[Xen-users] nfs - another question

[Stephan Seitz <s.seitz@xxxxxxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

hi!

i've got a very weird problem, when using root_nfs in domU's.

i'm currently running cownfsd, which i am able to use locally and
remotely via
mount -t nfs

but, when using this share in a domU, it doesn't mount as root.

domU shows following bootmsg:

- ------
Linux version 2.6.12.6-xenU (root@xen-01) (gcc-Version 3.4.4 20050314
(prerelease) (Debian 3.4.3-13)) #6 SMP Thu Nov 17 12:20:09 CET 2005
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000006000000 (usable)
104MB LOWMEM available.
IRQ lockup detection disabled
Built 1 zonelists
Kernel command line:
ip=192.168.10.201:192.168.10.200:192.168.10.1:255.255.255.0:mosixen-01:eth0:off
root=/dev/nfs rw nfsroot=192.168.10.200:/mosiXen-01 2VMID=1
Initializing CPU#0
PID hash table entries: 512 (order: 9, 8192 bytes)
Xen reported: 2090.552 MHz processor.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
vmalloc area: c7000000-fbff5000, maxmem 34000000
Memory: 92672k/106496k available (2820k kernel code, 5368k reserved,
748k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
Brought up 1 CPUs
NET: Registered protocol family 16
xenbus_probe_init
Brought up 1 CPUs
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
Grant table initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Coda Kernel/Venus communications, v6.0.0, coda@xxxxxxxxxx
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Xen virtual console successfully installed as tty1
Event-channel device installed.
Registering block device major 8
xen_net: Initialising virtual ethernet driver.
register_blkdev: cannot get major 8 for sd
aoe: aoe_init: AoE v2.6-10 initialised.
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3386.400 MB/sec
raid5: using function: pIII_sse (3386.400 MB/sec)
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
NET: Registered protocol family 2
IP: routing cache hash table of 256 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
IP-Config: Complete:
      device=eth0, addr=192.168.10.201, mask=255.255.255.0,
gw=192.168.10.1,
     host=mosixen-01, domain=, nis-domain=(none),
     bootserver=192.168.10.200, rootserver=192.168.10.200, rootpath=
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Looking up port of RPC 100003/2 on 192.168.10.200
Looking up port of RPC 100005/1 on 192.168.10.200
RPC: call_verify: program 100005, version 1 unsupported by server
192.168.10.200
Root-NFS: Server returned error -5 while mounting /mosiXen-01
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)
- ----

as said, mount works:

- ----
xen-01:~# mount -t nfs 192.168.10.200:/mosiXen-01 /mnt
xen-01:~# df
[...]
192.168.10.200:/mosiXen-01
                        976568    488280    488288  50% /mnt
- ----

i don't know what to setup in the domU's kernel, to get this working.

If someone of you does have any idea about this error?

I'm pretty sure that my settings /etc/xen/mosixen settings are right, as
this machine works without changing the settings, but with kernel-nfsd
at dom0 as server.


Thanks

Stephan Seitz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDfLGC0MKSfkbzHDYRAgYSAJwKYceY1GheM3rsd/lXqK5u7dTDTQCgoK+C
II6Vkf5ceNXRpfNZsJTzmdY=
=oUBz
-----END PGP SIGNATURE-----


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users