[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-users] xen 3.0 routing
- To: xen-users@xxxxxxxxxxxxxxxxxxx
- From: Sanjay Upadhyay <glowfriend@xxxxxxxxx>
- Date: Fri, 9 Dec 2005 18:22:55 +0530
- Delivery-date: Fri, 09 Dec 2005 12:53:53 +0000
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=Cs+UtvdL0P4fvFxrSdWIyTV64nWtE6+InaFRRcIusA5l8N2ayJpETIjvtK9yReLxQQ/RKyzUClPmeycuLnjcRzI0+aJtSnX+aDtVpFQsSIUQnR9gG2AuEvMndNCbDohINiC2FBq11tZ9HSseeHScNidIoI1w/ko/ZuAdj003pSA=
- List-id: Xen user discussion <xen-users.lists.xensource.com>
Hi
It seems the networking is having problem in the developmet version of the xen.
any lamps could help ..
In 2.0.7 code base, when installed, I saw that xenbr0 used to have an
IP address which was the Host's IP address, however, now it seems to be
not having an IP. When manually set (by 'ifconfig xenbr0 192.168.11.1')
and rebooting the domU's which have
vif = [ 'bridge=xenbr0']
I see the problem solved.. However I am a lay man, would be gratefull to get some insight.
regards
Sanjay Upadhyay
On 12/9/05, PAINCHAUD Christophe <cpainchaud@xxxxxxxxxxx> wrote:
> Hi there
>
> I would like to know if there is somwhere in the web a good howto on
> routing and network configuration for XEN v 3.0
>
> I successfully installed a XEN 3.0 domain0, with a single domainU.
> Network doesn't work at all. At the moment i can't ping from the
> domain0 any host of my LAN and obviously i can't reach the domain0
> from any of my host in LAN.
>
> Thanks for any help.
>
> These are the output of the ifconfig command and of route -n command.
What about your iptables ?
Christophe PAINCHAUD
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
