab hash slots, 236 rules. (XEN) Flask: 3 users, 3 roles, 36 types, 2 bools (XEN) Flask: 12 classes, 236 rules (XEN) Flask: Starting in permissive mode. (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Allocated console ring of 64 KiB. (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 (XEN) Bringing up CPU1 (XEN) CPU1 never came online (XEN) Failed to bring up CPU 1 (error -5) (XEN) Bringing up CPU2 (XEN) CPU2 never came online (XEN) Failed to bring up CPU 2 (error -5) (XEN) Bringing up CPU3 (XEN) CPU3 never came online (XEN) Failed to bring up CPU 3 (error -5) (XEN) Bringing up CPU4 (XEN) CPU4 never came online (XEN) Failed to bring up CPU 4 (error -5) (XEN) Bringing up CPU5 (XEN) CPU5 never came online (XEN) Failed to bring up CPU 5 (error -5) (XEN) Bringing up CPU6 (XEN) CPU6 never came online (XEN) Failed to bring up CPU 6 (error -5) (XEN) Bringing up CPU7 (XEN) CPU7 never came online (XEN) Failed to bring up CPU 7 (error -5) (XEN) Brought up 1 CPUs (XEN) P2M: 40-bit IPA (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 (XEN) I/O virtualisation disabled (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading kernel from boot module @ 0000000072000000 (XEN) Allocating 1:1 mappings totalling 1024MB for dom0: (XEN) BANK[0] 0x00000048000000-0x00000070000000 (640MB) (XEN) BANK[1] 0x000001d8000000-0x000001f0000000 (384MB) (XEN) Grant table range: 0x0000007fc00000-0x0000007fc72000 (XEN) Loading zImage from 0000000072000000 to 000000004fe00000-000000004ff7b2a8 (XEN) Allocating PPI 16 for event channel interrupt (XEN) Loading dom0 DTB to 0x0000000050000000-0x000000005000a947 (XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs (XEN) ................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 268kB init memory. Booting Linux on physical CPU 0x0 Linux version 4.3.0-rc6kostal-xen4.6-00108-gce1fad2-dirty (aen@aen-virtual-machine) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #7 Thu Oct 22 16:23:21 CEST 2015 CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Lager Ignoring memory block 0x1d8000000 - 0x1f0000000 debug: ignoring loglevel setting. Truncating RAM at 0x48000000-0x70000000 to -0x6f000000 Consider using a HIGHMEM enabled kernel. Memory policy: Data cache writeback On node 0 totalpages: 159744 free_area_init_node: node 0, pgdat c02e7c08, node_mem_map e6b1b000 Normal zone: 1248 pages used for memmap Normal zone: 0 pages reserved Normal zone: 159744 pages, LIFO batch:31 psci: probing for conduit method from DT. psci: PSCIv0.2 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: Trusted OS migration not required Xen 4.6 support found CPU: All CPU(s) started in SVC mode. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 158496 Kernel command line: console=hvc0 earlyprintk=xen debug ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 ip=192.168.0.5:192.168.0.15:192.168.0.15:255.255.255.0:lager:eth0::: root=/dev/nfs rw nfsroot=192.168.0.15:/nfsroot rootdelay clk_ignore_unused PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 629812K/638976K available (2309K kernel code, 72K rwdata, 444K rodata, 116K init, 192K bss, 9164K reserved, 0K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe7800000 - 0xff000000 ( 376 MB) lowmem : 0xc0000000 - 0xe7000000 ( 624 MB) .text : 0xc0008000 - 0xc02b8694 (2754 kB) .init : 0xc02b9000 - 0xc02d6000 ( 116 kB) .data : 0xc02d6000 - 0xc02e83e0 ( 73 kB) .bss : 0xc02e83e0 - 0xc0318764 ( 193 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:16 nr_irqs:16 16 clocksource_of_init: no matching clocksources found sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns Console: colour dummy device 80x30 console [hvc0] enabled Calibrating delay loop...