[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Fwd: [Xen-users] fsck problem]
Hello, I run all CentOS-3.4/4 domU's and the problem lies in the CentOS 3.4 version of fsck, what i did to remedy the problem on CentOS 3.4 was to grab the CentOS 4 e2fsprogs-src rpm and build a new rpm with 'rpmbuild -ba /usr/src/SPECS/e2fsprogs.spec' this should build a new rpm that will work for you, im using file based images so i just mount em, change dir into the mounted filesystem and 'chroot .' this will allow you to build and install the rpm w/o the DomU being booted. Then boot normally and if it drops you to an fsck prompt just do 'fsck /' and in about 2 seconds you'll be up n running. Another gotcha with CentOS 4 thus far has been the fact that berkeley db was compiled with mutexes. Ive had to compile alot of custom rpm's for the 4.0 series as a result. Just fyi. Hope this helps ya out some :) John Fairbairn ---------------------------- Original Message ---------------------------- Subject: [Xen-users] fsck problem From: "stefan vetter" <comprende@xxxxxxxxx> Date: Mon, May 23, 2005 9:10 am To: xen-users@xxxxxxxxxxxxxxxxxxx -------------------------------------------------------------------------- hi, i'm trying to do following: centos4 dom0 with lvm, created an lv and restored an backup of an centos3 mashine to the lv. changed fstab, mtab so they match the config-file for xen. i get an error where the domU is complaining about the fsck-version - they are different in centos3 and -4, but what can i do, to restore an existing machine into a logical volume? thx for your help. by, stefan here the output when trying to start the domain: --- snip --- INIT: version 2.85 booting Welcome to CentOS Press 'I' to enter interactive startup. Configuring kernel parameters: [ OK ] modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.29-xenU/modules.dep (No such file or directory) hwclock is unable to get I/O port access: the iopl(3) call failed. Setting clock (localtime): Mon May 23 11:13:00 CEST 2005 [ OK ] Setting hostname web: [ OK ] modprobe: Can't open dependencies file /lib/modules/2.4.29-xenU/modules.dep (No such file or directory) modprobe: Can't open dependencies file /lib/modules/2.4.29-xenU/modules.dep (No such file or directory) Initializing USB controller (usb-uhci): modprobe: Can't open dependencies file /lib/modules/2.4.29-xenU/modules.dep (No such file or directory) [FAILED] Your system appears to have shut down uncleanly Press Y within 1 seconds to force file system integrity check... Checking root filesystem fsck.ext3: Filesystem has unsupported feature(s) (/dev/hda1) e2fsck: Get a newer version of e2fsck! [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/hda1 [FAILED] *** An error occurred during the file system check. *** Dropping you to a shell; the system will reboot *** when you leave the shell. Give root password for maintenance (or type Control-D to continue): --- /snip --- _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |