[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] domU network configuration question


  • To: <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Bill Kelly" <billk@xxxxxxx>
  • Date: Mon, 5 Dec 2005 11:20:07 -0800
  • Delivery-date: Mon, 05 Dec 2005 19:18:40 +0000
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hi,

I've installed xen-2.0.7, and I'm trying to get networking in my
domU set up correctly.

My server has one NIC, but five IP addresses.  My dom0 uses the
first IP address.  I'd like my domU to use the second IP address.

Originally my /etc/network/interfaces on the dom0 defined interfaces
for the first two IP addresses as:

 auto eth0
 iface eth0 inet static
 address 69.93.218.2
 netmask 255.255.255.248
 gateway 69.93.218.1

 auto eth0:0
 iface eth0:0 inet static
 address 69.93.218.3
 netmask 255.255.255.248

I have removed "eth0:0" from dom0, but I would like that 69.93.218.3
IP address to be assigned to the domU.  My domU /etc/network/interfaces
now looks like:

 auto eth0
 iface eth0 inet static
 address 69.93.218.3
 netmask 255.255.255.248
 gateway 69.93.218.1

As you can see, I just copied what used to be "eth0:0" on dom0, and
put it in the domU (adding the gateway parameter from dom0's eth0.)

However, this doesn't appear to be working. The domU boots up, and the interface is there with correct-looking parameters - but I can't
ping anything.

If anyone can point out what I'm doing wrong, it'd be most
appreciated.

Thanks!

Regards,

Bill



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.