x86: suppress SMEP and SMAP while running 32-bit PV guest code Since such guests' kernel code runs in ring 1, their memory accesses, at the paging layer, are supervisor mode ones, and hence subject to SMAP/SMEP checks. Such guests cannot be expected to be aware of those two features though (and so far we also don't expose the respective feature flags), and hence may suffer page faults they cannot deal with. While the placement of the re-enabling slightly weakens the intended protection, it was selected such that 64-bit paths would remain unaffected where possible. At the expense of a further performance hit the re-enabling could be put right next to the CLACs. Note that this introduces a number of extra TLB flushes - CR4.SMEP transitioning from 0 to 1 always causes a flush, and it transitioning from 1 to 0 may also do. Signed-off-by: Jan Beulich --- v3: Move up CR4_PV32_RESTORE in handle_ist_exception. Don't clear SMEP/ SMAP upon exiting to guest user mode. Read current CR4 value from memory cache even in assembly code. v2: Use more generic symbol/label names. Comment the BUG in assembly code and restrict it to debug builds. Add C equivalent to #PF re-execution condition in a comment. Use .skip instead of .org in handle_exception to avoid gas bug (and its slightly ugly workaround). Use a properly named label instead of a numeric one in handle_exception. --- a/xen/arch/x86/setup.c +++ b/xen/arch/x86/setup.c @@ -67,6 +67,8 @@ boolean_param("smep", opt_smep); static bool_t __initdata opt_smap = 1; boolean_param("smap", opt_smap); +unsigned long __read_mostly cr4_pv32_mask; + /* Boot dom0 in pvh mode */ static bool_t __initdata opt_dom0pvh; boolean_param("dom0pvh", opt_dom0pvh); @@ -1364,6 +1366,8 @@ void __init noreturn __start_xen(unsigne if ( cpu_has_smap ) set_in_cr4(X86_CR4_SMAP); + cr4_pv32_mask = mmu_cr4_features & (X86_CR4_SMEP | X86_CR4_SMAP); + if ( cpu_has_fsgsbase ) set_in_cr4(X86_CR4_FSGSBASE); @@ -1500,7 +1504,10 @@ void __init noreturn __start_xen(unsigne * copy_from_user(). */ if ( cpu_has_smap ) + { + cr4_pv32_mask &= ~X86_CR4_SMAP; write_cr4(read_cr4() & ~X86_CR4_SMAP); + } printk("%sNX (Execute Disable) protection %sactive\n", cpu_has_nx ? XENLOG_INFO : XENLOG_WARNING "Warning: ", @@ -1517,7 +1524,10 @@ void __init noreturn __start_xen(unsigne panic("Could not set up DOM0 guest OS"); if ( cpu_has_smap ) + { write_cr4(read_cr4() | X86_CR4_SMAP); + cr4_pv32_mask |= X86_CR4_SMAP; + } /* Scrub RAM that is still free and so may go to an unprivileged domain. */ scrub_heap_pages(); --- a/xen/arch/x86/x86_64/asm-offsets.c +++ b/xen/arch/x86/x86_64/asm-offsets.c @@ -135,6 +135,7 @@ void __dummy__(void) OFFSET(CPUINFO_guest_cpu_user_regs, struct cpu_info, guest_cpu_user_regs); OFFSET(CPUINFO_processor_id, struct cpu_info, processor_id); OFFSET(CPUINFO_current_vcpu, struct cpu_info, current_vcpu); + OFFSET(CPUINFO_cr4, struct cpu_info, cr4); DEFINE(CPUINFO_sizeof, sizeof(struct cpu_info)); BLANK(); --- a/xen/arch/x86/x86_64/compat/entry.S +++ b/xen/arch/x86/x86_64/compat/entry.S @@ -16,14 +16,16 @@ ENTRY(compat_hypercall) ASM_CLAC pushq $0 SAVE_VOLATILE type=TRAP_syscall compat=1 + CR4_PV32_RESTORE cmpb $0,untrusted_msi(%rip) UNLIKELY_START(ne, msi_check) movl $HYPERCALL_VECTOR,%edi call check_for_unexpected_msi - LOAD_C_CLOBBERED + LOAD_C_CLOBBERED compat=1 ax=0 UNLIKELY_END(msi_check) + movl UREGS_rax(%rsp),%eax GET_CURRENT(%rbx) cmpl $NR_hypercalls,%eax @@ -33,7 +35,6 @@ UNLIKELY_END(msi_check) pushq UREGS_rbx(%rsp); pushq %rcx; pushq %rdx; pushq %rsi; pushq %rdi pushq UREGS_rbp+5*8(%rsp) leaq compat_hypercall_args_table(%rip),%r10 - movl %eax,%eax movl $6,%ecx subb (%r10,%rax,1),%cl movq %rsp,%rdi @@ -48,7 +49,6 @@ UNLIKELY_END(msi_check) #define SHADOW_BYTES 16 /* Shadow EIP + shadow hypercall # */ #else /* Relocate argument registers and zero-extend to 64 bits. */ - movl %eax,%eax /* Hypercall # */ xchgl %ecx,%esi /* Arg 2, Arg 4 */ movl %edx,%edx /* Arg 3 */ movl %edi,%r8d /* Arg 5 */ @@ -174,10 +174,61 @@ compat_bad_hypercall: /* %rbx: struct vcpu, interrupts disabled */ ENTRY(compat_restore_all_guest) ASSERT_INTERRUPTS_DISABLED +.Lcr4_orig: + ASM_NOP8 /* testb $3,UREGS_cs(%rsp) */ + ASM_NOP2 /* jpe .Lcr4_alt_end */ + ASM_NOP8 /* mov CPUINFO_cr4...(%rsp), %rax */ + ASM_NOP6 /* and $..., %rax */ + ASM_NOP8 /* mov %rax, CPUINFO_cr4...(%rsp) */ + ASM_NOP3 /* mov %rax, %cr4 */ +.Lcr4_orig_end: + .pushsection .altinstr_replacement, "ax" +.Lcr4_alt: + testb $3,UREGS_cs(%rsp) + jpe .Lcr4_alt_end + mov CPUINFO_cr4-CPUINFO_guest_cpu_user_regs(%rsp), %rax + and $~(X86_CR4_SMEP|X86_CR4_SMAP), %rax + mov %rax, CPUINFO_cr4-CPUINFO_guest_cpu_user_regs(%rsp) + mov %rax, %cr4 +.Lcr4_alt_end: + .section .altinstructions, "a" + altinstruction_entry .Lcr4_orig, .Lcr4_alt, X86_FEATURE_SMEP, \ + (.Lcr4_orig_end - .Lcr4_orig), \ + (.Lcr4_alt_end - .Lcr4_alt) + altinstruction_entry .Lcr4_orig, .Lcr4_alt, X86_FEATURE_SMAP, \ + (.Lcr4_orig_end - .Lcr4_orig), \ + (.Lcr4_alt_end - .Lcr4_alt) + .popsection RESTORE_ALL adj=8 compat=1 .Lft0: iretq _ASM_PRE_EXTABLE(.Lft0, handle_exception) +/* This mustn't modify registers other than %rax. */ +ENTRY(cr4_pv32_restore) + push %rdx + GET_CPUINFO_FIELD(cr4, %rdx) + mov (%rdx), %rax + test $X86_CR4_SMEP|X86_CR4_SMAP,%eax + jnz 0f + or cr4_pv32_mask(%rip), %rax + mov %rax, %cr4 + mov %rax, (%rdx) + pop %rdx + ret +0: +#ifndef NDEBUG + /* Check that _all_ of the bits intended to be set actually are. */ + mov %cr4, %rax + and cr4_pv32_mask(%rip), %eax + cmp cr4_pv32_mask(%rip), %eax + je 1f + BUG +1: +#endif + pop %rdx + xor %eax, %eax + ret + /* %rdx: trap_bounce, %rbx: struct vcpu */ ENTRY(compat_post_handle_exception) testb $TBF_EXCEPTION,TRAPBOUNCE_flags(%rdx) @@ -190,6 +241,7 @@ ENTRY(compat_post_handle_exception) /* See lstar_enter for entry register state. */ ENTRY(cstar_enter) sti + CR4_PV32_RESTORE movq 8(%rsp),%rax /* Restore %rax. */ movq $FLAT_KERNEL_SS,8(%rsp) pushq %r11 @@ -225,6 +277,7 @@ UNLIKELY_END(compat_syscall_gpf) jmp .Lcompat_bounce_exception ENTRY(compat_sysenter) + CR4_PV32_RESTORE movq VCPU_trap_ctxt(%rbx),%rcx cmpb $TRAP_gp_fault,UREGS_entry_vector(%rsp) movzwl VCPU_sysenter_sel(%rbx),%eax @@ -238,6 +291,7 @@ ENTRY(compat_sysenter) jmp compat_test_all_events ENTRY(compat_int80_direct_trap) + CR4_PV32_RESTORE call compat_create_bounce_frame jmp compat_test_all_events --- a/xen/arch/x86/x86_64/entry.S +++ b/xen/arch/x86/x86_64/entry.S @@ -434,6 +434,7 @@ ENTRY(dom_crash_sync_extable) ENTRY(common_interrupt) SAVE_ALL CLAC + CR4_PV32_RESTORE movq %rsp,%rdi callq do_IRQ jmp ret_from_intr @@ -454,13 +455,67 @@ ENTRY(page_fault) GLOBAL(handle_exception) SAVE_ALL CLAC handle_exception_saved: + GET_CURRENT(%rbx) testb $X86_EFLAGS_IF>>8,UREGS_eflags+1(%rsp) jz exception_with_ints_disabled + +.Lcr4_pv32_orig: + jmp .Lcr4_pv32_done + .skip (.Lcr4_pv32_alt_end - .Lcr4_pv32_alt) - (. - .Lcr4_pv32_orig), 0xcc + .pushsection .altinstr_replacement, "ax" +.Lcr4_pv32_alt: + mov VCPU_domain(%rbx),%rax +.Lcr4_pv32_alt_end: + .section .altinstructions, "a" + altinstruction_entry .Lcr4_pv32_orig, .Lcr4_pv32_alt, \ + X86_FEATURE_SMEP, \ + (.Lcr4_pv32_alt_end - .Lcr4_pv32_alt), \ + (.Lcr4_pv32_alt_end - .Lcr4_pv32_alt) + altinstruction_entry .Lcr4_pv32_orig, .Lcr4_pv32_alt, \ + X86_FEATURE_SMAP, \ + (.Lcr4_pv32_alt_end - .Lcr4_pv32_alt), \ + (.Lcr4_pv32_alt_end - .Lcr4_pv32_alt) + .popsection + + testb $3,UREGS_cs(%rsp) + jz .Lcr4_pv32_done + cmpb $0,DOMAIN_is_32bit_pv(%rax) + je .Lcr4_pv32_done + call cr4_pv32_restore + /* + * An NMI or #MC may occur between clearing CR4.SMEP / CR4.SMAP in + * compat_restore_all_guest and it actually returning to guest + * context, in which case the guest would run with the two features + * enabled. The only bad that can happen from this is a kernel mode + * #PF which the guest doesn't expect. Rather than trying to make the + * NMI/#MC exit path honor the intended CR4 setting, simply check + * whether the wrong CR4 was in use when the #PF occurred, and exit + * back to the guest (which will in turn clear the two CR4 bits) to + * re-execute the instruction. If we get back here, the CR4 bits + * should then be found clear (unless another NMI/#MC occurred at + * exactly the right time), and we'll continue processing the + * exception as normal. + */ + test %rax,%rax + jnz .Lcr4_pv32_done + /* + * The below effectively is + * if ( regs->entry_vector == TRAP_page_fault && + * (regs->error_code & PFEC_page_present) && + * !(regs->error_code & ~(PFEC_write_access|PFEC_insn_fetch)) ) + * goto compat_test_all_events; + */ + mov $PFEC_page_present,%al + cmpb $TRAP_page_fault,UREGS_entry_vector(%rsp) + jne .Lcr4_pv32_done + xor UREGS_error_code(%rsp),%eax + test $~(PFEC_write_access|PFEC_insn_fetch),%eax + jz compat_test_all_events +.Lcr4_pv32_done: sti 1: movq %rsp,%rdi movzbl UREGS_entry_vector(%rsp),%eax leaq exception_table(%rip),%rdx - GET_CURRENT(%rbx) PERFC_INCR(exceptions, %rax, %rbx) callq *(%rdx,%rax,8) testb $3,UREGS_cs(%rsp) @@ -590,6 +645,7 @@ ENTRY(nmi) movl $TRAP_nmi,4(%rsp) handle_ist_exception: SAVE_ALL CLAC + CR4_PV32_RESTORE testb $3,UREGS_cs(%rsp) jz 1f /* Interrupted guest context. Copy the context to stack bottom. */ --- a/xen/include/asm-x86/asm_defns.h +++ b/xen/include/asm-x86/asm_defns.h @@ -209,6 +209,16 @@ void ret_from_intr(void); #define ASM_STAC ASM_AC(STAC) #define ASM_CLAC ASM_AC(CLAC) + +#define CR4_PV32_RESTORE \ + 667: ASM_NOP5; \ + .pushsection .altinstr_replacement, "ax"; \ + 668: call cr4_pv32_restore; \ + .section .altinstructions, "a"; \ + altinstruction_entry 667b, 668b, X86_FEATURE_SMEP, 5, 5; \ + altinstruction_entry 667b, 668b, X86_FEATURE_SMAP, 5, 5; \ + .popsection + #else static always_inline void clac(void) { @@ -308,14 +318,18 @@ static always_inline void stac(void) * * For the way it is used in RESTORE_ALL, this macro must preserve EFLAGS.ZF. */ -.macro LOAD_C_CLOBBERED compat=0 +.macro LOAD_C_CLOBBERED compat=0 ax=1 .if !\compat movq UREGS_r11(%rsp),%r11 movq UREGS_r10(%rsp),%r10 movq UREGS_r9(%rsp),%r9 movq UREGS_r8(%rsp),%r8 -.endif +.if \ax movq UREGS_rax(%rsp),%rax +.endif +.elseif \ax + movl UREGS_rax(%rsp),%eax +.endif movq UREGS_rcx(%rsp),%rcx movq UREGS_rdx(%rsp),%rdx movq UREGS_rsi(%rsp),%rsi --- a/xen/include/asm-x86/processor.h +++ b/xen/include/asm-x86/processor.h @@ -134,12 +134,12 @@ #define TF_kernel_mode (1<<_TF_kernel_mode) /* #PF error code values. */ -#define PFEC_page_present (1U<<0) -#define PFEC_write_access (1U<<1) -#define PFEC_user_mode (1U<<2) -#define PFEC_reserved_bit (1U<<3) -#define PFEC_insn_fetch (1U<<4) -#define PFEC_prot_key (1U<<5) +#define PFEC_page_present (_AC(1,U) << 0) +#define PFEC_write_access (_AC(1,U) << 1) +#define PFEC_user_mode (_AC(1,U) << 2) +#define PFEC_reserved_bit (_AC(1,U) << 3) +#define PFEC_insn_fetch (_AC(1,U) << 4) +#define PFEC_prot_key (_AC(1,U) << 5) /* Internally used only flags. */ #define PFEC_page_paged (1U<<16) #define PFEC_page_shared (1U<<17)