[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-users] network troubles...
- To: Andrew Olds <aolds@xxxxxxxxxx>
- From: The Smoking Man <datashark@xxxxxxxxx>
- Date: Fri, 7 Oct 2005 18:07:57 +0100
- Cc: xen-users@xxxxxxxxxxxxxxxxxxx
- Delivery-date: Fri, 07 Oct 2005 17:05:30 +0000
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:references; b=Tzno1jw6QMZQeb0KxbEZaNSXk+Jbj+tb7zG40jxJLkshpaz8FmjSUja5r7F+e5lA54CsB0GAy7+a7bYPwqI2aDA24sxGKwrzAHTOA3mekkJc+1kM+kXvb1Go/70ntVrLcmhwCBXUvz/7zBuTms8m3Zsmps3D2vwo/asw01LmiEI=
- List-id: Xen user discussion <xen-users.lists.xensource.com>
hi all.
In the end it was all resumed to a PATH problem in ...
/etc/xen/scripts/vif-bridge. It happens that brctl and ifconfig are
sillenly dying with xen original config due to not being in the
expected PATH.
replacing (in /etc/xen/scripts/vif-bridge) brctl by /sbin/brctl
and ifconfig by /sbin/ifconfig solved everything. I have now xen
running smoothly and stably and a dual opteron (tyan 2882) with 10GB of
RAM.
Best regards.
On 10/6/05, Andrew Olds <aolds@xxxxxxxxxx> wrote:
hi
have you had any joy in getting your networking running between dom0
and U. I am having the same problem but have been unsuccessful in
finding any doco or answers.
Regards Andrew
Hi all,
I've
installed latest xen (3.0) on a clean box under gentoo
(32bits). Dom 0 boots fine. DomUs also. trouble is that i cannot get
networking to work between Dom)/DomU in any way :( (there
are no afaik abnormal stuff in xen log btw)
i also updated /etc/xen/scripts/network-bridge to work under gentoo as stated i de -devel ML.
bellow are my configs.
Any help hint would be greatly appreciated.
/etc/xen/xend-config.sxp
# Xend configuration file. (xend-port 8000) (xend-event-port 8001) (xend-address 'localhost') (console-port-base 9600) (console-address 'localhost')
#(network-script network-route) #(vif-script vif-route) (network-script network-bridge) (vif-bridge xen-br0) (vif-script vif-bridge) (vif-antispoof no) (block-file block-file)
(block-enbd block-enbd) (dom0-min-mem 0) (dom0-cpus 0) ____
DomU config
kernel = "/boot/vmlinux-syms-2.6.12-xenU" memory = 2048 name = "g2" # dhcp = "dhcp"
nics = 1 #ip = "192.168.10.190/28" ip = "off" vif = [ 'mac=aa:bb:cc:dd:ee:01', 'bridge=xen-br0' ] disk = [ 'phy:/dev/sdd1,sda1,w' , 'phy:/dev/sdh1,sda10,w' , 'phy:/dev/sdi1,sda11,w' ]
on Dom 0...
osiris tree # ifconfig eth0 Link encap:Ethernet HWaddr 00:E0:81:2C:71:E6 inet
addr:192.168.10.188 Bcast:192.168.10.255 Mask:255.255.255.0 UP
BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3047 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:285049 (278.3 Kb) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:614 (614.0 b) TX bytes:614 (
614.0 b)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP
BROADCAST RUNNING NOARP
MULTICAST MTU:1500 Metric:1 RX packets:53953 errors:0 dropped:0 overruns:0 frame:0 TX packets:4832 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4323826 (
4.1 Mb) TX bytes:3737539 (3.5 Mb) Interrupt:24
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP
BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:493 errors:0 dropped:0 overruns:0 frame:0 TX packets:49854 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:82755 (80.8 Kb) TX bytes:3787362 (3.6 Mb)
xen-br0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet
addr:192.168.10.188 Bcast:192.168.10.255 Mask:255.255.255.0 UP
BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7293 errors:0 dropped:0 overruns:0 frame:0 TX packets:4374 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:563051 (549.8 Kb) TX bytes:3652132 (3.4 Mb)
osiris # brctl show bridge
name bridge
id
STP enabled interfaces xen-br0
8000.feffffffffff
no peth0 vif0.0
brctl showmacs xen-br0 port
no mac
addr is
local? ageing timer 2
00:00:1d:f4:c7:69
no
0.00 2
00:60:08:f6:03:bf
no
273.79 2
00:e0:63:02:0e:c0
no
4.94 2
00:e0:63:02:1f:c0
no
7.93 2
00:e0:63:03:17:c0
no
2.94 2
00:e0:63:03:1d:00
no
7.93 2
00:e0:63:03:1f:c0
no
9.92 2
00:e0:63:03:b1:40
no
4.94 2
00:e0:63:03:df:40
no
5.94 2
00:e0:63:03:e3:00
no
0.95 2
00:e0:63:09:c7:2f
no
0.33 2
00:e0:63:0a:8e:00
no
0.53 2
00:e0:63:0a:92:00
no
1.94 2
00:e0:63:0a:99:c0
no
0.95 2
00:e0:63:37:73:8e
no
8.92 1
fe:ff:ff:ff:ff:ff
yes 0.00
Many thanxs in advance and have a nice weekend.
ALl the best.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|