[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] how to run knoppix under xen


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: Mustafa Abbasi <lordverminard@xxxxxxxxx>
  • Date: Wed, 30 Nov 2005 13:37:48 +0500
  • Delivery-date: Wed, 30 Nov 2005 08:41:27 +0000
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type; b=ZyNvqybu7okrDGzseb1n7dxMrDffHYnQgtlcpFuwccWGPJwoJ+zlPHNjXO85cMlERrvswMdj/3g5/34pabsTGjk9kNsS1w6oKqC20kRuokMQXzFiO3suJ0CfXNNEYV+JezIhMNLdE08XtzyNMipdF6tIcVsjMdEKHZecdGhpAQE=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

i saw a screen shot of knoppix beeing run under xen but for some reason i can't do that.
here if the config file i use.
kernel = "/boot/vmlinuz-2.6-xenU"
memory = 64
name = "ttylinux"
nics = 1
ip = "1.2.3.4"
disk = ['phy:hdc,hdd,r']
root = "/dev/hdd ro"

hdc is my cdrom and it was unmounted at the time.
here the output i got.

CPU: CLK_CTL MSR was 0. Reprogramming to 20000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: AMD Sempron(tm)   2400+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
NET: Registered protocol family 16
xen_mem: Initialising balloon driver.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Xen virtual console successfully installed as tty
Event-channel device installed.
xen_blk: Initialising virtual block device driver
 hdd:<6>xen_net: Initialising virtual ethernet driver.
 unknown partition table
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
IP-Config: Guessing netmask 255.0.0.0
IP-Config: Complete:
      device=eth0, addr=1.2.3.4, mask=255.0.0.0, gw=255.255.255.255,
     host=1.2.3.4, domain=, nis-domain=(none),
     bootserver=1.2.3.4, rootserver=1.2.3.4, rootpath=
VFS: Mounted root (iso9660 filesystem) readonly.
Freeing unused kernel memory: 112k freed
Warning: unable to open an initial console.
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

any help.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.