Linux version 2.6.12.5+xen-k8-osp (root@srv1) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 24 19:22:23 CEST 2005
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010000000 (usable)
0MB HIGHMEM available.
256MB LOWMEM available.
DMI present.
IRQ lockup detection disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro console=ttyS0
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Xen reported: 1861.706 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Linux version 2.6.12.5+xen-k8-osp (root@srv1) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 24 19:22:23 CEST 2005
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010000000 (usable)
0MB HIGHMEM available.
256MB LOWMEM available.
DMI present.
IRQ lockup detection disabled
Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro console=ttyS0
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Xen reported: 1861.706 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
vmalloc area: d0800000-fb7fe000, maxmem 34000000
Memory: 251848k/262144k available (1494k kernel code, 10196k reserved, 660k data, 124k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4628k freed
NET: Registered protocol family 16
PCI: Using configuration type Xen
xen_mem: Initialising balloon driver.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Probing PCI hardware
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Failed update VA mapping: d0800000, 113a6063, 00000000

------------[ cut here ]------------
kernel BUG at include/asm-xen/hypervisor.h:465!
invalid operand: 0000 [#1]
Modules linked in:
CPU:    0
EIP:    0061:[<c014d7cf>]    Not tainted VLI
EFLAGS: 00011282   (2.6.12.5+xen-k8-osp) 
EIP is at vmap_pte_range+0xef/0x130
eax: 0000003d   ebx: d0800000   ecx: 00000000   edx: 00000992
esi: 113a6063   edi: d0800000   ebp: ffffffea   esp: c12dff20
ds: 007b   es: 007b   ss: 0069
Process swapper (pid: 1, threadinfo=c12de000 task=c1282a20)
Stack: c0283660 d0800000 113a6063 00000000 c12de000 cffb2000 c0102d08 d080c000 
       d080c000 d080bfff c014d87e c0102d08 d0800000 d080c000 00000063 c12dff80 
       c127ddc0 00000020 0000000c c1287ce0 c014dde0 c1287ce0 00000063 c12dff80 
Call Trace:
 [<c014d87e>] map_vm_area+0x6e/0xb0
 [<c014dde0>] __vmalloc_area+0xc0/0x110
 [<c014ded0>] vmalloc+0x20/0x30
 [<c0195b54>] cramfs_uncompress_init+0x24/0x70
 [<c032d9af>] init_devpts_fs+0x2f/0x40
 [<c032d9c8>] init_cramfs_fs+0x8/0x20
 [<c031e7ec>] do_initcalls+0x2c/0xd0
 [<c0105070>] init+0x0/0x110
 [<c0105070>] init+0x0/0x110
 [<c0105095>] init+0x25/0x110
 [<c01074f0>] kernel_thread_helper+0x0/0x10
 [<c01074f5>] kernel_thread_helper+0x5/0x10
Code: 85 77 ff ff ff 31 c0 83 c4 18 5b 5e 5f 5d c3 89 74 24 08 89 7c 24 04 c7 44 24 0c 00 00 00 00 c7 04 24 60 36 28 c0 e8 d1 d0 fc ff <0f> 0b d1 01 69 2c 28 c0 eb aa c7 44 24 0c 60 00 00 00 c7 44 24 
 <0>Kernel panic - not syncing: Attempted to kill init!