Xen 4.12-unstable (c/s Fri Sep 7 11:41:31 2018 +0100 git:1d069e45f7) EFI loader Xen 4.12-unstable (XEN) Xen version 4.12-unstable () (aarch64-linux-gnu-gcc (Debian 6.3.0-18) 6.3.0 20170516) debug=y Tue Nov 6 00:45:38 NZDT 2018 (XEN) Latest ChangeSet: Fri Sep 7 11:41:31 2018 +0100 git:1d069e45f7 (XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4 (XEN) 64-bit Execution: (XEN) Processor Features: 0000000000002222 0000000000000000 (XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32 (XEN) Extensions: FloatingPoint AdvancedSIMD (XEN) Debug Features: 0000000010305106 0000000000000000 (XEN) Auxiliary Features: 0000000000000000 0000000000000000 (XEN) Memory Model Features: 0000000000001122 0000000000000000 (XEN) ISA Features: 0000000000011120 0000000000000000 (XEN) 32-bit Execution: (XEN) Processor Features: 00000131:00011011 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle (XEN) Extensions: GenericTimer Security (XEN) Debug Features: 03010066 (XEN) Auxiliary Features: 00000000 (XEN) Memory Model Features: 10201105 40000000 01260000 02102211 (XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121 (XEN) Using SMC Calling Convention v1.1 (XEN) Using PSCI v1.1 (XEN) SMP: Allowing 8 CPUs (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 1920 KHz (XEN) GICv2 initialization: (XEN) gic_dist_addr=00000000e82b1000 (XEN) gic_cpu_addr=00000000e82b2000 (XEN) gic_hyp_addr=00000000e82b4000 (XEN) gic_vcpu_addr=00000000e82b6000 (XEN) gic_maintenance_irq=25 (XEN) GICv2: 384 lines, 8 cpus, secure (IID 0200143b). (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Allocated console ring of 64 KiB. (XEN) Bringing up CPU1 (XEN) Failed to bring up CPU1 (XEN) Failed to bring up CPU 1 (error -9) (XEN) Bringing up CPU2 (XEN) Failed to bring up CPU2 (XEN) Failed to bring up CPU 2 (error -9) (XEN) Bringing up CPU3 (XEN) Failed to bring up CPU3 (XEN) Failed to bring up CPU 3 (error -9) (XEN) Bringing up CPU4 (XEN) Failed to bring up CPU4 (XEN) Failed to bring up CPU 4 (error -9) (XEN) Bringing up CPU5 (XEN) Failed to bring up CPU5 (XEN) Failed to bring up CPU 5 (error -9) (XEN) Bringing up CPU6 (XEN) Failed to bring up CPU6 (XEN) Failed to bring up CPU 6 (error -9) (XEN) Bringing up CPU7 (XEN) Failed to bring up CPU7 (XEN) Failed to bring up CPU 7 (error -9) (XEN) Brought up 1 CPUs (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID (XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558 (XEN) I/O virtualisation disabled (XEN) build-id: 6cefdc2172cd6ea6e6e8bc90c7842d2cac723219 (XEN) alternatives: Patching with alt table 00000000002a3b40 -> 00000000002a40d4 (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading kernel from boot module @ 00000000b8885000 (XEN) Allocating 1:1 mappings totalling 512MB for dom0: (XEN) BANK[0] 0x000000c0000000-0x000000e0000000 (512MB) (XEN) Grant table range: 0x0000021fe00000-0x0000021fe40000 (XEN) Allocating PPI 16 for event channel interrupt (XEN) Loading zImage from 00000000b8885000 to 00000000c0080000-00000000c1167200 (XEN) Loading dom0 DTB to 0x00000000c8000000-0x00000000c800a4cf (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs (XEN) ....................................................................done. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *************************************************** (XEN) PLEASE SPECIFY dom0_mem PARAMETER - USING 512M FOR NOW (XEN) *************************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 280kB init memory. (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER20 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER24 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER28 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER32 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER36 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER40 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER44 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc7-linaro-hikey960+ () (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #8 SMP PREEMPT Mon Nov 5 19:57:52 NZDT 2018 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine model: HiKey960 [ 0.000000] Xen 4.12 support found [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x00000000df000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000dfffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xdefb6800-0xdefb82ff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000c0000000-0x00000000dfffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000dfffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000c0000000-0x00000000dfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 23 pages/cpu @ffff80001ef9c000 s55448 r8192 d30568 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: console=tty0 console=hvc0 root=/dev/sdd10 rw efi=noruntime [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Memory: 473320K/524288K available (10236K kernel code, 1180K rwdata, 4684K rodata, 1152K init, 405K bss, 34584K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff000008a80000 ( 10240 KB) [ 0.000000] .rodata : 0xffff000008a80000 - 0xffff000008f20000 ( 4736 KB) [ 0.000000] .init : 0xffff000008f20000 - 0xffff000009040000 ( 1152 KB) [ 0.000000] .data : 0xffff000009040000 - 0xffff000009167200 ( 1181 KB) [ 0.000000] .bss : 0xffff000009167200 - 0xffff0000091cc960 ( 406 KB) [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000000000 - 0xffff7e0000800000 ( 8 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff800020000000 ( 512 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns [ 0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns [ 0.000105] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns [ 0.000577] Console: colour dummy device 80x25 [ 0.000885] console [tty0] enabled [ 0.342158] console [hvc0] enabled [ 0.345707] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680) [ 0.355786] pid_max: default: 32768 minimum: 301 [ 0.360522] Security Framework initialized [ 0.364807] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.371747] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.378621] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.385288] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.408528] ASID allocator initialised with 65536 entries [ 0.414639] xen:grant_table: Grant tables using version 1 layout [ 0.420588] Grant table initialized [ 0.424137] xen:events: Using FIFO-based ABI [ 0.428530] Xen: initializing cpu0 [ 0.436479] Hierarchical SRCU implementation. [ 0.449785] EFI services will not be available. [ 0.462263] smp: Bringing up secondary CPUs ... [ 0.466703] smp: Brought up 1 node, 1 CPU [ 0.470776] SMP: Total of 1 processors activated. [ 0.475553] CPU features: detected feature: 32-bit EL0 Support [ 0.481514] CPU: All CPU(s) started at EL1 [ 0.485620] alternatives: patching kernel code [ 0.491125] devtmpfs: initialized [ 0.499442] random: get_random_u32 called from bucket_table_alloc+0xf8/0x280 with crng_init=0 [ 0.512329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.522020] futex hash table entries: 256 (order: 3, 32768 bytes) [ 0.528755] pinctrl core: initialized pinctrl subsystem [ 0.534123] random: fast init done [ 0.539802] DMI not present or invalid. [ 0.545483] NET: Registered protocol family 16 [ 0.554645] vdso: 2 pages (1 code @ ffff000008a86000, 1 data @ ffff000009045000) [ 0.563385] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.570857] DMA: preallocated 256 KiB pool for atomic allocations [ 0.577119] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB [ 0.585539] software IO TLB [mem 0xdd000000-0xdd400000] (4MB) mapped at [ffff80001d000000-ffff80001d3fffff] [ 0.596051] Serial: AMBA PL011 UART driver [ 0.624374] hi3660-mbox e896b000.mailbox: Mailbox enabled [ 0.644308] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe [ 0.662034] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe [ 0.941352] Synchronous External Abort: synchronous external abort (0x96000210) at 0xffff0000093fdfe0 [ 0.950601] Internal error: : 96000210 [#1] PREEMPT SMP [ 0.955866] Modules linked in: [ 0.958990] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc7-linaro-hikey960+ #8 [ 0.966791] Hardware name: HiKey960 (DT) [ 0.970777] task: ffff80001d900000 task.stack: ffff000008058000 [ 0.976778] PC is at amba_device_try_add+0x108/0x260 [ 0.981791] LR is at amba_device_try_add+0xf0/0x260 [ 0.986735] pc : [] lr : [] pstate: 60000045 [ 0.994192] sp : ffff00000805bbf0 [ 0.997572] x29: ffff00000805bbf0 x28: 0000000000000000 [ 1.002953] x27: ffff0000090203a8 x26: 0000000000000000 [ 1.008326] x25: ffff80001dbf9810 x24: 0000000000000000 [ 1.013702] x23: ffff0000093fd000 x22: 0000000000001000 [ 1.019079] x21: ffff80001cc1b6f8 x20: 0000000000000000 [ 1.024455] x19: ffff80001cc1b400 x18: 0000000000000010 [ 1.029832] x17: 0000000000000001 x16: 00000000deadbeef [ 1.035209] x15: 0000000000000006 x14: ffffffffffffffff [ 1.040585] x13: 0000000000000020 x12: 0101010101010101 [ 1.045962] x11: 0000000000000020 x10: 0101010101010101 [ 1.051338] x9 : 0000000000000000 x8 : ffff80001cc0cf00 [ 1.056717] x7 : 0000000000000000 x6 : 000000000000003f [ 1.062092] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.067468] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.072845] x1 : ffff80001d900000 x0 : ffff0000093fdfe0 [ 1.078223] Process swapper/0 (pid: 1, stack limit = 0xffff000008058000) [ 1.084989] Call trace: [ 1.087504] Exception stack(0xffff00000805bab0 to 0xffff00000805bbf0) [ 1.094008] baa0: ffff0000093fdfe0 ffff80001d900000 [ 1.101902] bac0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 1.109790] bae0: 000000000000003f 0000000000000000 ffff80001cc0cf00 0000000000000000 [ 1.117684] bb00: 0101010101010101 0000000000000020 0101010101010101 0000000000000020 [ 1.125576] bb20: ffffffffffffffff 0000000000000006 00000000deadbeef 0000000000000001 [ 1.133468] bb40: 0000000000000010 ffff80001cc1b400 0000000000000000 ffff80001cc1b6f8 [ 1.141356] bb60: 0000000000001000 ffff0000093fd000 0000000000000000 ffff80001dbf9810 [ 1.149248] bb80: 0000000000000000 ffff0000090203a8 0000000000000000 ffff00000805bbf0 [ 1.157139] bba0: ffff0000084ead90 ffff00000805bbf0 ffff0000084eada8 0000000060000045 [ 1.165034] bbc0: ffff00000805bbf0 ffff0000084ead90 ffffffffffffffff 00000000fffffffe [ 1.172921] bbe0: ffff00000805bbf0 ffff0000084eada8 [ 1.177865] [] amba_device_try_add+0x108/0x260 [ 1.183935] [] amba_device_add+0x1c/0xd8 [ 1.189493] [] of_platform_bus_create+0x26c/0x300 [ 1.195814] [] of_platform_bus_create+0x124/0x300 [ 1.202145] [] of_platform_populate+0x4c/0xb0 [ 1.208135] [] of_platform_default_populate_init+0x64/0x78 [ 1.215247] [] do_one_initcall+0x38/0x120 [ 1.220882] [] kernel_init_freeable+0x184/0x224 [ 1.227038] [] kernel_init+0x10/0x100 [ 1.232323] [] ret_from_fork+0x10/0x18 [ 1.237703] Code: d10082c0 52800002 8b0002e0 52800018 (b9400001) [ 1.243880] ---[ end trace dcbf70aa30c979a8 ]--- [ 1.248573] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.248573] [ 1.257826] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.257826]