[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[XenPPC] JS21+SLOF+IBM Power RAID?
I get the following linux output on the when running in DOM0.
I'm hoping its a Linux config, any thoughts?
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:08.1
AMD8111: chipset revision 3
AMD8111: 0000:00:08.1 (rev 03) UDMA133 controller
AMD8111: 100% native mode on irq 16
ide0: BM-DMA at 0x9020-0x9027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x9028-0x902f, BIOS settings: hdc:pio, hdd:pio
ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
ipr 0000:01:01.0: Found IOA with IRQ: 15
ipr 0000:01:01.0: Starting IOA initialization sequence.
ipr 0000:01:01.0: Permanent IOA failure. 0x00000002
ipr 0000:01:01.0: Initializing IOA.
ipr 0000:01:01.0: Starting IOA initialization sequence.
ipr 0000:01:01.0: Permanent IOA failure. 0x04000000
ipr 0000:01:01.0: Initializing IOA.
ipr 0000:01:01.0: Starting IOA initialization sequence.
ipr 0000:01:01.0: Permanent IOA failure. 0x04000000
ipr 0000:01:01.0: Initializing IOA.
ipr 0000:01:01.0: Starting IOA initialization sequence.
ipr 0000:01:01.0: Permanent IOA failure. 0x04000000
ipr 0000:01:01.0: IOA taken offline - error recovery failed
ipr: probe of 0000:01:01.0 failed with error -5
_______________________________________________
Xen-ppc-devel mailing list
Xen-ppc-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ppc-devel
|
