[Xen-fr] HVM et OpenBSD

["Cabillot Julien" <jcabillot@xxxxxxxxx>]

Bonjour,
je me suis dit que Ãa pourrait intÃresser des gens vu que je n'avais rien trouvà sur google pour ma part.
Voila OpenBSD 4.1-current (version cvs) fonctionne trÃs bien en mode HVM sous xen 3.1 (sur un core2duo):

OpenBSD 4.1-current (GENERIC) #328: Wed Jul 11 20:22:58 MDT 2007
    deraadt@xxxxxxxxxxxxxxxx:/usr/src/sys/arch/i386

/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,MMX,FXSR,SSE,SSE2,SS,SBF,SSE3,DS-CPL,CX16,xTPR
real mem  = 33099776 (31MB)
avail mem = 22851584 (21MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xfa370, SMBIOS rev. 2.4 @ 0xe901f (10 entries)
bios0: Xen HVM domU
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfa610/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 2048MB, 4194306 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
pciide0: channel 1 disabled (no drives)
piixpm0 at pci0 dev 1 function 2 "Intel 82371AB Power" rev 0x01: SMBus disabled
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
unknown vendor 0x5853 product 0x0001 (class undefined unknown subclass 0x80, rev 0x01) at pci0 dev 3 function 0 not configured
re0 at pci0 dev 4 function 0 "Realtek 8139" rev 0x20: RTL8139C+ (0x7480), irq 5, address 00:16:3e:33:71:92
rlphy0 at re0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
biomask efdd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
clock: unknown CMOS layout
re0: watchdog timeout

-- 
Julien Cabillot
Administrateur SI
Direction InterrÃgionale des Services PÃnitentiaires de Strasbourg
_______________________________________________
Xen-fr mailing list
Xen-fr@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-fr