Using modules provided by bootloader in FDT Xen 4.12.0 (c/s ) EFI loader Xen 4.12.0 (XEN) Xen version 4.12.0 (@) (gcc (Alpine 6.4.0) 6.4.0) debug=n Fri Jun 7 17:32:08 UTC 2019 (XEN) Latest ChangeSet: (XEN) Processor: 410fd033: "ARM Limited", variant: 0x0, part 0xd03, rev 0x3 (XEN) 64-bit Execution: (XEN) Processor Features: 0000000000002222 0000000000000000 (XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32 (XEN) Extensions: FloatingPoint AdvancedSIMD (XEN) Debug Features: 0000000010305106 0000000000000000 (XEN) Auxiliary Features: 0000000000000000 0000000000000000 (XEN) Memory Model Features: 0000000000001122 0000000000000000 (XEN) ISA Features: 0000000000011120 0000000000000000 (XEN) 32-bit Execution: (XEN) Processor Features: 00000131:00011011 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle (XEN) Extensions: GenericTimer Security (XEN) Debug Features: 03010066 (XEN) Auxiliary Features: 00000000 (XEN) Memory Model Features: 10101105 40000000 01260000 02102211 (XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121 (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 1200 KHz (XEN) GICv2 initialization: (XEN) gic_dist_addr=00000000f6801000 (XEN) gic_cpu_addr=00000000f6802000 (XEN) gic_hyp_addr=00000000f6804000 (XEN) gic_vcpu_addr=00000000f6806000 (XEN) gic_maintenance_irq=25 (XEN) GICv2: 160 lines, 8 cpus, secure (IID 0200143b). (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) (XEN) Initializing Credit2 scheduler (XEN) Allocated console ring of 16 KiB. (XEN) Bringing up CPU1 (XEN) Bringing up CPU2 (XEN) Bringing up CPU3 (XEN) Bringing up CPU4 (XEN) Bringing up CPU5 (XEN) Bringing up CPU6 (XEN) Bringing up CPU7 (XEN) Brought up 8 CPUs (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID (XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558 (XEN) I/O virtualisation disabled (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading Domd0 kernel from boot module @ 0000000048d38000 (XEN) Loading ramdisk from boot module @ 0000000047aa6000 (XEN) Allocating 1:1 mappings totalling 1024MB for dom0: (XEN) WARNING: Failed to allocate requested dom0 memory. 624MB unallocated (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB) (XEN) BANK[1] 0x00000036000000-0x0000003e000000 (128MB) (XEN) BANK[2] 0x00000040000000-0x00000047000000 (112MB) (XEN) BANK[3] 0x0000007b000000-0x0000007c000000 (16MB) (XEN) BANK[4] 0x0000007e000000-0x0000007f000000 (16MB) (XEN) Grant table range: 0x00000047998000-0x000000479d8000 (XEN) Allocating PPI 16 for event channel interrupt (XEN) Loading zImage from 0000000048d38000 to 0000000008080000-0000000009233200 (XEN) Loading dom0 initrd from 0000000047aa6000 to 0x000000000ec00000-0x000000000fe90104 (XEN) Loading dom0 DTB to 0x000000000ea00000-0x000000000ea08b89 (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Scrubbing Free RAM in background (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input) (XEN) Freed 308kB init memory. (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16 (XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd033] [ 0.000000] Linux version 4.19.5 (root@350845ae5335) (gcc version 6.3.0 (Alpine 6.3.0)) #1 SMP PREEMPT Sat Sep 7 06:30:56 UTC 2019 [ 0.000000] Machine model: HiKey Development Board [ 0.000000] Xen 4.12 support found [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000036000000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007effffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7efc29c0-0x7efc417f] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000008000000-0x000000007effffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000008000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000036000000-0x000000003dffffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000046ffffff] [ 0.000000] node 0: [mem 0x000000007b000000-0x000000007bffffff] [ 0.000000] node 0: [mem 0x000000007e000000-0x000000007effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000008000000-0x000000007effffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x414 with crng_init=0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56664 r8192 d29352 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 843419 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] CPU features: enabling workaround for Speculative Store Bypass Disable [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 100800 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=hvc0 root=(hd1,gpt1)/rootfs.img rootdelay=3 setup_loops eve_installer [ 0.000000] Memory: 207828K/409600K available (10108K kernel code, 1676K rwdata, 5016K rodata, 1280K init, 376K bss, 70700K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000005] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns [ 0.000358] arch_timer: cp15 timer(s) running at 1.20MHz (virt). [ 0.000367] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns [ 0.000523] Console: colour dummy device 80x25 [ 0.306059] console [hvc0] enabled [ 0.309582] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800) [ 0.319680] pid_max: default: 32768 minimum: 301 [ 0.324415] Security Framework initialized [ 0.328704] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.335655] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.342531] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.349190] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.380581] ASID allocator initialised with 32768 entries [ 0.386508] xen:grant_table: Grant tables using version 1 layout [ 0.392443] Grant table initialized [ 0.395984] xen:events: Using FIFO-based ABI [ 0.400359] Xen: initializing cpu0 [ 0.408456] rcu: Hierarchical SRCU implementation. [ 0.425167] EFI services will not be available. [ 0.437814] smp: Bringing up secondary CPUs ... [ 0.442266] smp: Brought up 1 node, 1 CPU [ 0.446328] SMP: Total of 1 processors activated. [ 0.451105] CPU features: detected: 32-bit EL0 Support [ 0.459388] CPU: All CPU(s) started at EL1 [ 0.463399] alternatives: patching kernel code [ 0.468730] devtmpfs: initialized [ 0.480343] Registered cp15_barrier emulation handler [ 0.485337] Registered setend emulation handler [ 0.490186] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.499875] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.509160] pinctrl core: initialized pinctrl subsystem [ 0.517095] DMI not present or invalid. [ 0.522736] NET: Registered protocol family 16 [ 0.527768] audit: initializing netlink subsys (disabled) [ 0.534948] audit: type=2000 audit(0.332:1): state=initialized audit_enabled=0 res=1 [ 0.544301] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.552939] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.560673] DMA: preallocated 256 KiB pool for atomic allocations [ 0.566899] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB [ 0.575303] software IO TLB: mapped [mem 0x7e000000-0x7e400000] (4MB) [ 0.583694] Serial: AMBA PL011 UART driver [ 0.593263] hi6220-mbox f7510000.mailbox: Mailbox enabled [ 0.611068] OF: amba_device_add() failed (-19) for /soc/uart@f7111000 [ 0.619809] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 39, base_baud = 0) is a PL011 rev2 [ 0.673852] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.684674] cryptd: max_cpu_qlen set to 1000 [ 0.697459] ACPI: Interpreter disabled. [ 0.702722] xen:balloon: Initialising balloon driver [ 0.709715] vgaarb: loaded [ 0.713670] SCSI subsystem initialized [ 0.722333] usbcore: registered new interface driver usbfs [ 0.728422] usbcore: registered new interface driver hub [ 0.733778] usbcore: registered new device driver usb [ 0.740408] pps_core: LinuxPPS API ver. 1 registered [ 0.746193] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.755357] PTP clock support registered [ 0.759712] EDAC MC: Ver: 3.0.0 [ 0.768915] clocksource: Switched to clocksource arch_sys_counter [ 0.775550] VFS: Disk quotas dquot_6.6.0 [ 0.779514] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.786570] pnp: PnP ACPI: disabled [ 0.801949] OF: /soc/thermal-zones/cls0/cooling-maps/map0: could not find phandle [ 0.811432] missing cooling_device property [ 0.815652] failed to build thermal zone cls0: -22 [ 0.820716] NET: Registered protocol family 2 [ 0.825476] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.833170] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.840220] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.846707] TCP: Hash tables configured (established 4096 bind 4096) [ 0.853159] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.858982] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.865396] NET: Registered protocol family 1 [ 0.869900] Unpacking initramfs... [ 1.034611] Freeing initrd memory: 19008K [ 1.039139] kvm [1]: HYP mode not available [ 1.046148] Initialise system trusted keyrings [ 1.051849] workingset: timestamp_bits=44 max_order=17 bucket_order=0 [ 1.072372] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.079690] 9p: Installing v9fs 9p2000 file system support [ 1.085867] pstore: using deflate compression [ 1.093311] Key type asymmetric registered [ 1.097480] Asymmetric key parser 'x509' registered [ 1.102370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.113992] io scheduler noop registered [ 1.117863] io scheduler deadline registered [ 1.122351] io scheduler cfq registered (default) [ 1.127024] io scheduler mq-deadline registered [ 1.131575] io scheduler kyber registered [ 1.143303] pinctrl-single f7010000.pinmux: 159 pins, size 636 [ 1.150169] pinctrl-single f8001800.pinmux: 30 pins, size 120 [ 1.156764] pinctrl-single f7010800.pinmux: 163 pins, size 652 [ 1.166503] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered [ 1.176446] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered [ 1.184926] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered [ 1.193548] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered [ 1.201829] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered [ 1.210189] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered [ 1.218526] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered [ 1.226872] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered [ 1.235228] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered [ 1.243555] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered [ 1.251892] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered [ 1.260227] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered [ 1.268581] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered [ 1.277012] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered [ 1.285344] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered [ 1.293629] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered [ 1.301650] gpio gpiochip16: names 9 do not match number of GPIOs 8 [ 1.308161] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered [ 1.316065] gpio gpiochip17: names 9 do not match number of GPIOs 8 [ 1.322530] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered [ 1.330721] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered [ 1.339059] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered [ 1.352186] EINJ: ACPI disabled. [ 1.365062] k3-dma f7370000.dma: initialized [ 1.376473] xen:xen_evtchn: Event-channel device installed [ 1.393374] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.403639] SuperH (H)SCI(F) driver initialized [ 1.410430] msm_serial: driver initialized [ 1.416034] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.428708] loop: module loaded [ 1.433170] Invalid max_queues (4), will use default max: 1. [ 1.441835] VDD_3V3: supplied by SYS_5V [ 1.451934] libphy: Fixed MDIO Bus: probed [ 1.461380] tun: Universal TUN/TAP device driver, 1.6 [ 1.468800] xen_netfront: Initialising Xen virtual ethernet driver [ 1.475644] usbcore: registered new interface driver asix [ 1.481393] usbcore: registered new interface driver ax88179_178a [ 1.487737] VFIO - User Level meta-driver version: 0.3 [ 1.498275] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.505125] ehci-pci: EHCI PCI platform driver [ 1.509602] ehci-platform: EHCI generic platform driver [ 1.515023] ehci-orion: EHCI orion driver [ 1.519204] ehci-exynos: EHCI EXYNOS driver [ 1.523487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.529664] ohci-pci: OHCI PCI platform driver [ 1.534185] ohci-platform: OHCI generic platform driver [ 1.539599] ohci-exynos: OHCI EXYNOS driver [ 1.544422] usbcore: registered new interface driver usb-storage [ 1.550767] usbcore: registered new interface driver usbserial_generic [ 1.557369] usbserial: USB Serial support registered for generic [ 1.564597] input: HISI 65xx PowerOn Key as /devices/platform/f8000000.pmic/hi65xx-powerkey.0.auto/input/input0 [ 1.577217] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc0 [ 1.585069] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc1 [ 1.592854] i2c /dev entries driver [ 1.603297] hisi_thermal f7030700.tsensor: failed to register sensor id 2: -517 [ 1.610923] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -517 [ 1.619986] sp805-wdt f8005000.watchdog: registration successful [ 1.628262] sdhci: Secure Digital Host Controller Interface driver [ 1.635317] sdhci: Copyright(c) Pierre Ossman [ 1.640194] Synopsys Designware Multimedia Card Interface Driver [ 1.647426] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 1.657792] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode. [ 1.664820] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller. [ 1.671144] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a [ 1.676535] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 11,32 bit host data width,128 deep fifo [ 1.685919] dwmmc_k3 f723f000.dwmmc2: Linked as a consumer to regulator.1 [ 1.692756] dwmmc_k3 f723f000.dwmmc2: allocated mmc-pwrseq [ 1.698234] mmc_host mmc0: card is non-removable. [ 1.715886] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 1.738334] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default [ 1.748623] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode. [ 1.759678] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller. [ 1.766000] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a [ 1.771353] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range [ 1.779627] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 19,32 bit host data width,128 deep fifo [ 1.789015] dwmmc_k3 f723e000.dwmmc1: Linked as a consumer to regulator.5 [ 1.795855] dwmmc_k3 f723e000.dwmmc1: Linked as a consumer to regulator.4 [ 1.802701] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO [ 1.815650] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 1.825351] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 1.837386] mmc0: new SDIO card at address 0001 [ 1.848301] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default [ 1.858520] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode. [ 1.865442] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller. [ 1.871792] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a [ 1.877156] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 20,32 bit host data width,256 deep fifo [ 1.886580] dwmmc_k3 f723d000.dwmmc0: Linked as a consumer to regulator.10 [ 1.893489] mmc_host mmc2: card is non-removable. [ 1.908924] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 1.930257] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.939572] ledtrig-cpu: registered to indicate activity on CPUs [ 1.949125] usbcore: registered new interface driver usbhid [ 1.955897] usbhid: USB HID core driver [ 1.959805] mmc_host mmc1: Bus speed (slot 0) = 99200000Hz (slot req 100000000Hz, actual 99200000HZ div = 0) [ 1.972557] optee: probing for conduit method from DT. [ 1.978784] mmc1: new ultra high speed SDR50 SDHC card at address 0007 [ 1.985336] optee: api uid mismatch [ 1.989914] NET: Registered protocol family 10 [ 1.995351] mmcblk1: mmc1:0007 APUSD 14.9 GiB [ 2.004480] Segment Routing with IPv6 [ 2.008362] NET: Registered protocol family 17 [ 2.013048] 9pnet: Installing 9P2000 support [ 2.017391] Initialising Xen transport for 9pfs [ 2.022295] Key type dns_resolver registered [ 2.027894] registered taskstats version 1 [ 2.032485] Loading compiled-in X.509 certificates [ 2.037322] mmc_host mmc2: Bus speed (slot 0) = 198400000Hz (slot req 200000000Hz, actual 198400000HZ div = 0) [ 2.047721] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.060365] mmc2: new HS200 MMC card at address 0001 [ 2.065292] GPT:716799 != 31293439 [ 2.068712] GPT:Alternate GPT header not at the end of the disk. [ 2.075792] mmcblk2: mmc2:0001 8GND3R 7.28 GiB [ 2.081014] mmcblk2boot0: mmc2:0001 8GND3R partition 1 4.00 MiB [ 2.086860] GPT:716799 != 31293439 [ 2.090340] GPT: Use GNU Parted to correct GPT errors. [ 2.096117] mmcblk2boot1: mmc2:0001 8GND3R partition 2 4.00 MiB [ 2.101987] mmcblk1: p1 p4 p5 [ 2.105288] mmcblk2rpmb: mmc2:0001 8GND3R partition 3 512 KiB, chardev (239:0) [ 2.114352] random: fast init done [ 2.118162] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 22, base_baud = 0) is a PL011 rev2 [ 2.129039] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p11 p12 p13 p14 p19 [ 2.135215] 5V_HUB: supplied by SYS_5V [ 2.140858] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022 [ 2.151031] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to (____ptrval____) [ 2.159970] ssp-pl022 f7106000.spi: setup for DMA on RX dma0chan0, TX dma0chan1 [ 2.171888] phy phy-soc:usbphy.0: Linked as a consumer to regulator.13 [ 2.180180] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator [ 2.188677] dwc2 f72c0000.usb: Linked as a consumer to regulator.0 [ 2.194927] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator [ 2.412917] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM [ 2.420855] dwc2 f72c0000.usb: DWC OTG Controller [ 2.425628] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1 [ 2.432644] dwc2 f72c0000.usb: irq 13, io mem 0xf72c0000 [ 2.438650] hub 1-0:1.0: USB hub found [ 2.442445] hub 1-0:1.0: 1 port detected [ 2.448536] hisi_thermal f7030700.tsensor: failed to register sensor id 2: -517 [ 2.456035] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -517 [ 2.464950] hisi_thermal f7030700.tsensor: failed to register sensor id 2: -517 [ 2.472222] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -517 [ 2.480287] rtc-pl031 f8004000.rtc: setting system clock to 1970-01-01 00:03:20 UTC (200) [ 2.489072] LDO2_2V8: disabling [ 2.492121] LDO13_1V8: disabling [ 2.495455] LDO14_2V8: disabling [ 2.498774] LDO17_2V5: disabling [ 2.503100] Freeing unused kernel memory: 1280K [ 2.507711] Run /init as init process Alpine Init 3.3.0-EVE * Loading boot drivers: ok. * Mounting boot media: [ 2.840976] dwc2 f72c0000.usb: Set speed to high-speed [ 2.847639] usb 1-1: new high-speed USB device number 2 using dwc2 [ 3.040905] dwc2 f72c0000.usb: Set speed to high-speed [ 3.065802] hub 1-1:1.0: USB hub found [ 3.070089] hub 1-1:1.0: 3 ports detected [ 3.077528] hisi_thermal f7030700.tsensor: failed to register sensor id 2: -517 [ 3.086064] hisi_thermal f7030700.tsensor: failed to register thermal sensor: -517 [ 3.292586] EXT4-fs (mmcblk2p19): mounting ext3 file system using the ext4 subsystem [ 3.307573] EXT4-fs (mmcblk2p19): mounted filesystem with ordered data mode. Opts: (null) ok. * Setting up loopback block devices: ok. * Launching EVE installer.: WARNING: found multiple free disks mmcblk2 mmcblk2boot0 mmcblk2boot1, installing on the first one [ 4.243686] random: rngd: uninitialized urandom read (8 bytes read) [ 4.250044] random: rngd: uninitialized urandom read (8 bytes read) [ 4.256402] random: crng init done 1970/01/01 00:03:22 Wrote 224 bytes of entropy, exiting as oneshot Found Android GPT partition table on /dev/mmcblk2 [ 5.366744] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p12 p13 p14 p19