mwait-idle: correct/improve BXT support

Linux commit 5dcef69486 ("intel_idle: add BXT support") added an
8-element lookup array with just a 2-bit value used for lookups. As per
the SDM that bit field is really 3 bits wide. Since the top two array
entries are zero, deal with the resulting invalid (zero) values by
moving the zero-MSR-value check into irtl_2_usec() and having that
function's caller check its result instead.

Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>

--- a/xen/arch/x86/cpu/mwait-idle.c
+++ b/xen/arch/x86/cpu/mwait-idle.c
@@ -922,7 +922,10 @@ static unsigned long long __init irtl_2_
 {
 	unsigned long long ns;
 
-	ns = irtl_ns_units[(irtl >> 10) & 0x3];
+	if (!irtl)
+		return 0;
+
+	ns = irtl_ns_units[(irtl >> 10) & 0x7];
 
 	return (irtl & 0x3FF) * ns / 1000;
 }
@@ -935,43 +938,39 @@ static unsigned long long __init irtl_2_
 static void __init bxt_idle_state_table_update(void)
 {
 	unsigned long long msr;
+	unsigned int usec;
 
 	rdmsrl(MSR_PKGC6_IRTL, msr);
-	if (msr) {
-		unsigned int usec = irtl_2_usec(msr);
-
+	usec = irtl_2_usec(msr);
+	if (usec) {
 		bxt_cstates[2].exit_latency = usec;
 		bxt_cstates[2].target_residency = usec;
 	}
 
 	rdmsrl(MSR_PKGC7_IRTL, msr);
-	if (msr) {
-		unsigned int usec = irtl_2_usec(msr);
-
+	usec = irtl_2_usec(msr);
+	if (usec) {
 		bxt_cstates[3].exit_latency = usec;
 		bxt_cstates[3].target_residency = usec;
 	}
 
 	rdmsrl(MSR_PKGC8_IRTL, msr);
-	if (msr) {
-		unsigned int usec = irtl_2_usec(msr);
-
+	usec = irtl_2_usec(msr);
+	if (usec) {
 		bxt_cstates[4].exit_latency = usec;
 		bxt_cstates[4].target_residency = usec;
 	}
 
 	rdmsrl(MSR_PKGC9_IRTL, msr);
-	if (msr) {
-		unsigned int usec = irtl_2_usec(msr);
-
+	usec = irtl_2_usec(msr);
+	if (usec) {
 		bxt_cstates[5].exit_latency = usec;
 		bxt_cstates[5].target_residency = usec;
 	}
 
 	rdmsrl(MSR_PKGC10_IRTL, msr);
-	if (msr) {
-		unsigned int usec = irtl_2_usec(msr);
-
+	usec = irtl_2_usec(msr);
+	if (usec) {
 		bxt_cstates[6].exit_latency = usec;
 		bxt_cstates[6].target_residency = usec;
 	}