AW: [Xen-users] SuSE 10 no network in dom0 - arp problem?

["Arnd Schmitter" <arnd_xen@xxxxxxxx>]

Are you using the default network script shipped with xen ?

What's the configuration of your network bridge ? What say brctl ?


> -----Ursprüngliche Nachricht-----
> Von: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-
> bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag von Robert Welz
> Gesendet: Montag, 17. Oktober 2005 14:13
> An: Stephan Böni
> Cc: Xen-users@xxxxxxxxxxxxxxxxxxx
> Betreff: Re: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> 
> Hello.
> That didn't help.
> 
> I see the same arp broadcast storms as before.
> 
> Robert
> 
> 
> Am 17.10.2005 um 13:58 schrieb Stephan Böni:
> 
> > Try  'export LC_MESSAGES=POSIX'  before starting xend. The Xen network
> > script has problems parsing your ifconfig because its german.
> >
> > Stephan
> >
> >
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: Robert Welz [mailto:r_welz@xxxxxx]
> >> Gesendet: Montag, 17. Oktober 2005 13:45
> >> An: Stephan Böni
> >> Cc: Xen-users@xxxxxxxxxxxxxxxxxxx
> >> Betreff: Re: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> >>
> >>
> >> Here it is:
> >>
> >>
> >> eth0      Protokoll:Ethernet  Hardware Adresse 00:0E:0C:72:41:41
> >>            inet Adresse:192.168.2.128  Bcast:192.168.2.255  Maske:
> >> 255.255.255.0
> >>            inet6 Adresse: fe80::20e:cff:fe72:4141/64
> >> Gültigkeitsbereich:Verbindung
> >>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >>            RX packets:7 errors:0 dropped:0 overruns:0 frame:0
> >>            TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
> >>            collisions:0 Sendewarteschlangenlänge:0
> >>            RX bytes:498 (498.0 b)  TX bytes:2064 (2.0 Kb)
> >>
> >> lo        Protokoll:Lokale Schleife
> >>            inet Adresse:127.0.0.1  Maske:255.0.0.0
> >>            inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
> >>            UP LOOPBACK RUNNING  MTU:16436  Metric:1
> >>            RX packets:107 errors:0 dropped:0 overruns:0 frame:0
> >>            TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
> >>            collisions:0 Sendewarteschlangenlänge:0
> >>            RX bytes:8414 (8.2 Kb)  TX bytes:8414 (8.2 Kb)
> >>
> >> peth0     Protokoll:Ethernet  Hardware Adresse FE:FF:FF:FF:FF:FF
> >>            inet6 Adresse: fe80::fcff:ffff:feff:ffff/64
> >> Gültigkeitsbereich:Verbindung
> >>            UP BROADCAST NOARP MULTICAST  MTU:1500  Metric:1
> >>            RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >>            TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >>            collisions:0 Sendewarteschlangenlänge:1000
> >>            RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> >>            Basisadresse:0x9000 Speicher:d6800000-d6820000
> >>
> >> vif0.0    Protokoll:Ethernet  Hardware Adresse FE:FF:FF:FF:FF:FF
> >>            inet6 Adresse: fe80::fcff:ffff:feff:ffff/64
> >> Gültigkeitsbereich:Verbindung
> >>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >>            RX packets:28 errors:0 dropped:0 overruns:0 frame:0
> >>            TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
> >>            collisions:0 Sendewarteschlangenlänge:0
> >>            RX bytes:2064 (2.0 Kb)  TX bytes:588 (588.0 b)
> >>
> >> xenbr0    Protokoll:Ethernet  Hardware Adresse FE:FF:FF:FF:FF:FF
> >>            inet6 Adresse: fe80::200:ff:fe00:0/64
> >> Gültigkeitsbereich:Verbindung
> >>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >>            RX packets:27 errors:0 dropped:0 overruns:0 frame:0
> >>            TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
> >>            collisions:0 Sendewarteschlangenlänge:0
> >>            RX bytes:1596 (1.5 Kb)  TX bytes:378 (378.0 b)
> >>
> >>
> >> Am 17.10.2005 um 13:16 schrieb Stephan Böni:
> >>
> >>
> >>> Please mail me your "ifconfig" output.
> >>>
> >>> Stephan
> >>>
> >>>
> >>>
> >>>
> >>>> -----Ursprüngliche Nachricht-----
> >>>> Von: Robert Welz [mailto:r_welz@xxxxxx]
> >>>> Gesendet: Montag, 17. Oktober 2005 12:10
> >>>> An: Xen-users@xxxxxxxxxxxxxxxxxxx
> >>>> Betreff: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> >>>>
> >>>>
> >>>> Hello.
> >>>> I have installed the SuSE Linux 10 XEN kernel but no domU
> >>>>
> >> yet. Now I
> >>
> >>>> cannot ping to and from dom0. I get lots of ARP broadcasts
> >>>>
> >> from dom0
> >>
> >>>> but dom0 seems to ignore ARP answers. When pinging to dom0 it
> >>>> ignores
> >>>> arp requests. This happens regardless xend is running or not. This
> >>>> happens in the xen kernel only, when booting stock kernel all works
> >>>> as expected.
> >>>>
> >>>> What can I do?
> >>>>
> >>>> Robert
> >>>>
> >>>> _______________________________________________
> >>>> Xen-users mailing list
> >>>> Xen-users@xxxxxxxxxxxxxxxxxxx
> >>>> http://lists.xensource.com/xen-users
> >>>>
> >>>>
> >>>>
> >>>
> >>> _______________________________________________
> >>> Xen-users mailing list
> >>> Xen-users@xxxxxxxxxxxxxxxxxxx
> >>> http://lists.xensource.com/xen-users
> >>>
> >>>
> >>
> >>
> >
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> 
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.12.1/136 - Release Date: 15.10.2005







___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: 
http://mail.yahoo.de


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users