[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Error "Device 0 (vif) could not be connected"

wei huang wrote:

And I find entry like this in /var/log/messages after xm create fails:

Nov  7 20:40:56 c5xen kernel: e100: peth0: e100_watchdog: link up, 100Mbps, 
Nov  7 20:40:56 c5xen kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov  7 20:40:57 c5xen kernel: xenbr0: port 2(peth0) entering learning state
Nov  7 20:40:57 c5xen kernel: xenbr0: topology change detected,
Nov  7 20:40:57 c5xen kernel: xenbr0: port 2(peth0) entering forwarding state
Nov  7 20:41:44 c5xen ntpd[3633]: synchronized to LOCAL(0), stratum 10

Nov  7 20:42:47 c5xen logger: /etc/xen/scripts/vif-bridge: brctl addif xenbr0 
vif1.0 failed

Well, that would be the fatal failure.

You seem to have created bridges successfully so assuming you have brctl
on your system. But try doing the above step (adding the interface to the
bridge) manually.

Also, put a set -x in your /etc/xen/scripts/network-bridge and
/etc/xen/scripts/vif-bridge script, and post their output found
in /var/log/xen-debug.log. Could be an older version of brctl
which doesn't return status (?).


Nov  7 20:42:48 c5xen ntpd[3633]: synchronized to, stratum 2
Nov  7 20:43:52 c5xen ntpd[3633]: kernel time sync enabled 0001

This is the only problem I can find. Would you please give more


Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.