(XEN) Xen version 4.6.0 (Debian 4.6.0-1+nmu2) (ijc@xxxxxxxxxx) (gcc (Debian 5.3.1-8) 5.3.1 20160205) debug=n Tue Feb  9 17:46:27 UTC 2016
(XEN) Bootloader: GRUB 2.02~beta2-36
(XEN) Command line: placeholder dom0_mem=2048M,max:2048M noreboot dom0_max_vcpus=1 com1=115200,8n1 console=com2 loglvl=all guest_loglvl=all no-real-mode edd=off
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN)  Found 0 MBR signatures
(XEN)  Found 0 EDD information structures
(XEN) Multiboot-e820 RAM map:
(XEN)  0000000000000000 - 00000000000a0000 (usable)
(XEN)  0000000000100000 - 0000000079238000 (usable)
(XEN)  0000000079238000 - 000000007984e000 (reserved)
(XEN)  000000007984e000 - 0000000079931000 (usable)
(XEN)  0000000079931000 - 0000000079e08000 (ACPI NVS)
(XEN)  0000000079e08000 - 000000007bcf3000 (reserved)
(XEN)  000000007bcf3000 - 000000007bd52000 type 20
(XEN)  000000007bd52000 - 000000007bd53000 (usable)
(XEN)  000000007bd53000 - 000000007bdd9000 (reserved)
(XEN)  000000007bdd9000 - 000000007c000000 (usable)
(XEN)  0000000080000000 - 0000000090000000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000880000000 (usable)
(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
(XEN) System RAM: 32660MB (33444748kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000880000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fd8a0
(XEN) DMI 2.7 present.
(XEN) Using APIC driver default
(XEN) ERST table was not found
(XEN) Intel MultiProcessor Specification v1.4
(XEN)     Virtual Wire compatibility mode.
(XEN) OEM ID: SMCI--MB Product ID: SUPERM APIC at: 0xfee00000
(XEN) Processor #0 6:15 APIC version 21
(XEN) Processor #2 6:15 APIC version 21
(XEN) Processor #4 6:15 APIC version 21
(XEN) Processor #6 6:15 APIC version 21
(XEN) I/O APIC #8 Version 32 at 0xfec00000.
(XEN) I/O APIC #9 Version 32 at 0xfec01000.
(XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
(XEN) Processors: 4
(XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs)
(XEN) IRQ limits: 48 GSI, 736 MSI/MSI-X
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7
(XEN) CMCI: threshold 0x2 too large for CPU0 bank 17, using 0x1
(XEN) CMCI: threshold 0x2 too large for CPU0 bank 18, using 0x1
(XEN) CMCI: threshold 0x2 too large for CPU0 bank 19, using 0x1
(XEN) Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3700.045 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802bd010 -> ffff82d0802be240
(XEN) I/O virtualisation disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) Platform timer is 1.193MHz PIT
(XEN) Allocated console ring of 32 KiB.
(XEN) mwait-idle: does not run on family 6 model 63
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN)  - Unrestricted Guest
(XEN)  - APIC Register Virtualization
(XEN)  - Virtual Interrupt Delivery
(XEN)  - Posted Interrupt Processing
(XEN)  - VMCS shadowing
(XEN)  - VM Functions
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 240 PIRQs
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1d7c000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000864000000->0000000866000000 (511534 pages to be allocated)
(XEN)  Init. ramdisk: 000000087ee2e000->000000087ffffc56
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff81000000->ffffffff81d7c000
(XEN)  Init. ramdisk: 0000000000000000->0000000000000000
(XEN)  Phys-Mach map: 0000008000000000->0000008000400000
(XEN)  Start info:    ffffffff81d7c000->ffffffff81d7c4b4
(XEN)  Page tables:   ffffffff81d7d000->ffffffff81d90000
(XEN)  Boot stack:    ffffffff81d90000->ffffffff81d91000
(XEN)  TOTAL:         ffffffff80000000->ffffffff82000000
(XEN)  ENTRY ADDRESS: ffffffff81b2c180
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) ....................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 288kB init memory.
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:03.2
(XEN) PCI add device 0000:00:03.3
(XEN) PCI add device 0000:00:04.0
(XEN) PCI add device 0000:00:04.1
(XEN) PCI add device 0000:00:04.2
(XEN) PCI add device 0000:00:04.3
(XEN) PCI add device 0000:00:04.4
(XEN) PCI add device 0000:00:04.5
(XEN) PCI add device 0000:00:04.6
(XEN) PCI add device 0000:00:04.7
(XEN) PCI add device 0000:00:05.0
(XEN) PCI add device 0000:00:05.1
(XEN) PCI add device 0000:00:05.2
(XEN) PCI add device 0000:00:05.4
(XEN) PCI add device 0000:00:11.0
(XEN) PCI add device 0000:00:11.4
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:16.0
(XEN) PCI add device 0000:00:16.1
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.6
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:00:1f.3
(XEN) PCI add device 0000:00:1f.6
(XEN) PCI add device 0000:05:00.0
(XEN) PCI add device 0000:05:00.1
(XEN) PCI add device 0000:08:00.0
(XEN) PCI add device 0000:09:00.0
(d1) HVM Loader
(d1) Detected Xen v4.6.0
(d1) Xenbus rings @0xfeffc000, event channel 1
(d1) System requested SeaBIOS
(d1) CPU speed is 3700 MHz
(d1) Relocating guest memory for lowmem MMIO space disabled
(d1) PCI-ISA link 0 routed to IRQ5
(d1) PCI-ISA link 1 routed to IRQ10
(d1) PCI-ISA link 2 routed to IRQ11
(d1) PCI-ISA link 3 routed to IRQ5
(d1) pci dev 01:2 INTD->IRQ5
(d1) pci dev 01:3 INTA->IRQ10
(d1) pci dev 02:0 INTA->IRQ11
(d1) pci dev 04:0 INTA->IRQ5
(d1) No RAM in high memory; setting high_mem resource base to 100000000
(d1) pci dev 03:0 bar 10 size 002000000: 0f0000008
(d1) pci dev 02:0 bar 14 size 001000000: 0f2000008
(d1) pci dev 04:0 bar 30 size 000040000: 0f3000000
(d1) pci dev 03:0 bar 30 size 000010000: 0f3040000
(d1) pci dev 03:0 bar 14 size 000001000: 0f3050000
(d1) pci dev 02:0 bar 10 size 000000100: 00000c001
(d1) pci dev 04:0 bar 10 size 000000100: 00000c101
(d1) pci dev 04:0 bar 14 size 000000100: 0f3051000
(d1) pci dev 01:2 bar 20 size 000000020: 00000c201
(d1) pci dev 01:1 bar 20 size 000000010: 00000c221
(d1) Multiprocessor initialisation:
(d1)  - CPU0 ... 46-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1)  - CPU1 ... 46-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1) Writing SMBIOS tables ...
(d1) Loading SeaBIOS ...
(d1) Creating MP tables ...
(d1) Loading ACPI ...
(d1) vm86 TSS at fc00a180
(d1) BIOS map:
(d1)  10000-100d3: Scratch space
(d1)  c0000-fffff: Main BIOS
(d1) E820 table:
(d1)  [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d1)  HOLE: 00000000:000a0000 - 00000000:000c0000
(d1)  [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
(d1)  [02]: 00000000:00100000 - 00000000:3f800000: RAM
(d1)  HOLE: 00000000:3f800000 - 00000000:fc000000
(d1)  [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d1) Invoking SeaBIOS ...
(d1) SeaBIOS (version Debian-1.8.2-1)
(d1) 
(d1) Found Xen hypervisor signature at 40000000
(d1) Running on QEMU (i440fx)
(d1) xen: copy e820...
(d1) Relocating init from 0x000df450 to 0x3f7af480 (size 68288)
(d1) CPU Mhz=3700
(d1) Found 8 PCI devices (max PCI bus is 00)
(d1) Allocated Xen hypercall page at 3f7ff000
(d1) Detected Xen v4.6.0
(d1) xen: copy BIOS tables...
(d1) Copying SMBIOS entry point from 0x00010010 to 0x000f6780
(d1) Copying MPTABLE from 0xfc001160/fc001170 to 0x000f6680
(d1) Copying PIR from 0x00010030 to 0x000f6600
(d1) Copying ACPI RSDP from 0x000100b0 to 0x000f65d0
(d1) Using pmtimer, ioport 0xb008
(d1) Scan for VGA option rom
(d1) Running option rom at c000:0003
(d1) pmm call arg1=0
(d1) Turning on vga text mode console
(d1) SeaBIOS (version Debian-1.8.2-1)
(d1) Machine UUID e1e72ec9-0053-4516-b4e3-0f6a829d7cb5
(d1) UHCI init on dev 00:01.2 (io=c200)
(d1) Found 0 lpt ports
(d1) Found 1 serial ports
(d1) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d1) ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d1) ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (5120 MiBytes)
(d1) Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d1) PS2 keyboard initialized
(d1) All threads complete.
(d1) Scan for option roms
(d1) Running option rom at c980:0003
(d1) pmm call arg1=1
(d1) pmm call arg1=0
(d1) pmm call arg1=1
(d1) pmm call arg1=0
(d1) Searching bootorder for: /pci@i0cf8/*@4
(d1) 
(d1) Press F12 for boot menu.
(d1) 
(d1) Searching bootorder for: HALT
(d1) drive 0x000f6580: PCHS=10402/16/63 translation=lba LCHS=652/255/63 s=10485760
(d1) Space available for UMB: ca800-ef000, f5fa0-f6580
(d1) Returned 258048 bytes of ZoneHigh
(d1) e820 map has 6 items:
(d1)   0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d1)   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d1)   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d1)   3: 0000000000100000 - 000000003f7ff000 = 1 RAM
(d1)   4: 000000003f7ff000 - 000000003f800000 = 2 RESERVED
(d1)   5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d1) enter handle_19:
(d1)   NULL
(d1) Booting from Hard Disk...
(d1) Boot failed: not a bootable disk
(d1) 
(d1) enter handle_18:
(d1)   NULL
(d1) Booting from ROM...
(d1) Booting from c980:0361
(d1) enter handle_18:
(d1)   NULL
(d1) Booting from Floppy...
(d1) Boot failed: could not read the boot disk
(d1) 
(d1) enter handle_18:
(d1)   NULL
(d1) No bootable device.  Retrying in 60 seconds.
(d1) Rebooting.
(d1) In resume (status=0)
(d1) In 32bit resume
(d1) Attempting a hard reboot
(d2) HVM Loader
(d2) Detected Xen v4.6.0
(d2) Xenbus rings @0xfeffc000, event channel 1
(d2) System requested SeaBIOS
(d2) CPU speed is 3700 MHz
(d2) Relocating guest memory for lowmem MMIO space disabled
(d2) PCI-ISA link 0 routed to IRQ5
(d2) PCI-ISA link 1 routed to IRQ10
(d2) PCI-ISA link 2 routed to IRQ11
(d2) PCI-ISA link 3 routed to IRQ5
(d2) pci dev 01:2 INTD->IRQ5
(d2) pci dev 01:3 INTA->IRQ10
(d2) pci dev 02:0 INTA->IRQ11
(d2) pci dev 04:0 INTA->IRQ5
(d2) No RAM in high memory; setting high_mem resource base to 100000000
(d2) pci dev 03:0 bar 10 size 002000000: 0f0000008
(d2) pci dev 02:0 bar 14 size 001000000: 0f2000008
(d2) pci dev 04:0 bar 30 size 000040000: 0f3000000
(d2) pci dev 03:0 bar 30 size 000010000: 0f3040000
(d2) pci dev 03:0 bar 14 size 000001000: 0f3050000
(d2) pci dev 02:0 bar 10 size 000000100: 00000c001
(d2) pci dev 04:0 bar 10 size 000000100: 00000c101
(d2) pci dev 04:0 bar 14 size 000000100: 0f3051000
(d2) pci dev 01:2 bar 20 size 000000020: 00000c201
(d2) pci dev 01:1 bar 20 size 000000010: 00000c221
(d2) Multiprocessor initialisation:
(d2)  - CPU0 ... 46-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d2)  - CPU1 ... 46-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d2) Writing SMBIOS tables ...
(d2) Loading SeaBIOS ...
(d2) Creating MP tables ...
(d2) Loading ACPI ...
(d2) vm86 TSS at fc00a180
(d2) BIOS map:
(d2)  10000-100d3: Scratch space
(d2)  c0000-fffff: Main BIOS
(d2) E820 table:
(d2)  [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d2)  HOLE: 00000000:000a0000 - 00000000:000c0000
(d2)  [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
(d2)  [02]: 00000000:00100000 - 00000000:3f800000: RAM
(d2)  HOLE: 00000000:3f800000 - 00000000:fc000000
(d2)  [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d2) Invoking SeaBIOS ...
(d2) SeaBIOS (version Debian-1.8.2-1)
(d2) 
(d2) Found Xen hypervisor signature at 40000000
(d2) Running on QEMU (i440fx)
(d2) xen: copy e820...
(d2) Relocating init from 0x000df450 to 0x3f7af480 (size 68288)
(d2) CPU Mhz=3701
(d2) Found 8 PCI devices (max PCI bus is 00)
(d2) Allocated Xen hypercall page at 3f7ff000
(d2) Detected Xen v4.6.0
(d2) xen: copy BIOS tables...
(d2) Copying SMBIOS entry point from 0x00010010 to 0x000f6780
(d2) Copying MPTABLE from 0xfc001160/fc001170 to 0x000f6680
(d2) Copying PIR from 0x00010030 to 0x000f6600
(d2) Copying ACPI RSDP from 0x000100b0 to 0x000f65d0
(d2) Using pmtimer, ioport 0xb008
(d2) Scan for VGA option rom
(d2) Running option rom at c000:0003
(d2) pmm call arg1=0
(d2) Turning on vga text mode console
(d2) SeaBIOS (version Debian-1.8.2-1)
(d2) Machine UUID e1e72ec9-0053-4516-b4e3-0f6a829d7cb5
(d2) UHCI init on dev 00:01.2 (io=c200)
(d2) Found 0 lpt ports
(d2) Found 1 serial ports
(d2) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d2) ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d2) ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (5120 MiBytes)
(d2) Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d2) PS2 keyboard initialized
(d2) All threads complete.
(d2) Scan for option roms
(d2) Running option rom at c980:0003
(d2) pmm call arg1=1
(d2) pmm call arg1=0
(d2) pmm call arg1=1
(d2) pmm call arg1=0
(d2) Searching bootorder for: /pci@i0cf8/*@4
(d2) 
(d2) Press F12 for boot menu.
(d2) 
(d2) Searching bootorder for: HALT
(d2) drive 0x000f6580: PCHS=10402/16/63 translation=lba LCHS=652/255/63 s=10485760
(d2) Space available for UMB: ca800-ef000, f5fa0-f6580
(d2) Returned 258048 bytes of ZoneHigh
(d2) e820 map has 6 items:
(d2)   0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d2)   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d2)   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d2)   3: 0000000000100000 - 000000003f7ff000 = 1 RAM
(d2)   4: 000000003f7ff000 - 000000003f800000 = 2 RESERVED
(d2)   5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d2) enter handle_19:
(d2)   NULL
(d2) Booting from Hard Disk...
(d2) Boot failed: not a bootable disk
(d2) 
(d2) enter handle_18:
(d2)   NULL
(d2) Booting from ROM...
(d2) Booting from c980:0361
(d2) enter handle_18:
(d2)   NULL
(d2) Booting from Floppy...
(d2) Boot failed: could not read the boot disk
(d2) 
(d2) enter handle_18:
(d2)   NULL
(d2) No bootable device.  Retrying in 60 seconds.
(d2) Rebooting.
(d2) In resume (status=0)
(d2) In 32bit resume
(d2) Attempting a hard reboot
(d3) HVM Loader
(d3) Detected Xen v4.6.0
(d3) Xenbus rings @0xfeffc000, event channel 1
(d3) System requested SeaBIOS
(d3) CPU speed is 3700 MHz
(d3) Relocating guest memory for lowmem MMIO space disabled
(d3) PCI-ISA link 0 routed to IRQ5
(d3) PCI-ISA link 1 routed to IRQ10
(d3) PCI-ISA link 2 routed to IRQ11
(d3) PCI-ISA link 3 routed to IRQ5
(d3) pci dev 01:2 INTD->IRQ5
(d3) pci dev 01:3 INTA->IRQ10
(d3) pci dev 02:0 INTA->IRQ11
(d3) pci dev 04:0 INTA->IRQ5
(d3) No RAM in high memory; setting high_mem resource base to 100000000
(d3) pci dev 03:0 bar 10 size 002000000: 0f0000008
(d3) pci dev 02:0 bar 14 size 001000000: 0f2000008
(d3) pci dev 04:0 bar 30 size 000040000: 0f3000000
(d3) pci dev 03:0 bar 30 size 000010000: 0f3040000
(d3) pci dev 03:0 bar 14 size 000001000: 0f3050000
(d3) pci dev 02:0 bar 10 size 000000100: 00000c001
(d3) pci dev 04:0 bar 10 size 000000100: 00000c101
(d3) pci dev 04:0 bar 14 size 000000100: 0f3051000
(d3) pci dev 01:2 bar 20 size 000000020: 00000c201
(d3) pci dev 01:1 bar 20 size 000000010: 00000c221
(d3) Multiprocessor initialisation:
(d3)  - CPU0 ... 46-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d3)  - CPU1 ... 46-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d3) Writing SMBIOS tables ...
(d3) Loading SeaBIOS ...
(d3) Creating MP tables ...
(d3) Loading ACPI ...
(d3) vm86 TSS at fc00a180
(d3) BIOS map:
(d3)  10000-100d3: Scratch space
(d3)  c0000-fffff: Main BIOS
(d3) E820 table:
(d3)  [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d3)  HOLE: 00000000:000a0000 - 00000000:000c0000
(d3)  [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
(d3)  [02]: 00000000:00100000 - 00000000:3f800000: RAM
(d3)  HOLE: 00000000:3f800000 - 00000000:fc000000
(d3)  [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d3) Invoking SeaBIOS ...
(d3) SeaBIOS (version Debian-1.8.2-1)
(d3) 
(d3) Found Xen hypervisor signature at 40000000
(d3) Running on QEMU (i440fx)
(d3) xen: copy e820...
(d3) Relocating init from 0x000df450 to 0x3f7af480 (size 68288)
(d3) CPU Mhz=3700
(d3) Found 8 PCI devices (max PCI bus is 00)
(d3) Allocated Xen hypercall page at 3f7ff000
(d3) Detected Xen v4.6.0
(d3) xen: copy BIOS tables...
(d3) Copying SMBIOS entry point from 0x00010010 to 0x000f6780
(d3) Copying MPTABLE from 0xfc001160/fc001170 to 0x000f6680
(d3) Copying PIR from 0x00010030 to 0x000f6600
(d3) Copying ACPI RSDP from 0x000100b0 to 0x000f65d0
(d3) Using pmtimer, ioport 0xb008
(d3) Scan for VGA option rom
(d3) Running option rom at c000:0003
(d3) pmm call arg1=0
(d3) Turning on vga text mode console
(d3) SeaBIOS (version Debian-1.8.2-1)
(d3) Machine UUID e1e72ec9-0053-4516-b4e3-0f6a829d7cb5
(d3) UHCI init on dev 00:01.2 (io=c200)
(d3) Found 0 lpt ports
(d3) Found 1 serial ports
(d3) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d3) ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d3) ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (5120 MiBytes)
(d3) Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d3) PS2 keyboard initialized
(d3) All threads complete.
(d3) Scan for option roms
(d3) Running option rom at c980:0003
(d3) pmm call arg1=1
(d3) pmm call arg1=0
(d3) pmm call arg1=1
(d3) pmm call arg1=0
(d3) Searching bootorder for: /pci@i0cf8/*@4
(d3) 
(d3) Press F12 for boot menu.
(d3) 
(d3) Searching bootorder for: HALT
(d3) drive 0x000f6580: PCHS=10402/16/63 translation=lba LCHS=652/255/63 s=10485760
(d3) Space available for UMB: ca800-ef000, f5fa0-f6580
(d3) Returned 258048 bytes of ZoneHigh
(d3) e820 map has 6 items:
(d3)   0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d3)   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d3)   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d3)   3: 0000000000100000 - 000000003f7ff000 = 1 RAM
(d3)   4: 000000003f7ff000 - 000000003f800000 = 2 RESERVED
(d3)   5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d3) enter handle_19:
(d3)   NULL
(d3) Booting from Hard Disk...
(d3) Boot failed: not a bootable disk
(d3) 
(d3) enter handle_18:
(d3)   NULL
(d3) Booting from ROM...
(d3) Booting from c980:0361