[Xen-users] Re: Major problems with 2.0.7 and SATA drives

[Alexander <alex@xxxxxxxxxx>]

Irqs are not being shared, I just checked:
17:    6039746        Phys-irq  libata
19:          0        Phys-irq  ohci_hcd:usb1, ohci_hcd:usb2 

I actually only have 4 GB of memory, so pae is not necessary and we don't 
want to run 64 bit yet. 

Any other suggestions? 

Ernst Bachmann writes: 

> On Wednesday 21 September 2005 12:47, Alexander wrote:
> > Hello everyone, 
> >
> > I'm hoping to find an answer to my problem here. Currently I'm installing
> > xen 2.0.7 on 30 dual opteron machines with 4GB memory. The machines have
> > Tyan K8SR as motherboard with Silicon Image 3114 chip sata controler and 2
> > x 300 GB Western Digital SATA drives. Each xen server has 5 domUs, where
> > some of them have high traffic and thus require high disk usage. On certain
> > machines, I'm experiencing the following problem, after a while, I get this
> > error in dom0's dmesg: 
> >
> > TA: abnormal status 0xD0 on port 0xD080EC87
> > ATA: abnormal status 0xD0 on port 0xD080EC87
> > ATA: abnormal status 0xD0 on port 0xD080EC87
> > ata1: command 0x35 timeout, stat 0x51 host_stat 0x61
> > ata1: status=0x51 { DriveReady SeekComplete Error }
> > ata1: error=0x04 { DriveStatusError }
> Could you check /proc/interrupts if your SATA IRQ's are shared with some other 
> hardware, maybe the USB-Controller? 
>
> Oh, and with your hardware, you'd maybe want to consider running xen-3
> (unstable) instead of xen-2.0.7, so you can get access to all your memory 
> (with 64 bit mode or PAE) 
>
> /Ernst 
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users